Video will only return to back menu when it is finished playing

If someone has seen enough of the videos on my DVD I would like them to be able to hit the stop button and return to directly to the menu, as it is now they can only do it when the video is finished playing. Have I missed a step in the building process somewhere?
Any help would be appreciated.

When the viewer presses the stop button on the DVD player, the DVD should stop playing - not go back to the menu.  To access the menu, they should be able to press the menu button on the remote.  What happens on your DVD when a viewer presses the menu button?
-DH

Similar Messages

  • API search will only return the first 200 results????

    It seems that I can only retrieve 200 results when using doOracleSimpleSearch api call.
        osr = oses.doOracleSimpleSearch(strSearch, 1, 1000, false, false, true);
        nCount = osr.docsReturned;
        nCount2 = osr.resultElements.Length;
        nCount3 = osr.estimatedHitCount;nCount and nCount2 are both 200.
    nCount3 is 1332
    Ok, no problem. Even though I asked for 1000 results, I figure it will only return 200 at a time, so I write a simple loop.
       while (nTotalResults < nCount3)
          osr = oses.doOracleSimpleSearch(strSearch, nTotalResults + 1, 200, false, false, true);
          nCount = osr.docsReturned;
          nTotalResults += nCount;
       }After executing the search the first time, nTotalResults is set to 200, so I'm now requesting that the search starts at index 201 and to return the next block of 200.
    osr.docsReturned is now = 0
    stuck in infinite loop because it's not returning all my results.
    Update:
    It seems this is not just an API issue. If I do the search through the web interface, and go to page 20 (it's displaying 10 results per page) I see results. But as soon as I go to page 21, the page is blank even though it says there are over 1000 results.
    Edited by: JimG on Feb 15, 2012 5:17 PM

    You need to change the "Maximum Number of Results" from the Admin GUI.
    Go to Global Settings -> Query Configuration, and you'll find it there.

  • You Tube videos will only play at 360p and 240p, no 480p. Was working before yesterday.

    Standard definition You Tube videos will only play at 360p and 240p, no 480p. HD videos will play at 720p, no 1080p. It was working until yesterday. I have not made any changes to Firefox. I tried upgrading to the latest version. This is not helping either. I don't have this problem when using Internet Explorer. The problem exists on both of my computers.

    hello kmcvety, this should be an issue which is going to be resolved in firefox 36 - you could try it out right now in the beta version:
    https://www.mozilla.org/firefox/beta/

  • Why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS app.?

    why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS ipad app.? Thanks for your help

    Privacy is an Option in the Settings App, its not in Safari as that applies only to Safaris browsing.  Its called Privacy in  IOS 6  In previous versions the same thing can be found under Location Services.

  • Returning to Source menu when MENU is pressed

    I have found close answers to this, but not spot on....
    (1) MAIN menu button "PLAY ALL" plays track. If MENU is pressed in the middle of play, it returns to MAIN menu. Good.
    (2) From the CHAPTERS menu, if I press a selection, it goes to that chapter & plays. Good also. If I hit MENU while playing that chapter, however, it goes back to MAIN menu. Not good. I want it to go back to the CHAPTERS menu & to the button that I first pressed. But, I want to keep the (1) menu connection, also.
    I'm fine with my end jumps on the PLAY ALL track. It plays through to the end of all chapters. And the chapter tracks continue to the end, too. Separate stories would isolate all the tracks.
    I just want the MENU button to return the viewer to their starting menus when pressed mid-play.
    Any and all guidance is appreciated.

    No worries.
    The theory is that each time you access a new menu you change a value in a memory slot (a GPRM). Move from menu to menu by going via a small script each time, and then you can rely on that value when using the menu button on the remote.
    So, let's assume you have two menus - the main menu and a scene selection menu. Create two scripts and in the first one set it to read:
    mov GPRM0, 1
    Jump menu1
    on that menu you will have a button that goes to your second (scene selection) menu... point it to the second script instead of the menu, and make the second script read:
    mov GPRM0, 2
    Jump menu2
    On the second menu you'll have a button to return you to the main menu... set that button to go to script 1. In fact, any time there is a possible choice of menus in your project, set the button to go to the appropriate script.
    Now, set script 1 to be the start up item for your disc. This will ensure that there is a value right from the beginning of playback.
    Finally, when you press the menu button you need to go to the correct menu. A third script needs to be created which reads:
    Jump menu1 If (GPRM0 = 1)
    Jump menu2 If (GPRM0 = 2)
    If you are concerned that there might be a time when GPRM0 doesn't have a 1 or a 2 in it (can't think why, but things might go wrong), then add a third line:
    Jump menu1
    This ensures that you will end up somewhere at least... although I don't think this will ever be needed... it's a safety net.
    So - a little more long winded than Dave N's ones, but guaranteed to work regardless! It get's a bit tiresome with lots of menus, but there are other ways around it then. For a small-ish number, use these 'freestanding' scripts and keep away from pre-scripts if you are using GPRM based button jumps.
    For example, let's say your menus have 30 buttons on them each (wow... too many!). When you are on button 24 and you play, then go back to the menu you really want to be back on button 24, right?
    In this case you'll need to set up some more scripting to accommodate that. Have a look at http://www.dvdstudiopro.co.uk/gprm-based-button-jumps/ for some ideas on this one (it uses GPRM0 so you'll at least need to change that to a different GPRM) - the two systems can be combined with a little thinking.
    I'll write a tutorial about it and post it at http://www.dvdstudiopro.co.uk as soon as I get a chance.

  • My ipod video will only show the apple sign

    i got a 30 gb ipod video from someone because they cant get it to work. he said if i could get it to work i could have it so i bought a charger and plugged it into the computer. it said very low battery please wait right at first and had a little circle thing that showed it was loading. now it will only show an apple sign on the screen no matter what i had it plugged in over night i tried reseting it but it just went right back to showing the apple sign is there anything else i can do without sending it to apple because it is not under warranty anymore.

    See if these help.
    iPod shows only an Apple logo and doesn't start up.
    Only the Apple logo appears when turned on.

  • Equium M50 will only connect to WLan router when security is off

    MY Equium M50 will only connect to my wireless BELKIN G+ MIMO ROUTER when the security is turned off,
    What is the reason for this please?
    Blonde Bimbo!!

    Hello
    Did you mean the WLan encryption which secures the entry to the wireless LAN?
    I suppose you have set the encryption (WPA, WEP, etc...) on your WLan router but didnt configure the WLan card.
    Well, in my opinion you should check which WLan encryption does the card support and then choose it on the WLan router. The encryption key should be set on the router and on the notebook!

  • DVD doesn't return to main menu when reaches end - Why? How?

    My DVD plays through full movie and then essentially just stops at the end vs returning to the main menu. The menu button doesn't even return it at that point. What can I do to make it return to the main menu when it reaches the end?

    I'm having a similar issue...
    In all the previous projects I've created with iDVD, the movie always automatically returned to the DVD main menu at the very end of the presentation.
    On my current project using iDVD 6.0.2 (787), this is not occuring. At the end of the DVD presentation, the screen continues to stay black until the "stop" button is depressed.
    I'm obviously frustrated because I have looked everywhere in "iDVD Help" and within the on-line support discussions for an answer, but to no avail.
    I don't think that it's a DVD media issue because the problem occurs on iDVD when previewing (and obviously on the DVD media after burning).
    Does anyone know why this is happening? Is there a special command, tool, or secret handshake I need to provide in iMovie HD, or iDVD? Any insight is most appreciated.
    -j

  • My laser Jet 1320 will only print one copy, even when asked to print mutiples. Any thoughts?

    I have a Laser Jet 1320. I have windows Vista (I know!!!) It will only print one document despite being instructed to print 2 or more. I have tried re-installing the drivers but to no avail. Does anyone have any solution possibilities. Thanks

    Then use the latest solution!
    Which doesn't need specifying either.
    Peter

  • When I convert my Videos to iPod there is no sound when I try to play them.

    Help Please,
    I have some music videos in iTunes and I have hit the advanced button and converted the selection to iPod. It converts them so that I can put them on my iPod but there is no sound at all when the video plays on my iPod. When I do this procedure to convert the video on iTunes it pops up another copy of the video on the iTunes movie section which I am assuming is the converted video. If I click on the original video on iTunes the video will play and I hear the music. If I click on the converted version that goes to my iPod I see the video but hear no sound. I hope you guys have some help for me.
    Thanks in advance.

    Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • Detecting when the movieClip finished playing

    Hi...
    Does anyone know how to detect when the movieclip is finish playing?
    i want to play an animation that is converted into a movieclip and indicate success of that level and then after the movieclip is finished playing then i want to run a function which will bring user to the next level.
    any suggestion?
    THanksss

    stage.addChild(play_mc);
    play_mc.gotoAndPlay("startPlay");
    play_mc.addEventListener( Event.ENTER_FRAME, onfrm);
    function onfrm( evnt: Event ): void
                    if (play_mc.currenFrame == play_mc.totalFrames )
                        play_mc.removeEventListener( Event.ENTER_FRAME, onfrm);
                        alpCount++;
                        splitWord(alpCount);
                        underlines();

  • Real player plugin won't work anymore? How do i fix it? Videos will only play when the plugin is turned off and i am unable to download videos?

    the download video box does not come up anymore and the videos do not play?

    Probably due to the RealPlayer Browser Record Plugin being blocked by Mozilla due to the huge number of crashes it has been causing over the last week and a half, or so.
    https://addons.mozilla.org/en-US/firefox/blocked/i106 <br />
    https://addons.mozilla.org/en-US/firefox/blocked/i107

  • Time Machine only seems to back up when I'm logged on

    Recently, I've noticed that Time Machine seems to be performing backups only when I'm logged onto the computer.  It used to take them every hour, more or less, but now that's not the case.  When I log in, I can see the TM icon in the tray become active almost immediately.  Plus, if I've been away from the machine for a few hours, when I check the TM preferences the last backup has not happened in the last hour.  Any ideas?  Thanks!

    If the computer is Off, obviously, or in Sleep mode I do not believe that Time Machine will back up your files.  The computer must be Awake.
    Hope this helps

  • Quicktime X will only open the first file when launched.

    Hi,
    Here is my problem. After upgrading my MacBook 4,1 to Snow Leopard, video files should open in Quicktime X.
    What's happening is that, if Quicktime X in not launched yet, the first video file I double click on in my "Movies" folder will open in Quicktime X. But then, any subsequently doubled clicked file will not open at all, and console is returning this error message:
    QuickTime Player[5246] -[MGApplication _doOpenFiles:]: unrecognized selector sent to instance 0x100b0a890
    Could anybody help?
    Thanks in advance,
    Luc

    Once again, it has nothing to do with files that should only open in QT7. QT7 is already installed on my SL 10.6.1 and, yes, it opens the files that need to be opened with it.
    I'm talking about a wrong behavior of QT X here. It opens whatever video file appropriate for it the first time it launches, but THEN, subsequent double clicked video files THAT SHOULD OPEN WITH QT X are not opening at all, and the console is throwing this error message:
    QuickTime Player[5246] -[MGApplication _doOpenFiles:]: unrecognized selector sent to instance 0x100b0a890
    Then, if I quit QT X, and double click on the file that previously didn't open, QT X launches and display the file as should be.

  • IMac will only safe boot (blue screen when not safe booting).

    A buddy asked me to help with his Intel based iMac. It was giving a blue screen when trying to boot up (and an odd cursor along with the blue screen). The cursor moves around the blue screen but looks like two cursors. One cursor is a normal arrow pointer, the second is a rectangle about .25 inch wide and 1 inch tall made up of about 10 horizontal lines.
    I'm very familiar with Macs and OS X and was sure it was probably a messed up preference file (most likely login preference). It wasn't.
    Here's the odd circumstances:
    I have an intel macbook that if I use firewire target disk mode I can boot just fine off his iMac.
    His computer will not boot off my Macbook that is in firewire target disk mode.
    We cloned his hard drive to an external firewire hard drive (using Carbon Copy Cloner), my Macbook boots off it just fine, his iMac will not.
    He's been wanting to go to Leopard so we upgraded his computer (did basic upgrade), but it still blue screened (with odd cursor).
    Then we did an erase and install. Still no difference in behavior.
    I would almost be convinced that it's a hardware failure, but it will safe boot every time.
    Here's what happened when it died. His son was playing a Star Wars game (I'm not sure which one). The kid was in the middle of the game and paused it when it was time for dinner. When the kid went back to play, the computer was frozen. They tried everything to unfreeze it and ended up powering it down. Started the blue screen ever since.
    He's going to contact Apple (it's barely still under it's warranty) but I was hoping someone here has another idea what it could be.

    I found this topic while trying to find an answer to my problem. It seems we have a similar thing going on with our imacs (although mine is a much older crt imac). I'll copy and paste my original post from the imac board :
    Hi
    I received a free imac snow (G3 500mhz) from someone. He told me it was broke, and someone told him the logic board needed to be replaced.
    I brought it home and tried to start it up. It gave the '?' folder icon. I started up from an OS 9.1 cd - Success! Except there was no HD. I opened it up and discovered that the HD wasn't connect to the ATA cable. I was able to start up to a previously installed Tiger. Except once it booted it would quickly freeze - the mouse pointer would turn into a scrambled beach ball (very strange) and wouldn't move.
    I did some research and found about the potential problem with OS X and the imac's firmware. I restarted from the 9.1 CD and installed that OS. Everything seemed fine and was running ok (from my limited time on it). I then DL'd the latest firmware for the imac (4.1.9.) and tried to run it. Except the message came up that the latest firmware had already been installed. So i guess thats a good thing. I don't have to worry about firmware being a problem.
    So i did a zero out wipe on the HD and installed tiger from the dvd. But on the first restart after installation (where i should go to the set up assistant) I get the scrambled beach ball and it freezes.
    I thought perhaps the HD is faulty and ran disk utility on it - it came back as fine. I doubled checked to make sure it was set to 'master'. it sure was. I decided to swap out the HD anyways since i can't see what else could be the problem and put in a different 30gb IDE drive. I once again zeroed out the drive and did a fresh install of tiger. On restart i get the same scrambled beach ball and the freeze.
    I guess i should describe the scrambled beach ball. It's seems like the beach ball icon, except the bits that make it up are out of order and glitched out.. perhaps a video problem?
    Could this really be a logic board problem? It was working in OS 9.1 fine. It starts up from system CDs and DVDs fine. Wouldn't a logic board exhibit the same problems on those systems?
    Anyone have any idea?
    Update - starting in Safe mode (restart with shift held down) works, and i was able to update to the latest version of Tiger, but once i restart with the full system i get the same problem.
    This seems to me that it ISN'T a logic board problem, but more of a system software problem. Now my question is how do i isolate and fix the problem in Tiger?
    I guess i'll post this question in the Tiger forum, but if anyone has any ideas please let me know.
    Thanks

Maybe you are looking for