View salary details in a single screen in Simulation

Hi All,
InPayroll Simulation is there any way to view the salry details in a sigle screen , insted of going to the drop down and view
SD

Try to run with 'Display variant Rem. Statement' parmaneter populated .

Similar Messages

Employee salary details report

dear abaper ,
please send a HR report in which employee salary details are given.
Thank you sir.
Moderator Message: Warned many times. UserID sent for deletion.
Edited by: kishan P on Dec 23, 2011 1:42 PM

Hi,
1.) Check the RT , generate the WT reporter for the IN period view
2.) Run the simulation document only for this employee
3.) If the RT exist for the current month the posting document will be created
4.) You might be making some error in the selection screen.just run only for this employee
Regards
Hemant V. Mahale

X11 on a single screen in a dual monitor setup

Same problem as posed here: http://discussions.info.apple.com/message.jspa?messageID=2260647&tstart=0
I was excited when I read the following:
I fiddled with Apple's X11, which I'd installed on my Desktop, to no avail. Nowhere could I disable the screen-spanning behavior. On a hunch, I decided to try out XDarwin, however, and lo and behold --- a checkbox for enabling/disabling Xinerama! In addition, XDarwin seems to be better behaved than Apple's X11 when it comes to correctly sourcing some of my $HOME/.X* configuration files (e.g., I always had to run xmodmap ~/.Xmodmap manually under X11, even after putting the command in my .xinitrc).
I only ever use Xquartz(currently XQuartz 2.6.0 (xorg-server 1.9.3)) which is Xdarwin now. But I do not see the mentioned checkbox for enabling/disabling Xinerama.
Which sounds exactly like what I want to do. I want to have my macbook air(mba) to display full screen Xquartz on external 27" Dell monitor only. On the macbook screen I want to show the OSX desktop with open applications not blacked out by X11.
Any pointers to this checkbox's location would be great. Or any other way to configure this setup would also be good.
I'm not looking for solutions that keep the laptop monitor off in any way as I have seen suggested many times. This is because I want to use it to view state of other OS X apps on the macbook screen while working in full screen X session on the external monitor.
The xnest solution sounds inferior for the same reasons pointed out by Michael C. Lee in the post I mentioned above.

Hi Andy,
I really appreciate your help!
I believe you're correct in that I wouldn't be able to start the X server and have it only produce output on one of my monitors, as they are necessarily part of a single "display" (in OS X, at least). Barring that, however, I wanted to be able to at least keep X11 from creating a single screen that spanned both my monitors (the problem with this is that it doesn't recognize the separate monitor geometries, so large chunks of the virtual spanning screen were inaccessible, and it also made dealing with X apps that are none dual-head friendly a pain). On my linux machine, I was able to get this behavior by default (i.e., separate screens named '.0 and .1' under a single X display), and could get monitor spanning only after enabling the Xinerama extension.
I fiddled with Apple's X11, which I'd installed on my Desktop, to no avail. Nowhere could I disable the screen-spanning behavior. On a hunch, I decided to try out XDarwin, however, and lo and behold --- a checkbox for enabling/disabling Xinerama! In addition, XDarwin seems to be better behaved than Apple's X11 when it comes to correctly sourcing some of my $HOME/.X* configuration files (e.g., I always had to run xmodmap ~/.Xmodmap manually under X11, even after putting the command in my .xinitrc).
Anyway, that basically gave me what I needed, so I'm a happy camper. Just thought I'd post this in the unlikely event that someone else is in the same situation. Oh, and if you're curious, the reason I needed to do this in the first place was because I wanted to run the ratpoison windows manager fullscreen --- great for dealing with ADD!

Need to display two ALV GRIDs in a single screen

Hi,
I have a question, i'm using version 4.6. I want to display 2 ALVs in a single screen or by calling.
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 : Display In a single report
ALV1 report (Editable ,Has to be a GRID)
ALV2 report (Non Editable, Has to be a GRID)
(or)
Step 1 : The internal table (which holds the data for the ALVs has to be populated before calling ALV1 or ALV2)
Step 2 :
ALV1 report (Editable ,Has to be a GRID, with a custom button to call ALV2 hiding the ALV1 ie not visible to user)
ALV2 report (Non Editable ,Has to be a GRID, with a custom button to call ALV1 hiding the ALV2 ie not visible to user)
Please help me <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

Hi
ABAP List Viewer
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Regards
Anji

Two ALV Grids in a single screen are overlapping eachother

Hi,
I have created two ALV grids in a single screen. I have used seperate containers for them.
But on executing them , both the ALV grids are overlapping eachother.
Please give me a solution.

Hi,
IF w_custom_container IS INITIAL.
Creating Object for the Custom Container.
    CREATE OBJECT w_custom_container
      EXPORTING
        container_name              = w_container
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6.
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e054. "CNTL ERROR
      WHEN 2.
        MESSAGE e055. "CNTL SYSTEM ERROR
      WHEN 3.
        MESSAGE e056. "CREATE ERROR
      WHEN 4.
        MESSAGE e057. "LIFETIME ERROR
      WHEN 5.
        MESSAGE e058. "LIFETIME DYNPRO DYNPRO LINK
    ENDCASE.
Creating object for the Splitter Container.
    CREATE OBJECT w_split_container
      EXPORTING
        parent            = w_custom_container
        orientation       = 0
        sash_position     = 30
        with_border       = 2
      EXCEPTIONS
        cntl_error        = 1
        cntl_system_error = 2
        OTHERS            = 3.
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e054. "CNTL_ERROR
      WHEN 2.
        MESSAGE e055. "CNTL_SYSTEM_ERROR
    ENDCASE.
Creating Grid Control.
    CREATE OBJECT w_grid1
      EXPORTING
        i_parent = w_split_container->top_left_container.
    CREATE OBJECT w_grid2
      EXPORTING
        i_parent = w_split_container->bottom_right_container.
Building field catalog for ALV.
Fieldcat for the Detail Record.
    PERFORM build_fieldcat        USING: c_1 c_code c_output c_check
                                          c_comcode c_olength,
                                          c_2 c_fileno c_output c_check
                                          c_filenum c_olength,
                                          c_3 c_dedcod c_output c_check
                                          c_dedcode c_olength,
                                          c_4 c_dedfac c_output c_check
                                          c_dedf c_olength.
FieldCatlog for the Error Records.
    PERFORM build_fieldcat_error USING: c_1 c_pernr c_error c_check
                                          c_person c_olength,
                                          c_2 c_desc c_error c_check
                                          c_descp c_olength.
ALV Display.
    CALL METHOD w_grid1->set_table_for_first_display
EXPORTING
   i_buffer_active               =
   i_bypassing_buffer            =
   i_consistency_check           =
   i_structure_name              =
   is_variant                    =
   i_save                        =
   i_default                     = 'X'
   is_layout                     =
   is_print                      =
   it_special_groups             =
   it_toolbar_excluding          =
   it_hyperlink                  =
   it_alv_graphics               =
   it_except_qinfo               =
   ir_salv_adapter               =
      CHANGING
        it_outtab                     = t_error
        it_fieldcatalog               = t_fieldcat_error
   it_sort                       =
   it_filter                     =
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e076. "invalid parameter combination
      WHEN 2.
        MESSAGE e001. "program error
      WHEN 3.
        MESSAGE e078. "too many lines
    ENDCASE.
    CALL METHOD w_grid2->set_table_for_first_display
EXPORTING
   i_buffer_active               =
   i_bypassing_buffer            =
   i_consistency_check           =
   i_structure_name              =
   is_variant                    =
   i_save                        =
   i_default                     = 'X'
   is_layout                     =
   is_print                      =
   it_special_groups             =
   it_toolbar_excluding          =
   it_hyperlink                  =
   it_alv_graphics               =
   it_except_qinfo               =
   ir_salv_adapter               =
      CHANGING
        it_outtab                     = t_output
        it_fieldcatalog               = t_fieldcat
   it_sort                       =
   it_filter                     =
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4
    CASE sy-subrc.
      WHEN 1.
        MESSAGE e076. "invalid parameter combination
      WHEN 2.
        MESSAGE e001. "program error
      WHEN 3.
        MESSAGE e078. "too many lines
    ENDCASE.
ELSE.
    CALL METHOD w_grid1->refresh_table_display
      EXPORTING
        i_soft_refresh = 'X'.
    CALL METHOD w_grid2->refresh_table_display
      EXPORTING
        i_soft_refresh = 'X'.
ENDIF.
Hope it Helps,
Jayant Sahu.

How do you run Multiple Files on a single screen?

Greetings; Please only respond if you've ACTUALLY done this, no opinions requested.
I'd like to run several /.mov/mp4 files simultaneously on a single screen to simulate a 360deg view.
If I start 5 cameras filming simultaneously (front, back, left, right, rover), I'd like to sync the files, then combine the video on a single screen in large crossed thumbnails/2"X2" format. For example; Top, Bottom, Left, Right, Center images...
How can this be done in Premier...?...and then exported to a standard format...?
Again; Please only respond if you have ACTUALLY done this; no opinions please...
Thank YOU

If I start 5 cameras filming simultaneously (front, back, left, right, rover), I'd like to sync the files, then combine the video on a single screen in large crossed
When I did this type of shot before I had to do some tricky stuff....and the hardest part for me was keeping me from shooting the other cameras and those other camera operators, not to mention trying not to see all those reflections of cameras and everything in the car, especially when I flew over the roof on wire ! Eventually I got it done but I had to basiscally use space lights with skirts and diffusion and then tent the car off with silk ( this was in a large football field sized stage )...and then put little holes in the silk for the "lenses"...and then hire a lot of people to walk that silk around as the cameras all dollied on track with the movement of the silk... took forever to get the shot but it was beautiful if you squinted.
good luck !
ps...I when I edited this just like you want to do, with a lot of simutaneous screens within the frame, it looked so 3 dimensional people actually lost their balance watching it !

Paypal Plus Card? Where are my points? View Card Details?

Hi, I signed up and was approved for a Paypal Extras Mastercard. Received it in the mail a few days ago and activated it. I have found there FAQ page to be 100% useless. I don't know if they wrote those answers for an outdated version, but its awful. PayPal should fire every single person involved in the credit card portion of their website design. We're dealing with money. I like to be 100% sure of what is going on. But with this PayPal credit card, I don't have a clue. https://www.paypal.com/webapps/mpp/paypal-extras-mastercard-faq -On the PayPal summary page, it says I have a "PayPal Plus Card"? What is that? I have a PayPal Extras Mastercard, not a "PayPal Plus Card". -There is no "View Card Details" link -There is no "Account Overview" page -Why does it take so long for a transaction to even show up? (3+ days)? Where can I see pending transactions? -Why am I not receiving reward points? That's literally the only reason I signed up for this card. -Why am I still unable to find out when my monthly payments are due? -Why are there no text/email alert options like my other credit card company has (USAA)? -Why does the webpage Title say "Error - Credit Overview" when I click on the arrow to the right of the "PayPal Plus card" (whatever that is)? -There customer support webpages say the following:"Sorry, our online help information is temporarily unavailable. We’re trying to fix it right away. You can use the help links listed here, or try your search later." Awesome. And for what it's worth- I'm not some 95 year old man. I'm very computer literate. And this is probably the first website I have ever had trouble navigating. Before I got this credit card, I was 100% satisfied with paypal. Now I'm just sitting here scratching my head. This website is an atrocity. My frustration is not an exaggeration. I'm trying to build up my credit and I don't want to be **bleep** over due to a poorly designed website. I would appreciate any help.

I feel your pain, I also just got my card. and can't find anyweher online to find my info. I've got two paypal accounts business and personal and neither one has the info. They suck bigtme and they clain to help businesses MY **bleep**!!!!

Addition of a new field "Leave Details" in the LTA screen with dropdown val-ues from Infotype 2001 subtype ITEL. From the current calendar year in ESS

Hi Experts,
we are using portal 7.3 version,Our requirement is addition
of a new field “Leave Details” in the LTA screen with dropdown values from Infotype
2001 subtype ITEL. From the current calendar year in ESS.The new field should
be available only for the claim type LTA claim or claim against advance.
please find the below screen shot and details.
Current View
Component: HRESS_CLMS_WD_EMCR
Personalization: 4370750342A6297CC184E2B07FE6D13E
Window: W_CLM_DYN_UI
View: V_CLMS_DETAIL
Application Component: PY-XX-RS
Kindly help me how to add this field and in which method can i implement code.
Thank you in advance
Regards,
Vanitha

Hi Shankar Reddy,
Business requirement is the new field should display the list entry in Infotype 2001 for the calendar year as selection option for employee. they would like to know ITEL subtype claim,
Example.employee no: EE#9941
As per screen shot you may see for EE#9941 there are 2 Leave requests.
So in the leave details the selection drop down menu option or any other way should be display 2 lines.
Regards,
Vanitha

Display 2 different structured internal tables in single screen using ALV

Hi,
I have two internal tables. Both has different structures. My requirement is to display both the internal tables in single screen using ALV Grid but NOT using OO ALV Grid display.
Is there any way of spliting the Final ALV display screen into two with two different headers and details as shown below.
Header1 for internal table 1
Data of internal table 1
Header1 for internal table 2
Data of internal table 2
Can anyone suggest a better way to display this.
Regards,
Senthil

hi
first think i can say ALV GRID means only for OO ALV it is not possible to display two I.T. data in singr report screen.
better to use of the fm: REUSE_ALV_BLOCK_LIST_DISPLAY
so that u can display both I.T. data in separate report list under single screen
Check the example programs:
BALVBT01 Testprogram ALV: Block list
BCALV_TEST_BLOCK_LIST Program BCALV_TEST_BLOCK_LIST
Regards,
deepak

Viewing Auto CAD file in DMS Screen

Hi,
Our client wants to view Autocad file within SAP DMS Screen (SAP Screen side panel).
As per my study, We need Visual Enterprise Generator (VEG) to view 2D, 3D and few other format files.
VEG will convert CAD files into lightweight format (Viewer format) and it will get stored in the same Content server where the Original stored.
I understand that VEG is not part SAP ECC, we have to get seperate license for VEG.
Is there any other way, will fulfill my requirement?
Else, What is the licensing cost, technical requirements to implement VEG?
Please help me on this.
Thanks,
Ravi

Hi Ravi,
Can you check details on integration in the links below
CAD Integration - Product Lifecycle Management - SCN Wiki
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/hub/uuid/50657fc1-ea1a-2c10-558c-adad9e8620be
Hope this helps.
Regards,
Deepak Kori

Single screen entry (CO11N) configuration.

Hi PP Gurus,
The requirement is to have following elements in Production order confirmation- Single screen entry (Co11N transaction code):
Enter start and stop time on the production order
Enter changeover start and stop time on the production order
Enter setup time on the production order
Enter maintenance time on maintenance order
Enter clean up time on production order
Enter meeting or training time on production order
Enter break time on production order
Reason codes
Personnel no.
Where, change over time= time gap between last case of last production order and first case on new production order on last machine.
Please come back with prompt comments.
Thanks & Regards,
Abu Arbab

Hi V. Suresh,
Thanks for reply.
I think it seems possible through Transaction code OPK0 wherein we got Detail Areas where we can define the elements that we want on Single screen entry confirmation (CO11N). There Free definable detail screens are available. But I don't know how to configure that. Could you please share something on that?
Thanks & Regards,
Abu Arbab

Salary Detail Report

Hi All
During testing and implementation, how can we test the salary details of all employees? Online payslip and SOE is not practical as there are more than 1000 employees. I can view the results using custom package.
Is there any seeded report in HRMS which can be used during testing and development to check the salary details of the employees?
Regards
Rahman

for a shadow run, we often start with a comparison of the net amounts.

Query for Employee Salary Details

Hi,
I have requirement like to generate pay slip using XML Reports. I am unable to get Salary details in my query. How I will get the Salary details (All Element Values), what are all the effected tables.
Thanks
Madhu..

You get alternatively use the pay_balance_pkg.get_value(<pAssignmentActionId>,<definedbalanceid>) to get the Net Payments values
where pAssignmentActionId is Assignment Action id of Payroll Run.
definedbalanceid is Defined Balance Id of <TOTAL_PAY>ASGPTD
<TOTAL_PAY> Can be found from Balance screen whose "Use For Remuneration" flag is checked.

SX80 API Dual to Single Screen

Hi Everybody,
We are currently in the process of revising our AV schematic that is to integrate Extron DTP 84 Cross point and a Cisco SX80 into our system.
The room is to be configured as a Triple-screen room (2 LCD + 1 Projector). I wanted to know if the SX80 provides PIP functionality or is there a need to put into the mix a DVS 605 PIP scaling switcher to enable picture-in-picture of a selected PC source and the output of the VC unit to be shown together on the projector display in various arrangements. Similarly, I wanted to know if within Cisco SX80 API there was a quick way to change from dual display for a dual screen set-up to a single screen setup.
For example our user interface will have the option to choose [LCD] or [Projector] The LCD option would be configured for only Dual display mode– VC on the left side & presentation shown the right screen. The Projector option is to be configured for single screen only and focus more on presentation but has PIP functionality for VC.

As Patrick has said, yes, similar to the older C60/C90, the SX80 can provide PiP functionality using the Video Compositor.
The layouts can be highly customised using the Video Compositor API (see the SX80 API Reference Guide for details), or you can create basic layouts using the TC Console software. Note: that TC Console link doesn't mention the SX80, but the newer versions of the TC Console software (7.1+), do indeed support the SX80.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

In IO7 how can I view my music videos in full screen?

Downloaded IO7 onto my 4S and now I cannot view my music videos in full screen. Why would I pay $3.39 for a music video from the iTunes store when I can't view the videos in full screen. The video player does it but you can't create playlists, repeat etc so that is not an option.

I do not understand what you want to do. Please rephrase the question.

View salary details in a single screen in Simulation

Similar Messages

Maybe you are looking for