Vintage dv7t-4000 WV703AV maxumum hard drive configuration (has 2 OEM drives)

I still have a vinage dv7t-4000 WV703AV it has 320Gb+320Gb hard drives since it was born. With the exception of the hinge which broke as as result of it just sitting opened on the counter it's still ok :-)
What are my HD replacement options?
Can I add 500Gb or 1Tb Primary and keep old 320Gb Secondary or should I upgrade both with similar size HDs (500Gb+500Gb, 1Tb+1Tb)?
Or I should add 500Gb or 1Tb Primary and remove the unequal-sized Secondary one?

Hi,
Do you use RAID or they are two separate HDD's ? Its original options: 250Gb x 2, 320Gb x 2, 500Gb x 2, 640Gb x 2 or 750Gb x 2:
http://partsurfer.hp.com/Search.aspx?SearchText=WV703AV
You can swap to 1TB x 2 now or what ever combination given it's not using RAID.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Dv7t-6100 quad second hard drive

I have just bought a dv7t-6100 cto quad edition notebook, and I really love it! I'd like to add a second hard drive, and the caddy is already installed. I think I need a cable, though.
Can anyone give me a part number?
Thanks in advance.

Hi:
It looks like you have to order the whole hard drive kit:
Hard Drive Hardware Kit (not illustrated, includes bracket, connector cable, shield, and screws) Part # 641306-001
See chapter 3 of your service manual for the illustrated parts catalog. I found the above part on page 30.
http://h10032.www1.hp.com/ctg/Manual/c02842278.pdf
Paul

2nd hard drive for HP Pavilion dv7t-4000 CTO Notebook - What do I need?

Hi, I have the HP Pavilion dv7t-4000 CTO Select Edition Entertainment Notebook (Product # WV703AV). It has room for two harddrives but only came with one. What would I need in order to install the second hard drive? Would I need just a connecting cable or do I also need caddy or kit?
Also, could I get a solid state? Would my notebook support that or does it only use regular ones?
Currently, I'm running Windows 7 64bit. I've got a 500GB hd (which came partitioned with hp tools/recovery).
Any help with what I would need for a traditional hdd or ssd would be greatly appreciated. I tried to look through other people's posts first, but couldn't find anything specific to my model. Thanks for your time!
This question was solved.
View Solution.

Hi:
The only place I know of where you can get a 2nd hard drive kit is from this vendor.
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345
Your notebook should be able to work with a SSD but I cannot guarantee it.
I really don't see any point in adding a SSD unless you make it the primary hard drive, and in order to do that, you would need to get a SSD the same size as the original 500 GB hard drive to use the recovery disks to reinstall the operating system.
Most folks get smaller SSD's and they use the W7 product key to activate a plain installation of W7.
If you can read all 25 characters of your windows 7 product key you can make your own installation media and use that to install Windows on a smaller than 500 GB SSD.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link below. You need a 4 GB flash drive to use the USB method of compilation.
http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/

HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive Replacement

Hello,
I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC and I had had hard drive issues from within warranty period. i.e. I purchase in 2010 and had a hard drive replaced in 2011 and again in 2012. Next time it failed in 2013 (almost 11 months apart on an average).
Last time when it failed, the warranty had expired so I thought of giving it a few try e.g. running thru bad sector fixing/writing-off softwares from seagate, Toshiba....this got me out of Smart Drive Error.
I have been using the HDD for sometime now but want to be prepared for the next round and I'm sure it'll be gone for good the next time.
Current HDD is 640GB, 7200 RPM Hardrive (replaced in 2012). HP Part# 621046-001.
When replacing, can I use ANY 640GB hard drive? Can I use a hard drive that is larger than 640 GB? Different RPM?
Any suggestions about hard drive?
The recovery discs I had received with the replacement drive did not work correctly. I had to use the first set I had created right after I purchased the laptop.
Thank you.
--Pratik Patel
This question was solved.
View Solution.

Hi Pratik Patel
According to product manual:
Your system supports SATA 9.5mm or 12.5mm , 2.5" HDDs
supports upto 2 hard drives
supports SSD too.
Single hard drive configurations supported:
250GB, 320GB, 500GB @7200RPM @9.5mm
640GB @5400RPM @9.5mm
750GB, 1TB @5400RPM @12.5mm
160GB SSD
If you want dual hard drive configurations, please click following link (user manual):
http://h10032.www1.hp.com/ctg/Manual/c02666747.pdf
But, there is not hard fast rules that only 5400rpm can be used instead of 7200rpm, which was used to replace your earlier hdd.
hope this has helped you.
thanks
Visruth
**CLICK 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH SAME PROBLEM**
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Question - Need Advice Regarding Second Hard Drive On HP Pavilion dv7t-4100 Notebook PC

Hi,
I currently have a HP Pavilion dv7t-4100 Notebook PC, and my hard drive failed (luckily while still under warranty!). So I contacted HP support and they are in the process of sending me a replacement hard drive, so that I may install it. When I opened the back of the notebook, I realized that a second hard drive could be installed, if desired. I would be interested in doing this! My current primary drive was (and will be again) a Toshiba 1 TB Internal hard drive Serial ATA-300 2.5" 5400 rpm, model MK1059GSM. I understand (from reading a previous post) that for the second hard drive, I will need to purchase a "2nd HDD Caddy & Cable for HP dv7-4000, dv7-5000, dv7t SE" (the purchase link the tech in the other post referred to was http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345); and now I need to decide on the size (and other stats) of the hard drive that I will buy to install and used as the secondary drive. The HP customer service rep I spoke with on the phone about my primary drive replacement said that it is usually recommended to not go any higher (in capacity) than the primary drive, for the second drive, to ensure a more "stable" system (but I am not sure about the level of"technical" knowledge he has about the inner workings of the notebooks). However, from my upgrading experiences with desktop PCs, I was usually able to go as high in capacity as I could/desired; as long as the physical size of the drive was the same, and it was compatible with my system. And I usually did choose to go with a larger capacity second drive, as this was where most of my data and media files were stored (with the primary being used for mostly operating system and system files). This is my first time "upgrading" a Notebook, so I wanted to check with the techs here on the board- would it be a problem for me to go with a secondary drive larger than my primary drive's 1TB capacity? Also, are there any other factors to consider and keep in mind when selecting a second hard drive? Any advice and replies will be greatly appreciated. Thanks so much for your help with this! -Brian

You should be able to go as high as 2TB.
I also own a,(Older), DV7 notebook which has dual drive capability.
I bought my caddy from the place recommended and got everything needed including screws !
I matched the capacity in mine with an exact same hard drive and have never had a problem.
Minor battery life noticable but that was it.
Your system BIOS is what will hold you back from say a 3TB drive.
You can go to HP site and check the specs on your model and find out for 100 % sure.
HP Support & Drivers | United States
I would recommend doing what I did and match the drive exactly.
Good day !

Pavilion DV7t-4100 hard drive upgrade fail

Hello all, thanks for taking the time to read my question. I'm stuck in the process of upgrading and HP Pavilion DV7T–4100 laptop. The machine is a couple of years old runs Windows 7 and came originally equipped with two Toshiba 300GB hard drives. The hard drives are configured for one drive,C:, to host the operating system the second drive,D:, to host data. The D drive has now run out of room. I have purchased a Samsung spinpoint 2TB hard drive in order to have more space, but what I thought would be an easy upgrade turned into many long hours and frustration, not to mention funny looks from the wife.
Here is what I've done to date:
1. Connected the new 2 TB hard drive to the computer via USB (Windows recognizes hard drive)
2. Cloned the D: drive onto the new hard drive using Seagate disc wizard (also tried mini tool partition wizard) maintaining the original partition size.
3. Turned the computer off, removed the D drive and installed the 2TB drive in its place.
4. Restarted the computer only to find that Windows would not see the new drive. Attempted to find a drive-by going to computer management /storage/disk management where was not present either. Rebooted the computer once more, went into BIOS where I discovered that it does not see the new drive. BIOS does not have an option to discover new hardware.
5. Suspecting a bad drive, bad cable, or other bad things, I replaced the original D: drive back. Everything seems to work fine. The computer sees the original D: drive through SATA and the replacement drive through USB. Leaving me where I started, still out of room....
6. Following new advice, I reformatted to drive with just a single volume and no data in it. I didn't want to drive via SATA but neither bios norwindows and see it.
My question is: How do I get the BIOS to recognize the replacement hard drive, so that windows will recognize the replacement hard drive, so that my wife won't recognize I'm an idiot?

Hi
You're welcome
Few things:
Update bios & chipset from your product download site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4317...
Now put the new 2tb hdd & check
If no joy, don't remove it - go to disk management , take a screenshot & please post it here.
Now power off, wait - then power on again - go to bios setup & boot device options to check if you can see the 2tb hdd in anywhere here.
If no joy, proceed & shut down - take out 2tb and connect it via USB , power on - go Disk Management - take a screenshot and please post it here.
Hope you have formatted previously the hdd from Disk Management by right clicking the hdd in the lower graphical console - New Simple Volume -> format, Am I correct?
Also, please post the model number/name of both Toshiba 300gb old hdd & the new 2tb Seagate hdd.
AT LAST,
Just blow out with dry canned air - the sata port of second hdd bay , after shutting down laptop completely & after doing a hard reset.
And try connecting 2tb hdd again and check.
Also, can you check if the 2tb hdd is working by testing it in another laptop by connecting via sata.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Was advised to delete system configuration file from hard drive and now computer will not start - any help would be appreciated.

Downloaded Yosemite and since then cannot connect to internet or bluetooth mouse - was advised to delete system configuration file from the hard drive and since then cannot start up computer. Any help would be appreciated - cheers.

Boot the MBP with the OPTION+COMMAND+R keys down. The result should be a display showing a revolving globe. By following the instructions, you will be able to reinstall the original OSX. Then you may reinstall Yosemite.
A solid Internet connection will be required.
Ciao.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

Can the 2 internal hard drives in the dv8t be configured as a raid 0 array?

I know the intel chipset supports (PM55) supports raid 0 but does the HP dv8t bios allow a raid configuration for the internal drives?

HM, here is the 'Service and Maintenance Guide' for your computer:
http://h10032.www1.hp.com/ctg/Manual/c01910942.pdf
In the section titled 'Product description', it tells about the two hard drives, but mentions nothing about RAID. Therefore, I believe that it is not supported.
Message Edited by old_geekster on 11-03-2009 08:36 PM
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Vintage internal hard drives

I have a mac pro from 2006. This is considered vintage. the internal hard drive is missing.
I have dealt with several on line shops that give me several different hard drives I can have intalled
but the mac repair shop stated that I had to be sure of which one to purchase because if it
is not the brand that was used originally it could cause a problem & there may be compatibility issues.
Does anyone have any suggestions or knowledge is it a toshiba, seagate, western digital.
HELP. If not would the computer work fine with just an external hard drive it also needs an operating
system installed.
Thanks

Someone gave you bad information. You can put any 3.5" SATA hard drive in the 2006 MP up to 2TBs per drive. The best drives would be Hitachi. Do not use any "green" drives.
You can install the original OS from the discs that originally came with the computer up through Lion 10.7.5. I would suggest using Snow Leopard.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

New Hard Drive Won't Configure

I just bought a new Hard Drive (Crucial 256gb SSD) and physically installed it. However I am having problems configuring it. When I C or option boot and go to Diskutil and erase/partition the drive I get the same error: "POSIX reports: the operation could not be completed. Could not allocate memory. The drive shows up in my Diskutil manager and its S.M.A.R.T. status is verified." I don't know what to do, please help. Thanks

It was not your internal drive that failed or the SSD that has the problem. It is, more then likely, the cable that goes from the drive to the logic board that has failed. Replace that cable and I bet the original drive will work and you will not get that error when you try to configure and install OS X on the SSD.
I bet you have a 2009 model Macbook Pro. Is that correct? Apple used Cheap cables on that year MBP.
If you do a search you will find many have had to replace that cable.

How do I get COnfigurator to use my external Hard drive?

I have a Macbook Air with a really dinky hard drive with which I am supervising 100+ iPods and other devices with Apple Configurator. I filled up the hard drive after six months with Configurator stuff. I bought a 2 Tb passport that I hooked up to the macbook and it immediately showed up. Will the Macbook automatically start adding new files for Configurator onto the external drive as if it were additional space on the hard drive? Will I have to move Configurator to the external hard drive? How do I go about doing this?

disclaimer: I do not know here apple configurator save the data. I assume it saves the data in the home folder of the account on which it is run. ~/Documents is most likely.
1) I'd move our home folder of account you run apple configurator under to the external hd. Here is how:
http://www.macworld.com/article/1164891/keeping_mac_os_and_data_on_separate_driv es.html
( your going to have to scroll down a bit. there are a lot of ads on the above page. look for "Keeping Mac OS and data on separate drive
You could create another account for daily office use when you do not have the external hd attached.
2) another option would be to copy your entire "hd" to the external hd & boot from the external hd.
fyi: Holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!
Give SuperDuper a workout on your own system. Clone to your heart's content — for free. See what else is possible. When you're convinced that SuperDuper is a terrific solution — and a great value at $27.95 — you can register right from the application and start using its advanced features immediately!
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
here is some more info on the subject.
https://discussions.apple.com/message/21650443#21650443

Adding and configuring a second hard drive in a Power Mac G4

I am using a Power Mac G4 with the original 20GB hard drive and running OS 9.2.2.
I would like to upgrade to 10.4 (Tiger) installing it on a 80 GB Seagate Ultra/ATA 100 which I need to install as a second hard drive.
This is where my problem arises. From what I have read I cannot install OS 10 on a drive configured as SLAVE. On top of this Apple article ID 106728 has a note not to “change your Apple –installed disc drive to ATA ID-1 (slave) when adding other ATA devices.”
Is this article correct or am I misunderstanding it? I was hoping I could just install the new drive on top of the original and switch the configurations of the drives making my original drive the SLAVE and the new drive MASTER and just install OS X on the new 80GB drive.
Or can I put the new drive in the position of my original drive configure it as MASTER and put my original 20GB drive above it and configure it as slave?
I am hoping someone can let me know if these configurations will work.
Another question is: If I switch the position of my original drive will I lose access to the data on it?
I would like to keep the OS systems on separate drives because I need to continue to run my old software and Heidelberg scanner (SCSI, running on LinoColor Elite 5.1 for which updated drivers are not available). This will not be possible in classic. I want OS X on the larger drive as I will be loading updated software eventually and it will become my main OS system.
Power Mac G4 450GH, 768mb ram (AGP graphics ) Mac OS X (10.4) Currently running 9.2 and will be upgrading to OS 10.4

Hi, Thelisa -
Welcome to Apple's Discussions.
Is this article correct or am I misunderstanding it?
Yes, to both - the article is correct, and yes, you seem to be misunderstanding it.
In the context of the article, "Disc drive" does not mean a hard drive. Earlier in the article it states -
Solution
"Disc drive" refers to CD, CD-R, CD-RW, DVD, DVD-RAM, DVD-R, Combo drives, SuperDrives.
The reason is that on most (if not all) G4s, an optical drive must be jumpered as Master in order for it to be a bootable drive. So, if an optical drive has been jumpered as Slave, it can not then be used to boot from the OSX Install disk.
You will need to place the drive to be jumpered as Slave in the top position of the bracket (the drive sled), and the one jumpered as Master in the bottom position of the sled.
The reason for this is the location of the connectors on the IDE ribbon cable (the data cable) - the one jumpered as Master needs to be attached to the end connector of the cable, and the one jumpered as Slave to the middle connector of the cable.
Because of the physical limits of the cable itself, the one jumpered as Slave must be on top, else the connectors won't reach to the proper drive.
Which drive is jumpered as which is your choice, but the one jumpered as Slave must be on top.
If I switch the position of my original drive will I lose access to the data on it?
No.
The designation of Master or Slave is, for the most part, simply to allow the Mac to have a unique physical address for each drive, so it can tell one from the other (this is separate from the pathname addressing that the OS uses). Re-jumpering a drive nor changing its physical location will not affect its contents nor their usability.
One result that may be important sometime is when the machine in question is set up as the Target machine in a firewire Target Disk Mode arrangement - only the drive jumpered as Master will be visible on the Host machine.
Article #58583 - Firewire Target Disk Mode

How to add and configure an additional hard drive.

I will like to know how to install and configure an additional hard drive. I will like to know how to configure the server so the services will start using this additional space. Intel based Xserver. late 2009.
Erik.

Your question is a little vague... "services will start using this additional space..."?
Let's see, where to start.
You don't say how many drives you currently have in your server. If all three drive bays are used then you'll probably need some kind of external array. There are many to choose from.
If you have a spare bay (or two) then you can buy a new drive bay (ADM - Apple Drive Module) (several online vendors still sell them), but you can't just put a bare drive into an empty bay since the blank trays lack the electrical connectors to support a drive.
Once you work out your drive options (internal vs. external, capacity, etc.) you can work out a plan to use them.
The specifics of that will depend on what services you're using. Are you web serving? file serving? home directory serving? or maybe mail? database? something else.
In general, once a drive is attached and initialized (via Disk Utility.app) it's up to you to configure the individual server components to use the space. That typically involves changing some kind of configuration parameter (e.g. httpd.conf for apache, /etc/my.cnf for MySQL, or various options in Server.app for other services) to tell them to use the new volume.
If you want to migrate the entire server to the new drive (e.g. the new drive is larger/faster) then you can clone your existing OS drive to the new drive and just reboot.
So, you see, there are many ways to do this. Everyone's situation will be a little different.

How to configure Time Capsule to add another 2GB of storage via USB External Hard Drive?

Hi All, I've recently added an external 2GB hard drive via USB to my 1GB Time Capsule as I had reached capacity. Time Capsule recognises the new 2GB hard drive so I know I have got that at least that bit right! But... I cant seem to figure out how to configure TC to add the extra 2GB to the current 1GB it already has for a total of 3GB? Under 'Select Disk' I can select either one or the other but I can't find a way to 'merge' them both. So a couple of questions:
- Is this even possible?
- If I have to keep them seperate, is there way to select different folders to back up to the different drives? E.g. back up all my music files to one of disk and all my movie files to another? I tried it but is seems like the options apply to time capsule regardless of the drive I select.
Any assistance you can provide would be most appreciated.
Regards, Justin

- Is this even possible?
Sorry, but no. You will not be able to combine the drives as one as the Time Capsule does not offer any type of RAID function.
- If I have to keep them seperate, is there way to select different folders to back up to the different drives? E.g. back up all my music files to one of disk and all my movie files to another? I tried it but is seems like the options apply to time capsule regardless of the drive I select.
Not directly with Time Machine (TM). You would need another backup solution, and then, run two separate backups (with the specific folders of interest); one on each HDD.

Vintage dv7t-4000 WV703AV maxumum hard drive configuration (has 2 OEM drives)

Similar Messages

Maybe you are looking for