Very Strange Issues - Can't boot

I've tried everything. iMac G5 (no iSight) won't boot.
Reset PMU
Reset SMU
Removed and tested all RAM in similar iMac (all chips fine)
Left just one 512 MB RAM in broken iMac
Zapped PRAM
Booted Open-Firmware
reset-nvram
reset-all
I have an external firewire drive with Leopard, Tiger bootable partitions
iMac can't even see this drive on startup
iMac won't boot from original Tiger DVD
Normal boot sequence yields a flashing ? and Mac symbol as if it can't find the internal HD
When I hold C on boot, the iMac looks as if it will startup, it shows a gray screen with the APple centered. But then the fans kick on and nothign happens. This is the closest I can get to a successful boot. Nothing I know seems to work.
Any ideas?

Sounds as if the drive is giving up the ghost, you seem to have covered all other possibilities. It could also be the logic board. I suggest you try booting from one of your externals, if that doesn't work, try using Target Disk Mode and use Disk Utility to repair the drive, if possible. Have you checked for swollen capacitors on the logic board?
Let us know how thing turn out,

Similar Messages

Files transferred to external HD end up in trash - very strange issue

Hi,
I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
Has anyone experienced this or have any suggestions?

Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?

A very very strange issue on BlazeDS Deserializing

Hi all,
I run into a very very strange issue on BlazeDS Deserializing. Is there any hint or idea? Thanks a lot!
Scenario 1:
Both the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine.
Actual result:
Everything works fine. All the properties in the Flex Object could be mapped to the Java Class
Scenario 2:
The browser(firefox or IE) and the midtier (BlazeDS ,java) are on the different machine.
Actual result:
Sometimes it works fine.
And most of the time it does not work fine. Only the data in List is mapped correctly. All the values of simple data type such as int are mapped to 0 .
Let me simplify the problem.
The objects of Class B is always stored in the ArrayCollection assocItems of Class A
Flex side:
public class A {
public var id: int;
public var name: String;
public var assocItems: ArrayCollection=new ArrayCollection();
public class B {
public var id: int;
public var assocItems : ArrayCollection=new ArrayCollection();
The id , name in Flex Class A and assocItems in Class B could be deserialize to correct value . But the id of Class B is always mapped to 0. This is not correct.
The log level of BlazeDS is configured to Debug. From the log I can see that each value is passed from Flex side to Java server side correctly.
[BlazeDS][INFO] Channel endpoint my-amf received request.
[BlazeDS][DEBUG] Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/18)
(Array #0)
[0] = (Typed Object #0 'flex.messaging.messages.RemotingMessage')
However, the Java object does not get the correct value of B.id.
In conclusion,
1. It’s an issue with only default types
2. It does not occur every time
3. It does not occur when the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine
Have you ever run into the similar problems? And what’s your solution?

I checked, when I hard-code the constant in linq, the generated sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ('1062303212007000121' = "Extent1"."AA")
if I pass a variable to the query with same value, the sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ("Extent1"."AA" = '1062303212007000121' /* @p__linq__0 */) (@p__linq__0 is passed as parameter)
The only difference is a paramter. I can't figure out why there is such a impact on performance.

Can't delete folder (or files in it) - VERY strange issue

ok i know there's been tons of questions about how to delete/force delete a troublesome file or folder. believe me, i searched, i've tried them all, and still, i couldn't solve it.
here's my problem:
a) 4 files, in a folder called "as".
- 06Jacksons Club "Sunspot".mp3
- 11_Novelette Conclusion" excerpt_Lisa edit.mp3
- 16_Green Tea At Denny_s _Mary P. _Aka High Places Singer, Bassoonist, Zine-Maker, BOO - The "P" Is For Pearson_].mp3
- 20_"Arrival In Benaras__ From Merchant-Ivory_s Film __The Guru__.mp3
b) things i tried so far, and what happened:
- using the terminal with sudo/rm. answers for a file: "No such file or directory".
- using the terminal with rm/sudo to delete the whole folder:
rm: /Volumes/Untitled/as/: is a directory ... is the answer i get, and it stays there, doesnt move
c) if i move it into trash, when i try emptying it, everything goes except for that folder and it's files inside, neither does force deleting it via the terminal make it disappear. the "crushing" noise is audible, but nothing happens. no errors or anything, it just stays there.
d) if i click on one of the files, they disappear (!!!). if i play around in finder and come back to that folder later, they're there again. the folder itself can be normally copied, renamed, moved around on the harddisk and everything. if i duplicate the folder, the dublicate is empty, unlike the original folder.
e) NO music player or anything else ever used those files.
f) they are 0 bytes each.
g) another note: the files and the folder are on an ext. harddrive. the harddrive is not faulty.
h) i even tried deleting them from a windows computer, which keeps saying the filenames are too long or invalid, and it wont work either.
i) the folder or the files are not locked, i have full read/write permission, i tried reinstalling several times, i also tried it from safe mode.
j) formatting the harddisk is NOT an option.
i would be very helpful if anyone could help me with this very annoying issue. i just want to see my trashcan empty for once.
thanks very very much!

Try booting to Safe Mode (hold down the shift key while booting, restart may take a long time but let it go), sometimes just doing that works. Restart normally.
Reading
[You can't empty the Trash or move a file to the Trash in Mac OS X|http://docs.info.apple.com/article.html?artnum=106272]
[Solving Trash Problems|http://www.thexlab.com/faqs/trash.html]
[How To Fix Stubborn Trash and Why it Won't Delete|http://www.osxfaq.com/Tutorials/LearningCenter/HowTo/Trash/index.ws]
*Utilities for emptying trash*
[Trash It! v3.6.1|http://www.nonamescriptware.com/?page_id=5]
[DropNuke|http://www.versiontracker.com/dyn/moreinfo/macosx/12664]
[Super Empty Trash 2.3|http://www.macupdate.com/info.php/id/16727] - Simple AppleScript applet that will empty the Trash with administrator privileges
[What's Keeping Me|http://www.hamsoftengineering.com/products/wkm/wkm.html] - lists files open and applications that are using them

Premiere Pro CS5.5 -very strange issue with the color tones and Preview-

I deal with a very strange and not usual problem in Premiere Pro CS5.5 (also the version CS5). What I try to do is just a simple color correction. The problem occurs when I try to use Three Way Color Corrector but it happens with Fast Color Corrector also.
When applying the Three-Way Color Correction and without changing anything else (just applying), can be seen in the preview of the soft how sudden changes in color tones. For example, the gray tone becomes a little more green, but also can be seen very easy a change in the other color tones too. In fact even RGB Parade show the same thing. This is very, very strange and unacceptable and saw that it happens when trying to use Colorista II too.
I tried the same thing in Sony Vegas Pro 11 and I downloaded the trial version of Edius 6 to convince me if the same thing happens. Not! In Sony Vegas and Edius everything is working correctly, I have not experienced these problems in the preview's of this 2 others softs.
This issue is very annoying because every possible color correction is based on what we see in the preview and if in this preview the tones are seen altered realize that can not make a decent color correction. So what happens here?!? I uploaded a small video demonstration to see very clearly about what I'm talking. You can see in the next link: http://vimeo.com/35317616

Yes Jim, you're right. No changes in the scopes when one just apply RGB Curves, Fast Color Corrector, RGB Color Corrector or the Three way Color Corrector (last three thanks to the new update 6.03). I already wrote that Adobe team has been able to fix this bug for some of the tools/effects.
But Brightness&Contrast? Change Color? Color Balance? Levels? MBLooks? Twixtor? Colorista II? Does it seem normally that all scopes or just one of them jump when you just apply one of these effects/tools? Not to say that in some situations even the tones change (especially in shadows&midtones).
You say this is something "very minimal". I say it is not so. I don't find normally to make a very detalied CC with Three way Color Corrector and then when applying Colorista/MBLooks, for example, the scopes jump and inclusively some tones may be influenced. And I left clear examples in this topic where you can see that this is possible. I don't know if this is "very minimal" or not, but is really so impossible to edit in Premiere without this "very minimal" issue?!? How can it be possible in other softs (Edius, Media Composer, Vegas Pro) and in Premiere not?!?
One more thing: many of us use intermediate codecs in the editing process. Do you find normally that a AVCHD video have the lumninance at approximately 110IRE, to export it directly to Cineform and then import it in Premiere, and the waveform shows the luminance at 100IRE?!? How is this possible?!? So the AVCHD video have a 110IRE luminance, you convert this video to Cineform without changing anything, and then this Cineform video have the luminance at 100IRE?!? And anyone can verify this example.
So, how can one trust in this soft?!?

Strange issue - Can't play songs in iTunes 7.5.0.20

I have a strange issue with iTunes 7.5.0.20 on my Windows Vista PC. I can preview songs in the iTunes store, or play songs from my library; however, after a few minutes both functions will stop working. The status bar, showing the song playing, does not move and there is no sound. I can log off, or reboot, and the function comes back for a few minutes and then it is broken again. This is very frustrating. I don't have this issue with other music software on the same PC. I have already done the remove iTunes & reinstall bit. Any other ideas or suggestions would be greatly appreciated.

well, after a permission repair and reboot i can delete songs from playlists, but not the library. and syncing an ipod locks the entire system not just iTunes, and iTunes will not be killed.
did 7.5 get tested at all?

Very strange Popup - can't get rid of it

I've been getting a very strange popup lately when I go to certain sites and I can't get rid of it. It's an advertising thing that thinks for some reason that I live in Oakland (which i don't but is nearby). I also noticed that on certain websites now autofill puts in Oakland and some sites say i am logging in from Oakland.
The popup looks like an XP window but is messed up and the text hangs over the edge of the box. It bounces around in the middle of my screen and makes accessing anything under it impossible.
I have cleared cookies, cache and history. I have pop block on. This happens in Safari and in Firefox. I can send a screen shot but can't seem to paste one here.
If I have accidentally gotten some adware installed, how can I find and get rid of it???
Any help would be hugely appreciated!
Thanks,
Ed

Thanks for the quick response. I pretty much always get it at this site:
http://www.alluc.org/alluc/tv-shows.html?action=getviewcategory&category_uid=822
A friend just tried the site too and said he gets the same popup but with an advert for Seattle (where he does live), so perhaps this isn't something installed on my computer after all... it is super annoying, though, so i'll give that program a try. do you have any other thoughts?

Very very strange issue: no more activation possible (iTunes 8.2.1 on a G3)

At first, i came back to iTunes 8.2.1 because using 9.1 is no fun on a G3 PowerBook (the loudness adjustment makes the computer unusable for hours, then the vents roar and the machine crashes!).
OK, because i still wanted to remote the G3 with my iPod touch, i got iTunes 8.2.1 wich runs very good on such an old computer. I am pretty shure that i already had this version on this computer, because i made almost every update... I use this computer just for listening Music! This Computer was activated all the time and with all Versions of iTunes - from 4.0 to 9.0 !!!!
What happens now is very VERY strange and i am loosing my mind. The apple support can't help me (they also resetted all my activations).
It sounds simple, but i am no more able to activate this iTunes!!! Everything is typed well, but no chance. It says everytime that the name or password is wrong. I also can't activate Genius!
I promise, tried everything: my last attempt was to make a complete Reset of the machine (i erased the whole disk and installed everything(!!!!!) from scratch!)
But with no luck - this machine will not let me f*/("&§ng connect to my account were i payed lots of euros for my music!!!!!!!
This is in fact the strangest thing that i ever gone through on computers (and i've seen lots of strange things, believe me!)
I hope that somehone could give me a hint...

I actually found the window hiding at the bottom of my screen, being covered by my dock, and was able to drag it up.
You can also go into System Preferences, then dock and then move your dock to the left or right to find the window.

Hard drive issue, can not boot past disk utility

I got off work this morning and was wanting to do a clean install of osx10.10, unfortunately I did something bad, with my lack of sleep. I think I canceled the operation when I clicked cancel during the reinstall of OS X. Now I can not boot past the disk utility screen. There is also no sub menu under my listed hard drive "Macintosh HD." Is there a way I can fix this?
It's a brand new MBP, 15inch retina. I had it for only a week and I am at work right now. So if there is anything I can do from here that would be great!!
I also tried to reinstall OS X from the disk utility and when it asked to select disk to install OS X my only option was the recovery HD

Ok, I will try that. I still have my old MBP that I am supposed to be trading in. Good thing i haven't mailed it off yet.
I just reset the SMC and Pram and tried to boot in recovery. Once it downloaded everything online and i went to install OS X, it asked me to select and disk where i want to install. Well, there wasnt a disk listed at all...
So, now I will try to create a USB installer when i get home from work and try that out. I will keep you posted
Thanks,
Keith

This is very strange: I can't connect to only three sites!

Hello,
First of all sorry for my bad english, I hope to be enough clear to explain this strange problem.
I have recently experienced a problem fot what I have not any idea of the solution.
About one week ago, after installing the new iLife suite and iWork suite I have seen that it was impossible to connect at few web sites: Google, Version Tracker, eBay.... just this and two or three other.
All the other websites run perfectly.
I have try to trash the preferences of the browser, to change the browser (using another one: Opera, for example), to clear the cache... anything possible... but nothing happens: the three sites still can't upload.
The only solution (very hard for me) was to make one archive and install of the system, and this make all the thing OK.
Today I have downloaded all the new upgrades (from the iWork suite, to the iLife suite) and I have start to experience the same probelm.
I don't want experienced again another re-install...
Ah.. this issue coming only on the G5 desktop with the Powerbook I haven't any problem...
Anybody can give me some info or input about this?
Thanks a lot

Another interesting issue is that if I try to connect via USB mobile Phone (or bluetooth mobile phone) through the UMTS network, everything run perfect and all the website are correctly upload.
This indicates that the problem is a DNS issue. The ISP that you use normally isn't giving you reliable information about where web sites are located, while the UMTS network is providing reliable DNS information.
To test this further, try using OpenDNS addresses. This will bypass whatever DNS your ISP is using. If you're able to access Google, Versiontracker, and eBay on your normal connection after making this change, then you know the problem has to do with your ISP's DNS. You can use OpenDNS addresses indefinitely if that improves your web browsing.

Very strange hard disk problem - Boot Camp/Windows related?

On my first gen 1.83 GHz MacBook Pro (now at 10.5.2 with all System Updates applied), I've had Win XP Home installed under Boot Camp (from the very first beta, updated to the release Boot Camp assistant now) for well over a year. At one time about 14 months ago I tried using Parallels, but that used too much battery power, so I deleted Parallels. I don't know whether that left any traces of itself behind.
More recently I've been amazed at how well VMWare Fusion works on my Mac Pro, so I decided to try it on my laptop. I installed the Fusion application and tried to "adopt" my Boot Camp partition installation of Win XP. I think I goofed and didn't install VMWare tools at the proper moment, because Windows went on a self-directed hunt for drivers after installation, and when I tried to start the virtual machine inside Fusion, Windows told me it needed to be activated by Microsoft and wouldn't even allow me to log in to do the activation.
Wondering whether there might be some residual of the Parallels "hooks" to Windows contaminating things, I decided just to reinstall Windows.
I used Boot Camp Assistant to remove the Windows partition. The first clue that something was now amiss was that I decided to reboot the laptop after reclaiming the Windows partition, and when I did so I encountered a black screen with a decidedly "microsoft pre-start up" text message on my screen, something like "press any key to start up from the removable media drive", then "press any key to start up", neither of which would work (even with a bootable disk in the optical drive).
So, I rebooted holding down the option key and was able to start up Mac OS X 10.5.2. Only one volume was shown now in "About this Mac" and on my desktop, so I ran Boot Camp Assistant again to re-create a Boot Camp partition. UNFORTUNATELY, in the midst of this, I encountered my first ever kernal panic ("windowshade" effect descending down the screen and multiple-language dialog telling me I needed to reboot).
I rebooted and ran Disk Utility, which told me my partition map was wrong and that I was missing about the amount of disk space I'd allocated to Windows in my previous Boot Camp partition. I thought at THAT point I'd solved my problem - I could just run disk utility from my Leopard startup disk. HOWEVER, the Leopard installation disk will no longer reboot the laptop!
I confirmed that the problem is not the Leopard installation DVD, because it will boot my Mac Pro and it mounts on the desktop and Disk Utility says it's fine.
So, I tried to repair my laptop's drive using DiskWarrior 4. That worked (at least it made a new directory, and after it did so, when I boot into the Mac OS, Disk Utility run from the hard drive also says the disk is fine). HOWEVER, the Leopard DVD still won't boot the MacBook Pro. I made one more attempt to create a Windows partition using Boot Camp assistant, and once again generated a kernal panic in the midst of partitioning.
It seems that I've done something to the stuff on the hard drive that's needed at boot time or partitioning time. I can't erase and reformat the drive, because the Leopard install DVD won't start up the machine. Even though DiskWarrior creates a directory that Disk Utility says is fine, I cannot recreate a Windows partition.
Any advice what I can or should do next? I can try using the System Install DVD that came with the laptop, or perhaps the system restore DVD, but my bet is they won't start the machine either.
Please feel free to ask any questions, send me to any other resources, or contact me via email if you have ideas. I have a 10 day business trip beginning Sunday March 30, and I desperately need a working laptop by then.
Thanks so much.

"Responding" to my own post: the Install DVD that came with my MacBook Pro will boot it!
So, I'll try running the earlier version of Disk Utility that came on IT (10.5.4, current Leopard version is 11.0) to repair the MacBook Pro's internal hard drive, THEN see if I can boot from the Leopard install disk (the notion being that I can (groan) recreate a virgin Leopard environment on the laptop with no traces of prior disk formatting nightmares.
(a few minutes later): the Leopard Installer DVD will now boot the MacBook Pro. As one last attempt to avoid the whole reinstall nightmare, I'll try running Disk Utility from the Leopard Install DVD, and if it passes, make one more attempt to create a boot camp partition on my hard drive. If that doesn't work, next step is to wipe the internal drive and do a clean install of Leopard and all my other necessary stuff.
Any other ideas?

A VERY Strange Issue. Need some help... !!!

Ok, so here is the issue that I notice a few weeks ago... I have the 2.8Ghz 24" iMac, I think the earlier alum. one... Anyway I have a 320Gb Hard drive... Well I looked at it recently and I noticed that it claims that I am using 234 GB of my hard drive!!! And I don't think that there is ANY way for this to be possible. I have never been the type of person to "fill up" hard drive space. Never maxed out an iPod, even a 16Gb touch! I only have like 16Gb total of iTunes music, movies, TV etc. And I can't think of anything else that could take up so much Hard drive. I have boot camped my iMac, but I gave it the default 32Gb. So 32Gb there, 16Gb of iTunes and maybe a few more Gb from various things... IT DOESN'T ADD UP!!! Does anyone have a clue what could have happened? I first noticed this before I bootcamped my iMac. So if YOU have any info that could help me, it would be GREATLY appreciated! I need my hard drive back!
Thanks!

You can use a program such as
http://www.omnigroup.com/applications/omnidisksweeper/
http://grandperspectiv.sourceforge.net/
http://www.derlien.com/
(all freeware) to analyze disk space usage.

Please help, Very strange issue when generate different template

Hello, Can someone help for below Strange Problem.
1. The PDF template files are defined in BI Publisher Layout as a.pdf, b.pdf
2. the parameters are defines in BI too
4. logic as below, generated PDF based on a.pdf. generated PDF based on b.pdf,
then merger a.pdf and b.pdf together.
5. Codes for generated PDF as below
this.reportDefinitionResp = bIPublisher.getReportDefinition(this.reportAbsolutePath, this.userID, this.password);
this.reportRequest = new ReportRequest();
this.reportRequest.parameterNameValues = this.reportDefinitionResp.reportParameterNameValues;
this.reportResponse = bIPublisher.runReport(this.reportRequest, this.userID, this.password);
6. the PDF generated by the a.pdf is correct, but generated by the b.pdf is not correct, instead it is same as a.pdf?
so after merger, we get the duplicate pages.
7. Not all templates has same issue, sometime we get this issue, how to fix it?

Hi
Click your HD to go to Finder,
Go to Your User/Library/Caches,
Drag com.apple.preferencepanes.cache to trash
Restart your macbook.
Good Luck.

Very strange issue when displaying the Account PDF Factsheet.

We have a very odd situation.
We have one users (user1) who has the same business role as everyone else in the office. They can enter the UI (CRM 7), display an account and then click on the PDF Factsheet option. It seems to process and then simple says 'Done', but there's no PDF document displayed. At first I thought it was an Adobe issue, but, if someone in the office (user2) logs into SAP on user1's PC (in the same Windows session), they can perform the same process in the UI and the PDF is displayed, so it can't be a PC related issue, and must somehow be related to user1's SAP profile or role in some way.
Comparing User1 and User2's roles displays no differences, and their SU01 entries are also the same.
Can anyone come up any recommendations as to what it could be?.
I've more or less exhausted all my options.
Jason

I think we have discoverd what is causing the problem.
In CRM 7, when you view an Account (BP) the first assignment block to be show is the account details block. If you have this block collapsed (not expanded) or not on the screen at all then PDF fact sheet does not work. If I then expand the Account details block and review the PDF Fact Sheet, it then displays perfectly.
I guess there must be some dependancy of the PDF Fact sheet on the Account details block. I placed a breakpoint (normal and external) in the method of the class CL_UIU_PRN_ACCOUNT, but this code never gets called when the Account details block is collapsed. I'll have to find out what code is executed before this class/method is called.
Jason

Very strange Issue, and cannot find a reasonable solution or Tech Support help / Will PAY for HELP !!

So, without going into great details that cannot reasonably be explained, the scenario goes a little like this:
When editing a PDF, and with nothing else open on the computer, Adobe Acrobat Pro XI tends to "hang up" and become unresponsive. The only plausible solution is to force command and restart Acrobat in hopes it will open correctly the next time. Sometimes this works, other times - nope .. Does not resolve the problem. So - can anyone recommend a solution? I have contacted help and they had to to delete a Adobe Preference file, and this seemed to work while I still had them on live chat. Once offline, it happened again.
Here is the really weird thing, I thought that I fixed the issue (as I am doing this for my boss on his Macbook Pro) and was able to quickly edit a PDF .. but when I handed the computer over to him - literally in only 2 minutes - he proceeded to edit the same document and was not able to. He got the never ending rotating circle of death
So - that is problem #1
Problem #2 is with the inability my boss has to use CC offline. I have personally reconnected to our CC account and verified all settings, and when I perform my tests at the office, everything seems fine and all programs work as should. However, he is now on business travel and says the "Trial Expired" keeps popping up. What is going on? This is literally frustrating him and me with what little knowledge I can assist with resolving the trial expired issue. How many days can you be offline with CC? Tech support says up to 99 days .. Clearly 4 days is ridiculous and I am not able to duplicate the scenario when I have his computer but what would it work for me and not him?
I just need to resolve this whole Adobe Acrobat issue as to finally get it resolved and fixed once and for all.
BTW, called in outside computer help from a local company - and the computer guy was working to get it fixed, but it seems even with live chat or phone support - it has now been escalated to Tech Support 2 .. This make any sense or logic? I believe he has uninstalled and reinstalled Acrobat and now it is only creating more issues. I think he tried to install a trial version and activate the subscription but it failed.
Any HELP? We are desperate and I'll even pay via PayPal to get a resolution to this problem if any recommendation leads to a solid solution. Guaranteed !!

Actually I also noticed that usual heat with wifi and game play.. However this was extreme heat. I wasn't able to hold it for long time and had to drop it.
So can that bulge can be ignored and should I start using it back again. Though that bulge appeared after that heating issue.
Beside the hardware, safety would be my bigger concern. Perhaps because I have heard few incidents with mobile phones where battery generated heat and caused some defect in bodies and continued use resulted in a blast in battery causing physical harm.
So if its advised to try it by charging 100% and monitoring backup time or any other advise.

Very Strange Issues - Can't boot

Similar Messages

Maybe you are looking for