Version in LTP

Dear Expert,
While creating LTP scenario what is the exact use of version and version to be replaced.
Regards,
Sunil

Dear Mr.Sunil,
As per to my understanding Generally PIR's are given for an inactive version (other
than 00) in order to protect the regular requirement's.
Nothing but,generally trials are made using multiple verison with different
requirements.Once after running Long Term Planning under simulation mode we
get simulated planned orders.
Also MS64 is used to transfer the requirements from one version to another.
If useful reward points.
Regards
Mangal

Similar Messages

  • Solution about pp module

    1) what are the steps required for long term planning ?
    2) can we use interactive planning i.e, MD43 in long term planning?
    3) why conversion of material is not in possible in MS04?

    Hi,
    1. In long-term planning, you can create your own versions of the demand program, which are
    only used for simulative planning. This means you can calculate and compare the effects of
    various versions of the demand program in simulative mode in Material Requirements Planning
    (MRP) and in Capacity Planning. For each version of the demand program, the system calculates
    the capacity requirements, the activity category requirements of the cost centers and the
    purchased parts requirements.
    Long Term Planning Steps:
    1. Create Planned Independent Requirements Versions
    2. Copying PIR versions to LTP
    3. Creating and Releasing Planning Scenario
    You use the planning scenario to define the settings for long-term planning. The planning
    scenario controls how long-term planning is to be carried out.
    To compare different versions of planned independent requirements or plants, you can create
    various planning scenarios and then compare the planning results of these scenarios
    4. Executing MRP for LTP
    5. Evaluating LTP (MRP list and Stock/Requirements list)
    6. Copying  LTP results to Operative planning (You must firm the simulative planned orders you want to copy to operative planning)
    Procedure
    1. Starting from the MRP node, choose Planning  Single-Item, Interactive.
    The initial screen for single-item, interactive planning appears.
    2. Enter the plant and the material number, then check the control parameters.
    If purchase requisitions and delivery schedules (schedule lines) are to be created when
    copying the data, enter the appropriate indicator in the Create pur.req and Schedule lines
    fields.
    3. To start the planning run, choose .
    The Planning Result - Individual Lines screen appears.
    4. From the Planning Result screen, choose Edit   Copy simulative LT plnd ords to copy
    the planned orders.
    The system displays the dialog box entitled, Copy Firm Planned Orders From LTP.
    5. Enter the number of the planning scenario and choose .
    The system proposes a copying period.
    6. Check the proposed copying period and change it, if necessary.
    7. Choose .
    The system checks the date you entered.
    8. Choose Copy planned orders.
    The system copies the planned orders and they then appear in the planning results.
    9. Save your data.
    Result
    The system copies all firm planned orders in the selected period from long-term planning to
    operative planning.
    In MRP, the system deletes all the planned orders in the copying period.
    2.  You can use MD43 for LTP (refer above steps)
    3. In MS04 it displays stock/requitements list for LTP. You can not  convert materials here.
    Hope this gives you an idea  about LTP.
    Thanks,
    DV

  • LONG TERM PLANNING-pLANNING SCENARIO

    Hello friends,
                       I am using long term planning and creating a long term planning scenario.
    Where the version created of PIR is allocated to the planning scenario?how? give me the steps..
    regards,
    Ajay

    In MS32
    folow the menu path
    Edit --> Pl ind requirement
    in the pop up  screen, enter the varsion you have created for LTP, leave blank vsrion to be replaced... and click on confirm..
    it will asign the PIR version to LTP.

  • LTP consider production version and not consider selection id for routing

    Dear guru.
    I run mrp long term planning for a material.
    The material have a production version linked to a specific bom and routing.
    In trx OPU5 I have defined that the planning scenario consider a specific selection id for routing  , this routing is different from the  routing of production version.
    The result is that for this material ltp donu2019t consider any routing and no evaluation activity is possible.
    Do you know a solution in order that for LTP the system donu2019t consider production version and instead only consider OPU5 settings ?
    Thanks for your interesting.

    Dear CONS SAP,
    Create a new planning scenario in T Code MS31 and then maintain the scheduling parameters for this planning scenario and
    assign this selection Id and then execute and check.
    Check and revert
    Regards
    Mangalraj.S

  • LTP & Prod. Versions validity

    Hello,
    Just wanted to confirm if there is a way to ignore the validity period of production versions during the long term planning run. The validity of our production versions is quite short around 6 to 8 months though the BOM  & Recipes validity is long.
    We want to carry out the LTP run for around 18 months. Is there a way to ignore the validity of the production versions so that the LTP creates the proposal without any errors ( ie BOM not found messages - msg 52 ). any customizing or other entry to ignore the validity period of the production versions & just take the bom & recipe validity into account????
    Many thx.

    Dear Muhammad Sharf,
    1.You can not ignore the validity dates of the Production version either in MRP or LTP.
    2.This is not possible either by doing any settings in the background or in the front end.
    3.Just check out this,remove the BOM slection method value 2 in the material master and let it be
    blank,lock the production version and then run MS02 and check(I'm not sure whether this work).
    Check and revert back.
    Regards
    Mangalraj.S

  • Production Order in In-Active Version

    Hi All,
    Need your expert help...
    I have a production order for Assembly product (say A1). In this order, under component view, we have component (say C1).
    in MD04 for C1..,
    a) I see the dependent requirement
    I created a simulated version such that it considers the firm receipts from active version.
    Now, in MS04 for C1,
    a) I see the dependent requirement.
    My requirement is to remove the depenent reuirement in active version, but to retain the dependent requiremnt in in-active version.
    How to do that..?
    As of now, when i remove the component from Production order, its impacting both my active and in-active versions (ie., its kicking off component in both MD04 & MS04)
    Thanks,
    Krishna

    Hi,
    There could not be a simulative dependent requirement for a production order. What you can do is to create an independent requirement in the version which your LTP scenario supports, and simulate the dependent requirement in active version.

  • LTP in MULTIPLE BOM  scenario

    Hi friends,
    Please suggest for this following issue which is urgent one
    Client Have 2 plants:  2010-PRODUCTIONM PLANT ( MONTHLYROLLING PLAN)
                                        2020- WAREHOUSE PLANT (ANNUAL SALES PLANNING )
    Have 2  type of planning.
    1. Annual Sales planning      Infor structure S501 and Planning type Z501 are used.
    2. Monthly rolling planning.     Infor structure S502 and Planning type Z502 are used
    PROBLEM IN
    Annual sale planning- PLANT 2020
    Using T code MC94 and planning type Z502, the final sales plan is recorded for all material in the plant 2020 for the active version A00.
    After the data is saved it is transferred to the Demand management using PIR_SP_FM schedule batch job using the T codes MC8E for selection and MC8G for execution
    Once the data is transferred to demand management long term planning run is executed using MS01 T code for the planning scenario 001
    The problem we have is in this ‘001’ planning scenario. What we have setup at present is to select the existing BOM which is used in the normal MRP run. But the FMCG sector requires to different BOMs and different recipes.
    NB: client needs to run long term planning run for plant2020 with planning scenario  001 .
    while creating the PIRS  they want to go for alternative BOM and RECIPES(ROUTING ) so that they can plan according to the change in requirement.In current scenario they use single BOM and single recipe.
        Problem lies as 2020 plant is only warehouse plant . It does not have any BOM and Recipe in it. so how  planning run will be executed for annual sales plan with the explosion of BOM in this plant and the alternatives will be chosen In A multiple BOM and Recipe scenario WHICH NOW CLIENT WANTS TO SWITCH OVER.Client uses MS04 TCODE for the over view of stock in LTP where the change should reflect …
    THANKS AND REGARDS,
    omkar

    hi,
    Bom selection process in LTP works similar to operational planning, i.e it is based on lot size and date.
    Reward if useful.
    Amit

  • Transfer of Data from COPA to LTP

    Dear Experts,
    Is there a way to transfer the data directly from COPA to LTP?
    Please explain.
    Regards
    Tom

    Tom,
    You can copy data from COPA  using  Tcode : MC7P. But you still have to move it to SOP ( info structure S076 ).
    Next from SOP you can move plan to inactive demand (inactive version 002 ) ( using tcode MC8S) by creating suitable transfer profile.
    That demand can then be refrenced back to your LTP planning scenario ( using Tcode MS31 -create planing scenario or MS32- change planning scenario)
    Hope this helps in getting the necessary steps in order. else please come back
    Thanks,
    Ram

  • Inactive version of SOP

    Dear Experts,
    When i am trying to create plan, suspose system will prompt a small box and key in version number and description for inactive version. After that , only transfer to demand management as active version.
    But , now system does not prompt a box and straight away use A00 and it is an active version.
    Is there anyone face this problem and might to share what is the configuration i might miss out?
    Thank you.

    Hi Bodgan,
    Please refer the Step.For SOP through LTP
    For SOP
    1.Create Plan in flexible planning  MC93
    2.Sales plan verification transfer to active version MC8V
    3.Transfer sales plan to production plan MC8Q
    For LTP
    1.Create Inactive Demand Management MD61
    2.Copy SOP Production plan to Long term planning MS64
    3.LTP Planning Scenario  MS31
    4.LTP MRP MS01
    If still not clear i will send you the document regarding what you required.
    Thanks,
    Mohit

  • Available Capacity in LTP

    Hi,
    During creation of a planning scenario during LTP, we have a facility of assigning the Available capacity versions.  Imagine, that a few versions have been defined with '01' as the active version and some Simulative what if scenrio versions.  This active version has been maintained in the relevant WC/Resource. 
    Now during the creation, I would like to assing one of the what if scenario available capacity version. But I am really not sure how the system is supposed to behave since this version is not attached to any capacities in the work centres.
    Now in case i would need to analyse the what if scenario capacities, what is it that needs to be done.
    I have tried digging in some of the SAP material but came up with nothing.
    Any pointers on how to use the Available capacity versions  and what settings needs to be done will be much appreciated.
    Regards
    Kiki

    1. SAP has given this facitliy so that we can do a simulation based on different capacities.
    2. For this first you have to maintain different version of capcity in the workcentre level
    3. in the workcentre in the capacity tab you can see version , so can create different version of capacity here .
    4. Later when you create a planning scenario then you can plan with different version and do simulation.
    kindly let me know if this resolves,else will explain in detail.
    reg

  • Transfer of requirement from LTP to operative planning

    Hi,
    I have run LTP for different 5 finished products by MS01 by creating one planning scenario.
    After LTP run system has planned all the raw materials required for all five finished materials.
    Now I want to transfer the planned orders for all raw materials to operative planning MD04. But I dont want to transfer the planned orders for the finised materials to MD04.
    Through MD43 I can copy planned orders of raw materials to MD04 one by one (material wise).
    Is there any way that I can transfer planned orders of all the raw materials to MD04 at once.
    Please guide........
    Nitin

    Dear Nitin,
    I dont think a direct solution is possible ,either you can copy the values from one version to another using T
    code MS64.The source version will be the inactive version and the target version will be 00.
    One more T code MS66 for copying Simulative Dependent Requirements.
    Regards
    Mangalraj.S

  • Activites Transfer in LTP

    Dear Experts,
    We are doing Long Term Planning and after LTP run,  we are trying to transfer the Planned activities Requirements to Costing by transaction KSPP. After that we are missing  some Cost centers planned with the activities. Some are being planned. So where we are missing the data for all the Cost centers get transferred?
    We have checked the Requirements in MS04 and their versions, respective Routing and its Workcenter, in that  corresponding Cost center and Acitivity.
    Is there any check required further in PP or from Cost center side? Please through the Solutins.
    Thanks.
    Kiran

    This could be any of a number of problems. I suggest you try to eliminate certain options to try to narrow down the problem.
    I suspect there could be a'rogue' personalisation.
    Could there be a personalisation which is causing the problem? To check, go to Functional Administrator, find the page which errors and disable personalisations. If it's happenning on the seeded responsibility, then if a personalisation is causing the problem, it is most likely at site or function level. If you can't find the page this way, I think you can also achieve this (but it affects all personalisations) by a system profile.
    Does the problem occur on all employees you select? If not, it may be a data problem.
    Regards
    Tim

  • MPS and LTP planning

    Good day to you all,
    What is the MPS planning in R/3, can someone give me a brief couple of lines?
    I know it very well in APO but have had a look at the navigation of MPS in R/3.
    What does it do, what are the Pro's and Con's and could I use MPS with LTP?

    Guy!
    in MPS you will plan only the header items in and no further planning for the below levels. the idea is to create a firm plan for the header item first firm it so that no change for the firmed plan within the "Planning time fence". so you will have a definite plan for the period "PTF" so you can plan down the level using normal MRP and release the PO or schedule lines which leads to stable planning and smooth flow. if you are not fixing the plan for the higher level material then frequent change as per incoming salse orders will create unstable planning!
    So MPS is used for critical assemblies with Planning time fence and fixing types
    LTP is used for simulating the planning for various scenarioes with different planning versions and analysing the profitability, capacity requirement etc. and also after arriving the favourable version you can transfer to active version then you can go for either MRP or MPS.
    MPS is active planning whereas LTP planning is simulation.
    also in MPS you can use interactive planning and you can change the planning conditions and until it is saved it will be in system memory
    hope this helps
    Regards
    SK

  • Mass Transfer from SOP to LTP

    Dear Experts,
    Is there a way to mass transfer the data from SOP to LTP for all materials in a plant in one step?
    Please explain.
    Regards
    Tom

    Hi Tom,
    I guess that when you say transfer from SOP to LTP you mean that in SOP you create Planned independent requirements, that in the operative planning cycle you normally transfer to Demand Management.
    In the case when you want to transfer those PIRs to LTP, just transfer them to a non active version of Demand Management, and include that version in the definition of your LTP planning scenario.
    Regards,
    Mario

  • LTP Doubt

    Gurus
    I have one FG (X) with a RM (Y)
    Now in case of MS04 for that RM; i can see a SimReq for that FG
    MS04 for Y (RM) shows as below
    SimReq - X (FG)
    MD04 for Y (RM) shows as below
    SubReq - X (FG)
    My doubt is that why i am not able to see this SubReq in MS04???? I know LTP is for SimReq only but i should see SubReq as well b'cos it is appearing in MD04
    Please clear my doubt whether SubReq will appear in MS04 or not??? as this is resulting in wrong calculations
    Thanks
    Regards

    Hi Vicky
    Referring to your Scrap, I would like to confirm the below.
    For LTP you create a Planning Scenario where you assign a Version and Plant, you create a PIR for a material with the Version assigned to the Planning Scenario as INACTIVE, then you execute MS02 for that material and Planning Scenario and you get Simulated planned orders for the PIRs you created for that material.
    Based on the above process..
    When you check MS04 with Planning scenario and Plant you will see the simulated planned orders and the PIRs...
    When you check MD04 for the same material the PIRs that you created with an inactive version will not be displayed in the Stock requirements list(MD04)...
    LTP results will be displayed in MS04 as Simulated requirements only.... not dependent requirements.....
    Hope you are clear... if you have any queries please get back to me

Maybe you are looking for