Video drivers on start-up

Hi,
So on start-up, it says the error message about how the drivers are out of date.
This only started happening because I had to do a system recovery to a week ago.
I've tried running as administrator, updating my graphics by manually installing updates.
It looks like switching from switchable graphics to fixed is my best option, but I don't have a clue how to do that. I'm running a Compaq CQ58 laptop, with Windows 8.1, intel(R) HD graphics 3000.

Hi DCleary,
This is typically caused by installing incorrect GPU drivers or that your firewall is blocking certain components of Premiere Pro (or both). Review the following:
You can find the correct driver here: Intel® Download Center
Go to your firewall software and allow the Adobe Premiere Pro.exe file, the GPUSniffer.exe file and dynamicklinkmanager.exe files through your firewall.
Try one of the solutions in this KB doc: Error "Premiere Pro could not find any capable video play modules" | Startup
See if one of these suggestions help you solve this issue.
Thanks,
Kevin

Similar Messages

Adobe premiere can not find any module capable of playing video. Update the video drivers and start again.

Adobe Premiere can not find any module capable of playing video. Update the video drivers and start again.
I've tried all the options suggested and the problem continues.
What else can I do?
Note: I had already worked before.
Windows 8.1
Notebook i7, 8M memory, video card Nvidia (updated).
Adobe Premiere Pro 2014
Please help me. Thank you.
mailto: [email protected]

Here is a link to an Adobe TechNote about the same issue with an earlier (much earlier!) version of Premiere Elements and Windows XP.
http://kb2.adobe.com/cps/324/324938.html
I'll leave it to Steve and Bill as to whether the fix offered in the link for Premiere Elements 2 would still be applicable to your version of Premiere Elements.
Hope this is of some assistance.

Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!

Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay

Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
Thanks

Hi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck

Adobe premiere pro could not find any capable video play modules. Please update your display drivers and start again.

this message keeps poping up and i dont know what to do i already updated the drivers but its dint work what do i do

I am having the same problem, just out of the blue. Earlier this week Premiere worked fine, today it stopped in start-up while loading windows media and displayed this message.
I did not change my video drivers, neither to an earlier version nor a newer version. I remember an update for AME got installed automatically, though.
After a restart of my computer PP worked, closed it and restarted PP. Got the above error. Now even after a restart of the computer PP gives me the error messages.
AE starts fine, by the way.
- Version is CS4 Production Premium
- Language is English
- Update 4.0.1 applied for PP.
- Project setting etc. are of no use. It happens before I can even start a project.
- OS XP-32bits
- SP-3 applied
- language Dutch
- Automatic updates disabled. Did some updating microsoft released latest updates. Removed the one for IE7 as it disturbed browsing (with firefox, which is very particular)
CPU = Q6600 2,63 GHz
4GB memory
Videocard = Gigabyte 9600 GTS silent pipe 3
Audio is realtekHD onboard of gigabyte motherboard
Used Harddrives are not nearly halfway full.
No other capture hardeware than a IEEE1394 onboard.

Video drivers for CQ1505LA (windows 7 starter)

Hello,
Can anyone please submit a link to download the video drivers (windows 7) for a CQ1505LA PC. The drivers in the HP website point to an AMD video driver, but this motherboard uses an integrated Intel video graphic chip.
Thanks in advance.
Regards,
Alex

Please download and install the video driver from the following weblink:
http://downloadmirror.intel.com/21138/a08/GFX_Vista_Win7_32_8.14.8.1077_PV.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Tecra M3 video drivers causing crashes

My Toshiba Tecra M3 is crashing (freezing or blue screen of death) with drivers 71.14, 71.36, and 76.44. It uses an NVIDIA GeForce Go 6600 TE 128M. When I uninstall all video drivers (or boot into safe mode), the laptop runs fine, although of course scrolling is deadly slow and I can't suspend or hibernate. But when I install either of the two WHQL certified drivers from Toshiba's site, 71.44 or 71.36, I can consistently create a crash just by running a 3D screensaver for more than 3 minutes. The same thing happens with the 76.44 non-WHQL driver from laptopvideo2go.com.
Sorry if this is not the best thread to post on, but I would desperately appreciate any help you can offer on what driver might work reliably. At this point, I'm not at all interested in great graphics performance; I just want a stable laptop to do some work on. Is there perhaps some setting within the driver to turn off whatever fancy features are causing the crash?
The laptop has a 2.13 GHz Pentium M and 2 GB of RAM. It's running WinXP SP2 with all updates and is using BIOS 1.20, the latest. And I doubt it's a related, but here's a different problem I ran into with the VPN, Wi-Fi, and Matlab.
Thanks in advance for any help you can provide.
[Edited by: admin]

Hi danhkon
I suppose that your notebook worked properly at the beginning. Can you maybe remember since when the unit started to make these troubles to you? It is not easy to give you a proper opinion or any kind of solution because every problem is caused by some reason.
First of all I want to say that you should use just display driver given by Toshiba and not some driver that you found on the net. The drivers that you got on Tools & utilities CD or drivers that you can find on Toshiba site are all tested and they should work properly. As far as I know Tecra M3 is a new model and also delivered with SP2. That means that all drivers are also tested to work properly with SP2.
Before you spend lot of times searching the right solution you should, in my opinion, save your data and reinstall OS using Recovery CD. On this way you will have a stable laptop to do some work on it. If there is no second partition you can make it for data saving using expert mode installation.

Windows XP hangs on 'spash' screen after video drivers installed on K8N Neo4-F

Hiya folks - got a MASSIVE post for everyone here... Sorry but I think it's necessary... Here goes:
I just upgraded everything in my computer except for the HDD. New case, power supply, etc. I started by copying all important data from my original HDD to a portable USB 2.0 drive. My data is safe, and intact on that drive. So... I formated and repartitioned the oroginal hard drive (1 partition), assembled the system and everything runs perfectly. The problems come later....
The Windows installation is insanely fast and smooth... and the system boots into Windows with no problems after installation is complete. I didn't even need to install the nVidia RAID drivers because windows detects my single SATA drive fine. The First thing I do upon seeing the desktop for the first time is: Install nVidia chipset drivers, then AMD Athlon 64 driver (both latest releases). I then restart and the system boots fine. After Windows starts, I'm asked for display drivers. I click 'cancel', as specified in my ATI installation guide, open up the ATI CD and install the drivers via the ATI autorun setup. At this point, there are no further drivers for me to install and NONE of them have an "!" near them. So I figure everything is A-Okay and restart... BAM!! - Windows hangs on the splash screen. The blue bar moves for about 10 minutes, then stops for 2, then moves for 2, and so on... This will go on FOREVER.
So... I boot into safe mode and uninstall the ATI software/drivers with the help of some other third-party programs, schedule a disk check with CHKDSK and reboot. I startup in Directory Services mode to allow the disk check to complete. No errors and the system restarts on its own (supposed to). Now the system boots in normal mode again, but no video drivers installed. So I download the latest drivers from the ATI website and install them. I restart, and WHAM! -- same problem. At this point I'm thinking "bad video card" so again I go into safe mode, remove drivers, schedule disk check, etc.... restart in Dir Serv mode... "one or more errors found" this time... but that's okay.
After the auto-restart I shut down the computer and unplugged EVERYTHING but the video card, HDD and one stick of RAM... then reset the CMOS, checked battery and PSU outputs (all fine) I then went back into the BIOS to ensure everything is set to 'as safe as possible' and restarted. Again I tried the latest drivers, and again the same problem after restart. So I then booted into safe mode, but left the drivers intactthis time. I scheduled another disk check and restarted again in Dir Serv mode. After system restart I shut the computer down and switched to my other RAM stick and booted... same problem. now I'm DEFINITELY thinking "bad video card" so I plug everything back in the way it's supposed to be, reset CMOS and restart with the Windows CD the drive. I again format the HDD, etc... and install Windows.
Now, with another fresh Windows install, having read multiple tech articles, I thought this could be an issue with the NV SW IDE drivers, so I installed the driver pack minus that driver. I restarted and the system boots fine. Next, I again tried installing the latest ATI drivers, restart, and SLAMMO! -- again the system hangs on the splash screen. So, rather than waste my time with disk checks, etc... I did ANOTHER clean OS install. This time I decided to try installing video drivers BEFORE the chipset drivers... no such luck. I restart and Windows hangs in the usual spot.
NOW, I'm REALLY getting upset and can hardly contain my fists of rage that crave to desimate the computer case and all its internal componets. Time to RMA the video card. I exchange the card for the same type, thinking this will solve my problem, I drive happily home with the new card. Wouldn't you guess it... SAME PROBLEM, on ANOTHER clean OS install!!! Now I'm thinking "bad mobo"? - I don't know because it boots fine and runs fast without video drivers, but it seems to be directly linked to the video card. So... I figure "okay maybe these nForce boards don't like ATI cards"... so I return the Radeon X700 and exchange for a BFG GeForce 6600GT. Yep, you guessed it, STILL the SAME problem!!!
I 'm pretty-sure the problem has got to be with the mobo but I can't be too sure. It doesn't seem too likely because the system boots and runs fine with basic Windows VGA drivers. Also, if I were to try and boot to VGA mode after encountering this problem, that would not work at all either, in any situation, other than after removing the ATI drivers or installing windows without them initially. Right NOW, as we speak, I tried uninstalling the nvidia drivers/software via safe mode, I ran disk check, etc... but the system will no longer boot in normal mode or VGA mode even without the nvidia drivers installed. I've formated the hard drive and am ready to reinstall again if I can find a solution to this problem.
If ANYONE can help me it would be EXTREMELY APPRECIATED! I'm not a dummy when it comes to computers but this is pure MADNESS!!! I couldn't even BEGIN to fit everything else I tried into this forum. I had to sum-it-up, but I will gladly answer any questions from you 'brains' out there and will monitor this site daily. I won't ask the question and disappear never to tell of the solution I may or may not find...
Thanks in advance,
Eilios

Quote from: EdwinGF on 26-October-05, 16:01:40
Hi,
If you only have one Serial ATA Hard Disk, then you don't need the nVidia RAID Driver. This driver is only needed when you set up a Serial ATA RAID Array or a Parallel ATA RAID array. For this you must have two identical hard drives in your PC, for RAID 0 and RAID 1 arrays.
nVidia SATA RAID drivers supports RAID 0, RAID 1, RAID 0+1, and JBOD. When you install at least two Hard Drives, prepare your mainboard to use SATA RAID and
set up the RAID Array style you want to use.
Then you will need to install the nVidia RAID driver, to allow Windows to "See" and use the drives correctly. This is done by pressing the F6 Key, inserting the nVidia RAID Driver disk , and "telling Windows" where to find the driver it needs, at the very beginig of the Windows XP setup process.
However if you install a RAID driver with just one SATA Hard drive, or two SATA hard drives, (this last scenario not set to be used in an array, but as two different use drives, lets say one for OS and one for MP3 Storage), then Windows begins to load, it will load the RAID driver, but since there's no RAID Array, Windows will keep "looking" for an inexistant RAID Array, and if there's no such RAID array, this will take forever.
That's why installing nVidia RAID Driver may hang your system (which as you saw is not really hung), at the Windows Splash Screen, it is just trying to find something that doesn't exitst.
NOTE: nVidia RAID Controller, supports RAID Arrays into both, the Serial ATA channels and the Parallel ATA (IDE) channels too. But for both options, you always need to have at least two identical hard drives installed to build up and use a RAID Array, which can only be seen by the nVidia RAID Driver, for both Serial ATA hard drives and Parallel ATA (IDE) hard drives.
NOTE: JBOD stands for Just a Bunch Of Disks = In this scenario, you can combine hard drives of different brands and/or capacities into one big drive that will be seen by Windows as one drive only.
NOTE: Even if you don't have any RAID array, you must install the nVidia nForce 4 Drivers. You can just leave the nVIDIA SATA Driver check box empty.
Hope this helps
I did not have any RAID or SATA drive in my system, actually these were disabled in BIOS. I had the similar experience though. BTW, why NF4 chiset driver is very important to install if Windows XP drivers can get the job done? Look at my link in the previous post.

Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

I am currently in the process of installing the latest AMD Video Drivers for Windows 8.1 (64-bit) on a Bootcamp partition. I previously had three ATI Radeon HD2600XT Graphics cards (in CrossFire) installed in a 2008 Apple Mac Pro.
I've run into several problems with trying to remove the Radeon HD2600XT graphics cards and install the latest drivers (for the Radeon R9 290 graphics card) in Windows 8.1 (64-bit), so I am creating this to be used as tutorial for others experiencing similar problems.
1) First I created a new/clean system restore point in Windows 8.1 prior to starting this.
      Instructions can be found here: http://www.intowindows.com/how-to-create-restore-point-in-windows-8-1/
2) Second, I manually tried removing/uninstalling the AMD Software from add/remove programs in Windows 8.1 (Control Panel)
      In Computer Control Panel, select "uninstall a program"
      Select AMD Install Manager (and any Catalyst Software) and remove/uninstall the software (choose "express uninstall all AMD software").
      Be sure to uninstall the AMD Install Manager.
3) In my system, the hardware drivers for the three Radeon XT2600 graphics cards were not properly removed, and the drivers for the Radeon R9 290 were not properly installed.
4) I tried running the AMD Driver Autodetect Tool
      It stated "We were unable to find your product or OS" (and failed to download or install any drivers)
      AMD Driver Autodetect displayed the following information:
Graphics hardware: 0x1002 - 0x9588 PCIE
Operating system: Windows 8.1 64-bit
5) Since the latest software/drivers were not found with the AMD Driver Autodetect, I decided to manually download the latest Graphics card drivers from the AMD website for my graphics card and for my operating system (Windows 8.1 64-bit). I created a folder called "C:\Drivers\AMD" and downloaded the latest AMD Graphics card drivers (Catalyst Software Suite 14.9) to that folder and unzipped the AMD drivers installation file. I unzipped the file which included the following drivers/files:
      Catalyst Software Suite 14.9 includes the following files:
            AMD Display Driver ver. 14.301.1001
                          OpenCL(tm) Driver
                          Catalyst Control Center
                          HydraVision
6) I downloaded and unzipped DDU v13.5.1.3 (downloaded from 3D Guru)
    I created a folder called "C:\Drivers\DDUv13.5.1.3" and unzipped the DDU installation files to that folder
7) I ran DDU v13.5.1.3 (downloaded from 3D Guru)
      It displayed the following information:
DDU Version:13.5.1.3
GPU # 0000 Detected : ATI Radeon HD 2600 XT (Microsoft Corporation - WDDM v1.1)
GPU DeviceId : pci\ven_1002&dev_9588
Detected Driver(s) Version(s) : 8.97.10.6
INF : oem55.inf
INF Section : ati2mtag_RV630
GPU # 0001 Detected : ATI Radeon HD 2600 XT (Microsoft Corporation - WDDM v1.1)
GPU DeviceId : pci\ven_1002&dev_9588
Detected Driver(s) Version(s) : 8.97.10.6
INF : oem55.inf
INF Section : ati2mtag_RV630
GPU # 0002 Detected : AMD Radeon R9 200 Series
GPU DeviceId : pci\ven_1002&dev_67b1
Detected Driver(s) Version(s) : 13.251.9001.1001
INF : oem63.inf
INF Section : ati2mtag_Hawaii
5) Based on the output above, it seems that some extremely old drivers are currently installed (v13.251.9001.1001), and I need to remove the old drivers for the hardware above, and try to install the latest AMD drivers (v14.9)
6) I rebooted the computer into Windows 8.1 "Safe Mode".
    Instructions can be found here: http://www.7tutorials.com/5-ways-boot-safe-mode-windows-8-windows-81
7) I went to the folder called "C:\Drivers\DDUv13.5.1.3" and ran DDU v13.5.1.3 and selected "Clean and restart" (in DDU 13.5.1.3) to remove ALL of the existing AMD drivers and to restart/reboot the computer.
- After removing the current display drivers (in safe mode) with DDU v13.5.1.3 and after the system rebooted, I then tried to perform a "clean install" of the latest AMD drivers (v14.9)
8) Now perform a "Clean Install" of the new AMD graphics drivers. Steps for performing a "clean install" (from AMD's website) are listed below:
To perform a 'clean install' of AMD graphics drivers:
You should make a system restore point before attempting, just in case
1. IMPORTANT: All Windows Updates should be current, including the 'optional/suggested' updates
2. IMPORTANT: Disable all anti-virus/ad blockers/anti-malware/ anti-anything before trying to install
3. IMPORTANT: Netframework is required and must be the latest version. (from Windows Update)
Download the drivers for your computer to the desktop. Follow steps 1-5 ( http://support.amd.com/en-us/download ).
Do not use 'auto-detect and install (it might not detect your graphics card or best drivers).
Delete existing drivers from your computer:
In computer control panel select 'uninstall a program'
For computers with Intel processors:
Select AMD install manager and choose 'express uninstall all AMD software'
Including the install manager.
For computers with AMD processors:
Select AMD install manager and 'custom uninstall' the graphics drivers and CCC only.
Reboot into 'safe mode'
In safe mode run Guru 3D's DDU
Reboot
Install the new driver suite.
9) I went to the folder called "C:\Drivers\AMD\AMD-Catalyst-14-9-win7-win8.1-64Bit-dd-ccc-whql" and ran setup.exe (Catalyst Install Manager)
     I selected "Express Install" as the default installation (highly recommended).
10) Rebooted the system after the Catalyst software and video driver installation.

In the end, I found out that the latest/newest Radeon drivers do not support the older Apple Radeon 2600XT graphics cards, so I was forced to remove the older Radeon 2600XT graphics cards from the system (so the newest/latest Radeon Catalyst Drivers would work). I was then able to boot directly into Windows 8.1 Pro, and the AMD Catalyst software and AMD Catalyst Drivers worked perfectly with the R9 290 graphics card (in Windows 8.1 Pro).
The only problem is that the AMD R9 290 is not supported in OS X, and now I can't boot directly into OS X because the Apple OS X graphics card drivers are missing and don't exist. Apple hasn't added AMD R9 290 graphics card support to the latest version of Apple OS X 10.10 Yosemite (or 10.9).
I posted a thread here about needing the AMD R9 290 graphics display drivers, but Apple still hasn't added the latest AMD Radeon R9 290 graphics card drivers support to the latest Apple Mac OS X 10.10.1 Yosemite operating system.
Another big Apple fail!
So now we have a wonderful new high-end AMD R9 290 graphics card and all we can do is use our Apple Mac Pro computers as Windows 8.1 Pro computers, because Apple has not updated their Apple OS X operating system to support the newest/latest AMD R9 290 graphics cards. (So we're stuck with using our Apple Mac Pro as a Windows 8.1 Pro computer) because Apple refuses to add the newest/latest hardware drivers to their latest Apple OS X operating system. Anytime you purchase an Apple computer you are stuck using really old hardware because Apple fails to update their operating system with the newest/latest hardware drivers for the latest AMD R9 290 graphics card hardware.
The only way to use the latest/newest hardware is with a Microsoft Windows 8.1 Pro computer. Hopefully Apple will get this fixed immediately, but it's already been close to a year now and Apple still hasn't fixed the problem.
We tried to contact Sapphire, and AMD, but both of them have said that it's a problem with Apple's Mac OS X operating system, and that only Apple can fix the problem and add the proper hardware drivers to their operating system.

Pse trial v12 installed but when opening the editor it shuts down after 2 seconds, what can be the problem? I have windows 8.1 64 bit with the latest video drivers installed. Thanks

PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
I also installed premiere elements version 12 with the same problem.
What can be the problem here, please help?
Thanks.
Wim.

Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

Boot Camp - Lion / Mountain Lion latest video drivers Win 7 64-bit

I've been running Boot Camp on my late 2008 Mac Pro w/ OS X Lion and Windows 7 64-bit for some time now, no probs. Two years ago I installed the Apple version of the Nvidia GT 120 video card...has been working like a charm. Currently all latest OS updates are applied.
At issue: I'm trying to get a new plug-in for After Effects to install and it requires a more up-to-date video driver than the circa 2010 driver installed w/ Boot Camp (Leopard?). When I upgraded to Lion, I assumed all latest drivers would be installed in Boot Camp, and I've seen no info on whether Mountain Lion would provide more current video drivers...running 'Update Driver' (just to see what would happen) within Windows 7 yields "You're using the latest driver", which is not actually correct, but may be in the 'Boot Camp ecosystem'.
Are there any ways I can reliably update the video drivers? I know the retail/Nvidia latest is "296.10" from March, 2012...but likely that won't install or work properly in a Boot Camp setup (or am I wrong?).
Any info/ideas would be greatly appreciated. Thanks!

Wait for GTX 670 down the road then.
You had to have used BCA, downloaded and then run the setup - you can even just navigate to, find Nvidia driver folder and check the Details of that. Or why bother, the real driver is Nvidia anyway.
http://us.download.nvidia.com/Windows/301.42/301.42-desktop-win7-winvista-64bit- english-whql.exe
How to tell: Device Manager for one. But the easiest way to see everything, including temps, fan speeds, chipsets and driver versions - and more:
http://www.aida64.com/product/aida64-extreme-edition/overview
Also, most every Mac Pro owner has needed to manually download and install RealTek driver too for audio out the back ports.
Go to www.realtek.com though instead of using MediaFire - they have started causing a lot of pop-unders and other adware that I find disgusting and questionable, even if the site and service needs "ad dollars" popups were something users ran from and why we (try) using and turning off all those things they manage to find ways around. And the malware/adware and SQL-injection schemes are still with us. So watch for and personally avoid MediaFire - might be paranoid but then I consider it reasonable caution.
Others:
GPU-Z:
http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
AIDA64 Extreme Edition
http://www.aida64.com
http://www.aida64.com/product/aida64-extreme-edition/overview
CCleaner
http://www.piriform.com/ccleaner
Latest utilites - all in one location
http://forums.tweaktown.com/gigabyte/30530-latest-overclocking-programs-system-i nfo-benchmarking-stability-tools.html

Video Drivers for Touchsmart IQ770

Hello,
I'm having difficulties finding the drivers for my HP Touchsmart, I have just upgraded to Windows 7 and none of the video drivers will work
I've already tried over 15 drivers, starting with Win 7 32-bit to Win Vista ones...
My operating system is, as specified above, Windows 7 32-bit and my computer is a Touchsmart IQ770.

Win 7 32bit or 64bit. ??
either way
Search for Nvidia Go6100 or Go7600
Nvidia main site.
Worked for me on the 771 unit I was playing with.
Hope it helps.
Hv.
I never knew who HP were until my workshop got filled with faulty equipment. !! I know who Apple are now too.

V570 video drivers don't work with Windows 7 Home Premium 64

Yesterday I bought a V570 notebook, with an addition Windows 7 Home Premium 64 BIT OEM, since the operating system on it was Free Dos.
I've installed Windows and started to install the drivers from the disk that came with notebook. After I've installed the Intel VGA driver, on boot I got a bluescreen, then the notebook just started to restart. I couldn't get a restore so I had to reinstall windows again. After that I've tryed to use the drivers from the lenovo page, from windows update, all the same result.
So I've downloaded an illegal copy of windows 7 ultimate, just to test it out, and guess what, IT WORKES PERFECTLY FINE! Now I can't and won't use that windows, this is why I paid for an original one, so please someone tell me what can I do to make it work! I was up until 4:15 AM and coulnd't find an answer. There is a national holliday today in Romania, so the guys from the call center are not working today.
Solved!
Go to Solution.

I finnaly resolved it. If anyone else has this issue, here is what you do:
1. install all drivers from the CD, except the ones related to the graphics card
2. install all Windows Updates, except the ones related to the graphics card. You will have to reboot a couple of times, and keep installing until the only updates that remain are related to the graphics card.
3. install the video drivers from the CD
4. ENJOY

Error launching Premiere Pro CS6 due to non-capable video drivers

Premiere Pro not finding any capable video drivers. I am newly subscribed to the CS6 Creative Cloud and using a brand new Toshiba i7 windows laptop. When I try to launch Premiere Pro, I get the error message -" could not find any capable video display modules. Please update your video display drivers and start again." This is the only/first Adobe program that I have installed so far besides the Adobe Application Manager on this machine. I believe the i7 controller should be able to handle this. What next?

More hardware information needed... ESPECIALLY the brand/model graphics adapter in that laptop, and the driver version
Read http://forums.adobe.com/message/4200840
Also, some laptop information...
For effective HD video editing, a laptop with the following
-at least the Intel sandy bridge 2720 or 2820 quad processor
-1280x900 display with OpenGL 2.0-compatible graphics card
-and 8 or 16 gig ram and Win7 64bit Pro
-and 2 internal 7200 HDDs minimum
Does your graphics adapter "card or motherboard chip" and display match what I bolded?
Dual laptop video http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0

Video drivers on start-up

Similar Messages

Maybe you are looking for