[VERY LOW IMPORTANCE] Creation of a Service Po via BAPI_PO_CREATE1

Hi guys.
I need a complete or maybe a code solution to implement a Service PO creation using BAPI_PO_CREATE1. All the examples I see just only show at least 1 service item and trying to reply those examples was ùnsuccesful...
Pease can anyone provide me a code using BAPI_PO_CREATE1, for a list of N service items.
Thanks in advance.
RR:
Edited by: Julius Bussche on Feb 16, 2010 8:37 AM
Importance "corrected" ...

Hi guys...
Finally I found the solution, in a quite clear ABAP code.
As you mention Manesh, we have to increment by2 for each service Item in the package number. I mean: remember we have a service line in ME21N (showing this transaction code as an example) and for each service we can have N position items. In my case, only we need 1:1 relation (service and position).
Considering we need a package number per each service (f.e. 0000013291), a subpackage number per each position (this is the package number incremented by one -0000013292- if there is another position then the subpackage number is 0000013293 and so on). After we've completed all the positions for the previous service wa have to increment by (N + 1) where N is the number of positions taken by the previous service. So if the previous have 3 positions (0000013292, 0000013293 and 0000013294) then the new package number is 0000013295. Don't forget that if we have a service with N positions then we need to complete the POSERVICES table 2XN times (for the N positions and repeat N times the main service declaration for which correspond all these positions:
    services-pckg_no    = pckg_nro.
    services-line_no    = gvc_no.
    services-subpckg_no = pckg_nro + 1.
I hope you've understood clearly my explanation.
Well here is the code.

Similar Messages

After import from Iphoto some pictures are of very low quality. The original file in Iphoto is very good.

Final cut Express
I imported several pictures by using Iphoto. Some of them, not all, are of very low quality even if the original file is of a very good quality.

It sounds as though you may have imported the thumbnails but I can't imagine how.
It all depends on what you mean by very low quality.
Your iPhoto pictures will be around 4,000x3,000 pixels but when they are imported into a standard def timeline they will be around 720x540 which is a tremendous reduction.
They should still look OK but not as good as the brilliant hi-res originals.
Message was edited by: Ian R. Brown

Very low resolution previews using loupe in import dialog

Hi,
I had connected Canon 6D via usb to import photos to Lr. However in import dialog using loupe view I get very low resolution previews even if I zoom all way up. It doesn't make any changes in preview resolution, it's like 200x300 pixels at most. I shoot both raw and jpeg and it is the same. Tried full card format. Doesn't help. I can zoom normaly in camera screen. Is it related to the fact that I connected camera directly via usb instead of using card reader? I use latest Lr (5.6) and latest camera firmware (1.1.4).

A raw file usually has two previews embedded in it, a tiny thumbnail preview and a larger zoomable preview. It sounds like LR is only able to retrieve the tiny thumbnail preview even though you are able to zoom in on previews in the camera. Unless the camera, itself, is actually decoding the raw file to produce the zoomable preview and none is in the raw file for LR to see.
You can use the following website to investigate what previews are available in a raw file: http://regex.info/exif.cgi You want to click the Browse button next to Local Image File and navigate to a raw file and click Ok, then click the View Image From File button, then wait for the raw file to be uploaded, after which information about the raw file will be shown including the sizes of the previews and raw image.
As to your question about whether using a card reader might help, try it and see. There could be a system driver getting in the way when the camera, itself, is plugged in.

How come my macbook air has so little space. I deleted everything that I don't need and everything that has the most space I'm told NOT to delete. Everything I find is in either KB or very low MB.

How come my macbook air has so little space. I deleted everything that I don't need and everything that has the most space I'm told NOT to delete. Everything I find is in either KB or very low MB.

Check what is in your SSD/ storage on your macbook Apple Icon > about this mac > more info > STORAGE tab on top
recommend handy useful APPS such as :
Disk Expert
https://itunes.apple.com/us/app/disk-expert/id488920185?mt=12
Disk Map
https://itunes.apple.com/us/app/disk-map/id715464874?mt=12
dont need them, but theyre very useful.
also the best is DAISY DISK
https://itunes.apple.com/app/daisydisk/id411643860?mt=12&ign-mpt=uo%3D4
See here for answer about the OTHER which is taking up space:
http://pondini.org/TM/30.html
and here:
http://pondini.org/OSX/DiskSpace.html
See Kappys excellent note on the rest of “other” files taking up your space:
What is "Other" and What Can I Do About It?
see here:
Your Solid State Drive and having enough space inside your Macbook Air & Pro
Solid State Drive usage premise, or the “more space / upgrade SSD” question
There have been questions posed and positions taken by many people who are trying to use their Macbook Air or Pro’s solid state drive (SSD) as a mass media storage device, for either pictures, videos, massive music collections or all three combined; but this should not be the working premise of a ‘limited’ SSD and its use.
In which, it’s the case of those users with either 128GB, 256GB, or even 512GB of internal SSD space, that have or are running “out of space”, that questions are raised. The immediate premise of some users can sometimes be “(how to / if) upgrading my SSD” when in fact in nearly all instances another approach is the logical and sensible one that needs to be looked into and exercised.
Any Macbook containing a SSD should be idealized as a ‘working platform’ notebook containing all your applications, documents, and weekly or bi-weekly necessary files. All collections of media files such as pictures, music, and videos, unless directly needed should be kept off the notebook and on an external hard drive or likewise. While the ‘working platform’ premise is also the case with larger internal conventional hard drives of 1TB+, its implementation isn't as critical except in terms of data protection.
Realistically, you should at most coordinate roughly 20 to 25% of your total SSD space to all audio-video personal use media (picture / music / video collections), leaving the remaining amount on an external HD.
Nobody should consider any notebook a data storage device at any time under any circumstance, rather a data creation, sending, and manipulation device; and in the case of a SSD, this is more important for purposes of having sufficient working space on the SSD and reducing SSD ‘bloat’ in which cases someone is wrongly attempting to use the SSD space as a large media storage nexus.
The rare exception to the collective usage and premise of SSD use in which a much larger SSD is truly needed are for those in video and photography professions that require both the extremely fast speeds of the SSD and the onboard storage for large and or many video and photography files. However this also falls under the premise of a ‘working platform’ for such peoples rather than the intent of many who are using the SSD as passive and static data storage for media files very infrequently needed or accessed.
All on-notebook data collections should be logically approached as to necessity, and evaluated as to whether it is active or passive data that likely doesn’t need to be on the notebook, allocations of space-percentages to as-needed work and use, apportioning space for your entertainment media, and questioning whether it should it be on the notebook for more than short-term consumption.
Considerations should be made in the mind of any user in differentiating the necessary system data (System hub) comprising the Mac OSX, applications, necessary documents that both must and should be on your internal SSD, and that of the users personal data (Data hub) comprising created files, pictures, music, videos, PDF files, data created or being created and otherwise, that likely unless being used soon or often should be parked on an external hard drive for consumption, or temporarily loading onto the internal SSD.
You both can and should purchase whichever SSD size you need or see fit, but even in the case of the largest of SSD, unless use-considerations are made, and SSD spaces are allocated as should be the case indicated above, one can easily and immediately run into this quandary of “needing more internal SSD space”, in which instance a different approach in usage must then be implemented.
However it is almost always the case, that such large media files are wanted to be stored internally rather than actually needed, in which case the external HD is both prudent as well as necessary. Additionally costs per MB are infinitely less on an external HD than an internal SSD in any consideration of data expansion needs.
A Professional Example
In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace.
You should also never be put in the position of considering “deleting things” on your Macbook SSD in order to ‘make space’. This is especially what your external HD is for.
Professionals who create and import very large amounts of data have almost no change in the available space on their notebooks internal SSD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your Macbook has a SSD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your notebook to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.
Slim USB3 1TB external hard drive
External Hard Drives
External hard drives are both extremely cheap and regardless of the size of your internal SSD (or even internal hard drive if the case), you need an external hard drive with your SSD equipped Macbook for several reasons:
1. Data backup and protection.
2. Redundancy for important data.
3. Necessitated ideal space for large media files for collections of pictures, videos, and music etc.
While ever changing in price, typical portable 2.5” external hard drives in USB3 run roughly $65 for 1TB or $120 for 2TB small portable USB3 hard drives. Such drives range in thickness between 5mm and 15mm, with recent improvements in storage of 500GB drives in 5mm profiles.
There is almost no premise in which a small 12mm thick 1 Terabyte USB hard drive cannot be taken along with any Macbook as an external large storage extension inside any Macbook carry case or pouch. Typically such external HD profiles are not much bigger than a deck of cards.
External hard drives are a foregone necessity for purchase with any Macbook for at the very least Time Machine backups, data redundancies, and ideally for large media storage.

How do I fix my ipod classic that says very low batter after I have charged it and the problem persists?

I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!

Have you read this post written by another forum member?
The Sad iPod icon.
However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.
You can make an appointment by using this link.
Genius Bar Appointments.

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

Moving object between tabs results in very low resolution?

Hello,
I'm using Illustrator CS5
When I move an object to a new tab(drag and drop), the end reult is very low resolution/distorted image?
Regards

You are welcome, 1-2-3.
That alignment is the default for kinds of documents normally used for web and devices where it may be an advantage to work in whole pixels only. It is possible to change the setting for such documents.
What happens is that (part of) the artwork is moved to be contained within whole pixels, by the least possible amount. This also happens during creation so that the Anchor Points/whatever that you place are adapted, unless you place them at whole pixel positions, in other words small, maybe unnoticeable, corrections of what you do.
When you drag and drop, you basically just throw it into a new, normally off grid, position, and the parts of the artwork may be moved differently.
You may keep the undistorted shape even with Align to Pixel Grid ticked if you copy from the source document and then use Paste in Front/Place/Back in the receiving document. You can also move it by whole pixels in either/both directions.
In any case, you may ask yourself whether you want (the individual parts of) the artwork to be contained within whole pixels, or more freely created. In the latter case, you should have Align to Pixel Grid unticked before you even start.

Gen5, 80Gb iPod battery will not charge. States: please wait. Battery very low. ANY help?

5gen video iPod will not charge. Only states in LCD window: please wait. Very Low Battery. Can anyone help?

That's usually a good indication that your iPod battery's is shot and in need of a replacement. If you'd like, Apple can swap out the battery for a flat fee.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Otherwise, you can also send it to a third party repair service center that could do the same job for a little less. Google "ipod battery replacement" for different options.
B-rock

Help - Screen brightness is very low

Hello all,
I am having problems with my touchsmart. The screen brightness is very low and I can't see anything unless I have a flashlight. The brightness is already at 100%. A couple of things I noticed. When my computer is in sleep mode and I move my mouse to get out of it, the screen will appear normally for a few seconds. When I changed the screen resolution to 800x600 and click apply, the screen brightness will go back to normal for a few seconds and when I revert it back to 1600x900, it will go to normal again for a few seconds. Here are my specs:
HP Touchsmart 300-1025
Processor: AMD Athlon II X2 240e Processor 2.80 GHz
System: Windows 7 64-bit
THanks for any help.
Tim

Hello tim1218:
Lets get you started with calibrating your display. Go to Help and Support click on it. Opens type in brightness will take you to: Adjust your monitors brightness and justment. In secound sentance at the end of it click after word (see) Click on Calibrate you display Next window will give direction follow them. If you are unable to get it resolved by running calibrations . Then I recommend that you take your computer in for service. I wrote this bold and large type for you to be able to read it on dark screen.

Rendered video very low quality

My camera shoots in MTS format. I converted the file to mp4 and edited it. I then imported that footage into After Effects and when I tried to render the video it was very low quality. I made sure the composition settings and render settings matched that of my video. I tried saving it as H.264, mov, avi, m4v, and mpeg2 non of which were good enough quality to use. The avi format came close in quality for the video but everything seemed to move in slow motion. The audio played perfectly though. I also tried rendering video directly from the MTS file and it still didn't work.
Is there a specific way I should convert or encode the file? I tried some different settings within Adobe Media Encoder but when I brought the file into AE and tried to render I got the same issues of it being low quality.
This is for a client so it's very important that I get the needed effects added to this video. Thanks in advance for any help!

I understand how After Effects rendering works and different file types. I just wanted to try rendering in different formats just make sure I hadn't missed something. I figured something out that came close to the quality I need so I guess it will have to work.
My original MTS file is 1920 x 1080 and 29 fps.
I rendered it with these settings originally
NTSC, 1920 x 1080
29.9 fps
Bitrate CBR 30 Mbps
The file came out choppy and noticeably lower quality.
The last time I rendered it with these settings:
NTSC, 1280 x 720,
59.94 fps
Bitrate CBR 20 MBps
The quality was much much better. It still had a little distortion with a lot of movement but it was much more bearable so I guess that's what I'm going with. If anyone knows of any better settings it would be greatly appreciated! Thanks.

My retina macbook pro's audio has a very low voice.

I just have my retina macbook pro yesterday. I played a movie with Mplayer and some video on Youtube, but the output audio was very low. I compared with my macbook air(2011), with the same video and movie, use the same audio level, it is obviously the retina's sound is smaller than air. Is my audio system in retina have some problem? or it is normal?

So not sure how the 2014 MBP's trackpad works but on the ones I've seen the trackpad has to be exactly centered in the trackpad opening. When you service them you place shims around the outer edged before you tighten them in place. Meaning the springs that hold it in place.
If it wasn't centered correctly I could see how it would creak.
https://www.ifixit.com/Device/MacBook_Pro
This is for the 13" late 2013. It's glued in place here so I could see how it would creak if it wasn't properly installer.
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Late+2013+Upper+ Case+Replacement/27438
Step 34.
Make them fix it!

ADAT into Logic Express, VERY low signals recorded

I tried Garageband, same problem, so now I am trying Logic Express.
When transferring tracks from an ADAT, through Alesis io/14, into Logic, the resulting sound files captured are VERY low signal. This should be a digitally ACCURATE TRANSFER. The Alesis montoring software on the mac senses the correct signal, the signal meters show correct levels (and sounds great), but Logic hears and records very low signals.
I note the Sound midi pref window only shows 6 channel 32 bit. It won't allow me to change to 8 channel 16 bit. Possible problem or am I chasing ghosts? I exhausted all my ideas.
Any thoughts?
T

Ropher wrote:
Discovering I was unable to import a ".au" file into Logic Express (or Garage Band) I read it into Sound Studio and exported it in a variety of formats. I can now successfully drag to Garage Band files in formats .aif .aifc .sd2 and .wav and get the expected result.
Unfortunately however, I only get the expected result importing these into Logic Express for the .aifc format which plays back at the expected speed with a low-pitched sound (but which doesn't display an uncompressed waveform). Importing the .aif .sd2 or .wav format files however results in the imported file being squeezed into a very short duration with a correspondingly undesirable very high pitch.
Is there some setting or magic incantation I need for reading in audio files to Logic Express without it getting squeezed?
Thanks!
--Roph
Yes. you need to ascend to level 5 before we give that secret incantation.
Really, you need to use a third party converter software, if you are going to use .au files.
Logic is happiest with .aiff, .wav files, but not much else.
Cheers

Very low audio on my new Satellite L755-M1KS

Hi,
First of all, I couldn't find my model here on this website or on any of Toshiba's websites for that matter which is very weird.
My problem is, the Audio is very very low since day one when I bought it.
The laptop is still under warranty and I don't know if it is a software problem or a hardware one.
I'm located in Abu Dhabi, I don't know where is the toshiba support center here and I don't know why this particular model can't be found anywhere!!
Please help!
Thank You
Toshiba Satelite L755 - M1KS

Unfortunately I cannot find your notebook on Toshiba page too.
Anyway, if you are using original Toshiba recovery image (original preinstalled OS) and you are not happy with it contact nearest authorized Toshiba service provider and ask for help.
You can find ASP on http://gulf.computers.toshiba-europe.com/innovation/en/generic/ASP_SUPPORT/
Check it out.

QT 7 Pro - Volume of audio is very low when I record from a microphone.

Possibly someone can help me here, I am trying to record audio using a microphone and QuickTime Pro. I want to put this audio on my Nano.
I cannot get the audio volume up to the level of existing imported audio programs when I record a audio program using QTP and a mic.
I have already tried to set the microphone volume to a higher level. In the Quicktime Program I set the Menu/Edit/Preferences/Quicktime Preferences
I then go to the Audio tab, select audio recording and playback devices, select "audio playback and recording devices" and set the volume slider on the microphone to high, go to the advanced tab, set the microphone to boost, still I get a very low volume.
When I record using the Windows Sound Recorder I get a high volume, but the output is a wave file and the quality is not as good as I really want. But clearly the microphone and driver work. I have tried updating the driver, still get low volume for my recorded audio.
HP DV1000 Pavilion Laptop Windows XP Conexant AMC Audio Driver

So you use an RCA cable going into what before it hits the MBP?
EDIT: Also in System Preferences > Sound > Input > you can select the input & adjust the volume accordingly as long as it's plugged in.

[VERY LOW IMPORTANCE] Creation of a Service Po via BAPI_PO_CREATE1

Similar Messages

Maybe you are looking for