VIPCA fails
When I install CRS on AIX 5L with HACMP (concurrent mode), I have a problem when run root.sh script on node 2: " The given interface "en4" is not public.
Public interface should be used to configure virtual IPs".
Now, I read Oracle Cookbook and follow it, run ./vipca manual as root on node 1.
In " Configuration Assistant Progess Dialog" screen, I had this error:
CRS-0215: Could not start resource "ora.sbdata01.gsd".
I have checked on Metalink but I can't fix this problem. Can you help me ?
Thanks,
See Metalink Note:276434.1
Maby that will help you solve your problem
Good luck
Marcel
Similar Messages
-
Vipca: Exception in thread "main"
I am trying to install oracle clusterware
I reached the point where I had to run root.sh on both the servers (one by one).
root.sh on 1st server went smoothly.
I commeted out the LD_ASSUME_KERNEL from vipca.
I ran root.sh on 2nd node, but it threw standard error for vipca.
Then I ran vipca on 2nd node from root user from outside as a standard procedure, on completion of root.sh on 2nd node.
I am getting the following error:
*[root@rac2 bin]# ./vipca*
*Exception in thread "main" [root@rac2 bin]#*
I did set DISPLAY variable and my xclock works fine too.
Please help me out.
Thanks..
shomil
Edited by: user7387659 on May 20, 2009 2:53 PMThis could be a bug - see MOS Doc 5854172.8 (Bug 5854172 - VIPCA fails with exception thread main error)
HTH
Srini -
I am trying to build a oracle rac as a test environment at home
I have three desktops
a) node1
b) node2
c) openfiler
I am using Jeffrey hunter's website for instructions on Oracle Rac 10g install using openfiler for iscsi
node1,node2 is configured for 10.2.0.1
When I do the create database with dbca I am getting a message
unable to start asm on node2
The change that I made in the install is as follows
node 1 has two network cards eth0-100 mbps - public ip address and eth1-1Gbit private ip address
node 2 has two network cards eth1-100 mbps - public ip address and eth0- 1gbit private ip address
when linux install was done it automatically assignmed eth0 to the 1gb nic card on node 2
Do you think that this is the issue ?
I post below some part of the asm alert log of node2
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 192.168.2.0 configured from OCR for use as a cluster interconnect
WARNING 192.168.2.0 could not be translated to a network address error 1
Interface type 1 eth0 192.168.1.0 configured from OCR for use as a public interface
WARNING: No cluster interconnect has been specified. Depending on
the communication driver configured Oracle cluster traffic
may be directed to the public interface of this machine.
Oracle recommends that RAC clustered databases be configured
with a private interconnect for enhanced security and
performance.I tried various methods but it did not work.
so to resolve the issue since this is a test environment at home I decided to reinstall the whole setup again.
Of course when I installed the Linux o/s (Centos 5.3) the eth0 was detected as the 1Gbps card and the eth1 was detected as 100mbps card of the motherboard.
So I swapped them by de-activating them and logging in as root and opening these files
vi /etc/sysconfig/network-scripts/ifcfg-eth0
vi /etc/sysconfig/network-scripts/ifcfg-eth1
and swapping the lines
HWADDR=<mac address>
from both files.
I activated the cards again and voila - the eth0 is now the 100mbps card and the eth1 is the 1Gbps card
I am having a small doubt with the documentation of Jeffrey Hunter
the doubt is
At the start of the documentation in the o/s network config section
on linux2 he specifies
eth0 -IPv4 Address: 192.168.1.101/ Prefix (Netmask): 255.255.255.0
eth1:-IPv4 Address: 192.168.2.101/ Prefix (Netmask): 255.255.255.0
When vipca fails
His documentation is as follows
quote
[root@linux2 ~]# /u01/app/crs/bin/oifcfg setif -global eth0/192.168.1.0:public
[root@linux2 ~]# /u01/app/crs/bin/oifcfg setif -global eth1/192.168.2.0:cluster_interconnect
[root@linux2 ~]# /u01/app/crs/bin/oifcfg getif
eth0 192.168.1.0 global public
eth1 192.168.2.0 global cluster_interconnect
Now - my question is why the difference between
eth0 -IPv4 Address: *192.168.1.101*/ Prefix (Netmask): 255.255.255.0
eth1:-IPv4 Address: *192.168.2.101*/ Prefix (Netmask): 255.255.255.0
and
[root@linux2 ~]# /u01/app/crs/bin/oifcfg setif -global eth0/192.168.1.0:public
[root@linux2 ~]# /u01/app/crs/bin/oifcfg setif -global eth1/192.168.2.0:cluster_interconnect
Jeffrey hunter's documentation link is below
===========================
http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle10gRAC/CLUSTER_12.shtml
Please help me out with this issue - Thanks a lot....
Edited by: user8523360 on Jan 14, 2010 8:22 AM
My Host file is as follows
===============
# Public Network - (eth0)
192.168.1.100 linux1
192.168.1.101 linux2
# Private Interconnect - (eth1)
192.168.2.100 linux1-priv
192.168.2.101 linux2-priv
# Public Virtual IP (VIP) addresses - (eth0:1)
192.168.1.200 linux1-vip
192.168.1.201 linux2-vip
# Private Storage Network for Openfiler - (eth1)
192.168.1.195 openfiler1
192.168.2.195 openfiler1-priv
Edited by: user8523360 on Jan 14, 2010 8:26 AM -
Frustrated. problem installing clusterware. no response from metalink
i've asked metalink and they haven't replied. i'm hoping that the otn community can help.
can't get vipca to run manually, post failure to run thru OUI when installing clusterware. comes back with an Exception Error, yet all the cluster readiness tests were reported successfully. i have included my tar here but have masked the oracle engineer's name as 'm not interested in shaming him, i just want to fix my system. many thanks in advance, John.
Severity 2 Last Update 04-MAY-07 07:49:19
Product Oracle Server - Standard Edition Product Version 10.2
Platform Microsoft Windows Server 2003 R2 (32-bit) Detailed Status Modified via MetaLink
SR Reference n/a BUG Reference n/a
Abstract
AMER4ISC: CONFIGURATION ASSISTANT "VIRTUAL PRIVATE IP CONFIGURATION ASSISTANT"
Resolution History
03-MAY-07 15:59:15 GMT
### PROBLEM STATEMENT ###
i have followed the installation instructions for installing clusterware with ASm as the preferred method for storage as this is
using Oracle Server Std Edition. when the config assistant ran, it succeeded
all steps prior to the following :
Output generated from configuration assistant "Virtual Private IP Configuration Assistant":
Command = C:\WINDOWS\system32\cmd /c call c:\oracle\product\10.2.0\crs/bin/vipca.bat
-silent -nodelist "whdc-wms-srv-1,whdc-wms-srv-2" -nodevips
"whdc-wms-srv-1/whdc-wms-srv-1-vip/255.255.255.0/public 180.120.1.126|public
180.120.1.126,whdc-wms-srv-2/whdc-wms-srv-2-vip/255.255.255.0/public
180.120.1.126|public 180.120.1.126"
Configuration assistant "Virtual Private IP Configuration Assistant" failed
i then tried to run the vipca afterwards and this fails with :
VIPCA FAILS WITH 'EXCEPTION IN THREAD MAIN' AT START
### GENERAL SYSTEM/DATABASE INFORMATION ###
there are no instances yet. this is a new production 2 node cluster on windows 2003 server. it is a production
system.
### RECENT CHANGES ###
new install
### WORKAROUNDS USED ###
none. the system is not running. need a successful installed
### BUSINESS IMPACT ###
the system is unavailable until the cluster can be built
### NUMBER OF INSTANCES/NODES ###
2
### STEPS TO REPRODUCE ###
have tried 3 times to install. on one occasion i even tried to follow the Oracle RAC Install paper by
Philip Newlan, which appears to be endorsed by Oracle as it states, if you have
issues with the document raise a TAR.
### O/S DETAILS ###
windows 2003 server Service Pack 2
### CLUSTERWARE ###
Oracle Clusterware without any vendor clusterware - CRS (10g)
### CLUSTERWARE DETAILS ###
the system does have windows 2003 cluster installed and successfully configured
### DATABASE VERSION/PATCHSET ###
haven't got to the point where the database is installed. the clusterware install is failing.
### CLUSTER INTERCONNECT ###
UDP over Gigabit Ethernet
### CLUSTER INTERCONNECT DETAILS ###
peer to peer (x-over) heartbeat on private subnet
### OCR, VOTING/QUORUM DISK LOCATION ###
Raw Volumes/Partitions
### OCR, VOTING/QUORUM DISK LOCATION DETAILS ###
2 x HP DL380 G5 servers + external scsi array with RAID 1+0
### DATABASE FILE LOCATION ###
ASM
### DATABASE FILE LOCATION DETAILS ###
n/a at this stage although the voting disk, quorum and the 3 4096MB ASM disks are defined.
### CLUVFY USAGE ###
No
### CLUVFY DETAIL ###
can't run CLUVFY. doesn't work
### DIAGNOSTIC DATA COLLECTED? ###
No
Text continued in next action...
03-MAY-07 15:59:19 GMT
Text continued from previous action...
### DIAGNOSTIC DATA COLLECTED ###
n/a
### ORA-600/ORA-7445 ###
n/a
PLEASE NOTE. THE SYSTEM IS NOT LIVE YET. IT IS NOT A CRITICAL PRODUCTION SYSTEM DOWN PRIORITY BUT IS IMPORTANT TO
TREAT AS URGENT.
Can you easily recover from, bypass or work around the problem?
No
Does your system or application continue normally after the problem occurs?
No
Are the standard features of the system or application still available; is the loss of service minor?
No
Contact me via : E-mail -> [email protected]
03-MAY-07 16:11:53 GMT
Hi ,
I have been assigned your SR and am currently reviewing/researching the situation and
will update the TAR / call you as soon as I have relevant information.
Thank you for your patience.
Best regards,
xxxxx
DS - HA Support
03-MAY-07 16:15:04 GMT
UPDATE
=======
Hi John.
How are you invoking VIPCA after the fact?
- From the command linke with the same parameters as above ( the -silent option should be
removed)
or
- from the command line without any parameters?
If you have not tried to invoke vipca.bat without parameters please do so and enter the required i
nformation when prompted.
Regards,
xxxxx
DS - HA Support
@CUS
03-MAY-07 16:15:30 GMT
Email Update button has been pressed: Sending email to [email protected].
04-MAY-07 07:36:08 GMT
New info : [email protected]
hi xxxxx
in a command window, i fo the following :
C:\oracle\product\10.2.0\crs\BIN>cd c:\oracle\product\10.2.0\crs/bin/
C:\oracle\product\10.2.0\crs\BIN>vipca.bat
Exception in thread "main"
java.lang.NoClassDefFoundError:
C:\oracle\product\10.2.0\crs\BIN>
if i execute vipca commands individually, i actually get the following error on the
last line.
C:\oracle\product\10.2.0\crs\BIN>%CACMD%
Exception in thread "main" java.lang.NoClassDefFoundError: %SRVM_PROPERTY_DEFS%
thanks
04-MAY-07 09:24:05 GMT
New info : [email protected]
xxxxx,
in addition :
i do not understand why this is giving me a syntax error.
cluvfy stage -post hwos -n whdc-wms-srv-1,whdc-wms-srv2 -verbose
ERROR:
Invalid command line syntax.
USAGE:
cluvfy stage {-pre|-post} <stage-name> <stage-specific options> [-verbose]
SYNTAX (for Stages):
cluvfy stage -post hwos -n <node_list> [ -s <storageID_list> ] [-verbose]
cluvfy stage -pre cfs -n <node_list> -s <storageID_list> [-verbose]
cluvfy stage -post cfs -n <node_list> -f <file_system> [-verbose]
cluvfy stage -pre crsinst -n <node_list> [-r { 10gR1 | 10gR2 } ]
[ -c <ocr_location> ] [ -q <voting_disk> ] [-verbose]
cluvfy stage -post crsinst -n <node_list> [-verbose]
cluvfy stage -pre dbinst -n <node_list> [-r { 10gR1 | 10gR2 } ] [-verbose]
cluvfy stage -pre dbcfg -n <node_list> -d <oracle_home> [-verbose]
04-MAY-07 10:56:02 GMT
New info : [email protected]
hi xxxxxx
further information. hope this helps.
with each check, got the same result for both nodes
runcluvfy.bat comp nodereach -n whdc-wms-srv-1,whdc-wms-srv-2 -verbose
Verifying node reachability
Checking node reachability...
Check: Node reachability from node "whdc-wms-srv-2"
Destination Node Reachable?
whdc-wms-srv-2 yes
whdc-wms-srv-1 yes
Result: Node reachability check passed from node "whdc-wms-srv-2".
Verification of node reachability was successful.
runcluvfy.bat comp sys -n whdc-wms-srv-1,whdc-wms-srv-2 -p crs
Verifying system requirement
Checking system requirements for 'crs'...
Operating system version check passed.
Total memory check passed.
Swap space check passed.
System architecture check passed.
Free disk space check passed.
System requirement passed for 'crs'
Verification of system requirement was successful.
runcluvfy.bat comp nodecon -n whdc-wms-srv-1,whdc-wms-srv-2 -verbose
Verifying node connectivity
Checking node connectivity...
Interface information for node "whdc-wms-srv-1"
Interface Name IP Address Subnet
public 180.120.1.126 180.120.1.124 180.120.1.0
public 180.120.1.126 180.120.1.126 180.120.1.0
HEARTBEAT 10.10.10.11 10.10.10.10 10.0.0.0
Interface information for node "whdc-wms-srv-2"
Interface Name IP Address Subnet
public 180.120.1.126 180.120.1.127 180.120.1.0
HEARTBEAT 10.10.10.11 10.10.10.11 10.0.0.0
Check: Node connectivity of subnet "180.120.1.0"
Source Destination Connected?
whdc-wms-srv-1:public 180.120.1.126 whdc-wms-srv-1:public 180.120.1.126 yes
whdc-wms-srv-1:public 180.120.1.126 whdc-wms-srv-2:public 180.120.1.126 yes
whdc-wms-srv-1:public 180.120.1.126 whdc-wms-srv-2:public 180.120.1.126 yes
Result: Node connectivity check passed for subnet "180.120.1.0" with node(s) whd
c-wms-srv-1,whdc-wms-srv-2.
Check: Node connectivity of subnet "10.0.0.0"
Source Destination Connected?
whdc-wms-srv-1:HEARTBEAT 10.10.10.11 whdc-wms-srv-2:HEARTBEAT 10.10.10.11 ye
s
Result: Node connectivity check passed for subnet "10.0.0.0" with node(s)
whdc-w
ms-srv-1,whdc-wms-srv-2.
Suitable interfaces for VIP on subnet "180.120.1.0":
whdc-wms-srv-1 public 180.120.1.126:180.120.1.124 public 180.120.1.126:180.120.1
.126
whdc-wms-srv-2 public 180.120.1.126:180.120.1.127
Suitable interfaces for the private interconnect on subnet "10.0.0.0":
whdc-wms-srv-1 HEARTBEAT 10.10.10.11:10.10.10.10
whdc-wms-srv-2 HEARTBEAT 10.10.10.11:10.10.10.11
Result: Node connectivity check passed.
Verification of node connectivity was successful.
Text continued in next action...
04-MAY-07 10:57:03 GMT
Text continued from previous action...
04-MAY-07 12:12:02 GMT
New info : [email protected]
hi xxxxx,
i've also checked the storage and this was the result from both nodes.
runcluvfy.bat comp ssa -n whdc-wms-srv-1,whdc-wms-srv-2
Verifying shared storage accessibility
Checking shared storage accessibility...
Disk Partition Sharing Nodes (2 in count)
VOTEDSK1 whdc-wms-srv-1
whdc-wms-srv-2
Disk Partition Sharing Nodes (2 in count)
OCRCFG whdc-wms-srv-1
whdc-wms-srv-2
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk2\Partition3 whdc-wms-srv-1
whdc-wms-srv-2
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk2\Partition4 whdc-wms-srv-1
whdc-wms-srv-2
Disk Partition Sharing Nodes (2 in count)
\Device\Harddisk2\Partition5 whdc-wms-srv-1
whdc-wms-srv-2
Shared storage check was successful on nodes "whdc-wms-srv-1,whdc-wms-srv-2".
Verification of shared storage accessibility was successful.
04-MAY-07 12:23:01 GMT
New info : [email protected]
apologies if this is too much information: but i have also run the Oracle Clusterware Requirements as
follows, and got the same result from each node.
runcluvfy.bat stage -pre crsinst -n whdc-wms-srv-1,whdc-wms-srv-2
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "whdc-wms-srv-1".
Checking user equivalence...
User equivalence check passed for user "oracle".
Checking administrative privileges...
Checking node connectivity...
Node connectivity check passed for subnet "180.120.1.0" with node(s) whdc-wms-sr
v-1,whdc-wms-srv-2.
Node connectivity check passed for subnet "10.0.0.0" with node(s) whdc-wms-srv-1
,whdc-wms-srv-2.
Suitable interfaces for VIP on subnet "180.120.1.0":
whdc-wms-srv-1 public 180.120.1.126:180.120.1.124 public 180.120.1.126:180.120.1
.126
whdc-wms-srv-2 public 180.120.1.126:180.120.1.127
Suitable interfaces for the private interconnect on subnet "10.0.0.0":
whdc-wms-srv-1 HEARTBEAT 10.10.10.11:10.10.10.10
whdc-wms-srv-2 HEARTBEAT 10.10.10.11:10.10.10.11
Node connectivity check passed.
Checking system requirements for 'crs'...
Operating system version check passed.
Total memory check passed.
Swap space check passed.
System architecture check passed.
Free disk space check passed.
System requirement passed for 'crs'
Pre-check for cluster services setup was successful.
04-MAY-07 12:38:04 GMT
New info : [email protected]
hi
by the way, i am following Part Number B14207-01. Oracle® Database Oracle Clusterware and Oracle Real
Application Clusters Installation Guide
10g Release 2 (10.2) for Microsoft Windows
i am upto section 4 Installing Oracle Clusterware on Windows-Based Systems.
this is where i did as stated, Using Oracle Universal Installer to Install Oracle Clusterware on Windows
then at step 9, When you click Finish, the OUI installs the OCFS and Oracle Clusterware software on the local node and
validates the installation again. The OUI will also create any required OCFS
file systems. After validating the installation, the OUI completes the Oracle
Clusterware software installation and configuration on the remote nodes.
this is where the configuration assistant fails, with the :
Output generated from configuration assistant "Virtual Private IP Configuration Assistant":
Command = C:\WINDOWS\system32\cmd /c call c:\oracle\product\10.2.0\crs/bin/vipca.bat
-silent -nodelist "whdc-wms-srv-1,whdc-wms-srv-2" -nodevips
"whdc-wms-srv-1/whdc-wms-srv-1-vip/255.255.255.0/public 180.120.1.126|public
180.120.1.126,whdc-wms-srv-2/whdc-wms-srv-2-vip/255.255.255.0/public
180.120.1.126|public 180.120.1.126"
Configuration assistant "Virtual Private IP Configuration Assistant" failed
, and then when you try to vipca.bat manually, you get :
C:\oracle\product\10.2.0\crs\BIN>vipca
Exception in thread "main"
04-MAY-07 07:49:19 : CHANGES MADE VIA MetaLink
NOT YET FORWARDED TO OUR INTERNAL SYSTEMS :
New info : [email protected]
hi xxxxxx
also noted that even after the 1st attempt to install clusterware the path is as follows :
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
not sure when there is no change to the path as a result of the oracle install, as there is a JRE and jlib folder under the oracle home : C:\oracle\product\10.2.0\crs\jlib1st question is you have contradictory statements in your tar. 1) you say no vendor clusterware and the you say you have windows 2003 clusterware installed and configured.
Why are you installing both?
Although I don;t think that is the problem here, I wonder why anyone would want to run 2 independent cluster software on same servers.
Now the output from the installer has whdc-wms-srv-2-vip output from cluvfy shows suitable interface as whdc-wms-srv-1 HEARTBEAT 10.10.10.11:10.10.10.10
whdc-wms-srv-2 HEARTBEAT 10.10.10.11:10.10.10.11
whdc-wms-srv-2-vip what you entered to installer does not match what is available! -
Public Interface not responding after second node is started in the cluster
Hi
Has anyone ever experienced the public interface not responding between nodes in the cluster (ping, ssh, scp) after the second nodeapps is started in the cluster?
This is a new install so all I have installed so far is the base release of CRS 10.2.0. This is on Solaris10. The vipca failed during the installation, however I was able to proceed and manually add the nodeapps using srvctl add nodeaps -n -o -A.
It seems after the second node is started I loose all connectivity to the public interfaces and to my default gateway.
Also I'm getting the following messages sometimes after I try and stop the nodeapps and start them back up.
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.node1.vip'.
Any suggestions on where I should start troubleshooting?
ThanksDo you have default GW?
It can connects with GW, can't it?
Check metalink
CRS-0215: Could not start resource 'ora..vip' [ID 356535.1]
CRS-1006: No more members to consider when starting service [ID 465364.1]
Good Luck -
Metalink Document IDs for RAC database
Hello,
This is Khalid, Plz any body could give me metalink document id's for RAC database managing and monitoring, backup and recoveries etc.. plz any document id related to RAC databases.....
Thanks & Regards
KhalidClusterware References
Metalink Notes
259301.1 CRS and 10g RAC
This note contains a useful awk script to improve the output of crs_stat -ls
436067.1 Windows CRS_STAT script to display long names correctly
309541.1 How to start/stop the 10g CRS Clusterware
263897.1 How to stop Cluster Ready Services (CRS)
298073.1 How to remove CRS auto start and restart for a RAC instance
295871.1 How to verify if CRS install is valid
316583.1 VIPCA fails complaining that interface is not public
341214.1 How to cleanup after a failed (or successful) Oracle Clusterware installation
280589.1 How to install Oracle 10g CRS on a cluster where one or more nodes are not to be configured with CRS immediately
357808.1 CRS Diagnostics
272331.1 CRS 10g Diagnostic Guide
330358.1 CRS 10g R2 Diagnostic Collection Guide
331168.1 Oracle Clusterware consolidated logging in 10gR2
342590.1 CRS logs not being written
357808.1 Diagnosability for CRS/EVM/RACG
459694.1 Procwatcher: Script to Monitor and Examine Oracle and CRS Processes
289690.1 Data Gathering for Troubleshooting RAC and CRS issues
265769.1 Troubleshooting CRS Reboots
240001.1 Troubleshooting CRS root.sh problems (10g RAC)
239989.1 10g RAC - Stopping Reboot Loops when CRS problems occur
294430.1 CSS Timeout Computation in 10g RAC
284752.1 10gRAC: Steps to Increase CSS Misscount, Reboottime and Disktimeout
462616.1 Reconfiguring the CSS disktimeout of 10gR2 Clusterware for proper LUN failover
293819.1 Placement of voting and OCR disk file in 10g RAC
317628.1 How to replace a corrupt OCR mirror file
452486.1 Moving OCR and Voting Disk to another location
399482.1 How to recreate OCR/Voting disk accidentally deleted
358620.1 How to recreate OCR/Voting disk in 10gR1/R2 RAC
279793.1 How to Restore a Lost Voting Disk in 10g
264847.1 How to Configure Virtual IPs for 10g RAC
283684.1 How to change interconnect/public interface IP subnet in a 10g cluster
276434.1 Modifying the VIP or VIP Hostname of an Oracle 10g Clusterware Node
294336.1 Changing the check interval for the Oracle 10g VIP
219361.1 Troubleshooting Instance Evictions (ORA-29740)
297498.1 Resolving Instance Evictions on Windows platforms
315125.1 What to check if the Cluster Synchronization Services daemon (OCSSD) does not start
270512.1 Adding a node to a 10g RAC Cluster
269320.1 Removing a node from a 10g RAC Cluster
338706.1 Cluster Ready Services (CRS) rolling upgrade
399031.1 Step-by-step installation of Oracle Clusterware one-off and bundle patches for Oracle 10g
401783.1 Changes in Oracle Clusterware after applying 10.2.0.3 Patchset
405820.1 Known Issues After Applying 10.2 CRS bundle patches
316817.1 Cluster Verification Utility (CLUVFY) FAQ
372358.1 Shared disk check with the Cluster Verification Utility
338924.1 CLUVFY Fails with error - could not find a suitable set of interfaces for VIPs
Bugs
5849200 CRS LOGS ARE NOT BEING WRITTEN
5137401 OPROCD LOGFILE IS CLEARED AFTER A REBOOT
Fixed in Oracle 10.2.0.4+ and 11.1.0.6+
source: http://www.juliandyke.com/References/Clusterware.html
regards,
Rajeshkumar Govindarajan.
http://oracleinstance.blogspot.com -
10g RAC installation fails....
Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AMThank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help? -
Root.sh fails on second node during clusterware installation
I am setting up a test instance of OEL 5.4 using VMware.
I am running the clusterware install and it is failing only on node2. See below.
I followed note 414897.1 on metalink for raw device setup.
Any help would be greatly appreciate.
2010-09-01 11:58:21.084: [ default][1275584]a_init:7!: Backend init unsuccessful : [22]
2010-09-01 11:58:21.091: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]ibctx:1:ERROR: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]proprinit:problem reading the bootblock or superbloc 22
2010-09-01 11:58:21.097: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.139: [ OCRRAW][1275584]propriowv: Vote information on disk 0 [u01/app/oracle/oradata/ocr] is adjusted from [0/0] to [2/2]
2010-09-01 11:58:21.191: [ OCRRAW][1275584]propriniconfig:No 92 configuration
2010-09-01 11:58:21.192: [ OCRAPI][1275584]a_init:6a: Backend init successful
2010-09-01 11:58:21.299: [ OCRCONF][1275584]Initialized DATABASE keys in OCR
2010-09-01 11:58:21.555: [ OCRCONF][1275584]Successfully set skgfr block 0
2010-09-01 11:58:21.557: [ OCRCONF][1275584]Exiting [status=success]...Oracle 10gR2 RAC Installation in RedHat 5 Linux Using VMware.
Important points to install 10gR2 oracle RAC in linux5.
1.LINUX 5(Redhat 5) doesn't have /etc/sysconfig/rawdevices file. so we have to configure it.
2. Edit the /etc/redhat-release version to redhat-4 and and to invoke the runInstaller use the command
$runInstaller -ignoreSysPrereqs. //this will bypass the os check //
3. Next during clusterware installation at the end of root.sh in node 2 end with error message.So we have adjust the parameters in vipca and srvctl files.
4. vipca will fail to run. so we have to adjust some parameters and configure it manually.
refer the link, it will be useful to you to complete your installation.
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html -
Free diskspace check failed foe ecah node
Hi all
I am tring to install oracle RAC in Windows 2003 srver.I have creared 2 virtual pc.I follwed every step correctly coz the clusterware software installs upto vipca.After that i sudelny see a blue screen stating that the hardware failure .Now i am trng eith 2 virtual pcs.when i run runcluvfy.bat stage -pre crsinst -n RAC1,RAC2 -verbose
The error is
Free disk space in
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.RAC\LOCALS~1\Temp" dir
Node Name Available Required Comment
RAC2 unknown 400MB (409600KB) failed
RAC1 10.79GB (11313436KB) 400MB (409600KB) passed
Result: Free disk space check failed.
System requirement failed for 'crs'.
what should i do.Thanks
Edited by: user12119634(bobs) on Dec 13, 2009 9:02 PMDefine virtual PCs. Provide full description of the technology, vendor, and version number. If this is another attempt to use unsupported technology like VMWare then you are going against what Oracle recommends and you are on your own.
Since you do not have a valid clusterware installation as indicated by the cluster verify tool this is a really good time to stop the installation and think through these two questions:
1. What is your shared storage solution? With Windows you only have a couple of possible choices none of which you have mentioned.
2. What is your cache fusion interconnect strategy?
If you don't get these right you are wasting your time.
SB ... I have no idea why you think this question is in the wrong forum. Can you explain? -
Hi all
I am tring to install oracle RAC in Windows 2003 srver.I have creared 2 virtual pc.I follwed every step correctly coz the clusterware software installs upto vipca.After that i sudelny see a blue screen stating that the hardware failure .Now i am trng eith 2 virtual pcs.when i run runcluvfy.bat stage -pre crsinst -n RAC1,RAC2 -verbose
The error is
Free disk space in
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.RAC\LOCALS~1\Temp" dir
Node Name Available Required Comment
RAC2 unknown 400MB (409600KB) failed
RAC1 10.79GB (11313436KB) 400MB (409600KB) passed
Result: Free disk space check failed.
System requirement failed for 'crs'.
what should i do.ThanksHi,
Firstly is node RAC2 is reachable?
Secondly is check the C: drive space, how much space left?
Cheers
FZheng -
Oracle Audit Vault installation fails on DVCA assistant + libpthread.so.0
Hello experts, I did this post at general forums but nobody noticed anything, I need your help
I am able to install the Oracle Audit Vault Server on the following features:
OS: Suse Linux 10 SP 2
Clusterware version: 11.1.0 6
The Oracle Audit Vault server installation procces creates the database an starts the instances on each node and notice me the url for the Enterprise Manager but after that it fails at DVCA assistante because is not able to load the shared library libpthread.so.0.
I found in internet that some time there are files like srvctl, vipca, etc tha export LD_ASSUME_KERNEL ant we have to comment that line, but I do not found the line in those files. I just found in the crsctl file this line like
LD_ASSUME_KERNEL=
export LD_ASSUME_KERNEL
PD: The libpthread.so.0 library already exist
Should I comment this line at crsctl file?
Thank you in advance.Here you are the error messages:
Is the Oracle Audit Vault server 10.2.3
Command = /opt/oracle/product/av/bin/dvca -action option -oh
/opt/oracle/product/av -s_path /opt/oracle/oradata/ -logfile
/opt/oracle/product/av/cfgtoollogs/dvca_install.log -owner_account vault
-owner_passwd ${s_ownerEncryptPwd} -acctmgr_account vault1 ${s_dvMgrPwdArg}
-jdbc_str jdbc:oracle:oci:@av1 ${s_sysPasswdArg} -languages {"en"} -racnode
seguridad1.min2.dtc -lockout
MANAGE_LISTENER start listener
MANAGE_LISTENER start listener
result=/opt/oracle/product/av/bin/dvca_start_listener.sh,127,/opt/oracle/product/av/jdk/jre/bin/java:
error while loading shared libraries: libpthread.so.0: cannot open shared
object file: No such file or directory
MANAGE_LISTENER start listener log=
MANAGE_INSTANCE start RDBMS
MANAGE_INSTANCE start RDBMS
result=/opt/oracle/product/av/bin/dvca_start_rdbms.sh,127,/opt/oracle/product/av/jdk/jre/bin/java:
error while loading shared libraries: libpthread.so.0: cannot open shared
object file: No such file or directory
MANAGE_INSTANCE start RDBMS log=
Executing task SQLPLUS_CATOLS
Executing task RESTART_SERVICES_OLS
MANAGE_INSTANCE stop isqlplus
MANAGE_INSTANCE stop OC4J
MANAGE_LISTENER start listener
MANAGE_LISTENER start listener
result=/opt/oracle/product/av/bin/dvca_start_listener.sh,127,/opt/oracle/product/av/jdk/jre/bin/java:
error while loading shared libraries: libpthread.so.0: cannot open shared
object file: No such file or directory
MANAGE_LISTENER start listener log=
MANAGE_INSTANCE start RDBMS
MANAGE_INSTANCE start RDBMS
result=/opt/oracle/product/av/bin/dvca_start_rdbms.sh,127,/opt/oracle/product/av/jdk/jre/bin/java:
error while loading shared libraries: libpthread.so.0: cannot open shared
object file: No such file or directory
MANAGE_INSTANCE start RDBMS log=
Executing task SQLPLUS_CATMAC
connect SYS:java.sql.SQLException: ORA-01034: ORACLE not available
Questions:
Is the Audit Vault Server Installation compatible with CRS version 11.1.0.6 -
VIPCA and CRS-0184: Cannot communicate with CRS daemon
I have some strange issue during Clusterware installation. I've installed software on 2 nodes, and have ran root.sh on both. On second node I've had problem with interfaces but it came through after using oifcfg for both public and private interface. Silent vipca executed by root.sh failed, but as it is said in docs it's ok. I need to run vipca on second node manually. But when I'm running it I'm receiving CRS-0184 Cannot communicate with CRS daemon. Daemons are running, there's no error running crs_start -all. I don't have any idea what can I do now.
Clusterware 10.2.0.1
SUSE Linux Enterprise Server 10 SP210/26/2008 17:56:08
./ocrdump.bin
[SYSTEM]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.interfaces]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global.eth0]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global.eth0.172|d16|d216|d0]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global.eth0.172|d16|d216|d0.1]
ORATEXT : public
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global.eth0.172|d216|d16|d0]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global.eth0.172|d216|d16|d0.1]
ORATEXT : public
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global.eth1]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global.eth1.192|d168|d0|d0]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.interfaces.global.eth1.192|d168|d0|d0.1]
ORATEXT : cluster_interconnect
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[SYSTEM.css.clustername]
ORATEXT : crs
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.misscount]
UB4 (10) : 60
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.diskfile]
ORATEXT : /dev/raw/raw2
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.configured_node_map]
BYTESTREAM (16) : 6
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_names]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_names.slesorange]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_names.slesorange.nodenum]
UB4 (10) : 1
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_names.slesred]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_names.slesred.nodenum]
UB4 (10) : 2
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node1]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node1.nodename]
ORATEXT : slesorange
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node1.privatename]
ORATEXT : slesorange-priv
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node1.hostname]
ORATEXT : slesorange
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node1.nsendpoint]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49895))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node2]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node2.nodename]
ORATEXT : slesred
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node2.privatename]
ORATEXT : slesred-priv
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node2.hostname]
ORATEXT : slesred
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.node_numbers.node2.nsendpoint]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49895))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.privatenames]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.privatenames.slesorange-priv]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.privatenames.slesorange-priv.nodenum]
UB4 (10) : 1
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.privatenames.slesred-priv]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.privatenames.slesred-priv.nodenum]
UB4 (10) : 2
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.hostnames]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.hostnames.slesorange]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.hostnames.slesorange.nodenum]
UB4 (10) : 1
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.hostnames.slesred]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.css.hostnames.slesred.nodenum]
UB4 (10) : 2
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.language]
ORATEXT : AMERICAN_AMERICA.WE8ISO8859P1
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.version]
UB4 (10) : 3
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.version.node_numbers]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.version.node_numbers.node1]
ORATEXT : 10.2.0.1.0
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.version.node_numbers.node2]
ORATEXT : 10.2.0.1.0
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.version.activeversion]
ORATEXT : 10.2.0.1.0
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.versionstring]
ORATEXT : 10G Release 2
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.ORA_CRS_HOME]
ORATEXT : /u01/oracle/product/10.2.0/crs
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.local_only]
ORATEXT : false
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.cevmkey]
ORATEXT : 17536746
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.rmport]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.rmport.localhost]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=49897))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.rmport.slesorange]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49897))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.rmport.slesred]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49897))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.cevmport]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.cevmport.slesorange]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49898))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.cevmport.slesred]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49898))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.acceptor]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.acceptor.slesorange]
ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Aslesorange_crs_evm))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.acceptor.slesred]
ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Aslesred_crs_evm))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.cevmipc]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.cevmipc.slesorange]
ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Cslesorange_crs_evm))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.evm.cevmipc.slesred]
ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=Cslesred_crs_evm))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.usersecurity]
ORATEXT : 1
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.deny]
ORATEXT :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.user_default_dir]
ORATEXT : /u01/oracle/product/10.2.0/crs/crs/public
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.e2eport]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.e2eport.slesorange]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesorange-priv)(PORT=49896))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.e2eport.slesred]
ORATEXT : (ADDRESS=(PROTOCOL=tcp)(HOST=slesred-priv)(PORT=49896))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.uiport]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.uiport.slesorange]
ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.crs.uiport.slesred]
ORATEXT : (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.0]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.0.NODENAME]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.0.TIMESTAMP]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.0.LOC]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.1]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.1.NODENAME]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.1.TIMESTAMP]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.1.LOC]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.2]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.2.NODENAME]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.2.TIMESTAMP]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.2.LOC]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.DAY]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.DAY.NODENAME]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.DAY.TIMESTAMP]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.DAY.LOC]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.DAY_]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.DAY_.NODENAME]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.DAY_.TIMESTAMP]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.DAY_.LOC]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.WEEK]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.WEEK.NODENAME]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.WEEK.TIMESTAMP]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.WEEK.LOC]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.WEEK_]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.WEEK_.NODENAME]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.WEEK_.TIMESTAMP]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[SYSTEM.OCR.BACKUP.WEEK_.LOC]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
[DATABASE]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : root, GROUP_NAME : root}
[DATABASE.NODEAPPS]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.VIP_RANGE]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.LOG]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_ALL_ACCESS, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.ASM]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.DATABASES]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_CREATE_SUB_KEY, GROUP_PERMISSION : PROCR_CREATE_SUB_KEY, OTHER_PERMISSION : PROCR_CREATE_SUB_KEY, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.ONS_HOSTS]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.ONS_HOSTS.slesorange]
ORATEXT : slesorange
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.ONS_HOSTS.slesorange.PORT]
ORATEXT : 6200
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.ONS_HOSTS.slesred]
ORATEXT : slesred
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[DATABASE.ONS_HOSTS.slesred.PORT]
ORATEXT : 6200
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
[CRS]
UNDEF :
SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root} -
CRS Installation error while running vipca
i'm trying to configure RAC on my laptop using VMWARE SERVER when vipca is running i get error saying that
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.rac1.vip'.
when i check
on RAC-1(node-1)
./crs_stat -t
Name Type Target State Host
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE OFFLINE
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE OFFLINE
on (RAC-2)NODE-2 ./crs_stat -t
Name Type Target State Host
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip application ONLINE OFFLINE
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip application ONLINE OFFLINE
./srvctl start nodeapps -n rac1
rac1:ora.rac1.vip:ping to 192.168.2.1 via eth0 failed, rc = 1 (host=rac1.localdomain)
rac1:ora.rac1.vip:ping to 192.168.2.1 via eth0 failed, rc = 1 (host=rac1.localdomain)
rac1:ora.rac1.vip:Interface eth0 checked failed (host=rac1.localdomain)
rac1:ora.rac1.vip:Invalid parameters, or failed to bring up VIP (host=rac1.localdomain)
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.rac1.vip'
./srvctl start nodeapps -n rac2
rac2:ora.rac2.vip:ping to 192.168.2.1 via eth0 failed, rc = 1 (host=rac2.localdomain)
rac2:ora.rac2.vip:ping to 192.168.2.1 via eth0 failed, rc = 1 (host=rac2.localdomain)
rac2:ora.rac2.vip:Interface eth0 checked failed (host=rac2.localdomain)
rac2:ora.rac2.vip:Invalid parameters, or failed to bring up VIP (host=rac2.localdomain)
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.rac2.vip'.
/etc/hosts cofiguration
127.0.0.1 localhost.localdomain localhost
# Public
192.168.2.101 rac1.localdomain rac1
192.168.2.102 rac2.localdomain rac2
#Private
192.168.0.101 rac1-priv.localdomain rac1-priv
192.168.0.102 rac2-priv.localdomain rac2-priv
#Virtual
192.168.2.111 rac1-vip.localdomain rac1-vip
192.168.2.112 rac2-vip.localdomain rac2-vip
RAC-1
eth0
PUBLIC-IP----*192.168.2.101*
SUBNETMASK--*255.255.255.0*
DEFAULT GATEWAY ADDRESS-*192.168.2.1*
hostname----rac1.localdomain
eth1
PRIVATE-IP-----*192.168.0.101*
SUBNETMASK-*255.255.255.0*
RAC-2
eth0
PUBLIC-IP---*192.168.2.102*
SUBNETMASK---*255.255.255.0*
DEFAULTGATEWAYADDRESS--*192.168.2.1*
hostname----rac2.localdomain
eth1
PRIVATE-IP---*192.168.0.102*
SUBNET MASK----*255.255.255.0*
Please help me to rectify this issue. do i need to configure anything on virtual network editor in host machine(winXP) in VMWARE SERVER?
Thanks
BalaRAC-1
# /sbin/ifconfig
output
eth0 Link encap:Ethernet HWaddr 00:0C:29:C1:1D:2D
inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fec1:1d2d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:414 errors:0 dropped:0 overruns:0 frame:0
TX packets:257 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:64347 (62.8 KiB) TX bytes:18169 (17.7 KiB)
Interrupt:67 Base address:0x2424
eth1 Link encap:Ethernet HWaddr 00:0C:29:C1:1D:37
inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fec1:1d37/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13320 errors:0 dropped:0 overruns:0 frame:0
TX packets:11886 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6681669 (6.3 MiB) TX bytes:4077970 (3.8 MiB)
Interrupt:75 Base address:0x24a4
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10714 errors:0 dropped:0 overruns:0 frame:0
TX packets:10714 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4156195 (3.9 MiB) TX bytes:4156195 (3.9 MiB)
Rac-2
eth0 Link encap:Ethernet HWaddr 00:0C:29:7C:CA:FD
inet addr:192.168.2.102 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe7c:cafd/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:514 errors:0 dropped:0 overruns:0 frame:0
TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:58055 (56.6 KiB) TX bytes:11834 (11.5 KiB)
Interrupt:67 Base address:0x2424
eth1 Link encap:Ethernet HWaddr 00:0C:29:7C:CA:07
inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe7c:ca07/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12593 errors:0 dropped:0 overruns:0 frame:0
TX packets:13048 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4166279 (3.9 MiB) TX bytes:6670257 (6.3 MiB)
Interrupt:75 Base address:0x24a4
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:13546 errors:0 dropped:0 overruns:0 frame:0
TX packets:13546 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8087597 (7.7 MiB) TX bytes:8087597 (7.7 MiB)
[root@rac1 ~]# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
From 192.168.2.101 icmp_seq=2 Destination Host Unreachable
From 192.168.2.101 icmp_seq=3 Destination Host Unreachable
From 192.168.2.101 icmp_seq=4 Destination Host Unreachable
[root@rac2 ~]# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
From 192.168.2.102 icmp_seq=2 Destination Host Unreachable
From 192.168.2.102 icmp_seq=3 Destination Host Unreachable
From 192.168.2.102 icmp_seq=4 Destination Host Unreachable -
I am trying to install 10g Clusterware on cent O.S(4.8), 2 vitural servers and the host operating system being Windows 7 Ultimate . After the initial configuration of the operating system/packages etc..,I have configured 2 NIC's eth0- Public & Vip(which i keep it inactive) eth1- Interconnect, on both the nodes. I successfully run cluvfy and get no errors (Except for VIP). The installer runs fine, ./vipca runs fine too, but when completeing the installation, it tells me that there are a few pre-requisites which are failed.
When i look at the logs, I see that the below steps have failed.
u01/crs/oracle/product/10.2.0/crs/bin/racgons add_config rac1.localdomain:6200 rac2.localdomain:6200
/u01/crs/oracle/product/10.2.0/crs/bin/oifcfg setif -global eth0/192.168.1.0:public eth1/192.168.2.0:cluster_interconnect
/u01/crs/oracle/product/10.2.0/crs/bin/cluvfy stage -post crsinst -n rac1,rac2
Also, I cleaned up the install and tried to reinstall it agian, by running vipca or both the nodes as well as for each node once at a time. Also tried to clean up the OCR/VOting disk entries.
Tried googling it but there is no perfect solution for it, all i see is how to clean up the installation, but no one has posted a fix for it. I would highly appreciate if someone could shed some light on it.
Thanks,
AbHi deyz;
I belive you can have more quick response on Forum Home » Grid Computing » RAC, ASM & Clusterware Installation, i suıggest move your issue to this forum part
Regard
Helios -
OS : Solaris 5.10, RHEL 5
I came across the VIP configuration assistant utility in the documentation.
I have installed both 10.2 and 11.2 RAC databases but i never had to use VIPCA .VIP is just an unassigned address in the Public network's subnet and i had used /etc/hosts file (rather than DNS or GNP) to speficy the VIPs. I think VIP was initialized and configured when we run root.sh script at the end.
Under what circumstance should we be using VIPCA?Hi,
VIPCA was used in 10.2 (not anymore in 11.2) implicitly at the end of the last root.sh and runs in silent mode.
However if you used 192.168.X.X or 10.X.X.X addresses for your public network it failed in 10.2.
As a workaround you had to call VIPCA manually.
Regards
Sebastian
Maybe you are looking for
-
Application Developed in Apex 3.2 is not working Apex 4.1
Hi, We have few application developed using oracle apex 3.2 and oracle 10g enterprise edition as the database also have a Apache tomcat server configured in the system. These application are running fine have no issue in production instance. I recent
-
How do i sync games from my computer to my ipod any one help please having a lot of trouble
how do i sync free games from itunes apps to my daughters ipod touch been trying for ages i have got to the games app store selected the free games she wants ticked the boxes and tryed to sync just not happening please help ...
-
Hp pavalion g6 compatable with windows 8
is my pavalion g6 series compatable with windows 8 its a 64bit system
-
Fluid grid for Wordpress: insert PHP code into DW or DW code into Wordpress?
This may be a stupid question but it's a dilemma for me. Here's the problem. I want to create a mobile first, fluid grid Wordpress website in Dreamweaver CS6 based on an existing Wordpress theme. I can see two ways of doing that: 1) Create a fluid gr
-
Wait for all threads in a array to die
I everyone. I'm from Portugal and I have some experience in JAVA programming (approximately five years) but this is the first the first time that i'm trying to use threads. I'm trying to learn writing some simpler code that does almost exactly at the