Video Fade out not audio

I'm trying to make the video fade out while the music continues to the end. I also want to fade in with the video while the music is playing.

Of course they do. At least in Expert view. Have you toggled open the tracks so that they're not in collapsed view?

Similar Messages

Audio fade out not working

I've imported clips from my camera to iMovie HD 6 and created a 2 minute "movie." I imported a song from iTunes but want it to fade out before the movie ends. I've followed the instructions and dragged the volume bar down where I'd like the fade out to happen but nothing changes. I've also extracted audio from the clips I'd like to play without music but nothing changes. The audio also plays past the end of the last clip. I also followed the instructions to delete the audio from selected clips by placing the cursor in the audio bar and waiting for it cursor to change form into that t-bar shape but it doesn't happen. I've closed out and re-opened the project more than once. Following the instructions was easy but there are simply no results. What am I missing? Thanks!

Hey, catspaw!
You remembered! My family history project now is complete from 1979-2008, with 2009 being compiled on an ongoing basis as I get the photos and videos.
I have nearly all the old photos scanned into iPhoto for both my husband's and my side of our family. There are only a couple of videos of our parents talking about their childhoods or some specific childhood memories, and one of my father-in-law telling of his days in the Navy in WW II, when he was one of the first Americans to go into Nagasaki.
I had all the photos scanned in already, but when the drive failed several months ago, I apparently lost a few of the photos. So my fil will need to lend his to me again. I also have some baby photos that my parents insisted they did not have, but they did, so I will be getting them next week.
Then, I have about 2000 slides that I'd like to put into this collection. It is easy to scan them, and I have already done about 400, but the ones from a couple of trips are just going to take too much time, so I found a local photo place that will scan them for me and put them onto a CD.....and they charge less than anyone else I have found. The draw for me is that they do it locally so I do not have to worry about the original slides getting lost. I am planning to take the slides in tomorrow or Monday. I think it will take them about a week or so.
I have 4 iMovies in progress for the 'old' photos. After I get all of them finished, I think I will upgrade to Leopard and install iLife 09 and begin to play around with iMovie 9. The big concern for me is that it does not allow exporting back to camcorder. I really like to do that with my edited movies so that I have a nice digital tape of the finished movie. Since I now will have to do only one family movie/photo project per year, I will have time to make little creative movies for the grandkids. I may even take some classes.
I have also thought about using Final Cut. I have FCE, not Pro, probably enough for my purposes. Ihave used it a couple of times for short movies. It has quite a learning curve, and it is not so helpful as iMovie since nothing is preset. Of course, it gives one great flexibility. I think that doing a few movies will give me experience enough to consider making the switch for the family movies, and maybe using iM9 for the short ones.
I have been following with interest the posts regarding getting the best quality from iM9 when putting it into DVD, and I have been learning a lot. Very thankful for these discussions.
Also, my camcorder is getting older and I am considering getting an HD camcorder; still have to think about whether I want to continue with tapes or not.....
I know that FCE and FCP take footage in DV format, so the DV tapes would be easy.
What do you think?
Return greetings from here....we are going to see some friends next weekend who have lived in the US for many years, but are from Adelaide!

Audio Fad Out not working ??

Dear all,
I've been working on a nice project for a while, and now for some reason, when I select an audio track and the audio button to get the advanced audio features, even though the "fad out" option is selected and manually increased to 2s, this has absolutely no effect while viewing the video. The audio track just doesn't have any fad out.
The tricky thing is that it works for some of them at the beginning of my project (the first 10min), but not for the others....
Any idea ?
Thanks
I'm using imovie 7.1.2.

My project is plenty of "adjacent" sounds, it's a slideshow with some musics coming from itunes.
I tried what you suggested, ie put some clips in between without any fade options but it does not make any difference.
On thing I have noticed, before rendering the project, I have a warning message saying that an event called "unknown album" was not found and would be replace by some black pictures.
What does it mean? There is of course (would be too easy...) no black pictures while playing the final movie. Could be linked right?
Any idea?

Captivate Video Blacks out while Audio continues

We are having problems with the video cutting out while the
audio continues. We have ran the captivate file from our web server
as well as downloading the files to our desktop and we experience
the same problem.
We updated to the latest Java v1.42, cleared the cache,
history, updated flash player V8, cookies and changed the proxy
settings.
Any help would be greatly appreciated.
Thank you

I actually figured out a fix myself. When I compared the 3 clips in detail, I noticed that the 2 that were having problems were not converted. All I had to do was to open the Clip inspector and click on the "Convert Entire Clip" button under the Speed section. Now my movie is playing fine.

CS5 Aplha Fade Out Not Working

Has anyone encountered the alpha fade in CS5 not working when fading a graphic out? Example, I want to fade out a graphic symbol from 100% to 0%. When I try to make my fade to 0%, the alpha slider snaps to 100%. Hopefully someone can help out.

Okay, I think it's faster with a visual. Let's focus on the "train" layer. As you see I have four keyframes, the first set fades up from 0 to 100 and the last set is supposed to fade out from 100 to 0 but the the last keyframe where the playhead is, won't go to 0.

Fade in Fade out not working on Rollover Image for Captivate 6

Hi
I am totally baffled with this issue. When I use Fade in 0.5 sec and Fade Out 0.5 seconds on a rollover image, it will not work. I even changed the default on my preferences for rollover images and it still will not work and does not show in my accordian panel in properties.
If I use Captivate 5, I do not have any problem. Any suggestions?
Thanks
Jeff

Are you forgetting that a rollover object has two parts? It has a hit area and the object that appears when you mouse over the hit area. Each part can have different settings in the Properties tab. In a rollover caption, the object that appears is a text caption. In a rollover image, the object is an image.
If you select the rollover object on the timeline, the Properties you see for it in the Properties tab are for the hit area. So having fade in or fade out set there will not affect the object that appears on mouseover.
If you select the caption or image on the stage in Edit mode, the properties shown in the Properties tab are for that specific object and can be different from the hit area of the same rollover object.
In your case, make sure that your image is set to have fade in or fade out. Fading on a hit area of a rollover object is not really useful at all.

Using time remapping w/AE CS4 to freeze time/video freezes but not audio

Ok I do alot of editing of sports. One thing I like to do is freeze the moment when a special play is about to happen, highlight the player (via masking), then resume play. I had no problem with this in CS3. Now when I use the same workflow in CS4 the video freezes but the audio doesn't. So when I play it back I see the video freeze BUT the audio is still playing...hence now my audio is not synced up with the video. Didn't do this in CS3. My workflow: from PP -rightclick clip- replace w/ AE comp- AE loads my clip in a comp- I enable time remapping- extend the duration of the comp by 5 sec- find the point I want to freeze-set a key frame-copy key frame to origninal position- now I have a 2 second freeze between 2 keyframes. When I check the comp in PP the video freezes where I want it to but the audio keeps playing during the freeze....even after render. Thoughts?

Hi,
I'm also having the same problem with CS4 version. I'm using Mpeg4 file shot on my canon 60d and it's freezing the video in places and continuing the sound. The whole clip is just over 2 mins and I don't have any effects at all.
Does anyone know how to solve this please???
Cheers!
Shan

Fading in is always fast and fade-out not smooth.

This is real simple but I can't seem to find why my fade-in and fade-outs are not precise.
Sub-question: Best way to control fades ?
I have a title layer to which I add a fade-in and fade-out behaviour,.
No matter how long the title duration my fade-in is always short and fade-out is smooth but really speeds up for the last second.
The HUD says fade-in 120 frames but the fades is only 30.
I'm applying the fade to the text layer.
And yes both layers are the same length.
Thanks

Ok.
Tried other variants but to no avail.
Fondu simply means fade in / fade out
No matter how long I make it the image fades in really quick in the first 20 images.
I'm lookin for a smooth and slow fade.
I have also a 178 images fade in but the beginning will fade in at the same speed as the 48 images.

GeForce2 MX - MS Starforce 818 S Video - TV Out not working ?

Hi,
I'm using MSI GeForce2 MX Nvidia MS Starforce 818 which have an S-Video video out port in it. A few while back, I try to use this TV Out port for the first time with the S Video cable given upon purchase. Since I have no idea how to use this TV Out port before, I was skimming through everything, and found out that I can use it by clicking on the "Display" properties of windows, go to the "Settings" tabs, and I can choose the display that I want to use, whether a regular monitor I'm using, or to the tv when the S-Video TV Out cable is plugged in. Yesterday I try to do the same thing, and suddenly on the "Display" properties, on the settings tabs, I can't choose where do I want the display to be, and plugging in the S-Video cable only cause the monitor to blank out.
I haven't tried uninstalling the video card, since I can't find the cd that comes with it when I bought the video card about 4 years ago.. and I can't seem to find the drivers on the net as well. I'm using win xp sp 2.
Anyone know how can I use the TV Out port aside from the "Settings" tabs of the "Display" properties of windows ? I'm lost right now, and dunno what is wrong.
Sorry if my english is hard to understand, do let me know if there's anything u can't understand.
Thanks,
Djoni

Now that Nview detects my TV I was hoping that maybe I could select the clone options and use the dual monitor option of my card. Nope, Nview detects the monitor and the tv but all the other options are greyed out. So I cannot use anything else than Standard (Dual View).
Ok. I think i have same problem. I have solved it by connecting my analog monitor to to DVI output with DVI to analog conector that came with the vga card. And it worked. Only now i have another problem. Vga card can't recognize my tv as PAL/G but as M/NTSC. Everytime i reboot my computer it goes back to M/NTSC. I am using detonator drivers 40.72 and with original MSI drivers it worked OK.

Adding video fade out or cross fade to specific spot in clip

I have a clip that has a visual glitch at the very end. I want to fade the video prior to the glitch but keep the audio. The glitch happens about 20 frames before end of clip. So I would like to just fade the visual keeping the audio intact, or just edit the video marrying the parts before and after glitch while maintaining the audio. So far I can't figure out how to place a transition at a specific spot in the timeline of a clip. I can only place them between different clips.

Hi
As to Audio
I think that Extract Audio was avail in iMovie 4. Use this (Advance menu/Extract Audio)
As to transitions
Put a black photo (.jpg) at very end - Now You can apply transition.
Yours Bengt W

Video importing, but not audio

Hello-
When importing files into final cut, the audio on some of the footage does not import. anybody know why? the file types m-peg from my sony handycam. they play with audio on the VLC player but not in final cut.

There are a few versions of MPEG, yours most likely have multiplexed audio.
Working with any kind of MPEG based material in FCP is a terrible hassle. It needs to be transcoded to an editing codec such as those listed in FCP's Easy Setup menu.
So.... where do your files come from, a camera? Tell us the manufacturer and model.
Someplace else? Please specify so that we can advise on the best way to proceed.
It would also be useful to know which version of Final Cut Pro, QuickTime and Mac OS X you are using.

IDVD: weird audio after fade out..?!!

Hi, i dont know if anyone else is having this problem or whether im doing something wrong. When i fade out the audio (iTunes song) it suddenly gets louder again b4 it stops. Ive checked all the audio volumes (zoomed in aswell) all fine, and i split the unwanted portion straight after the fade out. It plays fine in iMovie but not in iDVD or on a burned DVD. What am i/or the software doing wrong..!!!
p.s. im quite new to macs so am not a wiz and the movie is quite heavily edited, transitions loads of clips ranging from 2 to 10 second - 25 min long.

Yes, indeed, Warner,
An ongoing frustration for me as well. I have made dozens and dozens of DVDs with iLife 06, but this audio problem started without any warning.
For a one-minute "loop" I will export a short video clip, I will un-check the box on the right of the top line to silence the sound track. For good measure, I also adjust the volume of the track all the way down to zero. Fine! Then I paste different music on an audio track below, with fade in and fade out. It plays fine in iMovie, and Quicktime. BUT when I share it in iDVD, every single audio track (including the original, which is switched "off") is heard at the same level, which can be very noisy and very frustrating. None of my fades (in and out) work at all. I even tried importing it from the "media" window, and it did the same stupid thing. I ALSO tried extracting the audio from the original clip so I could delete it on a timeline below. Ha!
Who is trying to torture us? I wanted to stay with iMovie and iDVD as long as I could before spending the money on Final Cut Pro. But the quirks and inconsistencies in the iLife are driving me nertz.
-Peter

IMovie 9.0.2 - audio fade out doesn't work

Has anyone found any working solution to "fade out" not working? Before movie rendering all is OK, but in rendered movies there's no audo "fade out" - the audio just stops.
Frustraiting!
Regards,
Gitarzysta

Christil
Premiere Elements 9 on Windows 7 64 bit (are you working from the 9.0.1 Update?)
Are you referring to the fade in fade out video audio shortcuts?
How are you doing what you refer to as "Complex Fades Work"?
I am not aware of any hardware acceleration control in any Premiere Elements options related
to Fades issues.
Please review the following related to the Fades shortcuts and see if any of it applies to your
situation.
http://www.atr935.blogspot.com/2013/06/pe11-timeline-fade-out-shortcuts-and.html
Is your issue specific to one particular project? Is this a "it worked before but not now" or "it never
worked before" type matter? Pending further details, we might consider deleting the Adobe
Premiere Elements Prefs file or, if necessary, the whole 9.0 Folder in which it exists.
But, we will await further details from you before deciding what next.
Thank you.
ATR

Problems with fade outs - audio

Hi
I have a problem that's driving me crazy. Whenever I add a fade out transition at the end of a clip, a random piece of audio from earlier in the clip appears at full volume alongside the fade. Is this a bug and does anyone know a way round it? iMovie 5 never used to do this.
Any help greatly appreciated.
Thanks
Ian

I had a similar issue just on the weekend. But, it wan't just the "fade out transition". Other transitions were affected by this same "bug".
I decided to fade out the audio first before applying the "fade out transition". This is not the solution which I wanted personally, but it did the trick. No random piece of audio.
I do agree that a real solution to the issue would be excellent! Hopefully, tech support at Apple will have something for afrocelt1121.
Good Luck!
Rodger

How to fade out text on top of video footage?

Not quite sure how to sum up my question in Subject line, but here's what I'm trying to achieve: I've placed a text (Lower 3rd) on the V1 track, and a video clip on the V2 track. The Composite of the text is 'Normal', the video clip is 'Travel Matt - Alpha'. So the video appears inside the font, which is what I wanted.
But now I'd like to fade out the font, while just leaving the video play. When I add a Fade In Fade Out effect to the text, though, the video fades out as well, until the effect is over. Do I make sense?
Is there a way to just fade out the font (or Dissolve or Slide) without touching the video?
Thanks!

The video should be on V1 and the text on V2.
Click the zig zag button at the bottom left of the timeline and you will see an opacity line going across your clips just below the top of them.
Put a keyframe on the opacity line of the text clip around a couple of seconds before the end.
Put another keyframe at the end of the text's opacity line and drag it to the bottom of the clip.
This will cause just the text to fade out.
You can do the reverse at the beginning to make it fade in if you wish.
PS. To create keyframes click P and your cursor will become the Pen (Keyframe) tool.

Video Fade out not audio

Similar Messages

Maybe you are looking for