Vibration on samsung galaxy 5 is very weak - even on high.

I just upgraded to galaxy 5 from galaxy 3.  The vibration on the 3 was good and strong.  The 5's vibration mode is VERY weak.  Does anyone know of a way to increase it?
Thanks

Have you checked your settings.? Look in Settings >>  Volume there should be some options to choose from in there I'll add in my post a Link to the Online Manual
Follow this Link for the online Manual for the s5
Samsung Galaxy S® 5 16GB in Black Support | Verizon Wireless

Similar Messages

  • HT204409 Have brand new iphone 4s. Wifi signal is very weak even when very close to router. I have also an iPod Touch and when both are side by side, the iPod wifi signal is excellent and the iPhone wifi signal is very poor??!!! Hardware issue? or softwar

    Have brand new iphone 4s. Wifi signal is very weak even when very close to router. I have also an iPod Touch and when both are side by side, the iPod wifi signal is excellent and the iPhone wifi signal is very poor??!!! Hardware issue? or software issue? I was hoping it is just a software issue, but...
    Saw may web sites discussing this same issue; many discussions point to hardware problems but there is no official word from Apple about it, which is disapointing !??  Few discussions point to software problem with solutions based on try and error, and they don't seem to work.

    did not help at all; the problem continues the same

  • HT201269 how do I transfer all my data from IOS5 iphone on to my new Droid device( Samsung Galaxy S Fascinate)Don't even ask..Lol.. not my choice. iphone was my old company phone)  :0

    Hello, I have a (Company owned) iPhone 4 with upgraded IOS5 installed. I have 345 pics , several videos, notes, contacts, and my favorite songs(68 of them) in there. I must return the phone to my former employer. I have purchased  a new phone with an SD card capable of 8GB external storage. I also purchased an 8GB flash/thmb drive per advice of the Verizon retail store that stated they can only transfer pics/contacts and failed to even do that after a 2 hour wait. so, how do I transfer my data from old iphone to new Gallaxy S Fascinate? Please!   Thanks much... Deano

    You can import photos to the computer http://support.apple.com/kb/HT4083. Contacts and calendar can be synced to the computer as well to a supported application. How to transfer them from there is something I don't know, unless the new device supports getting contacts from those programs. You can also sync your calendar and contacts to gmail and then you would be able to sync them to the Droid that way. songs are in iTunes and are saved on your computer if you have them added there. However they could be in AAC version which would mean you would have to convert them for the Droid. You might want to go to an Android forum, they may have information there about how to do it, since many Apple owners have switched to Android.

  • My iphone 4 wifi range is very weak even i'm near router. I can't depart the router for 3 feets away. How can I solve this ? Is't concern with hardware or other ? iPhone 4, iOS 6.1.3

    poor wifi bar as m standing near to an router !!

    Power cycle the router.
    Settings > General > Reset > Reset Network Settings
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • I have version 4.1.2 and recorded a lead guitar track (live classical guitar) using the acoustic guitar echoes (flange enabled). Now, when I burn a CD, the guitar track is very weak. Any clues?

    I have version 4.1.2 and have been doing great rercording for several years. I use only real instruments. This week I added "acoustic guitar echoes" to my classical guitar, and that enabled the "flanger" setting which is what I wanted. Mysteriously, every time I burn a test CD, that lead guitar track is very weak, even though the recording level is quite high. Nothing I have done has helped the mix. Does anyone know why this is happening and what I can do to circumvent it? I've tried burning straight from GB to a CD and also via Itunes; it doesn't make any difference. Thanks.

    P.S. I usually record my classical guitar on the "vocal" and "live performance" settings, using my Blue YETI mic, set on stereo. I get great recordings which always transfer perfectly to my CDs. I'm puzzled why adding the acoustic guitar echoes would be failing in the burn process. Hope this clarifies.

  • Loss of audio sync when importing Samsung Galaxy 2 (GT-I1900) video to Premier Elements 10

    I am loosing audio sync when I import video from a Samsung Galaxy 2 GT-I1900 phone even when using settings chosen by Premier Elements 10. 
    The file plays OK in Windows 7 media player.
    I have tried using both direct import from the phone and transferring the file separately without solving the problem.
    The Premier Elements is version 10.0(20110902.Mol11.B123.280463)
    Unlinking the audio and video makes no difference.
    VideoReDo reports the file as :
    File:                                     Name : C:\dcim from samsung\DCIM\Camera\20121121_114639.mp4
                                               Size : 0.886 GB
                                           Duration : 00:09:45.22
                                           Mux type : MP4
    Video:                                Encoding : H.264
                                      VideoStreamID : x201
                                         Frame rate : 29.91 fps
                                      Encoding size : 1280 x 720
                                       Aspect ratio : 16:9
                                    Header bit rate : 20.000 Mbps
                                         VBV buffer : 380 KBytes
                                            Profile : Baseline/4.0
                                        Progressive :  Progressive
                                             Chroma : 4:2:0
                                       Entropy mode : CABAC
                                           Bit rate : 11.626 Mbps
    Audio Stream: 1 (Primary)                Codec : AAC
                                             Format : ADTS
                                           Channels : 2.0
                                           Language : eng
                                                PID : x202
                                      PES Stream Id : xC0
                                      Sampling rate : 48000
    Letting VideoReDo simply rewrite the file resulted in loss of all but the first few seconds of audio. 
    Elements seems to have imported the file as NTSC-AVCHD-AVCHD LITE 720p 30fps
    The computer is running Windows 7 Professional  64 bit version  Service Pack 1 kernel 6.1.7601.17944 (reported by SIW)
    The computer motherboard is a Gigabyte Z68x-UD3H-B3 with an Intel Core i5-2500 CPU at 3.30GHz. Memory is 4GB.
    I note that others have had similar problems with non video recorder recordings.
    Can you suggest any file conversion of the original that will work – I have tried several with no improvement in the final result.
    And can anyone shed light on what is the basic cause of these problems?

    According to the Adobe installation information the trial version of Premiere Elements 11 is fully functional and the watermark is only present until a licence code is purchased.
    I have edited AVI footage from a camcorder using the program with no problems (and no loss of audio sync) and the watermark is also present with this.
    The odd placement of audio and video was caused by my not dragging the clip carefully enough.
    What is odd is that the clip plays completely normally using WIndows Media Player and VLC Media player so I would expect Premiere Elements to be able to handle it without problems.
    I think that there is some sort of bug in Premiere Elements' handling of mpe4 files (both in versions 10 and 11) rather than there being anything wrong with my computer.
    Is there some way of communicating this directly to the Adobe programers ?
    I enclose screenshots of the project settings:

  • Very loud, but very weak vibration motor [Xperia Z1]

    Hi,
    I've bought new Sony Xperia Z1 a few days ago and overall it's a great device, but there is one issue, which is very annoying for me. 
    The vibration motor is very loud, but at the same time vibrations are just weak, so that when the ringtone is set on the lowest level, the motor is louder than this ringtone and when I keep the phone in my pocket I can hardly feel anything when it's vibrating. 
    In the keyboard I've set the shortest possible vibrating time, but it still makes more sound than vibrations. 
    The pitch of the sound is increasing with the duration of the motor working: eg. when I push home button for one time, the sound is quite low (but still loud), but when I press a few times in a row the sound gets higher and even more irritating.
    Is it normal behavior for this smartphone? It's very annoying, because vibration should be discrete way to notify me about incoming calls or text messages. The fact that it is louder than a normal ringtone makes it useless. 
    Is it possible to fix it via software or is it a hardware issue and I should send the phone to the repair center.

    I have the exact same issue.  When the phone is in my holster and vibrates to remind me of a meeting, I can hear the vibrate but not really feel it.  I had a Samsung Galaxy S3 before this and I could feel the vibration all the time and not really feel it.
    This is really a huge downer for it.

  • IPhone 6 vibrate intensity is very very weak compared to previous generation iPhones.

    Got iPhone 6 on 9/19. Found out that Vibrate intensity is very very weak on iPhone 6 compared to previous generation iPhones. I keep missing calls and alerts when on vibrate mode. Is there any solution to this ?

    Yes. There are reasons why I want to keep it in vibrate instead of ringtone. At my work, I keep it in vibrate so that no one gets disturbed if I get a call or text. Specially in a meeting, I must put it in vibrate. When I have the phone kept on my desk in vibrate mode, I miss text or calls most of the time now. It never used to happen with my old iPhone 4s.
    Also, I use my phone as a pager for my work and I want to keep it in vibrate in the night so that only I get up in the middle of the night when I get a page. I don't want to disturb others at home. I've been missing the pages now because the vibration is very mild and I don't hear even hear it. Again, I never used to miss the pages before on my iPhone 4s.

  • My iphone 4 Carrier signal is very weak just shows one bar and often shows No Service followed by searching and again one signal bar I have had a lot of drop calls, I have tested the sim card on my Samsung Ace which shows full Signal strength I am on the

    My iphone 4 Carrier signal is very weak just shows one bar and often shows No Service followed by searching and again one signal bar I have had a lot of drop calls, I have tested the sim card on my Samsung Ace which shows full Signal strength I am on the latest iphone firmware 5.1.1 with 4.12.01 baseband I have tried resetting the iphone did o full restore twice. I guess there is something wrong with the iphone hardware? Has anyone had similar issues and how they fixed it?

    Take the device to Apple or an Apple authorized service center and let them check it out.

  • The vibration on 4S  is VERY weak.

    The vibration on my 4s is very very weak. I can't even tell it vibrates. It's been that way since I bought the phone from AT&T. I thought it was normal until I started feeling other people's 4s. What can I do? I bought the phone around November last year.

    Test your iPad on some other networks to see if the problem is with the iPad or your Airport Extreme.
    If the problem is with the iPad you will likely have to talk to Apple support since this is likely a hardware problem (disconnected antenna, etc).
    You could try using Settings > General > Reset > Reset network settings to see if that helps.

  • Very weak vibration

    Hi,
    New to this forum and just got the Tour . I really like this phone except of the weak vibration. I can hardly tell when its vibrating. Some say their vibration is very strong while others have a very weak one like i do. Im always on vibrate and pocket the phone alot and its causing me to miss calls and messages.Im wondering if there is a fix or return it for a new one since im still on a replacement period. Also my signal keeps jumping from 4-5 bars to 1-2 bars all the time but i suspect an os upgrade could fix that unless im wrong. Wondering if anyone can tell me if there is a solution to the weak vibration on this phone.
    Thank You, G

    I have the same problem with the signal strength bouncing all over the place, and the vibration being very weak.  I'm confident that future OS's will address the signal issue, but I doubt much can be done about the vibration unfortunately

  • Samsung Galaxy Nexus Android 4.2 Update

    When will Verizon approve the Android 4.2 update for the Samsung Galaxy Nexus?  The slowness of Verizon to approve updates is inexcusable!  And to that I'll say, "I'm done!"  I am so disgusted with Verizon and their inability to provide updates to what is supposed to be a "Nexus" device.  It's not like they have to manipulate around manufacturer software.  It's pure Google operating system.  Load and test the drivers for CDMA and LTE and then launch the update.  At the MOST that should take no more than 2 weeks!  Since I have had my Nexus on Verizon, I have not recieved a single update prior to 2 months!  Android 4.2 update from Android 4.1 is so miniscule and, might I add, required no additional new drivers, so what is the hold up Verizon?  Where is the Android 4.2 update?  And, yeah, I know some techy out there is going to say, " well why don't you just jailbreak and load it yourself?"  Because I shouldn't HAVE to jailbreak my phone.  It's not a matter of can I do it, it's why can't I do it without jailbreaking from Verizon?  They sold this phone initially by claiming it to be a "pure Nexus" device and it's been nothing of the kind ever since!  So I say, "I'm done!"  That means that when my contract is up, I'm return to AT&T!  They have upgraded the towers in the area that I live and my friends on AT&T say their signals are even better than Verizon's.  AT&T's new LTE towers download at faster speeds than Verizon's too.  I would have happily stayed with Verizon if they would have only taken the Pure Nexus experience seriously!
    To those who have stated that I've said this for Jelly Bean 4.1, you are correct!  The only reason I'm still here is because of the hefty penalty Verizon will charge me for terminating my contract early.  My contract doesn't expire until December 2013 so it would be a rather hefty penalty to pay.  But Android 4.2 has confirmed that Verizon refuses to change their position on slow updates, so when my contract is up (as I believe I stated on 4.1), you won't see REDNIBKRAM on Verizon anymore! 
    It appears as though the Verizon "love freaks" just can't seem to get the message.  I'm not saying that the updates aren't difficult, I'm saying that if Verizon chooses to use CDMA technology over GSM and that requires them to jump through hoops to get updates completed, then they should have NEVER agreed to carry a "pure Nexus" device, or at the very least, should have NEVER advertised the device as such.  My whole point is that Verizon LIED TO ME and told me that my phone was a "pure Nexus" device when I purchased it and switched from a GSM phone company (AT&T) when, in fact, they knew that I would NOT be getting updates directly from Google as the GSM versions of the SGN do.  At the very least, if Verizon really wanted to make this right, they would offer to allow anyone with a SGN phone who was lied to when they purchased it to exit from their existing contract without penalty, so we can purchase a "TRUELY PURE NEXUS" phone direct from Google or provide us with a choice of another phone (Windows Phone, iPhone, etc.) without having to renew a 2 year contract. 
    All I'm saying is that if Verizon won't or can't update the phones they themselves advertised as a "pure Nexus" phone, then they should make it right to the people they lied to.

    I didn't go back to AT&T for JB in August because the of VERY HEFTY penalty I will have to pay for cancelling my contract early and I got the Android 4.1 JB update.  Once I received the update and because the the penalty, I decided to give BIGRED another change at the next update.  I thought, "maybe it was such a huge update that they really needed to make sure everything was done right."  So, now here we are waiting for the 4.2.1 update and I'm still getting the same response from BIGRED as I got for JB 4.0 update.  It's quite clear that VZ DOESN'T CARE about customer satisfaction.  They use the excuse that they want their network to be the best and they want their phones to operate with little or no problems, yet when problems ARE discovered, it takes them months to send out the updates that Google has already released months prior.  I have discussed updates with Verizon, Google and Samsung support personnel.  I have even contacted Verizon Corporate and I fully understand the process by which updates are done, and believe me when I say that the update process at VZ is in serious need of restructuring.  Especially when it comes to Android devices.  But as far as this Android 4.2.1 update is concerned, I have spoken with Google and they have informed me that there was NO changes made to the operating system that would affect the CDMA or LTE drivers on the Verizon Samsung Galaxy Nexus, so there should be no reason why Verizon would not want to release the update.  The small changes (additions) to the operating system would in no way affect the communications on VZ.  So why hasn't VZ released this update yet.  Corporate says they need to test the software to ensure it doesn't affect communications on their network, yet Google hasn't changed anything in the operating system that would, so what are they testing?  VZ may have the better network, but CARRIER EXPERIENCE ISN'T ALL ABOUT THE BEST CONNECTION.  It's about customer SATISFACTION and not receiving updates on a pure NEXUS device in a timely manner is inexcusable and in NO WAY SATISFYING!  So when my contract is up, I will be returning to AT&T or giving T-Mobile a try on a pure Nexus device with no contract!

  • Cisco Jabber for Android on a Samsung Galaxy Xcover (GT-S5690)

    Hello there,
    Yesterday we installed the Cisco Jabber client for Android on the Samsung Galaxy Xcover (GT-S5690) phone.
    First we had some issue's with one-way voice, but suddenly this problem was occured.
    Another problem, which is still there, is when you wants to check your compagny Voicemail (Unity) with the Cisco Jabber client.
    We can access the Voicemail system (Unity), the we must fill-in the pincode followed by hash.
    As you can see in the attached file, this can't be done.
    Samsung Galaxy xCover (GT-S5690)
    Samsung Galaxy S2
    The reason is the screen size of the display of the difference of the phones.
    Hopefully can this small issue be fixed. Our customer ordered 150x Samsung Galaxy XCOVER (GT-S5690) for working with Cisco Callmanager.
    Technical Information:
    Cisco Callmanager version 8.6.20000
    Samsung Galaxy XCover (GT-S5690)
    Android version: 2.3.6
    If someone knows a solution of can support me, please let me kwon!
    Kind regards,
    Edgar Verbaten
    Elkor Telecom & ICT
    [email protected]

    Hi Edgar
    How does this phone work with the Jabber ?
    I have a customer which about a dozen of these phones and it only vibrates on incoming calls but doesn't ring.
    Same Android version : 2.3.6 -
    Regards
    Andri

  • Verizon Customer Service and Samsung Galaxy S III

    A little over 3 weeks ago I purchased a Samsung Galaxy III phone from Verizon.
    The exact store is:
    224 North Weber Road,
    Bolingbrook, IL 60440
    (630) 226-4660
    When I purchased the phone the person who sold me the phone told me that I had 30 days, If I was not completely satisfied with the phone I could return it and get my money back.  However, he assured me that I would LOVE my new phone.
    I had just come off using a Blackberry for 4 years with no problems AT ALL!  I loved that phone, but I thought it would be nice to get up to the 21st century phone standards and get a touch screen phone.  Well, I went for the best…… or so I thought.
    As soon as I got my new phone in the car, I started using the speaker phone hands free.  The speakerphone began to cut in and out and the person, my husband whom I most speak with could not understand what I was saying.  I used the speakerphone on my Blackberry without issue.  I did not think much of it because I was so happy to have my new phone.  I thought maybe I was just in a bad area etc… Well the issue persisted also when I called my bank, my husband’s mother, my mother and it did not matter where I was the speaker phone did not work properly.  Then my phone started to drop calls.  Again, I thought it may have been the area, but it started happening a lot.  So now I was really beginning to wonder.  Having though I was still under the 30 DAY warranty, I gave it a few more days.  I began having to take out the battery to reset the unit because apps where disappearing and when I went to re-install them the unit indicated that app was already on my phone and wanted to know if I would like to uninstall the app.  I had to once again take out the battery and have the unit restart.  Well, I could not take it anymore.  With all of the things going wrong only a couple of weeks after purchase, I had to go into the store and see what they could do for me.  I went in and explained my situation to the manger who was greeting people at the door, I think her name was Katie or something like that.  She put me in line on her IPad just like everyone else for someone to assist me.  I was assigned to a very pleasant associate who took the battery out of my phone and said try this to see if this works for you.  I, not knowing very much about the technology said ok and walked out of the store.  Well it kept on getting worse.  I went back to the store on Sunday, September 30th 2012 asking for my money back or a new replacement for the phone.   They would not assist me. I started with a regular associate and went up the chain finally getting Katie (the store manager) who repeated everything that everyone else said.  So, obviously, she has no managerial skills at all.   She stated that they would have to totally reset my phone to see if some apps where conflicting etc.  Isn’t that what you purchase a Smartphone for??? To put apps on it and calendars etc.  I just downloaded a calendar and Xfinity because that is what I have my e-mail on.  I don’t’ think that was the issue, but you could not tell Katie anything. 
    I wanted a new phone replacement or money back as I spent $300.00 dollars on this phone.  She would not have it.  She said we have to go through the proper trouble shooting because I was out of the 14 day return policy!!!!.   OMGsh 14 days????  I was told 30!  Had I known this, I would have gotten my money back the first time I took the phone in for the issues I was having.  At that time, I was still under the 14 day policy!  I proceeded to express my opinion to everyone in the store stating “Don’t buy a Samsung Galaxy III” They are pieces of **bleep**. Well, needless to say Katie did not like that and she set my phone down in front of me and said, if I am going to swear, she is not going to help me.  Ok, then I re-worded my statement to tell everyone in the store “Don’t buy a Samsung Galaxy III they are pieces of garbage”  I cleaned it up a little, but still got my point across.  I also told her that I would blog about it and send a letter to the corporate office of both Samsung and Verizon.  I don’t think that she believed me, but here I am taking my time for this stuff.  Time I don’t have much of, but I feel very strongly about this situation.  I was lied to and Katie had the nerve to tell me that if I get a replacement phone from them, it would be a refurbished unit even though I just purchased the unit 3 weeks earlier.  THAT is unacceptable by any standards!!! 
    Needless to say I left the store totally dissatisfied with Verizon’s customer service and the Samsung Galaxy III phone.  I have not put any unusual apps on my phone nor have I downloaded a new calendar to my phone and I am still having the same issues with dropped calls and bad speaker phone.  I will not put any time into this phone for them to tell me they need to reset the whole darn thing again!  I am not going to bother going back to that Verizon store, because I know that they will not lift a finger to do anything about it.
    My husband wants an IPhone 5.  We will not be purchasing this from Verizon and I will probably eat the cancellation fee and go through AT&T so that my husband can get his IPhone.  I will never purchase another thing from Verizon, this is not the first time that that they have let me down.
    I hope that this letter, blog, facebook, YouTube note will open some eyes with regard to Verizon customer service and the Samsung Galaxy III phone.  I don’t know if it will, but with social media as it is, I hope it DOES!
    Thanks for nothing Verizon!!!
    Sincerely
    Donna {edited for privacy}

    These forums are dedicated to Residential products and services offered by Verizon.
    For help on Verizon Wireless issues, please post your topic on the
    Verizon Wireless community.

  • Verizon...When will you ship out the Samsung Galaxy S3?

    I'm one of the millions who pre-ordered the Samsung Galaxy S3. I ordered it the first day it was available (June 6th 2012). Now I'm usually very patient, but this whole Release Date issue is starting to frustrate me...and I'm sure I'm not the only one who feels this way. Every other major US carrier is also selling the Samsung Galaxy S3, and have issued release dates for it. Most of them are from June 18th to June 21st. Verizon, when are you going to tell us the release date? On all the pre-orders, it says "Will ship on or by July 10th". Doesn't it seem a little ridiculous to offer pre-orders on such a popular phone, that you're not even gonna release for over a month? That seems almost misleading to me. Now I know Verizon doesn't care about their customers, and doesn't ever listen to them...but would it be too much to ask if we could just find out when the SG3 will be released?

    jerznaut13 wrote:
    I'm one of the millions who pre-ordered the Samsung Galaxy S3. I ordered it the first day it was available (June 6th 2012). Now I'm usually very patient, but this whole Release Date issue is starting to frustrate me...and I'm sure I'm not the only one who feels this way. Every other major US carrier is also selling the Samsung Galaxy S3, and have issued release dates for it. Most of them are from June 18th to June 21st. Verizon, when are you going to tell us the release date? On all the pre-orders, it says "Will ship on or by July 10th". Doesn't it seem a little ridiculous to offer pre-orders on such a popular phone, that you're not even gonna release for over a month? That seems almost misleading to me. Now I know Verizon doesn't care about their customers, and doesn't ever listen to them...but would it be too much to ask if we could just find out when the SG3 will be released?
    One would assume around that time...
    Also other carriers have it marked like that as well...
    So............
    You could always cancel your preorder and get it from somewhere else.  You had a choice to preorder it without knowing the date...  It was pretty "ridiculous" of you to do so without knowing when it would be released.  A LOGICAL person would wait for a hard date before making any orders.

Maybe you are looking for

  • File to File interface Count

    HI ALL, I have a file to file scenario used to move 100 PDF files from System A to B . i give wildcard * in the sender communication and used ASMA to name the file in the receiver side. the requirment is client is asking to send a e-mail aftre sendin

  • Template-based ssi causing problems

    I'm working on a small site that has a sidebar listing news features, which the client needs to edit.  The sidebar list appears throughout the site so I set it up as an SSI in the base template.  The editable items in the sidebar are repeating elemen

  • How to pass pushbutton values to a function module

    Hi all, I am required  to move a subroutine in main program to a function module but I am unable to pass in the pushbutton . How do I do that? In main program: SELECTION-SCREEN BEGIN OF BLOCK blk1. PARAMETERS message(10) TYPE c. SELECTION-SCREEN SKIP

  • Mountain lion install disk

    i want to make a mountain lion installer disc on a 16gb flash drive for my new macbook air with 10.8.4 already on it (as anybody would), but when i try to option-click the buy button at the app store it says "we could not complete your purchase osx m

  • How to paginate in content presenter?

    How to paginate in content presenter? I could ony put Maximum Results parameter but StartRow as in RIDC. http://img59.imageshack.us/img59/8104/contentpresenter.png Thanks, Edited by: lpbac on 18:41 28-02-2012