Very LOW so

Installed the Audigy sound blaster SE. Installed drivers , Updated drivers. Sound in the right speaker of my headset sounds great. Sound in my left speaker is VERY low but all my equalizer settings are set to mid so that it should all be evened out. Would changeing PCI slots fix this? Ive noticed a couple of other posts about this but no actaul fix. Anyone have any idea?

Tryed changeing slots had same problem..

Similar Messages

Ios 7.1 = no Wifi on iPhone 4s very low battery runtime... HELP!!!

ios 7.1 = no Wifi on iPhone 4s + very low battery runtime... HELP!!!

Welcome, sorry to hear your news, there are numerous threads on this issue. Try the trouble shooting on the other threads, I do not recommend sticking it in the freezer or heating with a hair dryer though,
If it's within warranty and trouble shooting doesn't work, get it. Ack to apple ASAP and get it replaced.
Many others are in the same position, who also have a 4s
Good luck

How do I fix my ipod classic that says very low batter after I have charged it and the problem persists?

I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!

Have you read this post written by another forum member?
The Sad iPod icon.
However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.
You can make an appointment by using this link.
Genius Bar Appointments.

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

DVR replay on the non-DVR STB - very low quality

I started recording a football game on the DVR, and about 45 minutes later I began to watch it on the non-DVR setbox in another room. The quality is very low: every 10 seconds (almost exactly) the picture gets very choppy, stops and starts.
On the DVR itself, the replay is good.
Is this a known problem with the STB?

Have you attempted re-booting both STBs?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

Volume on iphone is very low, this is a common problem, Apple Needs to FIX!

I have a new iphone 3GS that I got at the end of July, 2009. Since then i've been having problems with the volume! I called support because i had this problem along with my screen turning blank and freezing up. Support said to take the case off and this might help. well it did help the screen issue (which is kind of dumb when you think about it because the case is supposed to protect the phone and instead it caused it to malfunction!!,wierd), but the volume issue never really changed. I am hearing impaired and I do wear hearing aids, BUT....I have ALWAYS been able to use cell phones that have good loud volume, as i need to remove my aids to use the phone. My LG phone had BEAUTIFUL volume, never had a problem!
So, then I started to do some research and saw this is a very common problem! everyone I know that has an iphone has this problem, and all these people are normal hearing people! So then i decided to just get some really good, superduper headphones, because the headphones that came with the phone were ok, but i had to hold them in my ears.
The other day i bought the new Bose in-ear headphones with superior sound quality and at $130 bucks, they better be and the are compatable with the iphone. But.....again, while actually talking to someone on the phone the sound, even with the headphones and all volumes max'd, was still very low!! and i know its not the headphones because listening to the ipod is fantastic! it must be the phone!!!
I even used the "accessibility" setting that is on the phone and selected the mono audio feature which pushes both L&R sounds through one channel, and still doesnt help!
I even called support back today and one guy said i had to "restore" my phone by plugging it into my computer (not really sure what he means) but we got disconnected and the other guy said that i should bring my phone into the apple store. Both tech guys denied that there are lots of calls or complaints about this....but as you all know from reading the many posts, that this is a very common problem!!!
I think Apple should do the right thing and recall these phones or at least fix them or SOMETHING!!!! this volume issue is internally, because when i make a call and an automated voice comes on, it works fine (majority of the time) but as soon as a live voice comes on the phone, the volume drops! there must be some type of automatic voice adjuster that is just not working properly. I mean i love my phone!!! But....i cant use it!!! And now, im going to have to return my Bose headphones and try to find something else.
Can anyone really help me?????

stewa348 wrote:
I agree with you about the volume on the phone itself. (I have 3Gs). It needs to be louder. I also wear hearing aids. However I do think there may be something wrong with your phone because when I connect my earbuds (Klipsh) I get very good volume through them. In fact at full volume it's way too loud. I would push for a replacement phone.
FWIW, my daughter (who also wears hearing aids) has trouble hearing her iphone. It appears to have more to do with the speaker not being lined up with the hearing aid's input. Her audiologist pointed out that some current hearing aids support bluetooth, I think we will get those next time we replace her hearing aids.

''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)?

''Well When i plug in my ipod touch the battery life is low..i let it sit a wyhle.And it starts up to the apple logo and it stay there some time then it restartsback over to the very low battery and repeat(Over&Over)

Can you reset the device by holding the sleep and home button until the Apple logo comes back again?
If this does not work, try to connect in recovery mode, explained here: iOS: Unable to restore

Laser Jet 100 Color MFP M175nw "Very low" message even after changing cartridge

Hello, Windows 7, 64 bit. Connection: USB. After a "supply very low" message for the black cartridge, I changed it to a completely new one (HP original toner with the hologram), but I still got a "very low" message and the print quality remained faint. Nothing worked: I tried the 3 solutions posted by Shirlzz1 to another user that had exactly the same problem (Alan_Gilmore), i.e. 1) taking out and reseating cartridges, 2) hard reset, and 3) taking cartridges out and hard reset, then reseating cartridges. I also tried a cleaning and a print quality report. All looked fine, but still "very low" message and faint print quality. The only thing that worked was changing the cartridge a second time to a completely different (new) one -- now everything's fine. So I'm guessing the first replacement cartridge I used is defective. However, is there anything else I can try with the apparently defective cartridge? They do cost a pretty penny, especially here in Denmark. Thanks for taking the time to look at this.

Hi,
Please check for these settings
setup menu> system setup>supply settings
Under this you have a option
Black Cartridge
very low settings>stop/Prompt/Continue, select continue
low threshold> on/off
same for color too
Hope this helps
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Could Very Low Disk Space Cause problems?

Hi, my 600 GB Hard Drive only had around 5 GB of space left . I purchased a new 1 TB Hard Drive in order to delete media so that I could gain the space back. I've since gained back 200 GB of Space but Could very low disk space cause issues? What kind of issues could occur? Thanks
Message was edited by: Stuart Lawrence

There are any number of reasons for occasional beachballs to appear. They will appear when some programs are involved in heavy disk I/O which tends to be processor dependent and causes the program to suspend all other activity until the disk activity has completed. This is more often the case when writing to the disk. Beachballs may also appear if the OS has to use disk I/O and is slowed down by an over-filled and/or fragmented hard drive. The fuller a drive gets the greater the likelihood that fragmentation will become a more noticeable problem. Beachballs can appear if you are low on physical memory so applications must resort to disk-based virtual memory which is considerably slower and tends to cause the computer to become slow or unresponsive for a period of time. It can also cause disk-thrashing. Beachballs can occur if the disk has become corrupted causing applications to have difficulty reading from or writing to the disk.
It is possible to repair a drive's directory, and it's even possible to identify corrupted files, but it's not possible to repair corrupted files nor repair a corrupted drive. If a drive develops corrupted files either the files will need to be replaced or deleted. If a drive develops soft sector errors these can be repaired by erasing the drive (reformatting.) If a drive develops hard sector errors these may or may not be repairable, but if they are repairable it requires zeroing the data during a disk formatting operation. If the disk directory becomes corrupted that can be repaired using Disk Utility or one of the various third-party utilities such as Disk Warrior. Disk Utility can repair many but not all directory corruption problems. What DU cannot fix Disk Warrior usually can.
You can start repairing a drive as follows;
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
This applies to your startup volume. No need to repair permissions on any but a startup volume.

AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB

AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB. IWANT DEGRADE IT TO IOS 7.1.2

You must have upgraded the device directly through WIFi, restore your device via ITUNES and thats gonna work, it will reduce the space occupied by the new software installation

My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low.

My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????

If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Video files show very low resolution poster image

Using Indesign CC and the latest tools and content viewer I am creating Autoplay video animations for the cover of our weekly magazine.
With each issue I have published the same problem occurs where the poster image for the video file is very low resolution and makes our content look very amateur (for a brief moment) before playing the video file at full resolution.
I have tried creating animations using flash, photoshop and Edge Animate, exporting MP4, MOV and OAM files. The problem is present with all movie files and with the Edge animation files a white flash appears before the file plays.
Is there a solution for either of these issues? We are looking to continue to use animations for our covers and need them to look 100% crisp and clean.

Sorry to jump in but I'm having the same issue too!
I have an H.264 mp4 which I created in After Effects and inserted using the Media panel within DPS.
As you see below, it plays on page load and I have chosen the finished front cover to be the poster image when it ends from within the Folio Overlays panel. I have set the video to stop on the last page.
When the video stops you can see all the artifacting around the text which I would expect to be as crisp as the original PSD file I uploaded as the poster image.
Is there anything I'm doing wrong or is there anything that can improve the quality of the final still?

My pc sound level is very low on playback from dvd and most websites even though its at 100 percent

the playback level on dvd and most video streams is very low.(youtube seems ok)This is my second pavillion g7 w/ windows 7 .The first had a defective fan but the sound level was ok and there was a graphic eq section for sound control with other output options.I've yet to find that area on this pc in the month I,ve had it even though their identical computers.I,m at a loss for the cause of the problem.Headphones work fine but are annoying.

i use professional studio monitors to monitor the audio
the issue , is if i turn up the audio it will clip on premieres main output. so i cant turn it up any more.
the specific moment i took the screenshot the audio volume was at -18db, but even if it was up at 0db it would not even reach half volume on my computers main output
this is the case regardless of the nature of the audio, be it stock music, dialogue, or sound effects maybe there is a hidden master output that im unaware of

Very LOW so

Similar Messages

Maybe you are looking for