Version control and multiuser access on one project
Hello,
I have a question is there a tool from National Instruments or a third party supplier, with which I can controll the programmed versions of the LabVIEW Code and makes it possible that more than one person works at one time at a project.
Best regards
TED
Ted,
Please refer to the discussion topic (...LabVIEW>LabVIEW General>Topics...) regarding Programming guidelines. There is a bit of discussion in that thread about source code control and project management.
This is a very difficult subject to learn, especially when applied to LabVIEW coding, as all the information out there is strictly limited to text based programming.
I suspect (I know for a fact...) that there are materials in the works that would pertain to this exact subject. Keep your eyes on the NI website under reference materials that may speak of such subjects.
Good luck
Similar Messages
-
Oracle Service Bus Configurations version control and deployment automation
Hi,
Currently we have OSB10gR3 installed and we use the web based sbconsole to create projects and proxy services. It's all working well and good!!
We are at the state where we need to think about source control, migration of artifacts from dev to test and to prod.
I'm looking for pointers to version control the artifacts of OSB projects, what could be version controlled (no binaries) and how do we extract those artifacts?
How do we customize those artifacts while migrating to different environments in an automated fashion?
Please point me to best practices and gotchas that we should be aware of while dealing with deploying OSB proejcts from test to Prod.
Thanks in Advance!!After reading the threads mentioned by Deba, I'm able to get this all worked out with SBConsole itself. Experts, please review my approach below and let me know if I have overlooked anything.
Simple advantage I see in using sbconsole is that it requires less maintenance, i.e. avoids rolling out another IDE (Eclipse -Workshop plug-in) to IT developers and at the same time provides the functionality that we are looking for. Currently, JDeveloper is our primary IDE, so we thought it's best to wait till OSB development gets integrated into JDev.
This is the deployment workflow which worked for us,
Developer:
1)Develops Proxy services using SBconsole in Dev environment.
2)Creates sbconfig.jar by using the export functionality available in System Administration link in sbconsole
3)Checks-in ALL the files present in the above jar into version control under the proxy service project name
4) Creates customization file using the customization file link in System Administration and modifies the value for each environment i.e. creates two files test_customfille, prod_customfile
5)Checks-in the customization files into version control under the same proxy service project
Promotion to Test and Prod
1) From the source control, service proxy is built (actually the jar file of all files including the custom file is created)
2) SCP proxy_sbconfig.jar file to Test or Prod box
3) Follow the steps mentioned in Auto deploy of ALSB/OSB artifacts - Proxy, WSDL and webservices...
4) Depending on the server, test or prod, pick the right customization file and deploy using ANT.
Thanks!! -
Version control and deployment strategies
Hi,
I was looking for input from the community on general
strategies for using version control and managing deployments to
test/stg/production.
Currently, I am using subversion to track my source code, and
using the standard flex builder build routine to produce my binary
output and test. My output is stored locally on a shared vmware
drive, so that it can be served up with a linux vm running apache
(this is not dissimilar to just local testing)
Now I'm getting ready to deploy to some remote testing server
though, so I'm trying to think of the best way to go about it. I
would like to tag my code in svn with a release tag, as is my
practice in other platforms. Should I also store the bin folder in
svn? Should I check in the resulting binary code independently in a
separate repository/directory and then tag it there? Should I
create a new build target to deploy directly to my testing server?
The issue with the tagging approach seems to be that if I
want to rebuild the code or redeploy it for any reason, I would
have to checkout the tagged code in a separate directory, import it
as a new project, rebuild and then redeploy.
If I checked in the tested binaries into a separate
repository/folder, I could always just do an svn export for
deployment, but I'm not sure if that would cause any weird issues,
and it seems a bit wasteful. I suppose I could build from the tag
and zip up the resulting release and just make it available via
normal download, but it seems that I would likely then have lots of
working directory checkouts as flex builder projects for each tag
or release, just so that I could rebuild from them....doesn't seem
very elegant.
I'm very interested in hearing any feedback on this. How do
you do it?
thanks,
Cliffflex with ant is still not very very popular
combination,since FB does all for you anyways, but I have to say
ant is lot more flexible, especialy if you combine it with FB, ant
can do pretty much anything, ...
here is link about flex's ant tasks
http://livedocs.adobe.com/flex/3/html/help.html?content=anttasks_1.html
most of the projects I have done in Flex were with ant,
here is general approach:
for internal testing I let flex builder build and deploy
within integrated tomcat,this is also where I do debugging, FB is
pretty good about that.
then I have following targets :
build target - builds optimized version of flex app, only
using library classes that are needed by project, also using that
to feed my Modules building tasks so that they exclude all class
references (like Button, Tabnavigation etc... ) from their compiled
units,
something like this (this is my old fb2 example) i don't have
fb3 example handy right now :
quote:
<mxmlc file="${basedir}/main.mxml"
debug="false"
optimize="true"
output="${dir.web}/main.swf"
show-binding-warnings="false"
show-actionscript-warnings="false"
link-report="${basedir}/docs/my-links.xml"
use-network="true">
<load-config
filename="/configdir/modified/flex-config.xml"/>
<source-path path-element="${FLEX_HOME}/frameworks"/>
<compiler.library-path dir="." append="true">
<include name="lib" />
</compiler.library-path>
<compiler.source-path path-element=""/>
<compiler.source-path path-element="src"/>
<metadata description="some app">
<contributor name="John Doe" />
<contributor name="Apple Orangino" />
</metadata>
</mxmlc>
<!-- compile module mymodule-->
<mxmlc file="${basedir}/mymodule.mxml"
debug="false"
optimize="true"
output="${dir.web}/mymodule.swf"
show-binding-warnings="false"
show-actionscript-warnings="false"
load-externs="${basedir}/docs/my-links.xml"
use-network="true" >
<load-config
filename="/configdir/modified/flex-config.xml"/>
<source-path path-element="${FLEX_HOME}/frameworks"/>
<compiler.source-path path-element=""/>
<compiler.source-path path-element="src"/>
<metadata description="some app">
<contributor name="John Doe" />
<contributor name="Apple Orangino" />
</metadata>
</mxmlc>
tag -target tags release based on parameter of latest tag
plus number increment I configure in properties file.
Utility targets :
classpath target - builds classpath string for compc task.
commit target : commits source code, before building.
resources target - copies all resources files to build
directory,
deploy-local target- deploy to local Integration server
deploy-remote target deploy to remote uat server.
test -target - run test cases over classes and generate
report.
and of course all famous asDoc target :)
good thing is that you can create "ant builder" under project
properties and chain your targets with flexbuilder's build
commands,
you can also easily integrate with build servers ( I use
hudson)
here is example :
http://hudson.amostudio.com/
MR hudson checks out code for you, builds it using ant
targets you tell it to use, and reports to you, its pretty cool and
very handy to always have active build proccess over codebase, of
course in some cases its overkill, but most of the times, MR hudson
is good to have.
unfortunately all my ant files are for external clients I
cant disclose them, but I can write blog about some general (apples
and oranges) example, hhm that's actually good idea :) I can shake
off some stress as well :)
thanks for the idea :)
hth
regards
levan -
Wireless remote control and FM transmitter in one?
Hello.
Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
Other ideas or a combination of products to accomplish this much appreciated!
thanks
iPod 80 GB Windows XPI spent some time (2 hrs) again with the vendor, trying to solve the issue.
The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
It is quite a surprise that I couldn't find any information on the use (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
Thank you -
I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?
You need to give a lot more information about the media specifications and the project properties you're using in the different projects.
-
After I updated to yosemite my iMovie will not open. I have found the folders in the applications folder for both versions 9 and 10 but neither one opens when I double click on the icon. How do I remedy this?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Version control and configuration management
How is version control and configuration management done for iPlanet6 web
and app servers?I'm not sure if I understand exactly what you are asking. Neither iWS or
iAS have built in version control or configuration management. But
pretty much everyone integrates them with version control or SCM in some
way. Ranging from the complex (say integrating iAS and Interwoven) to
the simplistic (using CVS to track HTML documents or source code).
David
Chris Valliere wrote:
How is version control and configuration management done for iPlanet6 web
and app servers? -
Version Control and Dreamweaver CS5.5
Hello-
I want to install version control on both a shared Bluehost server and a dedicated Hostgator server, sites on both I manage with DW CS5.5.
I've read the help articles but it seems they are targeted at installing svn on your local machine, and I want to install it on my remote servers. I realize this is not a Dreamweaver specific question but wondered if there are any obvious paths to this someone might know of.
I do have svn installed on my bluehost server, but haven't yet been able to figure out how to set up a repository there yet. So when I do
svn --version, it shows me all the version info, indicating it was successfully installed, but I haven't been able to set up a repo yet, via ssh. Can this be done in DW or do I have to get it done via SSH on the server first, then set the path to it in the version control tab of the site set up/management tabs AFTER I accomplish setting it up via SSH on the server first?
Thanks very much in advance...
LauraSo here is where I am with it if you have any suggestions I'd appreciate it:
Hostgator tech support helped me get it back to 1.7.5 (no explanation for how it became 1.6 after I installed and verified 1.7.5, odd)
So here was the interaction but I'm still (stupidly I'm sure) stuck:
From tech support:
You *should* be able to communicate with a SVN 1.7.5 server with a svn 1.6 client without issue.
1) When I run svn --version on your , I show version 1.7.5:
[~]# svn --version
svn, version 1.7.5 (r1336830)
compiled Jun 28 2012, 22:37:11
Yes, the user and password for SVN must be set up within svn. Here is a brief outline of setting up a repository.:
First, create the repository:
svnadmin create ~/myrepository
Edit the configuration file for the newly created reposiroty:
nano ~/myrepository/conf/svnserve.conf
Add the following, presuming you want no anonymouse access and write access for authenticated users:
anon-access = none
auth-access = write
password-db = passwd
Open up the passwd file to create it and ready it for editing:
nano ~/myrepository/conf/passwd
Add your password to it like so:
exampleuser = examplepassword
Import your project to it (if any):
svn import /path to your project/myD5project file:///home/juicyserveradmin/myrepository
Start and daemonize the svn server:
svnserve -d
You should now be able to check out your project from DreamWeaver.
4) SVN typically runs on port 3690. Port 2223 is your SSH port. If DreamWeaver allows your to connect to SVN via SSH, then it will be over port 2223 - in this case you would need ot provide your SSH login credentials.
What I'm still stuck on:
I added the repo as he said, ~/repos
I added two users/passwords to the file (not sure how to confirm I did it right though)
I'm stuck on this step:
svn import /path to your project/myD5project file:///home/juicyserveradmin/myrepository
Here is how it's set up now, if you could help me think through what makes sense I'd really appreciate it.
I've got my live site, example.com
We've been doing all of our development work live on the front end which is of course a terrible idea and constantly causes issues where problems are showing up live.
So i set up dev.example.com which is within the main example.com directory called /dev and as a subdomain.
I also set up /dev2 the same way.
The only difference is that /dev is set on cron to have all of example.com main files copy to it once a day, so it stays more or less in sync.
/dev2 is not being synced that way.
My idea was then I've got two dev folders we can do work in, one that syncs and one that stays static.
I want to have svn working for all 3....the live site, the /dev and the /dev2.
So would I need to create repos in each of those 3? Or just one repo? file names would be the same in all three so it seems like there would need to be repolive, repodev , repodev2 or something like that?
I want the same user/pass at the moment for all 3.
Then I'm back to not quite sure how to set that up in DW, and, what to import into each if that's the best way to do it?
Also I was confused about the path command above.
In the scenario above can you create that path for me to see exactly how I should paste it in if I do three repos, if, and please tell me, if doing it that way even makes sense?
For DW server settings, is the sever address the IP address of my dedicated server?
And I'm not sure what to put for Repository Path given the questions above.
Thanks again for your patience and help...
Also:
I see from this link
http://civicactions.com/blog/2010/may/25/how_set_svn_repository_7_simple_steps
That I would maybe want to set up different directories within the /repos directory for the three versions of the site, live, dev and dev2?
I'm still confused about the format of the path.
Would it be like
svn mkdir file:///nameofmyhomedir/repos/live
svn mkdir file:///nameofmyhomedir/repos/dev
svn mkdir file:///nameofmyhomedir/repos/dev2
Where I want the directories to be named live,dev and dev2?
Can you correct that path for me if that's not quite right?
I do see in DW now for my local site that I've got + next to all the files after setting up the Version Control server, but, because I don't have the path to the repo right I guess or the server address right...it says it can't connect:
Access: Subversion
Protocol: SVN
Server Address: My IP address?
Repository Path: Not sure if I did ~/repos what the full path to it on my server is?
Server Port: 3690
username/pass what I set up in the file according to his directions.
Can you steer me towards dialing this in right pretty please?
Thanks in advance for any help. -
Lightweight Version Control and/or IDE ?
Summary:
I would like to know if anyone has any suggestions for a light-weight version control system ? A light-weight IDE would also be of interest (more advanced than TextPad, less complicated than Eclipse).
I would have stuck this in the IDE forum, but it seems their isn't one.
Details:
Previously, I have been doing my Java development using a text editor (TextPad), and doing most everything manually. I like this approach, because I understand everything that is going on.
I recently ventured out in the hopes of implenting version control. Going with what's popular, I set up CVS on my Linux server and access it using Eclipse on my PC. I would just continue using TextPad, but I like how Eclipse provides a nice GUI front-end for CVS functions.
Unfortunately, I've found the whole CVS/Eclipse setup to be buggy and convoluted. I still don't have CVS set up quite right. I can't seem to tag anything with a version, and I still don't know how to properly set up access privelidges (for simplicity, I ended up using chmod 777 on all CVS directories and files).
This whole setup seems to require intricate Linux, CVS, and Elipse knowledge. Now, instead of working on my Java application, I spend most of my time trying to better learn Linux, CVS, and Eclipse. Progress on my projects have ground to a halt. Every problem I encounter requires hours of research to resolve, and it often results from not understanding the complicated inner workings of one of these insufficiently documented products.
In the end, I really just wanted some version control for my software with a user-friendly GUI front end. I have no wish to be a Linux expert, or a CVS expert, or an Eclipse expert. I just want to be a user, so I can get on with doing my real work -- Java programming.
<rant>
I find Linux in particular to be especially difficult to grasp. It's not that the O/S is complicated. It's that materials for learning are sub-par or nonexistent. The Linux community, as well as many other software communities, like to think of themselves as part of some elite club of experts they don't want others to join. To perpetuate this, there is a general lack of tutorials, GUIs, or helpful information of any kind. Take "man" for instance, the worst help facility ever created, which has never been improved upon.
This would all be okay if I could simply use the non-existent CVS installer to install and configure CVS. But no, I have to do it all manually, from setting up the CVS server in xinetd, to editing the cvswrappers file (why is this not set up from the get go?), to changing iptables to allow CVS connections through the firewall. Simply trying to figure out how to set an environment variable is an exercise in frustration the first time. It took me probably an hour of research just to figure out that I needed to edit the file "profile" in the "/etc" directory because such information is not nicely documented anywhere.
</rant>
Conclusion:
Ideally, I would like a SIMPLE version control system that I can just run on my Windows PC. Something with a GUI preferably, as managing large numbers of files from a command prompt is tedius. Likewise, a light-weight IDE, something less complicated than Eclipse, would also be of interest to me.
Also, if you have any recommendations for a good Linux book, that would also be of interest to me. Such a book would probably be tailored to a specific flavor of Linux since each flavor uses different tools. I currently use Fedora Core, so a Fedora Core book would be preferable. I think I am probably stuck using Linux for a server, as my copy of Windows NT Server is hopelessly outdated, and Windows Server upgrades cost thousands of dollars I don't have (why don't they have an educational version of Windows Server?). I still regret spending thousands of dollars the first time.
Thanks for any suggestions.Imho, CVS is a rather simple version control system, though I wouldn't want to access it using IDE plugins as they hide a lot of functionality. For an alternate frontend, have a look at WinCVS (www.wincvs.org) -- it's not that buggy.
You could also try subversion as a replacement for CVS, but afaik, there's no reliable and comfortable GUI client available yet. -
Re-allocating Actual Costs and Actual Work from one project to multiple projects
My company would like to track costs in one project and then re-allocate those costs to multiple projects. Example: An end user would submit a timesheet against a task named 'Analysis' for Project A. Once accepted and published, the
costs for those hours would be subtracted from Project A and 60% of those costs would be transferred to the 'Analysis' task for Project X and 40% of the costs for those hours would be transferred to Project Y.
We believe we can accomplish this through reporting, but before we go this route, we wanted to make sure there was not a logical, supported way in MS Project Server to complete these actions. Could a script be developed to accomplish this?
Thank you!
TashaOut of the box Project and Project Server do not support this. However with VBA anything is possible. You could also use PSI to work directly with project data in teh Server db but that would take much longer to develop. Check you can do what you want
in VBA then you can use the result to spec the server version afterwards.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz -
Cutting and pasting tables from one project to another
When cutting and pasting existing tables from one project to
another, the line weights for the cell borders seem to vary at
random - some are the original line weight and some are heavier
when pasted.
I've tried sorting things out with the table properties
dialogue, but to no effect.
Is there a quick fix, or am I better importing in whole
topics and then editing the imported topic?Hi Colum/Peter,
It's not a custom table, I just need to copy an existing
table from one project to another.
My blasted developers (may the fleas of a thousand camels,
etc), just decided to change the toolbars in one of our
applications. As this toolbar appears in slightly different guises
in about 6 tabs, I was trying to update the table that shows what
icon does what and cut and paste that table into all the sub
projects I have. Each table then only needs a minor edit for a few
icons specific to that sub-project.
Peter's on the right track. When I cut and pasted the table
it also pasted in a number of lines of HTML associated with the
styles in the other project. If I delete those lines, the table
then appears as it should.
Thanks for prompt response -
Version Control and Echo/2000
Do you have any documentation relating to the version control
provided by Echo/2000 and whether or not it is being incorporated
into designer6.5. If it is when is 6.5 due out?
nullDave Clarke (guest) wrote:
: Do you have any documentation relating to the version control
: provided by Echo/2000 and whether or not it is being
incorporated
: into designer6.5. If it is when is 6.5 due out?
Dave,
I will send you some Echo information. If you buy Headstart you
will get a free trail copy of Echo. Our aim is to finally have
all functionality of Echo into Designer. We have estimated that
60% of the functionality of Echo will be part of the first
release of Designer 6.5 in a later release all functionality will
be absorbed. Of course Designer 6.5 offers a lot more
functionality than Echo ever offered. The limited production
release of Oracle Designer 6.5 is expected in October.
Regards,
Ton
null -
Hi everybody,
I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
The setup is supposed to be like this:
LAN:
1 DC (2008 R2)
RD Farm (2012)
1 SA Server (2012)
DMZ:
RD Gateway/Web Access (2012)
Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
(without the OTP extension).
If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
contain the correct OTP extension.
The problem comes here.
When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: Unknown username or password.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: server
Source Network Address: 192.168.x.x
Source Port: 63003
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
The problem is that no matter what i try the above problem stays there.
Is it not possible to just forward ALL authentication handeling to a remote server?
The only solution I've found to get it working someday in the future is this:
"Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
Also this link describes it:
http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
Please, bring me some answers before my head explodes! :)
PS, long question = maybe some errors, ask me if something is unclear.Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Can I import both from NSTC and PAL cameras in one project?
Hi there.
I have a question.
I am going to start on a project, a music video, and import video footage recorded from a SONY HVR-Z7U in America, that is 29.97fps NSTC.
I'm also going to film in Europe, with a Canon HV30, that is PAL.
So I wonder if there will be any problems importing both HD NSTC and HD PAL footage to a project? Or how should I do.
I have already opened a 1080i30(60) HD project in CS4 and started playing with the NSTC footage. Is it correct?
Thank youWhy not shoot a trial clip in PAL and test it in your project?
-
Version control and Approval service for folder of File Server
Hi,
We have recently integrated Windows file server to portal using webDav connector. I am unable to use the services (approval and versioning) for this new repository. How to enable the services for this repository?
KM content stored in PCD is having approval and versioning services and we are using them.
Many thanks in advance.
Syam.THi Shyam,
U need to enable the services specific to the repository that u have created.
A restart may also be reqd.
u need to go to Content Management->Repository Manager->File System Repository
Add the services to the FS Repository u have created.
Regards
BP
Maybe you are looking for
-
HTML5 Zoom Are Shows Wrong Image
Hi All, I have a Captivate 6 Project that is being published ot HTML5. Some of the Zoom areas zoom into what that area looks like later. In other words, I wan to zoom into a menu, instead it sooms into an image that shows later in the slide. The s
-
I have the following problem: I use the CDE and the bash shell. If I start a bash terminal from the file manager file menu, the environment variables are not set correctly. The entries made in the file /etc/profile are just ignored. However, the foll
-
BAPI_ACTIVITYCRM_CHANGEMULTI not reflecting changes
HI All, I want to update the partner info for an activity. I am updating the Activity in CRM using BAPI_ACTIVITYCRM_CHANGEMULTI and have used BAPI_TRANSACTION_COMMIT after that. No error messages are returned, but the changes are not reflected. Am I
-
Regarding EDI: Syntax error in IDoc (segment cannot be identified)
Hi, My requirement is that I was adding two diffrent field values under two diffrent segments as "E1EDKA1" and "E1EDK02" in outbound invoice IDOCS, INVOIC02 (process code: SD09 - IDOC_OUTPUT_INVOIC). I am getting the IDOC number through Tcode "VF02".
-
Minor correction of project data has taken place (1)
Hey peeps, Last night i finished a track in Logic all mixed and everything done. I happened to close Logic after i had finished with everything. When i re opened the project i was working on a message came up saying "Minor correction of project data