Very urgent friends.Making efficient editor
Hello java gurus,
Presently Iam building my own editor for a new language.I want to make this an efficient editor.
By an efficient editor i mean that when a very big file is opened into it, the whole file should not be there in the memory.I want only a part of it which is presently shown in the editor to be in memory.
I want to make a secondary storage based editor.
For that iam trying with java.nio 's memory mapped buffer.But i ve problems when mapping it with the scrollpane.
Hope u could understand the problem.
Please help me as soon as possible.
Thanks.
Crosspost!
http://forum.java.sun.com/thread.jsp?thread=562559&forum=57
http://forum.java.sun.com/thread.jsp?thread=562876&forum=57
Similar Messages
-
Urgent.. Making efficient editor
Hello java gurus,
Presently Iam building my own editor for a new language.I want to make this an efficient editor.
By an efficient editor i mean that when a very big file is opened into it, the whole file should not be there in the memory.I want only a part of it which is presently shown in the editor to be in memory.
I want to make a secondary storage based editor.
For that iam trying with java.nio 's memory mapped buffer.But i ve problems when mapping it with the scrollpane.
Hope u could understand the problem.
Please help me as soon as possible.
Thanks.Crosspost!
http://forum.java.sun.com/thread.jsp?forum=57&thread=562875
http://forum.java.sun.com/thread.jsp?thread=562876&forum=57 -
Very urgent, vendor down payment clearing - ka doc type
hello gurus,
while clearing vendor down payment, some down payment entries are posted as ka doc type. now i have to clear the invoice down payment with the ka doc type. how to do this.
for retention account we booked in special G now that retention money also paid but that doc is not showing as cleared. still it showing in red colour. but balance is nill. what to do for this..
can anybody help me very urgent friends
thanks
jayaHI ,
CHECK THI SPROCEDURE ,
DOWN PAYMENT;
Vendor A/C--a DR1
TO Bank
Invoice;
Expence a/c dr
to Vendor----
2
down payment clear:
Vendor A/C-----Adr -
3
to Vendor a/c----4.
Hi once you do the Down payment clearing only 1 & 3 line items will be cleared.
but 2&4 line items will show as open items .
This line items you have to clear .Clear this in F-44.
CHANDRA -
my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)
DVDs are encoded into MPEG2, which iMovie cannot edit. So you need to convert the DVD back to something else. For highest quality, I recommend that you convert the DVD to Apple Intermediate Codec. There is a free tool called MPEG Streamclip that will do this. You will also need to install the Apple QuickTIme MPEG2 Playback Component.
Here are the details.
1) Download and install the Apple MPEG2 QuickTime Component ($20) - available online from Apple.
2) Download and install MPEG Streamclip from Squared 5 (free).
3) Start MPEG Streamclip
4) Insert your DVD into your Mac. If DVD Player or Front Row starts automatically quit those.
5) Open a Finder window. Navigate to your DVD to the Video_TS folder.
6) Drag the .VOB files from the Video_TS folder and drop then into MPEG Streamclip.
7) If MPEG Streamclip offers to fix timecode breaks, say yes.
8) Use FILE/EXPORT TO QUICKTIME to convert the files to Apple Intermediate Codec (or h.264 if you prefer)
9a) Optional: You can deinterlace your footage in this step, if you like
9b) optional: If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
9c) Optional: If you don't want to make one huge clip out of your DVD, you can make smaller clips by using MPEG Streamclip. Move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then do steps 8 through 10 and repeat until you have done this for all clips you want.
10) Save the resulting file in a place where you can find it, like your Desktop.
11) Open iMovie.
12) In iMovie, choose FILE/IMPORT/From File and choose the file you saved in steps 8, 9, 10.
13) iMovie will generate thumbnails and you can edit. -
my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)
Welcome to the Apple Community Diane.
I find that shared video can be troublesome, a few haven't appeared to work as you describe but have done when I've looked at a later date. Hopefully they will work if you give them a bit longer. perhaps it would be a good idea if you make sure they are working before deleting them from the camera roll. -
Making a webdynpro through Web Service| VERY URGENT
Hi ,
I am having a problem in the scenario when I am trying to make a webdynpro application using a WSDL file . When I deploy the application in my first view which is a search view the field appears disabled and I am not able to input the values for the same .I have done the following ...
1) In my action search following is the code
public void onActionSearch(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionSearch(ServerEvent)
wdThis.wdFirePlugToOutputView();
wdThis.wdGetContactTestAgainController().executeSearch();
//@@end
2) in the wdDoInit method of the component controller following is the code
public void wdDoInit()
//@@begin wdDoInit()
Request_Default_siebelContactQueryByExample input =
new Request_Default_siebelContactQueryByExample();
wdContext.nodeRequest_ByExample().bind(input);
//@@end
3) In the execute search method following is the code
public void executeSearch( )
//@@begin executeSearch()
try
wdContext.currentRequest_ByExampleElement().modelObject().execute();
catch(Exception ex)
wdContext.nodeResponse().invalidate();
wdContext.nodeResult().invalidate();
//@@end
The scenario is somewhat like this . There is a proxy class being generated while importing the model by the name "Request_Default_siebelContactQueryByExample" . This class has a list inside . The relevant code for this inside the above mentioned class is as follows
private java.util.List _listOfContactInterface;
public void setListOfContactInterface (java.util.List arg)
this._listOfContactInterface = arg;
public java.util.List getListOfContactInterface ()
return _listOfContactInterface;
public void setListOfContactInterface (com.test.last.proxies.types.Contact[] args)
if(_listOfContactInterface == null) _listOfContactInterface = new java.util.ArrayList();
if (args == null ) return ;
for(int i=0;i<args.length;i++)
com.test.last.ComplexType_Contact wrapper = new com.test.last.ComplexType_Contact ();
wrapper.setOriginalBean(args<i>);
_listOfContactInterface.add(wrapper);
public com.test.last.proxies.types.Contact[] getListOfContactInterfaceAsArray ()
if(_listOfContactInterface == null) return new com.test.last.proxies.types.Contact[]{};
com.test.last.proxies.types.Contact[] ListOfContactInterfaceAsArray = new com.test.last.proxies.types.Contact[_listOfContactInterface.size()];
for(int i=0;i<_listOfContactInterface.size();i++)
com.test.last.ComplexType_Contact item = (com.test.last.ComplexType_Contact)_listOfContactInterface.get(i);
ListOfContactInterfaceAsArray<i> = item.getOriginalBean();
return ListOfContactInterfaceAsArray ;
I think I have to do something to set the values for the input the parameters . There is a field "id" that I am taking as my input but I am not sure how to set this value from the list .May be this is the reason for the whole problem .
Also if there is a cardinality issue then I have checked the context for views and the controller for the same . The cardinality appears to be 0..n for the input model node and 0..1 for the output model node that I have created and in both the cases it appears to be non editable .
This is a very urgent issue and will highly appreciate a prompt reply .
Regards
Deepak SinghHi Deepak,
I was facing the same problem with my webservice, the problem is when u create a model for a webservice, u need to create a webservice through UDDI server. When u create model u will get three option :
1) Local Server
2) Local Server URL
3) UDDI Server URL
U need to select the 3rd option and importing of webservice should be
Import webservice (deprecated) if u are using NWDS version 13.
And also refer this document, and hope your question will answered ..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/696f9c90-0201-0010-0abd-86c6c7454052
All the best
Regards,
Sameer Ali Khan -
Hi friends it is very urgent requirements
hi experts,
i have one good requirement ie
in CRMD_ORDER trancation when i give a quotation no there u will find one tab document when i click that i will get an icon for importing a file from my desktop.
so i want to make every thing with my selection-screen.
IN my selection screen i have one field for quotation no and paramater to select the document from my desktop, so when i exectute my program the document should be placed in crmd_order transcation.
very very urgent requirement.Hi,
check the below
This comes in the attributes window while creating a program
Authorization Group
Authorization group to which the program is assigned.
The assignment of a program to an authorization group plays a role whe
the system checks whether the user is authorized to:
o Execute a program
> Authorization object S_PROGRAM
o Edit a program (-Include) in the ABAP Workbench
> Authorization object S_DEVELOP
Programs that are not assigned to an authorization group are not
protected against display and execution.
Security-related programs should, therefore, always be assigned to an
authorization group.
Report RSCSAUTH can also be used to assign programs to authorization
groups. This report is documented in detail.
and for alv while designing the menu for it u can assign any ICON to your button while designing it there is option for that
reward if helpful -
UPDATE ROUTINE --- CUBE --- ODS Very Very URGENT
Hi Collegues/Friends ,
First I need to thank for the intiators of this site , as I came to know that for many
problems we will get different best solutions ... Hoping the same I am posting a question
which is very very very urgent as the client is running after me for this .
My Requirement is as Follows. ..
I Moving the data from Cube to ODS . While i need to write a routine for an extra field in
ODS based on Billing Quantity in Base Unit of Measure . The Key Field in the ODS Is UNIQKEY
Transaction and It is a Characterstic in the Cube and we have MAterial as another
Characteristic and core element as navigational attribute .
In the Cube for every UNIQKEY transaction- there are more than One line items.
My data fields in the ODS are Billing Quantity in Base Unit of MEasure and and EXTRA FIELD
: No of Items in Transaction . But the thing is that I have only Billing Quantity in Base
Unit of Measure in cube as a key figure
BAsing on the UNIQKEY transcation and Billing Quantity In Base Unit Of Measure I need to
populate the No of Items in Transaction... For this i need to write a routine .
Let suppose say that for the Materials the core elements are as follows
Material Core element
10 1 -- fuel -- In liters
20 2 -- Cigar - in PAck
30 3 -- Coke - in Cans
Now Lets see how the records are there in InfoCUbe
Uniqkey / Material / Core element /Billin Quantiy
A / 10 / 1 / 22
B / 30 / 3 / 2
C / 10 / 1 / 15
C / 30 / 3 / 2
D / 20 / 2 / 10
D / 30 / 3 / 2
And IN the ODS -- I need to Populate the No OF items in Transaction.
the Logic behind this as follows .
1.if Materail is of type 1(Mean if the core element - 1)
I need to Populate the No of items in tnx = 1
2.If Material id of type 2 or 3 I need to populate the billing quantity to the no of
transcations.
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of
fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing
Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line
item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1
(replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the
Transcation = 3
For this I have Written a Rouinte like this for that field
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
RETURNCODE LIKE SY-SUBRC "Do not use!
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
INTO CORE_ELEMENT
from /BI0/PMATERIAL
where
material = COMM_STRUCTURE-material
and OBJVERS <>'D'.
IF CORE_ELEMENT EQ '1'.
TITEMS = '1'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = titems
IMPORTING
OUTPUT = titems
ELSE.
TITEMS = COMM_STRUCTURE-BILL_QTY.
ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Does it satisfy all the conditions ?? mentioned above if . As far As i know as the only key
field in the transcation it will satisfy the first two conditions .
I want to know or If possioble anybody pls take some pain for me to send the code or any
Ideas for satisfying all the conditions.
Hope I will get immediate replies....
Mail me to [email protected]Reddy,
Please do not post in all sections ... makes it hard to follow up on posts..
Arun -
Please help me with the following two questions, very urgent
Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10) -
Default GL Assignment to Tax Code - Very Urgent
Dear Friends,
When I am doing the T. Code MIRO, the Service tax receivables and Education cess receivables are automatically coming in the accounting entry.
The entry is as follows :
GR / IR A/c Dr 10500
Service Tax Receivables Dr 315
Education Cess Receivables Dr 6. 30
To Vendor Account 10821.30
Actually this is Service vendor transaction. So, I did the following transactions in MM.
1. Created Purchase order u2013 I gave Tax code as S6 in that.
2. Created Service sheet through T. Code u2013 ML81N u2013 in this I gave the cost center and GL A/c ( GL A/c is -- Lease Rentals )
3. Invoice Posting through T.Codeu2013MIRO u2013 in this also mentioned the Tax Code-S6
Note : As per MM Consultant we should not do the MIGO because this is service vendor and when we release the service sheet then automatically MIGO entry will post.
So, in the above 3 transactions ( MM ), Any where I did not mentioned the Service tax recv and Education cess recv GL accounts manually.
Our client is following the CIN u2013 TAX INN procedure.
Account keys u2013 ESA and ESE are updating in the above transaction.
I checked the following T. Codes for automatic assignment of GL accounts to the Tax Code.
1. OBYC
2. OB40
3. OBQ3
4. FTXP
5. FV 11 & 12 & 13
6. OKB9
7. Validations and Substitutions
8. User Exists
9. spro u2013 Logistics general u2013 Tax on goods movement u2013 India u2013
10. FBKP
11. OB28, OBBH , OBCN , GGB0, GBB1 , GBX2.3
So, In all the above T. Codes I did not find any assignment of GL Accounts to the above said Tax Code u2013 S6.
Now problem is My client is saying that the 2 GL accounts i.e. Service tax recv and Education cess recv GL accounts should not effect when they use Tax Code S6.
I am not able to find where these GL accounts are assigned to the Tax Code u2013 S6.
SO , KINDLY EXPLAIN ME WHERE THESE 2 GL ACCOUNTS ARE ASSIGNED TO THE TAX CODE .
Its very urgent, looking forward for an early and positive reply.
Thanking You,
Regards,
K. S. Sai Kumar
09930870886
Hyderabad.Dear All,
I checked the following T. Codes for automatic assignment of GL accounts to the Tax Code.
1. OBYC
2. OB40
3. OBQ3
4. FTXP
5. FV 11 & 12 & 13
6. OKB9
7. Validations and Substitutions
8. User Exists
9. spro u2013 Logistics general u2013 Tax on goods movement u2013 India u2013
10. FBKP
11. OB28, OBBH , OBCN , GGB0, GBB1 , GBX2.3
So, In all the above T. Codes I did not find any assignment of GL Accounts to the above said Tax Code u2013 S6.
Thanking You,
Regards,
K. S.Sai Kumar -
Asset back dated GRN.(Very urgent)
Dear Gurus,
My client is facing an issue that while making backlog they missed out to pass Some asset GRN related to Asset, say for the month April and May after all verifications they came to know that some of the Asset GRN is missing.
know the issue is now if we want to post asset GRN for the month April and MAY it is not possible because we closed the Posting period in MM till OCT.
so please any one suggest me how to post these entries if we take current date our depreciation calculation will be showing wrong Values.
Please Suggest this is very urgent.
Thanks in Advance
SU*Dear Sivaji<
u can do this way
1) change the Dep. key in u r Asset master (0%) dep. key
2) run the Dep. run once again with Rep Run or Re Start run. ( in this case system shows u the dep. 0 for this asset.
before runing the Dep. better to check the ANLP table and after that also
3) cancell the GRN with MM Consultant help
4) cancell the PO
Regards
radha -
Very Urgent, files, threads, and swing !!!!
Dear friends, i have a swing application, in that application i have a class that extends a thread, that thread will do nothing but read the contents of my data file and puts them in an array, but i am getting a NullpointerException in my thread, could any friend help me please, it is very urgent, i will post my code below.
import java.awt.*;
import java.awt.event.*;
import java.text.DateFormat;
import java.util.*;
import javax.swing.*;
import java.sql.*;
import java.net.URL;
import java.io.*;
public class FinalMachine extends JFrame
private JPanel MainPanel, ThicknessPanel, MainManager,fieldsPanel, sub_panel;
private Container c;
private CardLayout CardManager;
private String timezone;
private static final int ONE_SECOND = 1000;
private JLabel welcome_label, label1, label2, label3,field_label;
private JTextField data_entry;
private Connection connection;
public JPanel thick_figure;
public int num_of_hits, next_index, recCount;
public int dataBuffer[];
public FileReader data_file;
public BufferedReader b_data_file;
public File tem_file;
final int num_of_rec = 20;
public FinalMachine()
super("PHOENIX MACHINERY s.a.l");
/* Start all threads */
/* Start filling data file in global array */
loadData dataFile = new loadData();
dataFile.start();
/* Adding control to window application */
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent windowevent)
// setDefaultCloseOperation(0);
System.exit(0);
public void windowDeiconified(WindowEvent eve)
setState(0);
addComponentListener(new ComponentAdapter() {
public void componentResized(ComponentEvent componentevent)
setSize(500, 500);
Dimension dimension1 = Toolkit.getDefaultToolkit().getScreenSize();
if(dimension1.width == 800 && dimension1.height == 600)
setLocation(150, 25);
else
if(dimension1.width == 1024 && dimension1.height == 768)
setLocation(200, 100);
/* Setting the location of the application on the screen */
Dimension dimension = Toolkit.getDefaultToolkit().getScreenSize();
if(dimension.width == 800 && dimension.height == 600)
setLocation(150, 25);
else
if(dimension.width == 1024 && dimension.height == 768)
setLocation(200, 100);
/* Constructing the main menu */
JMenuBar bar = new JMenuBar();
setJMenuBar( bar );
JMenu fileMenu = new JMenu( "File");
fileMenu.setMnemonic( 'F' );
JMenuItem mainItem = new JMenuItem( "Main page" );
mainItem.setMnemonic( 'M' );
mainItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
CardManager.show(MainManager, "main");
fileMenu.add( mainItem );
JMenuItem dataItem = new JMenuItem( "Database page" );
dataItem.setMnemonic( 'D' );
dataItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
CardManager.show(MainManager, "data_base");
fileMenu.add( dataItem );
JMenuItem printItem = new JMenuItem( "Print" );
printItem.setMnemonic( 'P' );
printItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
PrintUtilities.printComponent(MainManager);
fileMenu.add( printItem );
JMenuItem exitItem = new JMenuItem( "Exit" );
exitItem.setMnemonic( 'P' );
exitItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
System.exit(0);
fileMenu.add( exitItem );
bar.add( fileMenu );
JMenu figureMenu = new JMenu( "Figures");
figureMenu.setMnemonic( 'G' );
JMenuItem thicknessItem = new JMenuItem( "Thickness" );
thicknessItem.setMnemonic( 'T' );
thicknessItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
CardManager.show(MainManager, "thickness");
figureMenu.add( thicknessItem );
bar.add( figureMenu );
JMenu helpMenu = new JMenu( "Help");
helpMenu.setMnemonic( 'H' );
JMenuItem aboutItem = new JMenuItem( "About us" );
aboutItem.setMnemonic( 'A' );
aboutItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
JOptionPane.showMessageDialog(null, "Engineer Bilal Haidar (Computer & "+ "Communication Engineering)\n\n All Rights Reserevd. @ 2002",
"About me...", JOptionPane.PLAIN_MESSAGE);
helpMenu.add( aboutItem );
bar.add( helpMenu );
/* Intializing global values */
dataBuffer = new int[60];
/* Initializing the panels */
c = getContentPane();
c.setLayout(new FlowLayout());
CardManager = new CardLayout();
MainManager = new JPanel(false);
MainManager.setLayout(CardManager);
c.add(MainManager);
javax.swing.border.Border border = BorderFactory.createEmptyBorder(10, 10, 5, 10);
MainPanel = new JPanel(false);
MainPanel.setLayout(new BoxLayout(MainPanel, 1));
MainPanel.setBorder(border);
ThicknessPanel = new JPanel(false);
ThicknessPanel.setLayout(new BoxLayout(ThicknessPanel, 1));
ThicknessPanel.setBorder(border);
fieldsPanel = new JPanel(false);
fieldsPanel.setLayout( new BoxLayout( fieldsPanel,1));
fieldsPanel.setBorder(border);
sub_panel = new JPanel(false);
sub_panel.setLayout( new BoxLayout(sub_panel,0) );
sub_panel.setBorder(border);
thick_figure = new JPanel(false);
thick_figure.setBorder(border);
/* Filling the main panel */
JLabel jlmain = new JLabel("Main Page");
MainPanel.add(jlmain);
timezone = showTime(new Locale("en", "US"));
JLabel jltime = new JLabel(" " + timezone);
MainPanel.add(jltime);
MainManager.add(MainPanel, "main");
/* Filling the thickness panel */
num_of_hits = 0;
next_index = 0;
/* fill in with ero values for everything*/
/*display the figure*/
ThicknessPanel.add(thick_figure);
JLabel blanklabel = new JLabel(" ");
ThicknessPanel.add(blanklabel);
JButton build_fig = new JButton("Draw Figure");
build_fig.addActionListener(
new ActionListener() { // anonymous inner class
public void actionPerformed( ActionEvent e )
if ( num_of_hits == 0 )
/* draw figure based on first 20 points in the array */
next_index = num_of_rec;
else
if ( num_of_hits > 3 )
JOptionPane.showMessageDialog(null,"No more data to draw","Error Drawing",JOptionPane.ERROR_MESSAGE);
else
/* draw the figure starting the data from index 20*/
next_index = next_index + num_of_rec;
num_of_hits += 1;
ThicknessPanel.add(build_fig);
MainManager.add(ThicknessPanel, "thickness");
/* filling the database panel */
label1 = new JLabel(" ",SwingConstants.CENTER);
welcome_label = new JLabel(" Database Page ",SwingConstants.CENTER);
label2 = new JLabel(" ",SwingConstants.CENTER);
fieldsPanel.add( label1 );
fieldsPanel.add( welcome_label );
fieldsPanel.add( label2 );
field_label = new JLabel(" Enter your name: ");
data_entry = new JTextField( 10 );
sub_panel.add( field_label );
sub_panel.add( data_entry );
fieldsPanel.add( sub_panel );
JButton add_data = new JButton( "Add me" );
add_data.addActionListener(
new ActionListener() { // anonymous inner class
public void actionPerformed( ActionEvent e )
// try {
// url = "jdbc:odbc:DataEntry";
// Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" );
// connection = DriverManager.getConnection( url );
// System.out.println( "Connection Suucessfull");
// Statement statement = connection.createStatement();
// String get_field;
// get_field = data_entry.getText();
// String query = "INSERT INTO data (anyField) VALUES ('get_field')";
// int result1 = statement.executeUpdate( query );
// if ( result1 == 1 )
// JOptionPane.showMessageDialog(null, "Thanks for the info..."," Data Entry Success",JOptionPane.INFORMATION_MESSAGE);
// else
// JOptionPane.showMessageDialog(null, "Sorry, your name was not added...","Data entry error",JOptionPane.ERROR_MESSAGE);
// catch ( ClassNotFoundException cnfex ) {
// // process ClassNotFoundExceptions here
// cnfex.printStackTrace();
// System.out.println( "Connection UN Suucessfull");
// catch ( SQLException sqlex ) {
// // process SQLExceptions here
// sqlex.printStackTrace();
// System.out.println( "Connection UN Suucessfull");
// catch ( Exception ex ) {
// // process remaining Exceptions here
// ex.printStackTrace();
// System.out.println( "Connection UN Suucessfull");
fieldsPanel.add(add_data);
MainManager.add(fieldsPanel, "data_base");
/* display time */
Timer timer = new Timer(1000, new ActionListener() {
public void actionPerformed(ActionEvent actionevent)
timezone = showTime(new Locale("en", "US"));
setTitle("PHOENIX MACHINERY s.a.l " + timezone);
timer.start();
public static void main(String args[])
FinalMachine finalmachine = new FinalMachine();
finalmachine.setSize(500, 500);
ImageIcon imageicon = new ImageIcon("images/pc.gif");
finalmachine.setIconImage(imageicon.getImage());
finalmachine.show();
public static String showTime(Locale locale)
java.util.Date date = new java.util.Date();
byte byte0 = 2;
DateFormat dateformat = DateFormat.getTimeInstance(byte0, locale);
String s = dateformat.format(date);
return s;
/* Thread loadData starts here */
class loadData extends Thread
public void run()
try {
readMyFile();
catch( Exception x )
System.out.println("The following error occured in LoadData thread : "+x.toString() ); }
} // run() ends here
/* method read file inside thread loadData */
void readMyFile() {
String record = " ";
recCount = 0;
try {
tem_file = new File("mydata.dat");
data_file = new FileReader(tem_file);
b_data_file = new BufferedReader( data_file );
record = new String();
while ( (record = b_data_file.readLine()) != null ) {
dataBuffer[recCount] = Integer.parseInt(record);
recCount += 1; }
b_data_file.close();
catch (IOException e) {
System.out.println("Uh oh, got an IOException error!");
e.printStackTrace();
} // end of readMyFile()
} // thread loadData ends
mydata.dat
2
4
3
1
2
3
5
2
4
1
6
3
2
5
4
1
2
5
8
2
6
9
7
4
2
1
0
2
5
4
8
7
5
6
3
2
1
4
3
0
2
3
6
5
2
1
4
5
6
9
8
5
2
1
6
8
3
1
7
5Thank you Mr. jobuck, you helped me a lot, i wonder if you can provide me with a tutorial on how threads work and how runnables work too. i fixed the error ut old me about but still when i try to add another thread to my program i got an error saying that, i must decalre the new thread in a seperate file please can u have a look on what i have:
import java.awt.*;
import java.awt.event.*;
import java.text.DateFormat;
import java.util.*;
import javax.swing.*;
import java.sql.*;
import java.net.URL;
import java.io.*;
public class FinalMachine extends JFrame
private JPanel MainPanel, ThicknessPanel, MainManager,fieldsPanel, sub_panel;
private Container c;
private CardLayout CardManager;
private String timezone;
private static final int ONE_SECOND = 1000;
private JLabel welcome_label, label1, label2, label3,field_label;
private JTextField data_entry;
private JPanel thick_figure;
private int num_of_hits, next_index, recCount, read_flag;
private int dataBuffer[];
private FileReader data_file;
private BufferedReader b_data_file;
private File tem_file;
private Connection connection;
final int num_of_rec = 20;
public FinalMachine()
super("PHOENIX MACHINERY s.a.l");
/* load JDBC drivers */
try {
String url = "jdbc:odbc:DataEntry";
Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" );
connection = DriverManager.getConnection( url );
System.out.println( "Connection Suucessfull");
catch ( ClassNotFoundException cnfex ) {
// process ClassNotFoundExceptions here
cnfex.printStackTrace();
System.out.println( "Connection UN Suucessfull");
catch ( SQLException sqlex ) {
// process SQLExceptions here
sqlex.printStackTrace();
System.out.println( "Connection UN Suucessfull");
catch ( Exception ex ) {
// process remaining Exceptions here
ex.printStackTrace();
System.out.println( "Connection UN Suucessfull");
/* Intializing global values */
dataBuffer = new int[60];
/* Start all threads */
/* Start filling data file in global array */
loadData dataFile = new loadData();
dataFile.start();
setData setdata = new setData();
setdata.start();
/* Adding control to window application */
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent windowevent)
// setDefaultCloseOperation(0);
System.exit(0);
public void windowDeiconified(WindowEvent eve)
setState(0);
addComponentListener(new ComponentAdapter() {
public void componentResized(ComponentEvent componentevent)
setSize(500, 500);
Dimension dimension1 = Toolkit.getDefaultToolkit().getScreenSize();
if(dimension1.width == 800 && dimension1.height == 600)
setLocation(150, 25);
else
if(dimension1.width == 1024 && dimension1.height == 768)
setLocation(200, 100);
/* Setting the location of the application on the screen */
Dimension dimension = Toolkit.getDefaultToolkit().getScreenSize();
if(dimension.width == 800 && dimension.height == 600)
setLocation(150, 25);
else
if(dimension.width == 1024 && dimension.height == 768)
setLocation(200, 100);
/* Constructing the main menu */
JMenuBar bar = new JMenuBar();
setJMenuBar( bar );
JMenu fileMenu = new JMenu( "File");
fileMenu.setMnemonic( 'F' );
JMenuItem mainItem = new JMenuItem( "Main page" );
mainItem.setMnemonic( 'M' );
mainItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
CardManager.show(MainManager, "main");
fileMenu.add( mainItem );
JMenuItem dataItem = new JMenuItem( "Database page" );
dataItem.setMnemonic( 'D' );
dataItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
CardManager.show(MainManager, "data_base");
fileMenu.add( dataItem );
JMenuItem printItem = new JMenuItem( "Print" );
printItem.setMnemonic( 'P' );
printItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
PrintUtilities.printComponent(MainManager);
fileMenu.add( printItem );
JMenuItem exitItem = new JMenuItem( "Exit" );
exitItem.setMnemonic( 'P' );
exitItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
System.exit(0);
fileMenu.add( exitItem );
bar.add( fileMenu );
JMenu figureMenu = new JMenu( "Figures");
figureMenu.setMnemonic( 'G' );
JMenuItem thicknessItem = new JMenuItem( "Thickness" );
thicknessItem.setMnemonic( 'T' );
thicknessItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
CardManager.show(MainManager, "thickness");
figureMenu.add( thicknessItem );
bar.add( figureMenu );
JMenu helpMenu = new JMenu( "Help");
helpMenu.setMnemonic( 'H' );
JMenuItem aboutItem = new JMenuItem( "About us" );
aboutItem.setMnemonic( 'A' );
aboutItem.addActionListener (
new ActionListener() {
public void actionPerformed( ActionEvent e )
JOptionPane.showMessageDialog(null, "Engineer Bilal Haidar (Computer & "+ "Communication Engineering)\n\n All Rights Reserevd. @ 2002",
"About me...", JOptionPane.PLAIN_MESSAGE);
helpMenu.add( aboutItem );
bar.add( helpMenu );
/* Initializing the panels */
c = getContentPane();
c.setLayout(new FlowLayout());
CardManager = new CardLayout();
MainManager = new JPanel(false);
MainManager.setLayout(CardManager);
c.add(MainManager);
javax.swing.border.Border border = BorderFactory.createEmptyBorder(10, 10, 5, 10);
MainPanel = new JPanel(false);
MainPanel.setLayout(new BoxLayout(MainPanel, 1));
MainPanel.setBorder(border);
ThicknessPanel = new JPanel(false);
ThicknessPanel.setLayout(new BoxLayout(ThicknessPanel, 1));
ThicknessPanel.setBorder(border);
fieldsPanel = new JPanel(false);
fieldsPanel.setLayout( new BoxLayout( fieldsPanel,1));
fieldsPanel.setBorder(border);
sub_panel = new JPanel(false);
sub_panel.setLayout( new BoxLayout(sub_panel,0) );
sub_panel.setBorder(border);
thick_figure = new JPanel(false);
thick_figure.setBorder(border);
/* Filling the main panel */
JLabel jlmain = new JLabel("Main Page");
MainPanel.add(jlmain);
timezone = showTime(new Locale("en", "US"));
JLabel jltime = new JLabel(" " + timezone);
MainPanel.add(jltime);
MainManager.add(MainPanel, "main");
/* Filling the thickness panel */
num_of_hits = 0;
next_index = 0;
/* fill in with ero values for everything*/
/*display the figure*/
ThicknessPanel.add(thick_figure);
JLabel blanklabel = new JLabel(" ");
ThicknessPanel.add(blanklabel);
JButton build_fig = new JButton("Draw Figure");
build_fig.addActionListener(
new ActionListener() { // anonymous inner class
public void actionPerformed( ActionEvent e )
if ( num_of_hits == 0 )
/* draw figure based on first 20 points in the array */
next_index = num_of_rec;
else
if ( num_of_hits > 3 )
JOptionPane.showMessageDialog(null,"No more data to draw","Error Drawing",JOptionPane.ERROR_MESSAGE);
else
/* draw the figure starting the data from index 20*/
next_index = next_index + num_of_rec;
num_of_hits += 1;
ThicknessPanel.add(build_fig);
MainManager.add(ThicknessPanel, "thickness");
/* filling the database panel */
label1 = new JLabel(" ",SwingConstants.CENTER);
welcome_label = new JLabel(" Database Page ",SwingConstants.CENTER);
label2 = new JLabel(" ",SwingConstants.CENTER);
fieldsPanel.add( label1 );
fieldsPanel.add( welcome_label );
fieldsPanel.add( label2 );
field_label = new JLabel(" Enter your name: ");
data_entry = new JTextField( 10 );
sub_panel.add( field_label );
sub_panel.add( data_entry );
fieldsPanel.add( sub_panel );
JButton add_data = new JButton( "Add me" );
add_data.addActionListener(
new ActionListener() { // anonymous inner class
public void actionPerformed( ActionEvent e )
try {
Statement statement = connection.createStatement();
String get_field;
get_field = data_entry.getText();
String query = "INSERT INTO data (anyField) VALUES ('"+get_field+"')";
int result1 = statement.executeUpdate( query );
if ( result1 == 1 )
JOptionPane.showMessageDialog(null, "Thanks for the info..."," Data Entry Success",JOptionPane.INFORMATION_MESSAGE);
data_entry.setText(" ");
else
JOptionPane.showMessageDialog(null, "Sorry, your name was not added...","Data entry error",JOptionPane.ERROR_MESSAGE);
catch ( SQLException sqlex ) {
// process SQLExceptions here
sqlex.printStackTrace();
System.out.println( "Connection UN Suucessfull");
catch ( Exception ex ) {
// process remaining Exceptions here
ex.printStackTrace();
System.out.println( "Connection UN Suucessfull");
fieldsPanel.add(add_data);
MainManager.add(fieldsPanel, "data_base");
/* display time */
Timer timer = new Timer(1000, new ActionListener() {
public void actionPerformed(ActionEvent actionevent)
timezone = showTime(new Locale("en", "US"));
setTitle("PHOENIX MACHINERY s.a.l " + timezone);
timer.start();
public static void main(String args[])
FinalMachine finalmachine = new FinalMachine();
finalmachine.setSize(500, 500);
ImageIcon imageicon = new ImageIcon("images/pc.gif");
finalmachine.setIconImage(imageicon.getImage());
finalmachine.show();
public static String showTime(Locale locale)
java.util.Date date = new java.util.Date();
byte byte0 = 2;
DateFormat dateformat = DateFormat.getTimeInstance(byte0, locale);
String s = dateformat.format(date);
return s;
/* Thread loadData starts here */
public class loadData extends Thread
public void run()
try {
readMyFile();
read_flag = 1;
notify();
catch( Exception x )
System.out.println("The following error occured in LoadData thread : "+x.toString() );
} // run() ends here
/* method read file inside thread loadData */
void readMyFile() {
String record = " ";
recCount = 0;
try {
tem_file = new File("mydata.dat");
data_file = new FileReader(tem_file);
b_data_file = new BufferedReader( data_file );
record = new String();
while ( (record = b_data_file.readLine()) != null ) {
dataBuffer[recCount] = Integer.parseInt(record);
recCount += 1; }
b_data_file.close();
catch (IOException e) {
System.out.println("Uh oh, got an IOException error!");
e.printStackTrace();
} // end of readMyFile()
} // thread loadData ends
public class setData extends Thread {
public void run()
try {
while ( !read_flag ) {
try { wait(); }
catch( InterruptedException e ) {
e.printStackTrace();
} // end while
for(int index = 0; index < 60; index++)
System.out.println("Array["+index+"] = "+dataBuffer[index]);
catch( Exception x )
System.out.println("The following error occured in LoadData thread : "+x.toString() );
} // run() ends here
the only added thing is the setData thread, i want this thread to start printing out the array whenever, loadData thread has finished filling the data inside the array please i need ur help. -
Attachment issue --very urgent help required
Hello friends,
1)i have create page and deatal page . requirement is that we have to load required attachments in table region, if not loading required attachments exception will raise. this validation is working fine in create page.
2)same in detail page i loaded required attachments also excepiton is raising.
waht would be cause. i am very new to ADF technology.
very urgent to fix this issue. any one help me out.
Thanks,
vamshi.
Edited by: Krishna Vamshi on Jul 1, 2010 6:14 PMKirshna,
Unfortunately your question is very unclear.
Let me say that if you are asking about OA Framework, you should ask on the OA Framework forum, not here.
also excepiton is raising.It will help if you say what the exception is.
John -
Generic Data Source Creation (Very Urgent)
Hi Friends,
I am getting errors while i am creating Generic Data source using Table "ECMCT" .This table contains all fields which is required for my Data Source.
---> I gave <b>ECMCT</b> table in "Extraction from DB view " but when i click save its showing error message "INVALID EXTRACT STRUCTURE TEMPLATE ECMCT OF DATASOURCE ZFI_ECMCT(is name of my data source)".
> I created Function Module using this Table.
In Function Module "Tables tab"
i gave "ITAB LIKE ECMCT".
In "Source Code tab"
i gave "SELECT * FROM ECMCT INTO TABLE ITAB".
In RSO2 "Extraction Using Function Module"
i gave FM name and Extract Structure name as ECMCT. After clicking save its showing ERRORS:
1) ZFI_ECMCT(is my data source name) : Tables parameter E_T_DATA for Extractor ZFI_CONSOLIDATION(is my Function module)
2) Units field CURR1 for feild HSLVT of datasource ZFI_ECMCT is hidden.
3) ......................................HSL01.....................................................
4)........................................HSL02...................................................
;etc.
Could u anybody suggest me where i am doing wrong. This is very very urgent for me.
Thanks,
Mani.Hi,
For " Extraction Using Table" the system does not create an extract structure automatically if the Amount field (type CURR) and currency key field (type CUKY ) are in different tables . Hence u create a View of the data table and the reference table (Say PA0002 and T001) wherein, include all the fields from PA0002 and just the referenced fields from T001 so that all the fields come under the view.
But if the above solution is not possible say for ex. if the key fields don't match , then u should go for function modules.
Regards -
Very Urgent..How to create a report Using SQ01 and Sq02.
Hi Friends,
It's very urgent.pl help me in generating a report using SQ01 and SQ02.
Help is appreciated.
thanks In advance.
Regards,
Nanditha.Check out these links...
http://www.insightcp.com/res_15.htm
http://www.ams.utoronto.ca/Assets/output/assets/adhoc_2990830.pdf.pdf
Also, do basic search in this forum...you will find a lot of threads related to this.
SKR
Maybe you are looking for
-
IMessage on the iPhone 6 doesn't allow me to sign in with my current email
Hey guys, So here's the problem - I can send and receive texts/iMessages on my iPhone 6. I cannot, however, hook up my macbook pro to the same account to use the messaging service with, as Apple has said would be possible (answer texts on my macbook
-
Windows 8 driver cannot find HP Officejet Pro L7590 ethernet printer on my new router
I'm changing to a new router and had to change the IP address of my ethernet Officejet Pro L7590 from fixed assigned 192.168.1.7 into fixed assigned 192.168.2.168 (my new provider provided router doesn't support the 192.168.1.xx range). At installati
-
Q: Is there a TV-out in iPhone?
Hello! Please, can anyone tell me - can I buy an AV kit (for iPod) and play videos form my iPhone on my TV? Thanks!
-
Iphone5 home button not working
my home button is not working how do i activate it again??please help asap!!
-
.