View data in ODS
BW Experts,
I have a new ODS and have loaded data in it. When I rt click on the ODS and choose manage and then if I want to see the contents of the ODS I am getting the following error.
<b>System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZSD_O01 ZSD_O01
Message no. DBMAN100
Diagnosis
A system error with the following parameters has occurred in the data manager:
Parameter 1 = &v1&
Parameter 2 = &v2&
Parameter 3 = &v3&
Parameter 4 = &v4&</b>
However, I can still see my data through my active data table tab.
Any thoughts on why I am getting this error when I want to see it directely through manage ods?
Thanks
Ashwin
Hi Ashwin,
Is the ODS enabled for reporting? I came across a similar situation recently and it was because I did not have the auth for data access for that particular ODS. I could look at the data through SE16 and the active data table, but not if I did a LISTCUBE for it.
After it was added to a role and assigned, the error message was removed. (Auth object: S_RS_ODSO)
Hope this helps...
Similar Messages
-
Hello,
I am trying to load data from r/3 into the ODS.
When i check in the monitor its saying that
07:37:12 ( 549741 from 549741 Records )
But its not turning green.Its still yellow.
I checked the new data in the ODS. The number of entries in it is 0.Hi
You can view the data in ODS only after the status is green.
Check if it is showing any error in the description.
If not then wait for some time. we can't do anything as is it showing yellow(in process) status
Cheers
SM -
Errors when loading data to ODS
Hi,
I am getting the following dump when loading data to ODS
whta might be the problem
Runtime Error MESSAGE_TYPE_X
Date and Time 29.09.2006 14:26:52
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Test message: SDOK_GET_PHIO_ACCESS 001
Technical information about the message:
Message classe...... "1R"
Number.............. 000
Variable 1.......... "SDOK_GET_PHIO_ACCESS"
Variable 2.......... 001
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLSDCL" or "LSDCLF00"
"INTERNAL_ERROR"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "bomw093a"
Network address.......... "132.186.125.66"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 16
Short dump setting....... "full"
Database server.......... "BOMW093A"
Database type............ "ORACLE"
Database name............ "BIW"
Database owner........... "SAPDAT"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 6271776
Heap..................... 0
Page..................... 24576
MM Used.................. 3921120
MM Free.................. 258392
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "IC881147"
Language key........ "E"
Transaction......... " "
Program............. "SAPLSDCL"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLSDCL" in "INTERNAL_ERROR".
The main program was "RSRD_BROADCAST_PROCESSOR ".
The termination occurred in line 25 of the source code of the (Include)
program "LSDCLF00"
of the source code of program "LSDCLF00" (when calling the editor 250).
The program "SAPLSDCL" was started as a background job.
Job name........ "SECOQUERY"
Job initiator... "IC881147"
Job number...... 14265102
Source Code Extract
Line
SourceCde
1
2
INCLUDE LSDCLF00 *
3
4
5
6
FORM INTERNAL_ERROR *
7
8
Handles unexpected error conditions (internal errors)
9
10
--> VALUE(U_ROUTINE) Routine/function module where error occured
11
--> VALUE(U_ERROR_CODE) Identifier in routine (e.g. number)
12
--> VALUE(U_VAR1) Variable containing further information
13
--> VALUE(U_VAR2) Variable containing further information
14
--> VALUE(U_VAR3) Variable containing further information
15
--> VALUE(U_VAR4) Variable containing further information
16
17
form internal_error
18
using value(u_routine)
19
value(u_error_code)
20
value(u_var1)
21
value(u_var2)
22
value(u_var3)
23
value(u_var4).
24
>>>>>
message x000 with u_routine u_error_code u_var1 u_var2.
26
27
endform.
28
29
30
*& Form BAD_OBJECT_TO_SYMSG
31
32
maps error information in u_bad_object into system message
33
variables
34
35
--> VALUE(U_BAD_OBJECT) structure containing error information
36
37
form bad_object_to_symsg
38
using value(u_bad_object) type sdokerrmsg.
39
40
sy-msgid = u_bad_object-id.
41
sy-msgty = u_bad_object-type.
42
sy-msgno = u_bad_object-no.
43
sy-msgv1 = u_bad_object-v1.
44
sy-msgv2 = u_bad_object-v2.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
4
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report Dissemaintion Framework: Executing the Transferred Settings
SY-MSGTY
X
SY-MSGID
1R
SY-MSGNO
000
SY-MSGV1
SDOK_GET_PHIO_ACCESS
SY-MSGV2
001
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
15 FORM SAPLSDCL LSDCLF00 25
INTERNAL_ERROR
14 FORM SAPLSDCI LSDCIU13 303
PHIO_GET_CONTENT_ACCESS
13 FUNCTION SAPLSDCI LSDCIU13 113
SDOK_PHIO_GET_CONTENT_ACCESS
12 FUNCTION SAPLSKWF_CONTENT LSKWF_CONTENTU02 63
SKWF_PHIO_CONTENT_ACCESS_GET
11 METHOD CL_RSRA_KWF_UTILITIES=========CP CL_RSRA_KWF_UTILITIES=========CM00B 50
CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
10 METHOD CL_RSRA_KWF_TMPL==============CP CL_RSRA_KWF_TMPL==============CM002 28
CL_RSRA_KWF_TMPL=>GET_STYLESHEET
9 METHOD CL_RSRA_KWF_TMPL==============CP CL_RSRA_KWF_TMPL==============CM001 227
CL_RSRA_KWF_TMPL=>CONSTRUCTOR
8 METHOD CL_RSRA_ENGINE_BC=============CP CL_RSRA_ENGINE_BC=============CM010 9
CL_RSRA_ENGINE_BC=>SET_TEMPLATE_FOLDER
7 METHOD CL_RSRA_ENGINE_BC=============CP CL_RSRA_ENGINE_BC=============CM001 75
CL_RSRA_ENGINE_BC=>CONSTRUCTOR
6 METHOD CL_RSRA_JOB===================CP CL_RSRA_JOB===================CM003 47
CL_RSRA_JOB=>EXECUTE_SINGLE
5 METHOD CL_RSRA_JOB===================CP CL_RSRA_JOB===================CM00E 14
CL_RSRA_JOB=>EXECUTE_SINGLE_RC
4 METHOD CL_RSRD_PRODUCER_RA===========CP CL_RSRD_PRODUCER_RA===========CM001 147
CL_RSRD_PRODUCER_RA=>IF_RSRD_F_PRODUCER_RT~PRODUCE
3 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM005 28
CL_RSRD_SETTING=>EXECUTE_NODES
2 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM002 73
CL_RSRD_SETTING=>EXECUTE
1 EVENT RSRD_BROADCAST_PROCESSOR RSRD_BROADCAST_PROCESSOR 197
START-OF-SELECTION
Chosen variables
Name
Val.
No. 15 Ty. FORM
Name INTERNAL_ERROR
U_ROUTINE
SDOK_GET_PHIO_ACCESS
54445445554445444455
34FBF754F089FF133533
SY-MSGV1
SDOK_GET_PHIO_ACCESS
54445445554445444455222222222222222222222222222222
34FBF754F089FF133533000000000000000000000000000000
U_ERROR_CODE
001
333
001
SY-MSGV2
001
33322222222222222222222222222222222222222222222222
00100000000000000000000000000000000000000000000000
U_VAR1
2
0
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SDOKI_MODE_DELETE
5
0000
5000
U_VAR2
2
0
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
No. 14 Ty. FORM
Name PHIO_GET_CONTENT_ACCESS
SYST
####################################################A#######P###############è#################
0000000000000000000000000000000000000000000000000000400000005000000000000000E00000000000000000
0000000010002000000000000000000000000000400000001000100010000000000000000000840000000000000000
PHIO_OBJECT_ID-CLASS
2222222222
0000000000
DUMMY_VERSTYPE
0
3
0
DUMMY_FCT_EXPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_IMPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_DELETE
222222222222222222222222222222
000000000000000000000000000000
FCT_VIEW
222222222222222222222222222222
000000000000000000000000000000
BUFF_XPIRE
000000000000
333333333333
000000000000
NO_BUFFER
2
0
SUBRC_AUX
3
0000
3000
SDOKA_EVENT_PH_FROM_REL_PRE
0022
3333
0022
SCREEN
%_17SNS0001592815_%_%_%_%_%_%_
2533545333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F173E30001592815F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
<%_TABLE_SDOKSTRE>
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
CONTEXT[]
Table IT_5544[0x89]
FUNCTION=SKWF_PHIO_CONTENT_ACCESS_GETDATA=CONTEXT[]
Table reference: 324
TABH+ 0(20) = 00000000801CE03C0000000044010000A8150000
TABH+ 20(20) = 0000000059000000FFFFFFFF047B0200D00E0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0x801CE03C
shmId = 0 (0x00000000)
id = 324 (0x44010000)
label = 5544 (0xA8150000)
fill = 0 (0x00000000)
leng = 89 (0x59000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000058
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x381CE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x98DC033D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CONTEXT
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PROPERTIES[]
Table[initial]
PROPERTIES
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 13 Ty. FUNCTION
Name SDOK_PHIO_GET_CONTENT_ACCESS
ALLOW_MODEL
2
0
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CLIENT
800
333
800
CONTENT_ONLY
X
5
8
CONTENT_OR_URL_ONLY
2
0
OBJECT_ID
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
RAW_MODE
2
0
TEXT_AS_STREAM
X
5
8
USE_URL_AT
2
0
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MODEL_RETURNED
2
0
COMPONENTS[]
Table[initial]
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_COMPONENT_ACCESS
Table reference: 337
TABH+ 0(20) = 00000000481BE03C00000000510100009D150000
TABH+ 20(20) = 00000000A8210000FFFFFFFF04C5010088190000
TABH+ 40( 8) = 01000000C1248000
store = 0x00000000
ext1 = 0x481BE03C
shmId = 0 (0x00000000)
id = 337 (0x51010000)
label = 5533 (0x9D150000)
fill = 0 (0x00000000)
leng = 8616 (0xA8210000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000107
occu = 1 (0x01000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x001BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x985D043D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_ASCII
Table reference: 312
TABH+ 0(20) = 00000000B01BE03C00000000380100009E150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100D81A0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0xB01BE03C
shmId = 0 (0x00000000)
id = 312 (0x38010000)
label = 5534 (0x9E150000)
fill = 0 (0x00000000)
leng = 1022 (0xFE030000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000113
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x681BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xB813043D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_BINARY
Table reference: 325
TABH+ 0(20) = 00000000181CE03C00000000450100009F150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100101B0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0x181CE03C
shmId = 0 (0x00000000)
id = 325 (0x45010000)
label = 5535 (0x9F150000)
fill = 0 (0x00000000)
leng = 1022 (0xFE030000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000114
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0xD01BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC08FD33C
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
PROPERTIES[]
Table[initial]
COMPONENT_ACCESS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_ASCII
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_BINARY
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_ID_AUX
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
X_DOCUMENT_URL
X
5
8
X_DOCUMENT_HTTPS_URL
X
5
8
X_COMPONENT_ACCESS
X
5
8
SUBRC_AUX
0
0000
0000
%_DUMMY$$
2222
0000
%_SPACE
2
0
SY-REPID
SAPLSDCI
5454544422222222222222222222222222222222
310C343900000000000000000000000000000000
No. 12 Ty. FUNCTION
Name SKWF_PHIO_CONTENT_ACCESS_GET
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
USE_URL_AT
2
0
X_ALLOW_MODEL
2
0
X_CONTENT_ONLY
X
5
8
X_CONTENT_OR_URL_ONLY
2
0
X_RAW_MODE
2
0
X_TEXT_AS_STREAM
X
5
8
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ERROR
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_MODEL_RETURNED
2
0
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
PROPERTIES[]
Table[initial]
SKWFA_C_ACT_READ
03
33
03
SYST-REPID
SAPLSKWF_CONTENT
5454545454445445222222222222222222222222
310C3B76F3FE45E4000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO+1(42)
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
CL_ABAP_TABLEDESCR=>TABLEKIND_STD
S
5
3
SKWFC_YES
X
5
8
No. 11 Ty. METHOD
Name CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
I_S_MIME_IO
FM_FOLDER 3AA00E1E0D0E3DCBE10000000A1144B5
4454444452234433434343434444333333334333343
6DF6FC4520031100515040534325100000001114425
I_S_FOLDER_IO
FBW_FLD 08BSWBLVV6N1IJCIG3VHEX2H8
4455444222233455445534344444354453432222222
627F6C40000082372C666E19A397368582880000000
L_T_PROPERTY_REQUEST
Table IT_5512[1x25]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PROPERTY_REQUEST
Table reference: 316
TABH+ 0(20) = 28D5D23C68D5D23C000000003C01000088150000
TABH+ 20(20) = 0100000019000000FFFFFFFF04C5010038110000
TABH+ 40( 8) = 10000000C1248400
store = 0x28D5D23C
ext1 = 0x68D5D23C
shmId = 0 (0x00000000)
id = 316 (0x3C010000)
label = 5512 (0x88150000)
fill = 1 (0x01000000)
leng = 25 (0x19000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000069
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC00BE03C
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 3644 (0x3C0E0000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x600DE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x98D5033D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
L_S_PROPERTY_REQUEST
KW_RELATIVE_URL
4555444545455542222222222
B7F25C14965F52C0000000000
L_T_PHIO
Table IT_5494[1x43]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PHIO
Table reference: 309
TABH+ 0(20) = E8D4D23CE0D3D23C000000003501000076150000
TABH+ 20(20) = 010000002B000000FFFFFFFF04C5010018120000
TABH+ 40( 8) = 10000000C1248000
store = 0xE8D4D23C
ext1 = 0xE0D3D23C
shmId = 0 (0x00000000)
id = 309 (0x35010000)
label = 5494 (0x76150000)
fill = 1 (0x01000000)
leng = 43 (0x2B000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000073
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x2010E03C
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 3643 (0x3B0E0000)
shmIsReadOnly = 0 (0x00000000)Hi priya,
Not sure: check syntax in your Update Roules, also at level of start routine.
Ciao.
Riccardo. -
Creating a view on two ODS using the most actual value of Timestamp
Hi All,
I am creating a view on two ODS. I have made an internal join of the field timestamp from both the tables. But the timestamp in bot ODS do not match, which is why there is no data visible in the view.
There is a requirement that the value of timestamp to be used has to be the most actual value of timestamp from the two ODS.
I would be grateful if some pointers regarding the same could be provided.
Thanks and regards,
Shruti KulkarniHi Shruti,
ODS should not be linked on Timestamp basis, there must be some other alternatives like document number, date etc etc...
In other case if its possible to include addtional key figure in to ODS then
create a dummy key figure , in the aggregation tab page Select Exception aggregate as "Last Value" and in the "agg.ref char" Select time stamp as info object. This setting will make sure that in the ODS you have only last updated data.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN. -
Error While Extracting Data in ODS
can anyone help me out i have created an ODS ZMM_OD81 but i got the following error messaged while extracting the data, pl. help me asap.
1. SIDs determined successfully for request REQU_3YGDERK275SLEUNKLGWOR30GZ from ODS object ZMM_OD81
2. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 incorrect with status 9
3. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 not correct
4. Inserted records 1- ; Changed records 1- ; Deleted records 1-
5. No confirmation for request ODSR_3YGHO1DSYIDFO0B7E8ZO2Q8MB when activating the ODS object ZMM_OD81
6. Communication error (RFC call) occurred
7. Activation of data records from ODS object ZMM_OD81 terminated.
thanx
abhishek suppalHi Abhishek,
I guess the error occured while activating the request and not while loading it. You can confirm this by checking in the details tab of the monitor for that request.
Try following the below steps. They might solve your problem.
1> Go to manage view of the ODS and force the QM status of the request to 'GREEN'.
2> Try activating the request manually.
Regards,
Sree -
HOW TO VIEW DATA IN LOG VIEW - PROCESS CHAIN?
HAI FRIENDS,
I SIMULTANEOUSLY LOADED DATA INTO ODS AND INFOCUBE....I USED THE PROCESS CHAIN TO LOAD DATA.. BUT AFTER ACTIVATING, I COULD N'T VIEW THE DATA IN THE LOG.AFTER THAT I FOUND OUT DATA IS NOT LOADED INTO THE ODS ..SO I ACTIVATED IT AGAIN.. DID THE PROCESS CHAIN ACTIVATE.. EVEN AFTER THAT I COULD NOT VIEW DATA IN LOG VIEW AND ALSO WHEN I CLICK ON LOAD DATA PROCESS(ODS) NO DATA IS FOUND.. PLS HELP OUT
WITH REGARDS
APPUHi,
Go to the manage screen for that ODS. See teh relevent request and find how many records were transferred and how many added.
If it is zero added records, then check for any rules.
Arun
Assign pts if useful -
Shortdump problem for loadinf data from ODS to InfoCube
hai
im trying to load the data from ODS to InfoCube.But i got the following error like below
Short dump in the Warehouse
Diagnosis
The data update was not completed. A short dump has probably been logged in BW providing information about the error.
<b>System response
"Caller 70" is missing.
Further analysis:
Search in the BW short dump overview for the short dump belonging to the request. Pay attention to the correct time and date on the selection screen.
You get a short dump list using the Wizard or via the menu path "Environment -> Short dump -> In the Data Warehouse".
Error correction:
Follow the instructions in the short dump.</b>
I looked at the shortdump.But it says that there is no shortdump for that particular date selection.
pls tell me wht i have to do
i ll assing the points
bye
rizwanHi Rizwan,
Why does the error occurs ?
This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
o Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
o If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
o Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
o If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
o It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
o It is a system error which can be seen under the Status tab in the Job Over View.
What happens when this error occurs ?
The exact error message is System response "Caller 70" is missing.
It may happen that it may also log a short dump in the system. It can be checked at "Environment -> Short dump -> In the Data Warehouse".
What can be the possible actions to be carried out ?
If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
(From Re: caller 70 missing).
Also check links:
Caller 70 is missing
Re: Deadlock - error
"Caller 70 Missing" Error
Caller 70 missing.
Bye
Dinesh -
Data Federator - View Data in DF
Hi,
Can we view data in Data Federator if data source is SAP BW>
> Although you may have tested the connection, check your "leselect" log file
>
Checked in leSelect.log
Could not start server: Connect to SAP gateway failed
>
> Is it a case of resolving the DNS name? check in BW via RZ11 that the name is fully qualified as that is what DF is expecting.
>
Tried. However what parameter supposed to be entered. should it be I_RFC_DEXTINATION ? -
View data in client B from client A in the same SID without a valid logon?
Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan -
View data in 10.1.3.4.1 is not working
Hi
I imported SH Schema from the oracle database to the repository.But i can not view the data in admintool in 10.1.3.4.1
the steps are the following
1.import sh schema from the database to the admin tool
2.click on any table in physical layer and click view data
i got a error"table or view does not exist ORA-00948 Issue"
but table and views are exist in the database.pls helpuser13351713 wrote:
tnsnames.ora file entries are correct, i can connect to database with sql*plus
is any attribute in NQSCONFIG.ini may prevent view datanot that i'm aware of.
regards
John
http://www.obiee101.blogspot.com/ -
Can we view data in Multiprovider
Hello All
In one of my interview he asked me can v view data in multiprovider.(Not in reporting level).
I said no,he said yes?
If anyone knows abt this pl let me know.
Regards
balajiHi Balaji,
Yes. Your are right that teh multi-provider does not store any data. It is like a view that displays the data from various data targets using union. LISTCUBE displays the data using those unions and displays the data. It is not fetching data from any underlying table of the Multi-provider. Probably if you debug then you would find the various SQL statements fetching data from the other data targets using the join conditions.
LISTCUBE is just meant for displaying the data from an Info-provider in the backend.
If you are familiar with R/3 then you would have noticed that you can see the data in table or view in SE11/SE16 even though a table has data where as a View does not. It is something similar to that.
Hope this helps.
Bye
Dinesh -
Can't view data from BI Anaytics
Hi,
I am new to BI suite. currently our repository has two different connection pool associated with two different schema. Since my ex-coworker built the first one and left. I don't want to mess up with his work. I built another connection pool with different schema. There is no problem with deployment and i am able to view data in physical layer. But when i login to BI analytics and i found i am not able to view data. The error is:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 1031, message: ORA-01031: insufficient privileges at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT 0 s_0, "Sample Sales"."Products"."Brand" s_1 FROM "Sample Sales" FETCH FIRST 65001 ROWS ONLY
My DBA told me it might be ODBC driver problem since he told me he didn't even see the query from database monitor. When i check ODBC setup in BI server and found there is default odbc setup under System DSN.
does anybody know what this problem is?
ThanksGood day !
I will to public my results with simple solving my problem,
because it may be useful to somebody else.
---------------- Create materialized view ---------
create materialized view easydw.CUSTOMER_PURCHASES_MV
TABLESPACE "EASYDW_DEFAULT"
BUILD IMMEDIATE
USING INDEX
REFRESH FORCE ON COMMIT
AS
select "CUSTOMER"."OCCUPATION" as "OCCUPATION",
"PURCHASES"."CUSTOMER_ID" as "CUSTOMER_ID"
from "PURCHASES" "PURCHASES", "CUSTOMER" "CUSTOMER"
where "CUSTOMER"."CUSTOMER_ID"="PURCHASES"."CUSTOMER_ID";
Now if one of tables updated, you must execute SQL-command
"COMMIT". Before this you must deselect "AutoCommit" at
SQL-window, if you use Application Express.
Winni. -
Not able to view data from more than one data package in PSA
Hi Friends,
Desparetly trying to view data in PSA. Problem :
If i mark more than one datapackage this error raises:
You must only select one data packet when entering data record numbers
Message no. RSAODS127
And there is no change to reset data record numbers.
What is wrong ?
Thanks in advance for help.
Joe
BW3.5, SP21
Edited by: J.F.B. on Jul 2, 2009 11:40 AMHi again,
Seems I'm too stupid for this issue.......
As I understand there are two ways to view PSA :
1. PSA maintenance in RSA1
2. In SE11/SE16 viewing the underlaying transparent table
ad 1.
When I try to filter erroneous records for more than one datapackage situation is as described above.
ad 2.
Trying to view the table works, but where is the chararcteristic/field marking a record as erroneous
in table /BIC/Bxxxxxxxx (table containing PSA-Data) ?
Thanks
Joe -
Unable to view Data Analysis in Project Server 2007
Hi,
I am currently using Project server 2007. One of our PM is not able to view Data Analysis information which are available to other PM.
It says 'The query cannot be processed. Either the user doesn't have access to Analysis service Database or the database doesn't exist"
We checked the following.
Tools >
Internet options > Security tab > Click Trusted Sites >
Custom Level > Search for Access data source across domains and its enabled.
Kindly advice. Thanks in advance!Hi Nathik,
You should also check that the PM in question has not been granted specific permission. If he doesn't have the "View OLAP Data" and "View Data Analysis" permissions, he will not be able to use the data analysis. Also check
that the PWA URL is in the trusted site of IE. Finally press CTRL F5 to clean IE cache. Check also that the OLAP cubes were successfully built.
A good way for you to debug is to use your admin account on his machine to see if it is a permission issue or a IE setting issue.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
How to view data in SNC after getting transferred from ERP
Hi all
I have transferred material ,vendor, customer ,scheduling agreement ,demand from ERP to SNC system.
Now I want to view this demand in SNC. What I have done is in SNC is I opened supplier view.
In supplier view, I opened SMI monitor. Now when I click on F4 help of product I am not able to view the material
which I had transferred. Same is the case with location.
I know that in SNC, in order to view data following assignment is required.
Material Location Business Partner ( Org ) --- > BP ( Person ) User.
Now I have assigned Material to location .
Location to BP ( Org ).
BP ( org ) to BP ( Person ).
BP ( Person ) to user.
But still I am not able to view the data in F4 help ( For SMI overview screen ).
Next I learnt about Selection modes in SNC.I think I need to assign selection mode u201CPDNF_NEWu201D
To application ID of SMI overview screen in order to view Product and location in F4 help.
If I am correct than please let me know how should I proceed. Else please let me know
What all configuration is required to view product and material data in F4 help and eventually the demand which I
Had transferred from ERP.
Best Regards
RahulHi Vasu/ hi Nikhil,
I have done what you mentioned but still could not see the data in SNC Web UI.
Let me explain once again.
Consider a case when Panasonic ( Supplier ) is managing inventory for Walmart ( Customer ).[ VMI scenario ]
Now
Step 1 : Walmart will create Material,Location,SA ,demand in his ERP.
Step2 : Master data with demand will get transferred to from customers ERP system to SNC system.
I can see Product and location by SNC -- > Master data -- > Product/Location.
Till this point everything is fine.
Next I have done following.
Assign my user to Business Partner of type org ( Customer ).
Location is assigned to Business partner.( Customer ) as material will be shiped to customer location.
Location is assigned to model 000
Material is assigned to Location and Planning version 000.
Now logically assignement is as follows.
User -- > BP --> Location --> Material.
Now when I go to customer view ,in product and location,I should be able to see my product and Location.
But I am not able to see.
Could you help where I am going wrong.
Regards
Rahul
Maybe you are looking for
-
How do I stop an e-mail address from going into junk
I have an e-mail address that is in a filter and that filter is supposed to run BEFORE the junk filter. However, every single e-mail from that e-mail address is going into the spam folder. How do I get Thunderbird to: 1. Respect the filter that is su
-
Bought a compilation CD, 2.3 hours----323MB, and want to make a copy to play in my stereo. (It has not AUX input so connecting the laptop is not an option) First time I've done this so put in CD-R and got message to mark the playlist and then choose
-
"The ActiveX control for flash player could not be registered."
Xp Pro 32 bit, SP3, 3.6.8 (seems to install ok on Mozilla, but I am keeping it off for now, for peace of mind). IE 7.0.5730.11 I have tried quite a few of the things on the first page of this [url]http://forums.adobe.com/thread/662582#2905677[url/]
-
How to send messages in iChat in plain text? (no html)
How to send messages in iChat in plain text? I don't need any formatting nor hiding links in achor tags.
-
Although I can share Movies and Music using the Import button the "display only items not in my list" button only functions with the music list. Is there a way of getting the button to function when importing movies? Thanks