Viewing images from file manager in C5-00.

When I open an image in file manager it does not open. An image viewer opens but does not display the image. Then I've to restart the phone to get rid of image viewer from open apps. Does anyone has the same problem? Any solutions? Firmware version:  071.005

Does any image cause this (including camera pictures), or just some?  Do the images display normally in Gallery?  What about images stored on the phone (temporarily change the camera's memory setting and snap a photo) vs. on the memory card?  For this test, you may want to temporarily remove the memory card.
I am hoping you'll find that images stored on the phone display everywhere 100% normally, which would mean some corruption on the card.  If so, back up any important card data, connect the phone to a computer with USB and Mass Storage mode (or use a separate card reader), and check the card for errors in the same way you would check the hard drive.  If the computer can find and fix the problems, then hopefully the issues are solved.  If not, you may need to reformat the card (as FAT32).  Worst case scenario is that the card could be going bad.  I hope that helps!

Similar Messages

  • How to view images from application's path?

    Hello,
    I am using the codes below to view images from an ACCESS database listed as ".\image.png", the images are included in the application's path. I'm able to view the images while running crystal reports alone; However when I include the same report and databse in my VB.NET application, the images don't show. I was told that the report looks for the images in a temp folder, an alternative solution would be to copy the image files to a temp folder before attempting to run the report, but so many things can go wrong with such approach. Do you have a better solution to this problem?
    Thanks in advance.
    Victor
    Code:
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
            Dim myaop6viewer As New aop6viewer
            Dim myaop6report As New AOP6V2
            Dim crConnectionInfo As ConnectionInfo = New ConnectionInfo
            crConnectionInfo.ServerName = (Application.StartupPath & "\AOP6V2.mdb")
            crConnectionInfo.Password = "testaop"
            setDBLogonForReport(crConnectionInfo, myaop6report)
            myaop6report.RecordSelectionFormula = "isnull({image.country}) = false"
            With myaop6viewer
                .CrystalViewer22.ReportSource = myaop6report
                .Show()
            End With
            myaop6report = Nothing
        End Sub
        Private Sub setDBLogonForReport(ByVal connection As ConnectionInfo, ByVal report As ReportDocument)
            Dim mytables As Tables = report.Database.Tables
            Dim mytable As CrystalDecisions.CrystalReports.Engine.Table
            For Each mytable In mytables
                Dim mytablelogoninfo As TableLogOnInfo = mytable.LogOnInfo
                mytablelogoninfo.ConnectionInfo = connection
                mytable.ApplyLogOnInfo(mytablelogoninfo)
            Next
        End Sub

    I tried following your suggestions, but I'm unable to link to the image file from the application, can you please help me link to the image from the application.
    1. Created a formula name test with the folowing data:
    ".\test.png"
    2. In the Gphics Location, entered:
    {@test}
    3. Below is the code in my application
    Imports System.Data.OleDb
    Imports Microsoft.VisualBasic.ControlChars
    Imports CrystalDecisions.Shared
    Imports CrystalDecisions.CrystalReports.Engine
    Public Class Form1
        Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
            Dim myaop6viewer As New aop6viewer
            Dim myaop6report As New AOP6V2
            Dim crConnectionInfo As ConnectionInfo = New ConnectionInfo
            crConnectionInfo.ServerName = (Application.StartupPath & "\AOP6V2.mdb")
            crConnectionInfo.Password = "testaop"
            setDBLogonForReport(crConnectionInfo, myaop6report)
            myaop6report.DataDefinition.FormulaFields.Item("@test").Text = "path + picture name" '???????
            myaop6report.RecordSelectionFormula = "isnull({image.country}) = false"
            With myaop6viewer
                .CrystalViewer22.ReportSource = myaop6report
                .Show()
            End With
            myaop6report = Nothing
        End Sub
        Private Sub setDBLogonForReport(ByVal connection As ConnectionInfo, ByVal report As ReportDocument)
            Dim mytables As Tables = report.Database.Tables
            Dim mytable As CrystalDecisions.CrystalReports.Engine.Table
            For Each mytable In mytables
                Dim mytablelogoninfo As TableLogOnInfo = mytable.LogOnInfo
                mytablelogoninfo.ConnectionInfo = connection
                mytable.ApplyLogOnInfo(mytablelogoninfo)
            Next
        End Sub
    Thanks,
    Victor

  • How to view Images from Filesystem in Apex?

    hello,
    i want to view images from a network share (e.g. \\10.67.125.22\CREATIVES_DE\PRINT\THUMB\2009\06\002259044s01.JPG don´t nedd http access because it´s only intranet) in an image column of a table. unfortunatly i can´t upload them all into apex because i have really much data. i´m talking about serveral terabytes. i also want to link to videos on a network share but apex always inserts "http://ham-v000002:8080/apex/" in front of the link from the database...
    can someone help me out?
    greetings
    Sebastian

    i´m getting closer...
    apex stopped inserting the localhost-string as i put "file://" in the "src" attribute. But now i´m dealing with odd slash-adding from apex.
    the value located in the #THUMB# variable is like this:
    \\10.67.125.22\CREATIVES_DE\PRINT\THUMB\2009\06\002268162s01.JPG
    and here´s what apex returns on "<img src="file://#THUMB#">":
    file:////10.67.125.22/CREATIVES_DE/PRINT/THUMB/2009/06/002268162s01.JPG
    and the same with three slashes "<img src="file://#THUMB#">"
    file://///10.67.125.22/CREATIVES_DE/PRINT/THUMB/2009/06/002268162s01.JPG
    if i just do "<img src="file:#THUMB#">" (which should return the correct path), oralce cuts away the ip-adress:
    file:///CREATIVES_DE/PRINT/THUMB/2009/06/002268162s01.JPG
    i don´t know what´s wrong here...
    greetings,
    Sebastian

  • Unable to view output from concurrent manager

    Hello all,
    I am unable to view output from concurrent manager, I am using IE 8 32bit on Windows 7 & adobe 10.0.1
    It gives a blank page
    We are trying to view an xml report
    EBS 11.5.10.2
    db : 10.2.0.
    linux 4 update 5
    I have already reffered below documents but for no luck
    Note: 888932.1 - R12.1 Unable To View Output For Xml Outputs - View Output Button - The window opens up And Disappear Automatically
    Note: 305850.1 - Unable To View Output Of PDF Report When Clicking ''View Output''
    Thanks.

    Is the issue with XML/PDF concurrent requests or with all requests?
    Can you find any errors in Apache/Database log files?
    Is the application listener up and running? Can you find any errors in the listener log file?
    Have you tried to run AutoConfig and bounce the services and see if this helps?
    Thanks,
    Hussein

  • HT4106 Will the camera kit allow you to view images from a usb flash drive?

    Will the camera kit allow you to view images from a usb flash drive?

    You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
     Cheers, Tom

  • View image from local

    Hi,
    I'm using J2ME wireless toolkit, and I want to know is it possible to view image from local(eg. C:\WTK22\appdb\DefaultColorPhone\filesystem\root1). I've written some code to view form the folder but it appear "error: null".
    mage storedImage = null;
              String picLink = "file://localhost/" + currDirName + fileName;
              try{
                   storedImage = Image.createImage(picLocation);
              catch(Exception e){
                   System.out.println("Error here: " + e.getMessage());
              }

    Yes, it is possible.
    They were demonstrating the RT display at NI Week. It is part of the RT features of Vision 6.1. You can route an IMAQ display window to the video output on the PXI chassis. Anything you display in that window will show up on your screen.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • Printing from file manager in Solaris 10

    Is is possible to print from file manager in Solaris 10, I can print from the command line but not from file manager, when I try there is no output lpstat shows nothing and no error messages. Latest patches are applied as of 14/04/08.
    Edited by: its_mallen on Apr 15, 2008 5:37 AM

    I've found I can print as root but a user can't, wondering if there are any special privilages, I've found an allow and deny command but they can print from the command line so not sure this will fix the problem

  • Read image from file

    Dear all,
    I would like to know how to read a gif or jpeg image from file to a binary stream?
    So that I can transfer through the internet using a http POST request.
    Thank you very much.

    Use FileImageInputStream.. See api docs for further reference
    Cheers
    -P

  • How to read some images from file system with webdynpro for abap?

    Hi,experts,
    I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
    How to read some images from file system with webdynpro for abap?
    Thanks a lot!

    Hello Tao,
    The parameter
       icm/HTTP/file_access_<xx>
    may help you to access the pictures without any db-access.
    The following two links may help you to understand the other possibilities as well.
    The threads are covering BSP, but it should be useful for WebDynpro as well.
    /people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
    http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
    Best regards
    Christian

  • Can load image from file using LabVIEW and display on IMAQ graph?

    I dont have IMAQ Vision for LabVIEW on my computer. Is it possible to load image file and display on an IMAQ graph?
    Thanks!

    Hey werwr,
    In response to: "I dont have IMAQ Vision for LabVIEW on my computer. Is it possible to load image file and display on an IMAQ graph?"
    As of right now, in order to read an image from file, you actually do need the IMAQ Vision software. The IMAQ driver without the Vision VI's will allow you to collect images from a framegrabber, and it will allow you to save those images to file. But the function that allows you to read an image from file does require the Vision VI's. Once you have the VI to read images from a file, you will be able to display the image on an IMAQ "Graph" or otherwise known as an Image Display.
    I hope this helps. Please let me know if you have any further questions.
    Thanks,
    DJ
    Applications Engineer
    National Instruments

  • Setting bind variable for a view object from the Managed Bean

    Hi,
    i am using JDeveloper 11g, i have to create LOV in the JSF. To show the LOV, it has to populate data using View object and its query parameter need to be sent from the Managed Bean.
    For the View object i want to set the bind variable parameter from the managed bean value. bename is stored in a managed bean (session scope)
    #{beantest.bename}
    But it gives the following exception.
    JBO-29000: Unexpected exception caught:
    org.codehaus.groovy.control.MultipleCompilationErrorsException,msg=startup failed, Script1.groovy: 1: expecting '!',found '{'@ line1, column 2.
    I have followed the link http://kr.forums.oracle.com/forums/thread.jspa?threadID=615474 like Frank wrote on 8.2.2008:
    But steps are not clear.
    How to input the VO bind parameter with Managed bean variable?
    Any Help
    Regards
    Raj
    Edited by: user9928180 on Dec 17, 2008 9:51 AM

    Hi,
    a bind variable in a VO needs to be exposed as an executeWithParams operation in the pageDef file. Just add a new action binding to the pageDef file (context menu) and select the executeWithParams operation on teh VO. Then in the argument field, reference the managed bean property for the value
    Frank

  • How to view images from Pictures Folder using iPhoto?

    Right now when I click an image in the Pictures folder, the image is automatically opened using Preview. I want to view images directly from my Pictures folder, and have them open to iPhoto. Is that possible?
    I just want to be able to view/sort my photos by Folders rather than by Events, Titles or Photo dates. I can't seem to get them to sort by folders in iPhoto.

    Iphoto is a Photo Database designed to allow you to organise and manipulate you photos without recourse to your files.
    It's not an image viewer, it can only work with photos that have been imported to the database.
    I just want to be able to view/sort my photos by Folders rather than by Events,
    An Event is a folder of images with a fancy icon. You can organize your pics in iPhoto anyway you want, using Albums, folders, keywords and so on. It's far more flexible that using folders in the Finder.
    You can opt to organise the files yourself, rather than have iPhoto do it for you, but I don't recommend it.
    Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
    Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
    However, you need to be aware of a number of potential pitfalls using this system.
    1. Import and deleting pics are more complex procedures
    2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
    3. Most importantly, migrating to a new disk or computer can be much more complex.
    Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
    If disk space is an issue, you can run an entire iPhoto Library from an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    Regards
    TD

  • View images from enhanced podcasts on AppleTV (2nd gen)

    Is there a way to view the images embedded in enhanced audio podcasts through AppleTV? I listen to a number of photography podcasts that discuss particular images but the audio isn't much good if I cannot see the image. Thanks.

    An example would be any audio podcast of the Martin Bailey Photography Podcast or the History of Photography podcast by Jeff Curto... Is there a way to view the images embedded in enhanced audio podcasts through AppleTV?
    Okay... I selected the Jeff Curto "Photo History - Class 6 Spring 11 - Photography and Painting" podcast for test purposes. The easiest way to view this specific file on the TV2 device seems to be to simply lie to iTunes.
    1) Download the podcast in your normal manner.
    2) Delete the podcast from iTunes and send it to your trash can.
    3) Drag the file back to your desktop.
    4) Change the M4A (".m4a") file extension to M4V (".m4v").
    5) Re-import the file to your iTunes library.
    Your audio podcast will now load/play on the TV2 as if it were a video podcast.

  • Viewing Images from Database using JSP/ SQLJ

    Dear Friends,
    I could manage to write an image into a BLOB Field in the Oracle
    Database. I could even manage to read that image from the
    database but i am doing it by reading the BLOB data and writing
    it into a file with 'gif' or 'jpeg' extension.
    I would like to know how to read the BLOB data dynamically in
    cache and display it on the JSP page in the browser without
    creating a file on the disk.
    Thanking you,
    Sarwottam

    Thanks for replying,
    Can you please elaborate on your suggestions ?
    If possible can you provide a sample code that would help me understand better?
    Thanks again.
    Sarwottam

  • Cisco Prime Infra 2.1 fails to import an image from file

    We have a standard Cisco Prime Infrastructure 2.1 install. The software repository has been built up by importing the IOS images from the discovered network devices. To implement netflow capabilities on some 3750X switches we need to upgrade the IOS on the chassis and the NM card C3KX-SM10G. I was able to download from Cisco Support the 3750X IOS .tar file and import it from my machines local file system. However, the modules tar file c3kx-sm10g-tar.150-2.SE6.tar fails on the upload from my local file system. When I look at the import rob results they are as follows:
      Image collection from source     SUCCESS
      Copying Image to Staging Location     SUCCESS
      Copying Image to Repository     FAILURE
    I've tried to import just the .bin file but this also fails at the same stage as above.
    I've also tried to scp the file directly into the backend file structure with no success into the folder /opt/CSCOlumos/conf/ifm/swim/jobs with the other images (oddly noticed the above .tar file for the 3750X isn't listed with the other .bin files - although is available through the webGUI).
    I need to distribute the NM .tar file across multiple switches and I'd prefer to use Cisco Prime for the job. Any help would be gratefully received.
    Thanks.

    I had (still have?) the same problem with it not copying the image over. I put in a ticket and they told me to upgrade to Prime Infrastructure 2.1-Device Pack 4  pi_2.1device_packs_4-40.ubf which helped but it still fails sometimes.
    I had read a post from another thread about going through software image management to distribute and that seems to work a little better, but still fails sometimes. 
    So I think that there are still quite a few issues in Prime that need worked out.
    We have over many switches that need software upgrades and I was hoping to do it quickly through Prime but I don't want to send out more then one image at a time to switch because I don't want it to fail. So it's a drawback right now, just doing one at a time to make sure it takes.

Maybe you are looking for