Vi for Agilent E4446A HPE4406

Hi; I am trying to write a Labview vi for a spectrum analyser from Agilent (E4446A), which I have only for a few days. The resources of Agilent didn't help.
Is there perhaps someone who could help me? Someone who perhaps used the same who has already written up .vis for this analyser. The only thing I would need to do is to have access to the center frequency, videa averaging and the read out of the trace.
Any help would be great.
B.
I did download plug and play drivers for HPE4406 which should work with the Agilent (E4446A). And with a lot of help from Ni these were translated to labview vi's, but in the end it doesn't work...

Hi,
Although I haven't worked with this device, I was looking through the E4446A web site. I noticed that this instrument offers the PSA Series Option 266 - HP 8566/68B Programming Code Compatibility, which would allow you to use the programming commands of the older model spectrum analyzers.
You can find a LabVIEW Plug and Play Agilent Technologies 8566B LabVIEW Plug and Play Instrument Driver instrument driver. This driver is made completely in LabVIEW, so it should be easy to analyze.
Hope this alternative helps or at least provides more ideas.
DiegoF
National Instruments.Message Edited by Molly K on 02-18-2005 11:50 PM

Similar Messages

  • Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

    I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
    Does anyone have one?
    Thanks,
    Avner

    Hello,
    It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
    Thank you,
    JLS
    Best,
    JLS
    Sixclear

  • VIs for Agilent 33250A (function generator) and SR-844 (lock-in)

    I am new to Labview. I was unable to find VIs for Agilent 33250A (function generator) and SR-844 (lock-in). Can someone help me find these?
    Solved!
    Go to Solution.

    What did you actually search for? I just went to the Instrument Driver Network, entered '33250A', found it's driver, entered '844', and also found it's driver. I did not try this from the Tools menu in LabVIEW but it should also have found them.

  • Looking for Labview driver for Agilent 4294A (HP)

    Help!
    I've been browsing the driver database looking for the Labview GPIB driver
    for Agilent(formerly HP) 4294A Gain-Phase Analyzer.
    Does anyone know where I can get it?

    Hello all,
    NI is interested in developing LabVIEW and CVI drivers for the Agilent 4294A. I have been trying to obtain one of these units on loan from Agilent for the past couple of years with no success. If anyone can spare their 4294A for the duration of driver development or can influence Agilent to loan a 4294A, NI will write certified CVI and LabVIEW drivers for it.
    Jason Hobbs
    Instrument Drivers

  • Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

    I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

    Hi,
    There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
    Multi-Environment Certified IVI Instrument Driver
    Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
    The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
    Try LabVIEW 7.1 FREE Online
    If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
    -John M

  • Error when setting JMS Destination  for Agile PLM Content Services (cannot

    In not the right forum please suggest the correct one.
    Before creating the destination I did the following setup and testing.
    1.) Created a JMS on the Weblogic Server
    2.) Created a Jdeveloper BPEL Project and successfully put a message into the JMS queue
    Here are the details for the new destination I am creating.
    1.) Protocol = JMS
    2.) Provider Context Factory = weblogic.jndi.WLInitialContextFactory
    * this is the one that seems to be the cause of the error
    3.) Connection Factory = jmstest/jmstest-cp
    * this is my JNDI name for the connection pool
    4.) Default Provider URL = t3://10.16.131.110:7001
    * this is the URL for the Weblogic server
    5.) Destination Name = jms/queueout
    * this is the JNDI name for the queue
    The error message I am getting when I click the button to "Test Destination" is
    "The remote server returns the following message: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory"
    I would appreciate any input
    Thanks

    Which version of Agile are you using?
    There is a patch needed for agile 9.2 for weblogic server.
    Please check the Metalink

  • Extensibility Pack 3.6 for Agile PLM for Process 6.1.1.1 is now available

    Extensibility Pack 3.6 for Agile PLM for Process 6.1.1.1 is now on Oracle Software Delivery Cloud
    We are pleased to announce the General Availability of Agile PLM for Process Extensibility Pack 3.6 as of October 30th, 2013.
    Extensibility Pack 3.6 provides two new technical enablement features:
    Email Extensibility
    Customizing the content of workflow emails in GSM and SCRM without custom code is now easier with the addition of a new set of placeholder variables, conditional variables, and other capabilities. These variables are available by deploying a new set of plugins, which can be configured through the CustomPluginExtensions.xml file.
    Some examples of the new functionality include:
    Displaying new data in the emails, such as the workflow Comment, Cross Reference numbers, Category/Sub-category/Group, a trade specification’s GTIN, a material specification’s Ingredient Statement, etc.
    Providing meaningful related specification information in Signature Document emails.
    Conditionally displaying data, such as only including a material specification’s classification if it is an Approved status.
    User Interface Extensibility
    Clients wishing to customize specific User Interface behavior, such as marking certain fields as read only, or applying formatting to show required fields, will be able to do this using the User Interface Extensions feature. Clients can write simple Javascript code which then gets pulled into the desired user interface pages. The Javascript code can leverage useful new Javascript variables and functions that make it easier to perform user interface manipulation, as well as access specific data from the given item (e.g., the specification’s status, the user’s groups, etc).
    Watch the introductory video on the User Collaboration site for a high level overview.
    More information on these new features can be found in the Extensibility Guide, along with detailed technical documentation.

    Hello dirk and Kyle203,
    I have PCI 8532 devicenet card in my system, the test unit has devicent implemented in it,
    to verify devicenet is working or not we check whether we can read Devicenet vendor id, I have downoaded the latest driver NI-IndComDNET2.1-Beta1.
    Thanks for the new update. I developed a VI which is very similar to GetIdentityAttrs VI which is in Example.
    Port opens fine, but I cannot see connection being established.I always get the error Error -1074388991 occurred at Get DeviceNet Attribute.vi
    I know connections are proper and the Device MAC ID and speed too. Pls throw some light.'
    Attached is the VI and error image
    Thanks
    Attachments:
    devicenet.vi ‏18 KB
    devicenet error.JPG ‏32 KB

  • How to start the file server for Agile PLM

    when i try to add one attachment for an Item, i got the following error message:
    The preferred file server http://agileserver:8080/Filemgr/AttachmentServlet for user : xxx is down
    how to startup the file mgr?

    Hi is this looks like a question for Agile A9.
    For Agile A9 or Primavera questions, you can use Oracle Support, Support Communities, Yahoo Groups for Agile API or WRAU.
    This forum is for Agile PLM for Process, which is part of the same Agile family but a different product.
    Thanks.

  • LabVIEW drivers for Agilent Noise Source 346B and Signal Generator E8257C-520

    Could anyone please tell me where to find LabVIEW drivers for Agilent Noise Source 346B and Agilent Signal Generator E8257C-520. I did not find them on NI's web site. Thank you!

    To my knowledge, the Agilent 346B Noise Source is not a programmatically controllable instrument and therefore we can't create an instrument driver. I suppose it is possible to be controlled through an instrument (like the PSG) but I don't see any documentation on this.
    As for the E8257C, we are insterested in providing a LabVIEW driver for this instrument series. Let me know if you are interested in assisting our development effort by loaning us the instrument.
    Jason Hobbs
    Instrument Drivers

  • Labview drivers for agilent e4432b ,can`t find way to control multitone ???

    labview drivers for agilent e4432b ,can`t find way to control multitone ???How to deal with it
    Solved!
    Go to Solution.

    Hello Brownheart,
    Drivers for box instruments are not meant to cover all applications of an instruments use, only the most common uses. Regardless of discussing whether multitone is a common use for this instrument, a cursory examination of the available functions in the driver does not reveal this functionality.
    What you will have to do is create your own config VI using the information from the programming manual of the device. Not ideal, but at least the provided NI driver gives you a starting point from which to add this functionality.
    Regards,
    Dan King

  • I am looking for driver instrument for Agilent 35670A Analyzer.

    I am looking for driver instrument for Agilent 35670A Analyzer (for LabWindows/CVI). Where can I find it?

    Hello Kris1,
    We have a LabVIEW driver for the 35670A on our website, but not a CVI driver. There is, however, a CVI driver for a 3561A (another HP Dynamic Signal Analyzer). The command sets should be similar and so you should be able to modify the 3561A's driver to work with the 35670A.
    HP3561A Dynamic Signal Analyzer
    Otherwise, http://www.ni.com/devzone/idnet/other.htm states a few options to obtaining a driver. Drivers are developed based on demand and p
    opularity so the more requests, the greater the possibility that one will be developed. It would also be beneficial to notify the instrument manufacturer.
    Regards,
    Ray K
    NI Applications Engineer

  • Instrument driver for agilent 8960 to run CDMA tests

    Hi, just wonder if there is an instrument driver for agilent 8960 to run CDMA tests? I know 8960 has E1963 and E1968 driver, but 1963 is designed for W-CDMA and 1968 is for GSM/GPRS/EGPRS. So is there a driver designed for CDMA mode? Thanks a lot!
    Solved!
    Go to Solution.

    Unfortunately, it does not appear that there currently is one.  When I search the Instrument Driver Network I only find the two drivers that you pointed out.
    Brandon Treece
    Applications Engineer
    National Instruments

  • Drivers for Agilent 6811B

     Hello
     I need a drivers for Agilent 6811B AC source/ Power Analyzer, but I using a LabVIEW 7.1 and I only find a drivers for LV 8 or higher at http://sine.ni.com/apps/utf8/niid_web_display.down​load_page?p_id_guid=493228DD99AA697EE0440003BA7CCD​...
     Does this drivers exists and anybody knows how to find it?
     Thanks!

     Hi Tomasz
    I can see that you have asked this question also on www.labview.pl (polish forum) - http://www.labview.pl/ForumsPro/viewtopic/t=2328.h​tml
    The answer you got there is correct, but if someone needs this information for the future, I'll translate it into english:
    If they're not on the website, you can do 2 things:
    - open the 8.0 and save them for previous version. With some luck they'll be working fine. If not, then you can use those drivers as a sample how to write your own drivers, since they are using generic VISA drivers
    - download CVI drivers, create a dll and call it in LV 
    Let me know if it works
    Best regards
    Best regards,
    Maciej Antonik
    National Instruments Poland

  • Smart URLS for Agile 9.3.1

    Hi
    I am trying to get the smart url for doc attached to item. I reviewed the SDK documentation. However in 9.3.1 there is no getshortcut menu.
    Also i would like to arrive at the URL by the following method, which the sdk says its possible.
    http://server/Agile/viewer/file/objectname/...etc
    I do not want the GetShortcut link as the URL is going to be generated.
    Anyone have any experience with this?
    thanks

    I would like to do the same to be able to access a parts Manufacturer page from another tool so that all the manyfacturers specs. can be accessed. Doesn't make sense to download all the specs when they are in Agile. The actions->copy URL to clipboard works but it's manual. The SDK says there is a simple URL that follows a standard format but it ends there. It would be nice to find it as a search category or generate it from a common path.

  • Found driver for Agilent E3633A but it is for V6.0 LabWindows. Is it ok for V8.5.1?

    I have a Agilent E3633A power supply that I am trying to communicate with on GPIB. I have a Agilent 82357B USB/GPIB that connects my PC to the power supply. I am having trouble talking to the power supply. I saw some posts on the subject and saw there is a driver for the E3633A. I downloaded it. The download page said this was for LabWindows V6.0. Will it be ok to install it for LabWindows V8.5?
    I am also looking for some code examples that use the Agilent 82357B USB/GPIB to communicate with instruments. Have not used GPIB on LabWindows before so I am struggling a bit. Any suggestions are appreciated.
    thanks in advance,
    Don Pearce

    The power supply driver is probably fine, especially if you have the source code with it.
    If it is a VISA driver, you will need the version of VISA that is compatible with your interface. In this case, with your Agilent interface. I personally have no experience with that equipment as I have always used NI GPIB interfaces and NI-VISA to keep things simple.
    You may need to contact Agilent technical support for the interface issues.
    Martin Fredrickson
    Test Engineer
    Northrop Grumman
    Advanced Systems and Products
    San Diego, CA 92128

Maybe you are looking for

  • Creating a web service to consume price of a particular stock from ???

    hey, i'm new, donno much about web services in terms of writing it, but i do have some knowledge about wat it actually does... im here becuz i wanna create a web service to consume the price of a particular stock and then store the closing price alon

  • Accounts Verification Center Nightmare. Service Suspended. No Explanation. HELP.

    Yesterday, 9/26, at around 12pm I was trying to access my account to pay my Verizon bill for my internet and TV service. Through multiple attempts I was getting the prompt that my account could not be accessed and so I called technical support and wa

  • IOS 6.0.1 funky update ?

    i just did the 6.0.1 on an ipad2 and it just keeps rebooting after about a minute. tried reset on various parameters, no change in fact added some flickering to the routine. tried to initiate a factory restore via itunes usb on an iMac and every time

  • Power Mac G4 Shuts down at start up

    Hello, I have a power mac g4 that Shuts down at start up. It will get to the white screen with the apple for about a minute and then shut itself down. I tried starting up from a disk and it doesn't even get that far.I haven't replaced any parts yet b

  • Unable to Extend Vo

    Hi all , I am trying to extend VO in R12 for that i am getting bellow error Each row in the Query Result Column must be mapped to a unique Query Attribute in the Mapped Entity column. I am not even modified the Base Vo just trying to extend base VO (