View of versions in Organizer in PE9 different from prior versions

I just loaded PE 9 (I was using PS 8).
In Organizer in PS8 (and in prior versions) non-version photos in the thumbnail view are all on a dark gray background.  When you modify a photo the stacked version thumbnail then appears as a slide with a lighter gray background.  Thus, it was very easy to distinguish photos that had been modifed from those that had not.  In Organizer PS9 in the thumbnail view, the gray color for all of the photos appears eactly the same (in PS9's Organizer, they look like they are version sets in the PS8 Organizer).  (Note that In both PS8 and PS9, there is the little symbol that apeears in the upper corner of the photo that shows that it is a version set and the little triangle on the right side of the background surrounding the photo is there in both versions - those have not changed.  What appears to have changed is the ability to distinguish quicly, using the background color, modified from unmodified photos!)
So, is there a way to get the same effect in PS9 Organizer? (I sure hope so - if not, the change this would be a huge step backwards.)
Thanks much!!!

Here's what I see in PSE 9:
Here's how I'd like it to look (from PSE 8) - you can see how much easier it is to tell which photos have been modified (and which have not) - when you go through as many photos as I do in Photoshop Elements (probably 50,000 or so per year), it really helps to have things the way they were in PSE8:

Similar Messages

  • Content Transfer - M version is different from A version

    Hi All,
    I am new to BI 7.0 and when i am trying to transfer some cubes from the Bi content to the infoarea; though the cubes are getting transffered successfully but i am getting the message that " M version is different from A version". Does this message makes any difference on the functionality of the cube??
    Also all the infoobjects of the cube are in a Inactive status. Please provide a solution to it.
    Thanks and regards,
    Ankur Agarwal

    A Version - Active version
    D version - SAP delivery version
    M version - Modified version
    Here is a link that describes BI Content Versions:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    Message was edited by: Newbie
            Newbie

  • The version of the LabVIEW NI SoftMotion Module installed on the host differs from the version installed on the RT target.

    Hi,
    i got this problem when i want to deploy the project with softmotion 
    https://www.dropbox.com/s/at9r9w667i00qja/qqqqqq.png
    NI SoftMotion:  The version of the LabVIEW NI SoftMotion Module installed on the host differs from the version installed on the RT target. 

    Hi Eng.Tareq
    It would be better if you can give more information
    1. What is the software version are you using?
    2. What is your target hardware?
    You can check the above information by open MAX -> under software tab of both computer and you target
    I suspect that the software version of your host computer and the target is difference as state in the picture attached.
    TuiTui

  • Oracle spatial relationships works differently from one version to another

    Hi, recently we migrate versión of Oracle, from 11.1.0.6 to 11.2.0.4, and we have some troubles with relationships in Oracle, in previous version the next script return COVERS but in actual version return TOUCH, we have many functions in Oracle using the function SDO_RELATE so its very dificult to change plsql code, my question is why is diferent the logic of relationships with this new version? or we have to do something to configure this?
    I appreciate all the help...
    (the script uses information that is not in the database)
    DECLARE
    PTX1 NUMBER;
    PTY1 NUMBER;
    PTX2 NUMBER;
    PTY2 NUMBER;
    RESULTADO VARCHAR2(100);
    SDO_GEOM_LINEA  SDO_GEOMETRY;
    SDO_GEOM_PREDIO SDO_GEOMETRY;
    BEGIN
       PTX1 := 560144.777960335;
        PTY1 := 1857775.09679448;
        PTX2 := 560141.702578807;
        PTY2 := 1857762.185737;
        SDO_GEOM_PREDIO:= SDO_UTIL.FROM_WKTGEOMETRY('POLYGON((560121.962326818 1857765.46802773, 560123.085106786 1857777.05962037, 560144.777960335 1857775.09679448, 560141.702578807 1857762.185737, 560121.962326818 1857765.46802773))');
        SDO_GEOM_PREDIO.SDO_SRID:=90180;
        SDO_GEOM_LINEA := SDO_GEOMETRY(2002,90180,NULL,SDO_ELEM_INFO_ARRAY(1,2,1),SDO_ORDINATE_ARRAY(PTX1,PTY1,PTX2,PTY2));
        SELECT SDO_GEOM.RELATE(SDO_GEOM_PREDIO,'DETERMINE',SDO_GEOM_LINEA,0.005) INTO RESULTADO
        FROM DUAL;
        DBMS_OUTPUT.PUT_LINE('ELEMENTOS: '||RESULTADO);   
    END;

    This is not true, because the script should return COVERS, the example in script is a polygon and the line that is compared with SDO_GEOM.RELATE is one side of the polygon, following the concepts:
    COVERS: The interior of one object is completely contained in the interior or the boundary of the other object and their boundaries intersect.
    TOUCH: The boundaries intersect but the interiors do not intersect.
    The line is completely contained in the boundary of the polygon, that is why the result must be COVERS not TOUCH

  • Safari tabs in iPad Air different from older versions?

    I realized that the tabs does not show for my iPad Air safari. Instead, a ... icon appears on the right side of each tab, which requires me to click on it before being able to view my tabs. Any idea how to revert it back to the good ole tabs where I can see all my tabs in 1 go?

    1, no, iPads bought in the UK will come with a UK plug. All you need is a plug adapter for it, you don't need a convertor.
    2, warranty isn't international. If it's a wifi-only model then you might be ok to get it serviced in Greece if you have a problem - but you may have to return it to the UK for service.
    3, from Apple no - does your country have import and/or customs taxes ?

  • Is U.S. AppleCare Different from Canadian Version?

    If I wanted to buy a MacBook Air or an iPad as a birthday present for another family member who lives in Canada.
    I have a few questions about puchasing AppleCare or AppleCare Plus and what would be the best path to obtain coverage.
    If I buy AppleCare at the same time I purchase the MacBook Air or iPad in the U.S., will the plan be honored in Canada?
    What are the primary differences between buying the coverage in the U.S. versus Canada?
    What if I decide to buy AppleCare later on, how should that work? I read somewhere that you have to bring the device in for inspection first in order to purchase the coverage. If the person brings it in to the Apple Store in Canada, does it matter if the Apple device was purchased in the U.S?

    Apple has always recommended purchasing AppleCare in the country in which the user lives. Fewer registration hassles that way. The AppleCare plan terms are the same, to the best of my reading. For AppleCare+ for the iPad, you must buy it at the time you buy the iPad or within 30 days thereafter. For the Mac you have until the one-year factory warranty runs out.
    Note that while the warranty on the MacBook Air is international, the warranty on an iPad may not be. It certainly isn't for the WiFi+Cellular iPad. So I'd strongly suggest buying at least the iPad as well as AppleCare for either devices in Canada. You also will avoid any issue of import duties, if any, if you buy in Canada.
    Regards.

  • Lost XSkey from prior version 7

    Greetings
    I have a registered version of Logic Pro 7, and upgraded to 8 when it came out. A year or two has passed, and my laptop was replaced. I tried to load Logic Pro, and I am asked for not only my new version 8 upgrade, but either the XSKey or serial of my old Logic 7.
    I can't find that darned XSkey to save my soul! How do I find the serial number of this version so I can use my laptop's Logic again?
    Thanks

    Logic 7 Pro only has an XS Key, there is no serial number. When they say serial number, they're referring to the Logic Express serial number that you would use if you bought the upgrade from express. But if you bought the upgrade from Logic Pro, you need the XSKey.

  • Can PhotoShop Elements 11 save Organizer Albums in a format PE Version 8 can open/use?

    I haven't found much info on how the Organizer function in PhotoShop Elements has changed from version 8 to version 11.  I've started scanning some photos into PSE8's Organizer, and it works well, but I'm considering moving up to version 11 before doing the bulk of the project.  However, I'd like my sister to be able to use my old copy of version 8 to be able to deal with the albums I'm creating with Organizer, so I need to know whether version 11 can save its Organizer files/albums in a way that is backward-compatible with version 8.
    Anybody know?

    Thanks for the response.  I suspect that you're right about the lack of backward compatibility - I didn't see anyting in the save/backup process that looked like it was giving any option to go backwards, and I would assume that trying to open a catalog with version 8 that was created/backed up by version 11 would not end well.
    I suspect that the thumbnail creation issue was probably caused by the same setting that caused version 11 to copy all of my media files to a new location during the conversion process.  I was trying to make sure version 11 didn't change or write anything to any locations where version 8 was located, and something I did or checked during the conversion process probably caused version 11 to basically start over fresh and have to create all new thumbnails.  It wasn't that bad, and only happened that one time at the beginning - once it was done all the subsequent times I've opened version 11 have had the thumbnails there without delays.
    The biggest time-negative thing I've found so far with 11 has been the time it takes to bring up a clear picture when double-clicking on a thumbnail - I get a full size image pretty quick, but it's blurry - then a few seconds later it finally gets focussed/sharper.  I did just find a way to list the people tags down the right hand side like they were in 8 - they can't be right-clicked and added like in 8, but they can be dragged to the photo to add them so it's almost as good.
    You mention bug fixes and stuff - is there anything that the version 11 organizer actually does better than the version 8 one (in terms of handling bigger image files, or a larger number of files without choking or other such performance/stability aspects)?  I don't use Elements' editing functions (I use regular PhotoShop if I need to edit anything), and I don't use any of the web-sharing or other online aspects of the Organizer, so I'm just trying to compare how the two versions' Organizer works from a purely private, offline image scanning and cataloging perspective.
    Also, the new interface with 11 seems to be eating up almost half of my screen (side to side) - it won't let me make the left hand pane (that shows album or folder view trees) nearly as narrow as it could/should be, and because the old version 8 properties box is now part of the right-hand pane/column in 11 instead of being separately placeable anywhere on the screen, I have to make the right-hand pane very wide to be able to see and type in all the file names, notes and captions, so there's very little room left in the middle for my actual pictures to be displayed.  Are there some interface-changing options I'm missing to try to recapture some of that real estate for my photos to be shown?

  • Modified version is differant from active for ds in test system

    Modified version is differant from active version in test system for ds 0FI_AA_12 (unequal sign close to ds).
    Once I try to load data to PSA , the system generates the following error :
    ds is not replicated
    I replicated ds many times , re-transported it but nothing helps

    Hi,
    After you replicate the datasource,it will become inactive and so you need to activate it again.
    Always replicate first and then activate.
    Hope it clarifies

  • How can I make folder view the default view when I open Organizer?

    I just bought Adobe Elements Photshop and Premier 11.  I spent 2 to 3 hours getting my picture video library into Adobe's organizer.  I had some problems with duplicate picture (that I wanted to be there - so I had to rename them) and a couple pictures with corrupted metadata.  After I got all that sorted out I am a bit miffed about the folder view on Adob'es organizer.
    I love that you can switch to folder view - since this is how I have been organizing my pictures for a long time.  I would like to continue organizing this way for now until I get a grasp on the other ways I can organize them in elements.  However, every time I close and re-open organizer it switches back to the default view instead of folder view.  PLEASE tell me that there is a way to set folder view to the default view!  HELP!

    99jon wrote:
    Perhaps it’s a design feature to speed up the Organizer launch.
    I am sure it is.
    - The normal use of the Organizer is not the folder view, it's the thumbnail view with an organization based on categories and folder. That way you should forget completely where your pictures are stored. Anyway, the folder view in the Explorer is not a map of the location of the different bits of your file, it's only a logical representation. That's easy to see when you are doing a defragmentation.
    - The folder view is useful even for those using normally the thumbnail view, but that is only for rare cases when you must change the folder organization, for instance moving files to another drive. The folder view is here to prevent you from changing things from the explorer and outside of the Organizer.
    - The new folder list view, which you find 'funny' is there to help better organizing using tags. Its huge advantage is that such a view is created extremely quickly by extracting the last subfolder in the media table : it's the way the database sees the folders, based on its own content,  totally ignoring the complex folder organization of your disk with media files or any unrelated other kind of data. You should use it in many cases, the main purpose being assigning tags when you have assigned descriptive folder names. I had suggested such a solution to prevent the long standing bugs in the folder view of previous versions.
    So yes, the purpose is:
    - to speed up switching modes
    - to help folder organization fans to migrate to tags organization
    - to hopefully get rid of the old folder organization bugs

  • Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

    Dear All,
    Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
    I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
    Can you please let me know how to do this or different options available with this process.
    Thanks in Advance for your valuable time...

    A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Design view different from preview  -  is muse still in beta testing

    I have limited experience with coding html so when Adobe released Muse, I was excited. However, I'm wondering if they released it too soon and/or if it is still in beta testing - which I don't mind but would like to know what I'm dealing with. It seems to have a lot of quirks - mainly that the design view is sometimes different from the preveiw or browser view. I spent over an hour yesterday trying to get text boxes to line up. If there is an hidden element affecting the text boxes, I don't see it. I have moved everything off the page and >selected all
    and nothing shows up.
    Other issues:
    Sometimes paragraph styles do not apply - even though in design view it looks like they do.
    Can't find a way to center text vetically in a text box other than adjusting the leading?
    Can't find a way to organize assets into folders?
    When an object is selected on a page, is there a way to indicate that that is the object in the assests panel?
    Sometimes the padding options are not available for no apparent reason.
    Thanks to the Adobe staff for being responsive as these issues are discovered. One staff member in particular was very helpful as I was trying to get hyperlinks to work right. But I am STILL having a problem. The text box and the text itself have the hyperlink style applied but as you can see on the Dardanelle and Chad Lawson Trio hyperlinks - the style did not take even though they are both hyperlinks that point to the right URL.  -- geezermusicclub is the correct link for Dardanelle - It's difficult to see in the pic, but the Dardanelle and Chad Lawson text color is black but the hyperlink text style is brown.
    Persoanlly, I feel Adobe should lower the subcription price while all these kinks are being worked out in Muse. In a way, subscribers are **** a LOT of beta testing for Adobe. Not only are we not being compensated for that, we are having to pay for an application that has too many wrinkles.

    Murray and David: it worked! It is a rare and joyous experience to have a straightforward solution to the sorts of problems I come up with (including other realms). But I have to say that with HTML and CSS (and hence with Dreamweaver), solutions to difficulties have seemed within easier reach than in other parts of the computer world.
    By the way, I wanted to choose "correct answer" for both your posts, but after making the first click it was no longer available for the remaining post--so I typed "helpful" even though that one was correct too.
    Thanks again.
    --Paul

  • Saving as PDF from Excel looks different to Excel version

    Hi
    I have been working in Excel and been saving PDF files for the past year using the inbuilt feature in Excel. I have recently installed Adobe Acrobat so that I could save PDFs directly from Excel instead. When I save exactly the same file from Excel, the adobe acrobat PDF looks different to the excel PDF version.
    I have uploaded an image to show you what I mean.
    http://tinypic.com/view.php?pic=1z1ux6d&s=8
    The image on the left is the correct version, this version was saved using the "Save As PDF" option built into excel. The image on the right is the version saved with the Excel acrobat add-in. You can notice how the font is different on acrobat version, the part where it says "Date" and "Description. You will also notice the black lines above the little card icons do not go right to the end of the line like they should. Each of of them little card icons is a seperate image, does Acroboat have trouble converting these little images or something as they appear fine on the Excel version.
    Is there anything that can be done so converting it to PDF will look closer to how its suppose to look?

    I checked the properties of each file. The Excel PDF version has more fonts listed in the properties section compared to the PDF maker one. I can select the "Date" and "description" and copy and paste it as text but now it appears the text is fine, its showing correctly now even though I havent changed anything.
    The icon problem is still there though.
    I have also attached another image of a close up of the little card icons:
    http://tinypic.com/view.php?pic=nqac9j&s=8
    The version on the right is correct, created within the built in PDF feature in Excel. The version on the left, created with the Excel pdf maker addin.

  • After release the release version different than debug version ????

    Hello guys,
    I am having a HUGE issue with my release build version of my application, when i run my application through eclipse it runs perfectly, however after making a release build of the application and running it behaves different than the version run from eclipse ???????? has anyone ever had this problem before and if so what can you do to prevent this behavior. thank you for any advice on this issue

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • Unify organization names in different languages

    Hi,
    I have registered organizations in the system sometimes while logged in US language (base language), some times in another language.
    This causes that people which are logged in the system in different languages see organization names with different names.
    Is there any way to update hr_all_organization_units_tl table, so that both languages have the same name of organizations?
    Thank you.

    Hi,
    In order to simplify the issue, I thought to avoid the update of the table by neglecting this value while building the reports and use the value from the other language. But I have another problem, when I execute the report, the value userenv('lang') is alwas US (which is base install language) even though I run the report with other language. I see that the business views use userenv('lang') for selecting from this table.
    How can I set the language from the reports?
    thank you.

Maybe you are looking for