Version D and Version A In Business Content

This was an Error I got ...
You wanted to generate an object with the name '0FI_AA_11 NW1CLNT000' (in transport request 0FI_AA_11 NW1CLNT000) of type 'Transfer Rules' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please Explain me what is Version D and A
How do i Proceed

Hi Santosh,
'D' means Delivered version from SAP.That means it will have all the properties carried out which are set in BI Content.
'A' Active version means if you use that object any where by installing from BI content.then it will be Active version.
Hope this helps
Regards
Karthik

Similar Messages

Use of Match(X)or Copy and Install checkboxes in Business content

Hi,
What is the use of checkbox selection under Match(X) and install in L.H.S of Business content while we try to install an object?
Thanks in advance

Hi,
Have you seen same question posted on today:
Installing Business Content - How to Deselect Match (X)/Copy Column ???
the help says that:
The active version is overwritten with the delivery version if
1) the match indicator is not set and
2) the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Install and simulation option in business content?

hi friends,
why do u we need install and simulation option in businees content?

Hi suneel,
The use of simulate installation option is the system runs a test to see whether any errors are likely to occur during the installation.
Simulation can't identify all the errors, because some error messages may be generated when a real A ( active ) version is available in the system. So you can use simulation function as a rough practice to help you in finding and removing some basic errors.
Hope this is fine.
Regards
Sreekanth

PlzzHow can we check the version of Business Content in ECC 5.0 version??

Hello Experts,
Plz tell me.. How could we check the version of the business content installed for ECC 5.0? I tried to search for the same in the forum but I couldnt.. plz let me know as I doubt that the business content is not properly installed for ECC 5.0 in my PC. and also I see only Technical content for Object Types under Business Content in AWB.
I always thank people awarding points!!

Hi Ajay, Thanks for the Info regarding PI...
I am using my ECC 5.0 as BW system as it got BW 3.5.. and I am really trying to see the Business Content Cubes like 0PUR_C01,0PUR_C04 etc... and in RSA1>Business Content> Object Types I could see only the Technical Content cubes..(not able to see the SD,MM..etc related cubes)...
And yeah I have R/3 PI installed with 2004_1_490 Version.. and so I could see all the Business Content DataSources in the source system...
Is there one more PI for BW?? or the same as above??
Plz through the light..!
Regards,
Sapster.

Business content option and update

hi
can anyone say teh use of match (x)& copy and simulation result in business content in AWB.
wht is v1 ,v2 and v3 update
thanks in advance

Hi Pradeep,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡ the match indicator is not set and
¡ the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
a. Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
b. Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
hope this helps.
Regards,
Sreedhar

Business Content for Industry Solution Aerospace and Defence (A & D)

Hi,
We would like to implement BI for one of the organization where ERP SAP R/3 IS Aerospace and Defence (A & D) is already implemented. I tried to see business content for A & D, but could not find. Could anybody advise me where anything is available for A & D?
Thanks and Best regards
Rajendra

All business content is available in the helpfile (help.sap.com). For your IS however, the link in the helpfile seems to be dead.
This either means there's an error in the online helpfile, or there's simple no business content available...
Try contacting SAP to verify?

Difference between installing and activating business content

Hi,
I am new to BW, would like to know some info
1) What is the difference between install busines content and activate business content, When i should do what
2) When a business content is installed do i need to go to modelling tab and activate it as well.
3) if a business content is installed would all other related objects get activated automaically like its update rules, transfer rules etc.
Thanks
Akila.R

Hi Ramachandran,
Good question,
This issue can be adressed with the "Match x or copy" option in the Business content activation screen.
Here with this option you can decide wether you need to overwrite the earlier content or not.
Follow the link for further explanation on "Match x or copy".
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Hope your doubt is clarified.
Regards
Message was edited by:
samara reddy

Error while Installing the update rules in business content

Hi All,
I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
please anybody can help me for solving this error.
i will asign points for your inputs.
regards,
kumar.
Edited by: kumar kumar on May 20, 2009 5:58 AM

Hi,
You can check the Content Release and Last Content Modification for your update Rules following thee given path:
RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
Change the Grouping as "Before and afterwards" and then try installing.
Hope it helps.

Project Systems Business Content - Residual Order Plan

Hi all,
I a issue which I hope someone can help me with:
I am lodading data into cube 0PS_C08 and then into 0PS_C04 as per the BC. When I view the BC restricted key figure "residual order plan" i get nothing (blank).
I look in R/3 I have values for residual order plan. I have looked at the Help on SAP and they say there is some config that needs to be done in SPRO. I dont really understand what config needs to be done can someone help?
Many thanks,
Leo

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

Project Systems - Business Content

Hi,
We are trying to install Project Systems Business Systems. We are in process of creating technical specs.
In the help.sap.com or best practices ,There is no detail explanation is available (Source field,source table or logic to get the field).
Some of the data sources don't have documentation.
I hope many of you implemented Project Systems.
Please share your experiences about finding Source fields and tables.
Please share the documents : [email protected]
Thank you,
GSP
Thank you,
GSR

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

Business content infosource

Hi All,
How do I do a comparison between the active infosource (2LIS_03_BF) vs. the business content infosource, or just to view the business content info source. I am interested in both the communication structure and the transfer rule. The current active infosource in the system was from release 2.x prior ro our system upgrade to release 3.5. I need to implement the new 0IC_C03 inventory cube. The old 2LIS_03_BF infosource was customized to load a different info cube.
Any help will be greatly appreciated. I will assign points for those who are spending their time to help!!
Thank you.
Andrew

Ravi,
I looked at help.sap.com and did not find the fields for the communication structure and transfer rule for info source 2LIS_03_BF. Can you point me to the right direction?
Also, I was hoping that there are some SAP utilities where it would show the differences between the active version vs. the business content version for the infosource. Such as the one available in the info object display.
Thanks,
Andrew

Hi........What is business content..

Hi all,
what is business content ? when this comes into picture in real time....
Thanks & Regards,
Bhaskar Rao Javvaji

Hi..
Business Content is a pre-configured set of role and task-relevant information models based on consistent metadata in the SAP Business Information Warehouse.
Business Content provides selected roles within a company with the information they need to carry out their tasks.
Business Content can
be used in particular industries without being modified
be modified, meaning you can work with it to any degree of detail
serve as a template or an example for customer-defined Business Content
This information model includes integral Roles, Workbooks, Queries, InfoSources, InfoCubes, ODS objects, key figures, characteristics, Update rules, and extractors for SAP R/3, mySAP.com Business Applications, and for other selection applications.
To summarize,
Business Content enables a quick and cost-effective implementation.
Provides a model that can be used as a guideline during implementation using experience gained from other implementations
SAP delivers Business Content in the SAP Delivery Version (D version).
Changes are saved in the M version.
Active Business Content is saved in the A version.
In the Administrator Workbench, one can collect and transfer the Business Content delivered by SAP. In this way, all additional necessary objects are taken into account automatically, as is the sequence for the activation.
SAP delivers the Business Content objects in a new D Version. The customer can compare the new Business Content with his/her active customer version, and either adopt the new version or merge it with his/her version.
Adopt: The customer version is deleted and replaced by the new Business Content version.
Merge: The total is made from both objects and saved as a new customer version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten.
If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if the match indicator is not set and the install indicator is set. In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.

Business content installed.

how can one find out if the business content installed is 3.5 or 7.0?

Hi,
Check the following from your SAP GUI.
System > Status >SAP system data >
Browse SAP system data there you can see the version of installed Business Content.
Regards.

How to find out the activation log for a info* from Business content

Hi,
I work in a BW 3.5 environment where a lot of projects are being done simultaneously and a lot of Business content are getting activated. BW often activates a lot of other objects when a certain section of seemingly unrelated Business contents are activated without much caution.
When I look into some of the objects related to my area of the Business content, I find them already activated.
How do I find the activation( who, what time etc ) log history of certain objects like info objects, cubes, ODS, Infosource etc..
This will help me immensely to communicate with various people( who inadvertently activeted them) and find issues quickly.
   Thanks
Arun

Hi,
The tables in which application logs are stored are:
BAL_AMODAL                     Application Log: INDX table for amodal com
BAL_INDX                       Application Log: INDX tables
BALC                           Application Log: Log or message context
BALDAT                         Application Log: Log data
BALHANDLE                      Application Log: Lock
object dummy table
BALHDR                         Application log: log header
BALHDRP                        Application log: log parameter
BALM                           Application log: log message
BALMP                          Application log: message parameter
BALOBJ                         Application log: objects
BALOBJT                        Application log: object texts
BALSUB                         Application log: sub-objects
BALSUBT                        Application log: Sub-object texts
Within Tcode SLG1 you can query systemwide object activation on various selection criteria.
Ofcourse furthermore for objects already once transported to PRD you can search transport requests or object lists via Tcode SE01.
Kind regards Patrick Rieken

How to find information from a field in R3 to get it in Business Content

Hi all, my case is this:
i want to learn how to get or struct a model in BW, for example, my task is make a query where the client wanna get information , and he told me the fields, ok, in R3 i got the name of the field (NODISCONCT), the struct (EANLD), and others fields more, ok, now i have to activate the data model to load this fields in InfoObjects, thats the problem, i dont know how make my model and find it in Business content, i was looking for in http://help.sap.com but i couldnt find it, but i want to learn more how to do it, and the best way to do this task, help me guys, i know this is a very important step that i must learn very well to make my carrer in BW, i ll really apreciate it !
Thanks !

Hi,
see suppose i can give you one example.
http://help.sap.com/saphelp_nw70/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
from this link you get idea about fi-ar and fi-ap
client will give you that these are the field i want . for this report. From report you can get idea
What is on it . Here you need to think you want to go top down or bottom up.
bottom up - you need to check with data source. then this datasource is related cube or dso and then report
just play with help.sap.com in bi content you will get idea

Version D and Version A In Business Content

Similar Messages

Maybe you are looking for