VIRTUAL KEYBOARD/LANDSCAPE VIEW
My BlackBerry 9810 suddenly stopped showing in landscape view & will not show the virtual keyboard. I have checked setting, removed battery & deleted unused apps to give more system space - to no avail. Suggestions?
Thanks - & Happy New Year
Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Virtual keyboards and landscape view
Recently I had to reinstall the software on my Torch because something went wrong after I downlaoded an app and my phone kept continuously rebooting in a loop. Since reinstalling the software, though, I have noticed some things that are different and one is that the virtual keyboard never appears anymore. Not only that but the phone does not seem to be able to change to landscape view anymore, except when viewing a YouTube video. And lately, the YouTube videos stop part way through and never start back up again, as they do when just buffering temporarily.
Is there something missing from the software I downloaded? Is there a special version of the OS6 that is just for the Torch?Hello Bluerosequeen,
Sorry to hear about your issue.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
Thanks for any and all feedback-
stratman1I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?
-
Landscape view/keyboard for Mail and SMS...
Does anybody know if there is anything in the works to give us larger handed iPhone 3G users the ability to turn the phone sideways for a landscape view and slightly larger keyboard when typing in SMS or Mail like we have in landscape view when typing in Safari?
Message was edited by: jaytizzle
Message was edited by: jaytizzleThanks for the links. This was the main (read: only) reason for me not getting the iPhone.
I love just about everything about it and I have everything mac at home and a mobileme account so the iPhone would complement my needs very well, or so I thought till I used a friend's iPhone for a couple of days.
Typing emails and using SMS with the keyboard in portrait mode was painful. My fingers aren't that large but found myself spending more time correcting than actually typing. In safari I loved the landscape orientation for typing. I think this is a major oversight by apple.
I waited till this past week to see if apple releases an update to address this (what with all the feedback people are leaving on boards and forums about this problem), but nothing showed up so I bit the bullet and got myself a Blackberry Bold.
This was a deal breaker for me. Maybe when they address it I might try out an iPhone in the future. -
Problem with Virtual Keyboard in Apple Apps?
I am using an iPad 3 and have had Numbers and Pages apps since my iPad 1. I am suddenly having a problem with the virtual keyboard covering/hiding the text box where you type. For example, in Numbers: I double tap to type something in a cell and the keyboard comes up but the text box where it shows what you are typing is behind the keyboard. I haven't seen anyone else mention this problem. I have tried it both in landscape and letter orientation. I have deleted the app from my iPad and reinstalled it but that doesn't change anything. This is also happening in these apps on my iPhone 5. This started happening after the last OS upgrade. Anyone have any ideas? Is anyone else experiencing this problem?
No, I haven't seen that on iOS 6.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off". -
Keyboard portrait view, some letters won't work. Help?
When I'm on the keyboard using my iPod touch 8gb 3rd generation, on portrait view, the letters B, H, J, and U won't work. Buut when I have it on landscape view the work fine. Also when I try to unlock it, it takes a view slides before it will actually slide and unlock. I've tried powering down and resetting, but that doesn't help. I haven't dropped it or done any damage to it recently, it just started acting like this. Any suggestions beside sending it in for repairs or getting a new one?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since you say you have iOS 4.2.1 that likely means you have a 2G iPod. It is likely not worth getting a 2G repaired. -
Can't seem to flip the landscape view when in email
When my wife uses her ipad, the email shows in portrait and landscape BUT we have a keyboard and the landscape view needs to be flipped 180....all other apps seem to do this...any ideas?
Hi Stan, thanks for the quick reply, I took your advice and did the build as an image and then burned the project at the recommended write speeds in Toast Titanium (10.0.9). The first burn was at 4x and the second was at 2x BD (an option in Toast) both speeds gave me the same result. It solved the issue with the freezing during disc playback, however, when I tried to navigate from chapter to chapter the disc, once again, freezes. Additionally, although it doesn't freeze during playback as with my previous burns, there's still slight skip at the same positions where there used to be a freeze.
I'd be content at this point with the slight skip, but it's been one issue after another with these BluRay authoring projects. This is my first project switching from FCP and I've burned 11 Bluray discs on this project and still don't have a deliverable project that I can give to my client. Not what I was expecting from Encore. Any help would be greatly appreciated. -
This morning when I got the X it worked perfectly, except for a small contact transferring problem. But other than that it was good, until I calibrated the compass, after I did that I cannot view things that go from portrait to landscape when you tilt the phone in landscape mode. The accelerometer still works but I cannot use the landscape keyboard or anything that isn't already in landscape view. So is anyone experiencing this? And if you are have you found a fix, cause it is really annoying and I love my landscape keyboard
Have you tried to turn your device to the left instead of the right to have your screen change to landscape mode? The screen will only change to landscape mode when the device is turned to the left. To do this, move the top of the device to the left instead of the right to view screen in landscape mode.
HTH, -
Is there a Virtual keyboard for logging into online accounts securely?
Does OS X offer a Virtual keyboard for logging into online accounts safely and securely? (bank accounts and email accounts and other membership accounts)
If not, does anyone know of such a program designed for OS X?
Thank you.That worked. Thank you.
System Prefs >
International button >
Input Menu Tab >
Choose "Show Input Menu in Menu Bar" checkbox >
Choose "Keyboard Viewer" checkbox >
Close System Prefs >
Chose "Show Keyboard Viewer" in Menu Bar of USA Flag -
How to install Virtual Keyboard with Different language ?
HI,
How to install Virtual Keyboard with Different language (Arabic) in MacBook Pro ( Mac OS X v10.5.8 Leopard).
Thanks,How to install Virtual Keyboard with Different language (Arabic) in MacBook Pro ( Mac OS X v10.5.8 Leopard).
What are you talking about exactly?
OS X comes with a virtual keyboard already. It is called Keyboard Viewer. You activate it by going to system prefs/international/input menu and checking its box (plus the box for Show Input Menu in Finder). At the same time you can check the boxes for the Arabic keyboard layouts.
You can then select the Arabic keyboard layouts and the Keyboard Viewer from the "flag" menu at the top-right of the Finder.
Let us know if you have further questions. If you are talking about some specific non-Apple app, could you provide the url? -
My iPod touch is stuck in landscape view. Even when held vertically if I open facebook or safari is rotates to landscape. Have tried turning on and off, same results. Any ideas to fix?
Try switching it back from landscape to vertical. Or, go to settings and see if you have any special setting turned on that enable only landscape view. Also, try hooking it up to your computer and charging it to see what happens.
-
How do I implement a virtual keyboard? I will compensate for assistance.
I have created a simple Adobe Air Windowed Application. The application uses the mx:HTML controls to load a web page inside my application. I have tried other means to load the web page but due to formatting issue, all other methods fail to load the page correctly. Any solution will need to use the mx HTML controls.
I have added a virtual keyboard to my project. However, when I enter a text field and then select a key on the virtual keyboard, I lose focus on the text field.
I understand the concept of event listeners and using a variable to store the text field id and using a focus event to gain the id of the text field. However, I am not a programmer by no means and this is way above my head. I am looking for someone to spend 30 or 60 minutes adding the needed code to my project so I can use the virtual keyboard. I would be willing to send someone a gift card to their favorite restaurant as compensation.
I have included the 4 files that make up my project (File names are in read text).
Your help will be greatly appreciated.
Best regards,
Joe
Main.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:components="com.uibuzz.components.*"
xmlns:local="*"
xmlns:keyboard=".*"
xmlns:panel=".*"
showStatusBar="false"
alwaysInFront="true"
creationComplete="RunFunction(event)">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected function RunFunction(event:FlexEvent):void
nativeWindow.x = (Capabilities.screenResolutionX - nativeWindow.width) / 2;
nativeWindow.y = (Capabilities.screenResolutionY - nativeWindow.height) / 2;
// Mouse.hide();
html.location = 'https://google.com';
]]>
</fx:Script>
<fx:Script>
<![CDATA[
// Virtual Keyboard
import com.uibuzz.events.VirtualKeyboardEvent;
protected function HandleKeyEvent(event:VirtualKeyboardEvent):void
trace("Key pressed: " + event.keyLabel);
]]>
</fx:Script>
<mx:HTML id="html"
paintsDefaultBackground="false"
width="100%"
height="100%" x="0" y="0"/>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<components:VirtualKeyboard x="325" y="770" KeyClicked="HandleKeyEvent(event)"/>
</s:WindowedApplication>
Main-app.aml
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/2.5">
<!-- Adobe AIR Application Descriptor File Template.
Specifies parameters for identifying, installing, and launching AIR applications.
xmlns - The Adobe AIR namespace: http://ns.adobe.com/air/application/2.5
The last segment of the namespace specifies the version
of the AIR runtime required for this application to run.
minimumPatchLevel - The minimum patch level of the AIR runtime required to run
the application. Optional.
-->
<!-- A universally unique application identifier. Must be unique across all AIR applications.
Using a reverse DNS-style name as the id is recommended. (Eg. com.example.ExampleApplication.) Required. -->
<id>Main</id>
<!-- Used as the filename for the application. Required. -->
<filename>Virtual Keyboard</filename>
<!-- The name that is displayed in the AIR application installer.
May have multiple values for each language. See samples or xsd schema file. Optional. -->
<name></name>
<!-- A string value of the format <0-999>.<0-999>.<0-999> that represents application version which can be used to check for application upgrade.
Values can also be 1-part or 2-part. It is not necessary to have a 3-part value.
An updated version of application must have a versionNumber value higher than the previous version. Required for namespace >= 2.5 . -->
<versionNumber>1.0.0</versionNumber>
<!-- A string value (such as "v1", "2.5", or "Alpha 1") that represents the version of the application, as it should be shown to users. Optional. -->
<!-- <versionLabel></versionLabel> -->
<!-- Description, displayed in the AIR application installer.
May have multiple values for each language. See samples or xsd schema file. Optional. -->
<!-- <description></description> -->
<!-- Copyright information. Optional -->
<!-- <copyright></copyright> -->
<!-- Publisher ID. Used if you're updating an application created prior to 1.5.3 -->
<!-- <publisherID></publisherID> -->
<!-- Settings for the application's initial window. Required. -->
<initialWindow>
<!-- The main SWF or HTML file of the application. Required. -->
<!-- Note: In Flash Builder, the SWF reference is set automatically. -->
<content>[This value will be overwritten by Flash Builder in the output app.xml]</content>
<!-- The title of the main window. Optional. -->
<!-- <title></title> -->
<!-- The type of system chrome to use (either "standard" or "none"). Optional. Default standard. -->
<systemChrome>none</systemChrome>
<!-- Whether the window is transparent. Only applicable when systemChrome is none. Optional. Default false. -->
<transparent>false</transparent>
<!-- Whether the window is initially visible. Optional. Default false. -->
<visible>false</visible>
<!-- Whether the user can minimize the window. Optional. Default true. -->
<minimizable>false</minimizable>
<!-- Whether the user can maximize the window. Optional. Default true. -->
<maximizable>false</maximizable>
<!-- Whether the user can resize the window. Optional. Default true. -->
<resizable>false</resizable>
<!-- The window's initial width in pixels. Optional. -->
<width>1280</width>
<!-- The window's initial height in pixels. Optional. -->
<height>1024</height>
<!-- The window's initial x position. Optional. -->
<!-- <x></x> -->
<!-- The window's initial y position. Optional. -->
<!-- <y></y> -->
<!-- The window's minimum size, specified as a width/height pair in pixels, such as "400 200". Optional. -->
<minSize>1280 1024</minSize>
<!-- <minSize>1024 768</minSize> -->
<!-- The window's initial maximum size, specified as a width/height pair in pixels, such as "1600 1200". Optional. -->
<maxSize>1280 1024</maxSize>
<!-- <maxSize>1024 768</maxSize> -->
</initialWindow>
<!-- We recommend omitting the supportedProfiles element, -->
<!-- which in turn permits your application to be deployed to all -->
<!-- devices supported by AIR. If you wish to restrict deployment -->
<!-- (i.e., to only mobile devices) then add this element and list -->
<!-- only the profiles which your application does support. -->
<!-- <supportedProfiles>desktop extendedDesktop mobileDevice extendedMobileDevice</supportedProfiles> -->
<!-- The subpath of the standard default installation location to use. Optional. -->
<!-- <installFolder></installFolder> -->
<!-- The subpath of the Programs menu to use. (Ignored on operating systems without a Programs menu.) Optional. -->
<!-- <programMenuFolder></programMenuFolder> -->
<!-- The icon the system uses for the application. For at least one resolution,
specify the path to a PNG file included in the AIR package. Optional. -->
<!-- <icon>
<image16x16></image16x16>
<image32x32></image32x32>
<image36x36></image36x36>
<image48x48></image48x48>
<image72x72></image72x72>
<image128x128></image128x128>
</icon> -->
<!-- Whether the application handles the update when a user double-clicks an update version
of the AIR file (true), or the default AIR application installer handles the update (false).
Optional. Default false. -->
<!-- <customUpdateUI></customUpdateUI> -->
<!-- Whether the application can be launched when the user clicks a link in a web browser.
Optional. Default false. -->
<!-- <allowBrowserInvocation></allowBrowserInvocation> -->
<!-- Listing of file types for which the application can register. Optional. -->
<!-- <fileTypes> -->
<!-- Defines one file type. Optional. -->
<!-- <fileType> -->
<!-- The name that the system displays for the registered file type. Required. -->
<!-- <name></name> -->
<!-- The extension to register. Required. -->
<!-- <extension></extension> -->
<!-- The description of the file type. Optional. -->
<!-- <description></description> -->
<!-- The MIME content type. -->
<!-- <contentType></contentType> -->
<!-- The icon to display for the file type. Optional. -->
<!-- <icon>
<image16x16></image16x16>
<image32x32></image32x32>
<image48x48></image48x48>
<image128x128></image128x128>
</icon> -->
<!-- </fileType> -->
<!-- </fileTypes> -->
<!-- Specify Android specific tags that get passed to AndroidManifest.xml file. -->
<!--<android>
<manifestAdditions>
<![CDATA[
<manifest android:installLocation="auto">
<uses-permission android:name="android.permission.INTERNET"/>
<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/>
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/>
<uses-configuration android:reqFiveWayNav="true"/>
<supports-screens android:normalScreens="true"/>
<uses-feature android:required="true" android:name="android.hardware.touchscreen.multitouch"/>
<application android:enabled="true">
<activity android:excludeFromRecents="false">
<intent-filter>
<action android:name="android.intent.action.MAIN"/>
<category android:name="android.intent.category.LAUNCHER"/>
</intent-filter>
</activity>
</application>
</manifest>
]]>
</manifestAdditions>
</android> -->
<!-- End of the schema for adding the android specific tags in AndroidManifest.xml file -->
</application>
VirtualKeyboardEvent.as
package com.uibuzz.events
import flash.events.Event;
public class VirtualKeyboardEvent extends Event
public var keyLabel:String;
public function VirtualKeyboardEvent(type:String)
super(type);
override public function clone():Event
var eventObj:VirtualKeyboardEvent = new VirtualKeyboardEvent(type);
eventObj.keyLabel = this.keyLabel;
return eventObj;
VirtualKeyboard.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
width="610" height="215" currentState="Lowercase">
<s:layout>
<s:BasicLayout/>
</s:layout>
<fx:Metadata>
[Event(name="KeyClicked", type="com.uibuzz.events.VirtualKeyboardEvent")]
</fx:Metadata>
<fx:Script>
<![CDATA[
import com.uibuzz.events.VirtualKeyboardEvent;
protected function handleShiftButton(event:MouseEvent):void
if (this.currentState == "Lowercase")
this.currentState = "Uppercase";
else
this.currentState = "Lowercase";
protected function handleButtonClick(event:MouseEvent):void
var e:VirtualKeyboardEvent = new VirtualKeyboardEvent("KeyClicked");
e.keyLabel = event.currentTarget.label;
dispatchEvent(e);
]]>
</fx:Script>
<s:states>
<s:State name="Lowercase"/>
<s:State name="Uppercase"/>
</s:states>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Button id="btn1" x="50" y="10" width="32" height="32" label="1"
click="handleButtonClick(event)"
label.Uppercase="!"/>
<s:Button id="btnTilde" x="10" y="10" width="32" height="32" label="`"
click="handleButtonClick(event)"
label.Uppercase="~"/>
<s:Button id="btn2" x="90" y="10" width="32" height="32" label="2"
click="handleButtonClick(event)"
label.Uppercase="@" fontSize.Uppercase="11"/>
<s:Button id="btn3" x="130" y="10" width="32" height="32" label="3"
click="handleButtonClick(event)"
label.Uppercase="#"/>
<s:Button id="btn4" x="170" y="10" width="32" height="32" label="4"
click="handleButtonClick(event)"
label.Uppercase="$"/>
<s:Button id="btn5" x="210" y="10" width="32" height="32" label="5"
click="handleButtonClick(event)"
label.Uppercase="%"/>
<s:Button id="btn6" x="250" y="10" width="32" height="32" label="6"
click="handleButtonClick(event)"
label.Uppercase="^"/>
<s:Button id="btn7" x="290" y="10" width="32" height="32" label="7"
click="handleButtonClick(event)"
label.Uppercase="&"/>
<s:Button id="btn8" x="330" y="10" width="32" height="32" label="8"
click="handleButtonClick(event)"
label.Uppercase="*"/>
<s:Button id="btn9" x="370" y="10" width="32" height="32" label="9"
click="handleButtonClick(event)"
label.Uppercase="("/>
<s:Button id="btn0" x="410" y="10" width="32" height="32" label="0"
click="handleButtonClick(event)"
label.Uppercase=")"/>
<s:Button id="btnMinus" x="450" y="10" width="32" height="32" label="-"
click="handleButtonClick(event)"
label.Uppercase="_"/>
<s:Button id="btnEquals" x="490" y="10" width="32" height="32" label="="
click="handleButtonClick(event)"
label.Uppercase="+"/>
<s:Button id="btnDelete" x="530" y="10" width="70" height="32" label="Delete" click="handleButtonClick(event)"/>
<s:Button id="btnEnter" x="530" y="90" width="70" height="32" label="Enter" click="handleButtonClick(event)"/>
<s:Button id="btnRightShift" x="510" y="130" width="70" height="32" label="Shift"
click="handleShiftButton(event)"/>
<s:Button id="btnLeftShift" x="30" y="130" width="70" height="32" label="Shift"
click="handleShiftButton(event)"/>
<s:Button id="btnTab" x="10" y="50" width="50" height="32" label="Tab" click="handleButtonClick(event)"/>
<s:Button id="btnQ" x="70" y="50" width="32" height="32" label="q"
click="handleButtonClick(event)"
label.Uppercase="Q"/>
<s:Button id="btnW" x="110" y="50" width="32" height="32" label="w"
click="handleButtonClick(event)"
label.Uppercase="W"/>
<s:Button id="btnE" x="150" y="50" width="32" height="32" label="e"
click="handleButtonClick(event)"
label.Uppercase="E"/>
<s:Button id="btnR" x="190" y="50" width="32" height="32" label="r"
click="handleButtonClick(event)"
label.Uppercase="R"/>
<s:Button id="btnT" x="230" y="50" width="32" height="32" label="t"
click="handleButtonClick(event)"
label.Uppercase="T"/>
<s:Button id="btnY" x="270" y="50" width="32" height="32" label="y"
click="handleButtonClick(event)"
label.Uppercase="Y"/>
<s:Button id="btnU" x="310" y="50" width="32" height="32" label="u"
click="handleButtonClick(event)"
label.Uppercase="U"/>
<s:Button id="btnI" x="350" y="50" width="32" height="32" label="i"
click="handleButtonClick(event)"
label.Uppercase="I"/>
<s:Button id="btnO" x="390" y="50" width="32" height="32" label="o"
click="handleButtonClick(event)"
label.Uppercase="O"/>
<s:Button id="btnP" x="430" y="50" width="32" height="32" label="p"
click="handleButtonClick(event)"
label.Uppercase="P"/>
<s:Button id="btnLeftBracket" x="470" y="50" width="32" height="32" label="["
click="handleButtonClick(event)"
label.Uppercase="{"/>
<s:Button id="btnRightBracket" x="510" y="50" width="32" height="32" label="]"
click="handleButtonClick(event)"
label.Uppercase="}"/>
<s:Button id="btnBackSlash" x="550" y="50" width="32" height="32" label="\"
click="handleButtonClick(event)"
label.Uppercase="|"/>
<s:Button id="btnA" x="90" y="90" width="32" height="32" label="a"
click="handleButtonClick(event)"
label.Uppercase="A"/>
<s:Button id="btnS" x="130" y="90" width="32" height="32" label="s"
click="handleButtonClick(event)"
label.Uppercase="S"/>
<s:Button id="btnD" x="170" y="90" width="32" height="32" label="d"
click="handleButtonClick(event)"
label.Uppercase="D"/>
<s:Button id="btnF" x="210" y="90" width="32" height="32" label="f"
click="handleButtonClick(event)"
label.Uppercase="F"/>
<s:Button id="btnG" x="250" y="90" width="32" height="32" label="g"
click="handleButtonClick(event)"
label.Uppercase="G"/>
<s:Button id="btnH" x="290" y="90" width="32" height="32" label="h"
click="handleButtonClick(event)"
label.Uppercase="H"/>
<s:Button id="btnJ" x="330" y="90" width="32" height="32" label="j"
click="handleButtonClick(event)"
label.Uppercase="J"/>
<s:Button id="btnK" x="370" y="90" width="32" height="32" label="k"
click="handleButtonClick(event)"
label.Uppercase="K"/>
<s:Button id="btnL" x="410" y="90" width="32" height="32" label="l"
click="handleButtonClick(event)"
label.Uppercase="L"/>
<s:Button id="btnSemiColon" x="450" y="90" width="32" height="32" label=";"
click="handleButtonClick(event)"
label.Uppercase=":"/>
<s:Button id="btnQuote" x="490" y="90" width="32" height="32" label="'"
click="handleButtonClick(event)"
label.Uppercase="""/>
<s:Button id="btnZ" x="110" y="130" width="32" height="32" label="z"
click="handleButtonClick(event)"
label.Uppercase="Z"/>
<s:Button id="btnX" x="150" y="130" width="32" height="32" label="x"
click="handleButtonClick(event)"
label.Uppercase="X"/>
<s:Button id="btnC" x="190" y="130" width="32" height="32" label="c"
click="handleButtonClick(event)"
label.Uppercase="C"/>
<s:Button id="btnV" x="230" y="130" width="32" height="32" label="v"
click="handleButtonClick(event)"
label.Uppercase="V"/>
<s:Button id="btnB" x="270" y="130" width="32" height="32" label="b"
click="handleButtonClick(event)"
label.Uppercase="B"/>
<s:Button id="btnSpace" x="150" y="170" width="272" height="32" label="Space" click="handleButtonClick(event)"/>
<s:Button id="btnN" x="310" y="130" width="32" height="32" label="n"
click="handleButtonClick(event)"
label.Uppercase="N"/>
<s:Button id="btnM" x="350" y="130" width="32" height="32" label="m"
click="handleButtonClick(event)"
label.Uppercase="M"/>
<s:Button id="btnComma" x="390" y="130" width="32" height="32" label=","
click="handleButtonClick(event)"
label.Uppercase="<"/>
<s:Button id="btnStop" x="430" y="130" width="32" height="32" label="."
click="handleButtonClick(event)"
label.Uppercase=">"/>
<s:Button id="btnForwardSlash" x="470" y="130" width="32" height="32" label="/"
click="handleButtonClick(event)"
label.Uppercase="?"/>
</s:Group>I have created a simple Adobe Air Windowed Application. The application uses the mx:HTML controls to load a web page inside my application. I have tried other means to load the web page but due to formatting issue, all other methods fail to load the page correctly. Any solution will need to use the mx HTML controls.
I have added a virtual keyboard to my project. However, when I enter a text field and then select a key on the virtual keyboard, I lose focus on the text field.
I understand the concept of event listeners and using a variable to store the text field id and using a focus event to gain the id of the text field. However, I am not a programmer by no means and this is way above my head. I am looking for someone to spend 30 or 60 minutes adding the needed code to my project so I can use the virtual keyboard. I would be willing to send someone a gift card to their favorite restaurant as compensation.
I have included the 4 files that make up my project (File names are in read text).
Your help will be greatly appreciated.
Best regards,
Joe
Main.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:components="com.uibuzz.components.*"
xmlns:local="*"
xmlns:keyboard=".*"
xmlns:panel=".*"
showStatusBar="false"
alwaysInFront="true"
creationComplete="RunFunction(event)">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected function RunFunction(event:FlexEvent):void
nativeWindow.x = (Capabilities.screenResolutionX - nativeWindow.width) / 2;
nativeWindow.y = (Capabilities.screenResolutionY - nativeWindow.height) / 2;
// Mouse.hide();
html.location = 'https://google.com';
]]>
</fx:Script>
<fx:Script>
<![CDATA[
// Virtual Keyboard
import com.uibuzz.events.VirtualKeyboardEvent;
protected function HandleKeyEvent(event:VirtualKeyboardEvent):void
trace("Key pressed: " + event.keyLabel);
]]>
</fx:Script>
<mx:HTML id="html"
paintsDefaultBackground="false"
width="100%"
height="100%" x="0" y="0"/>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<components:VirtualKeyboard x="325" y="770" KeyClicked="HandleKeyEvent(event)"/>
</s:WindowedApplication>
Main-app.aml
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/2.5">
<!-- Adobe AIR Application Descriptor File Template.
Specifies parameters for identifying, installing, and launching AIR applications.
xmlns - The Adobe AIR namespace: http://ns.adobe.com/air/application/2.5
The last segment of the namespace specifies the version
of the AIR runtime required for this application to run.
minimumPatchLevel - The minimum patch level of the AIR runtime required to run
the application. Optional.
-->
<!-- A universally unique application identifier. Must be unique across all AIR applications.
Using a reverse DNS-style name as the id is recommended. (Eg. com.example.ExampleApplication.) Required. -->
<id>Main</id>
<!-- Used as the filename for the application. Required. -->
<filename>Virtual Keyboard</filename>
<!-- The name that is displayed in the AIR application installer.
May have multiple values for each language. See samples or xsd schema file. Optional. -->
<name></name>
<!-- A string value of the format <0-999>.<0-999>.<0-999> that represents application version which can be used to check for application upgrade.
Values can also be 1-part or 2-part. It is not necessary to have a 3-part value.
An updated version of application must have a versionNumber value higher than the previous version. Required for namespace >= 2.5 . -->
<versionNumber>1.0.0</versionNumber>
<!-- A string value (such as "v1", "2.5", or "Alpha 1") that represents the version of the application, as it should be shown to users. Optional. -->
<!-- <versionLabel></versionLabel> -->
<!-- Description, displayed in the AIR application installer.
May have multiple values for each language. See samples or xsd schema file. Optional. -->
<!-- <description></description> -->
<!-- Copyright information. Optional -->
<!-- <copyright></copyright> -->
<!-- Publisher ID. Used if you're updating an application created prior to 1.5.3 -->
<!-- <publisherID></publisherID> -->
<!-- Settings for the application's initial window. Required. -->
<initialWindow>
<!-- The main SWF or HTML file of the application. Required. -->
<!-- Note: In Flash Builder, the SWF reference is set automatically. -->
<content>[This value will be overwritten by Flash Builder in the output app.xml]</content>
<!-- The title of the main window. Optional. -->
<!-- <title></title> -->
<!-- The type of system chrome to use (either "standard" or "none"). Optional. Default standard. -->
<systemChrome>none</systemChrome>
<!-- Whether the window is transparent. Only applicable when systemChrome is none. Optional. Default false. -->
<transparent>false</transparent>
<!-- Whether the window is initially visible. Optional. Default false. -->
<visible>false</visible>
<!-- Whether the user can minimize the window. Optional. Default true. -->
<minimizable>false</minimizable>
<!-- Whether the user can maximize the window. Optional. Default true. -->
<maximizable>false</maximizable>
<!-- Whether the user can resize the window. Optional. Default true. -->
<resizable>false</resizable>
<!-- The window's initial width in pixels. Optional. -->
<width>1280</width>
<!-- The window's initial height in pixels. Optional. -->
<height>1024</height>
<!-- The window's initial x position. Optional. -->
<!-- <x></x> -->
<!-- The window's initial y position. Optional. -->
<!-- <y></y> -->
<!-- The window's minimum size, specified as a width/height pair in pixels, such as "400 200". Optional. -->
<minSize>1280 1024</minSize>
<!-- <minSize>1024 768</minSize> -->
<!-- The window's initial maximum size, specified as a width/height pair in pixels, such as "1600 1200". Optional. -->
<maxSize>1280 1024</maxSize>
<!-- <maxSize>1024 768</maxSize> -->
</initialWindow>
<!-- We recommend omitting the supportedProfiles element, -->
<!-- which in turn permits your application to be deployed to all -->
<!-- devices supported by AIR. If you wish to restrict deployment -->
<!-- (i.e., to only mobile devices) then add this element and list -->
<!-- only the profiles which your application does support. -->
<!-- <supportedProfiles>desktop extendedDesktop mobileDevice extendedMobileDevice</supportedProfiles> -->
<!-- The subpath of the standard default installation location to use. Optional. -->
<!-- <installFolder></installFolder> -->
<!-- The subpath of the Programs menu to use. (Ignored on operating systems without a Programs menu.) Optional. -->
<!-- <programMenuFolder></programMenuFolder> -->
<!-- The icon the system uses for the application. For at least one resolution,
specify the path to a PNG file included in the AIR package. Optional. -->
<!-- <icon>
<image16x16></image16x16>
<image32x32></image32x32>
<image36x36></image36x36>
<image48x48></image48x48>
<image72x72></image72x72>
<image128x128></image128x128>
</icon> -->
<!-- Whether the application handles the update when a user double-clicks an update version
of the AIR file (true), or the default AIR application installer handles the update (false).
Optional. Default false. -->
<!-- <customUpdateUI></customUpdateUI> -->
<!-- Whether the application can be launched when the user clicks a link in a web browser.
Optional. Default false. -->
<!-- <allowBrowserInvocation></allowBrowserInvocation> -->
<!-- Listing of file types for which the application can register. Optional. -->
<!-- <fileTypes> -->
<!-- Defines one file type. Optional. -->
<!-- <fileType> -->
<!-- The name that the system displays for the registered file type. Required. -->
<!-- <name></name> -->
<!-- The extension to register. Required. -->
<!-- <extension></extension> -->
<!-- The description of the file type. Optional. -->
<!-- <description></description> -->
<!-- The MIME content type. -->
<!-- <contentType></contentType> -->
<!-- The icon to display for the file type. Optional. -->
<!-- <icon>
<image16x16></image16x16>
<image32x32></image32x32>
<image48x48></image48x48>
<image128x128></image128x128>
</icon> -->
<!-- </fileType> -->
<!-- </fileTypes> -->
<!-- Specify Android specific tags that get passed to AndroidManifest.xml file. -->
<!--<android>
<manifestAdditions>
<![CDATA[
<manifest android:installLocation="auto">
<uses-permission android:name="android.permission.INTERNET"/>
<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/>
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/>
<uses-configuration android:reqFiveWayNav="true"/>
<supports-screens android:normalScreens="true"/>
<uses-feature android:required="true" android:name="android.hardware.touchscreen.multitouch"/>
<application android:enabled="true">
<activity android:excludeFromRecents="false">
<intent-filter>
<action android:name="android.intent.action.MAIN"/>
<category android:name="android.intent.category.LAUNCHER"/>
</intent-filter>
</activity>
</application>
</manifest>
]]>
</manifestAdditions>
</android> -->
<!-- End of the schema for adding the android specific tags in AndroidManifest.xml file -->
</application>
VirtualKeyboardEvent.as
package com.uibuzz.events
import flash.events.Event;
public class VirtualKeyboardEvent extends Event
public var keyLabel:String;
public function VirtualKeyboardEvent(type:String)
super(type);
override public function clone():Event
var eventObj:VirtualKeyboardEvent = new VirtualKeyboardEvent(type);
eventObj.keyLabel = this.keyLabel;
return eventObj;
VirtualKeyboard.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
width="610" height="215" currentState="Lowercase">
<s:layout>
<s:BasicLayout/>
</s:layout>
<fx:Metadata>
[Event(name="KeyClicked", type="com.uibuzz.events.VirtualKeyboardEvent")]
</fx:Metadata>
<fx:Script>
<![CDATA[
import com.uibuzz.events.VirtualKeyboardEvent;
protected function handleShiftButton(event:MouseEvent):void
if (this.currentState == "Lowercase")
this.currentState = "Uppercase";
else
this.currentState = "Lowercase";
protected function handleButtonClick(event:MouseEvent):void
var e:VirtualKeyboardEvent = new VirtualKeyboardEvent("KeyClicked");
e.keyLabel = event.currentTarget.label;
dispatchEvent(e);
]]>
</fx:Script>
<s:states>
<s:State name="Lowercase"/>
<s:State name="Uppercase"/>
</s:states>
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<s:Button id="btn1" x="50" y="10" width="32" height="32" label="1"
click="handleButtonClick(event)"
label.Uppercase="!"/>
<s:Button id="btnTilde" x="10" y="10" width="32" height="32" label="`"
click="handleButtonClick(event)"
label.Uppercase="~"/>
<s:Button id="btn2" x="90" y="10" width="32" height="32" label="2"
click="handleButtonClick(event)"
label.Uppercase="@" fontSize.Uppercase="11"/>
<s:Button id="btn3" x="130" y="10" width="32" height="32" label="3"
click="handleButtonClick(event)"
label.Uppercase="#"/>
<s:Button id="btn4" x="170" y="10" width="32" height="32" label="4"
click="handleButtonClick(event)"
label.Uppercase="$"/>
<s:Button id="btn5" x="210" y="10" width="32" height="32" label="5"
click="handleButtonClick(event)"
label.Uppercase="%"/>
<s:Button id="btn6" x="250" y="10" width="32" height="32" label="6"
click="handleButtonClick(event)"
label.Uppercase="^"/>
<s:Button id="btn7" x="290" y="10" width="32" height="32" label="7"
click="handleButtonClick(event)"
label.Uppercase="&"/>
<s:Button id="btn8" x="330" y="10" width="32" height="32" label="8"
click="handleButtonClick(event)"
label.Uppercase="*"/>
<s:Button id="btn9" x="370" y="10" width="32" height="32" label="9"
click="handleButtonClick(event)"
label.Uppercase="("/>
<s:Button id="btn0" x="410" y="10" width="32" height="32" label="0"
click="handleButtonClick(event)"
label.Uppercase=")"/>
<s:Button id="btnMinus" x="450" y="10" width="32" height="32" label="-"
click="handleButtonClick(event)"
label.Uppercase="_"/>
<s:Button id="btnEquals" x="490" y="10" width="32" height="32" label="="
click="handleButtonClick(event)"
label.Uppercase="+"/>
<s:Button id="btnDelete" x="530" y="10" width="70" height="32" label="Delete" click="handleButtonClick(event)"/>
<s:Button id="btnEnter" x="530" y="90" width="70" height="32" label="Enter" click="handleButtonClick(event)"/>
<s:Button id="btnRightShift" x="510" y="130" width="70" height="32" label="Shift"
click="handleShiftButton(event)"/>
<s:Button id="btnLeftShift" x="30" y="130" width="70" height="32" label="Shift"
click="handleShiftButton(event)"/>
<s:Button id="btnTab" x="10" y="50" width="50" height="32" label="Tab" click="handleButtonClick(event)"/>
<s:Button id="btnQ" x="70" y="50" width="32" height="32" label="q"
click="handleButtonClick(event)"
label.Uppercase="Q"/>
<s:Button id="btnW" x="110" y="50" width="32" height="32" label="w"
click="handleButtonClick(event)"
label.Uppercase="W"/>
<s:Button id="btnE" x="150" y="50" width="32" height="32" label="e"
click="handleButtonClick(event)"
label.Uppercase="E"/>
<s:Button id="btnR" x="190" y="50" width="32" height="32" label="r"
click="handleButtonClick(event)"
label.Uppercase="R"/>
<s:Button id="btnT" x="230" y="50" width="32" height="32" label="t"
click="handleButtonClick(event)"
label.Uppercase="T"/>
<s:Button id="btnY" x="270" y="50" width="32" height="32" label="y"
click="handleButtonClick(event)"
label.Uppercase="Y"/>
<s:Button id="btnU" x="310" y="50" width="32" height="32" label="u"
click="handleButtonClick(event)"
label.Uppercase="U"/>
<s:Button id="btnI" x="350" y="50" width="32" height="32" label="i"
click="handleButtonClick(event)"
label.Uppercase="I"/>
<s:Button id="btnO" x="390" y="50" width="32" height="32" label="o"
click="handleButtonClick(event)"
label.Uppercase="O"/>
<s:Button id="btnP" x="430" y="50" width="32" height="32" label="p"
click="handleButtonClick(event)"
label.Uppercase="P"/>
<s:Button id="btnLeftBracket" x="470" y="50" width="32" height="32" label="["
click="handleButtonClick(event)"
label.Uppercase="{"/>
<s:Button id="btnRightBracket" x="510" y="50" width="32" height="32" label="]"
click="handleButtonClick(event)"
label.Uppercase="}"/>
<s:Button id="btnBackSlash" x="550" y="50" width="32" height="32" label="\"
click="handleButtonClick(event)"
label.Uppercase="|"/>
<s:Button id="btnA" x="90" y="90" width="32" height="32" label="a"
click="handleButtonClick(event)"
label.Uppercase="A"/>
<s:Button id="btnS" x="130" y="90" width="32" height="32" label="s"
click="handleButtonClick(event)"
label.Uppercase="S"/>
<s:Button id="btnD" x="170" y="90" width="32" height="32" label="d"
click="handleButtonClick(event)"
label.Uppercase="D"/>
<s:Button id="btnF" x="210" y="90" width="32" height="32" label="f"
click="handleButtonClick(event)"
label.Uppercase="F"/>
<s:Button id="btnG" x="250" y="90" width="32" height="32" label="g"
click="handleButtonClick(event)"
label.Uppercase="G"/>
<s:Button id="btnH" x="290" y="90" width="32" height="32" label="h"
click="handleButtonClick(event)"
label.Uppercase="H"/>
<s:Button id="btnJ" x="330" y="90" width="32" height="32" label="j"
click="handleButtonClick(event)"
label.Uppercase="J"/>
<s:Button id="btnK" x="370" y="90" width="32" height="32" label="k"
click="handleButtonClick(event)"
label.Uppercase="K"/>
<s:Button id="btnL" x="410" y="90" width="32" height="32" label="l"
click="handleButtonClick(event)"
label.Uppercase="L"/>
<s:Button id="btnSemiColon" x="450" y="90" width="32" height="32" label=";"
click="handleButtonClick(event)"
label.Uppercase=":"/>
<s:Button id="btnQuote" x="490" y="90" width="32" height="32" label="'"
click="handleButtonClick(event)"
label.Uppercase="""/>
<s:Button id="btnZ" x="110" y="130" width="32" height="32" label="z"
click="handleButtonClick(event)"
label.Uppercase="Z"/>
<s:Button id="btnX" x="150" y="130" width="32" height="32" label="x"
click="handleButtonClick(event)"
label.Uppercase="X"/>
<s:Button id="btnC" x="190" y="130" width="32" height="32" label="c"
click="handleButtonClick(event)"
label.Uppercase="C"/>
<s:Button id="btnV" x="230" y="130" width="32" height="32" label="v"
click="handleButtonClick(event)"
label.Uppercase="V"/>
<s:Button id="btnB" x="270" y="130" width="32" height="32" label="b"
click="handleButtonClick(event)"
label.Uppercase="B"/>
<s:Button id="btnSpace" x="150" y="170" width="272" height="32" label="Space" click="handleButtonClick(event)"/>
<s:Button id="btnN" x="310" y="130" width="32" height="32" label="n"
click="handleButtonClick(event)"
label.Uppercase="N"/>
<s:Button id="btnM" x="350" y="130" width="32" height="32" label="m"
click="handleButtonClick(event)"
label.Uppercase="M"/>
<s:Button id="btnComma" x="390" y="130" width="32" height="32" label=","
click="handleButtonClick(event)"
label.Uppercase="<"/>
<s:Button id="btnStop" x="430" y="130" width="32" height="32" label="."
click="handleButtonClick(event)"
label.Uppercase=">"/>
<s:Button id="btnForwardSlash" x="470" y="130" width="32" height="32" label="/"
click="handleButtonClick(event)"
label.Uppercase="?"/>
</s:Group> -
Why doesn't the virtual keyboard work with firefox on my dell venue 8 pro windows 8.1 tablet?
When I try to enter text in any text-entry box, i.e, in the url , search, or on a website, the virtual keyboard doesn't activate. I have to manually activate and deactivate it. It works for Google Chrome, but sadly not for firefox, my preferred browser. The tablet is up-to-date with the latest drivers and updates.
Thanks for the reply. No, it's the virtual keyboard that is integrated into window 8.1. I haven't installed any 3rd party keyboards
-
Yoga 2 Pro No Virtual Keyboard in Tablet Mode?
I can't find a way to get a virtual keyboard to come up when Yoga 2 Pro is in tablet mode...even when I click on a search box in my browser or any other text box nothing comes up. Is there a way to make a touch keyboard come up so you can still type?
Many thanks!Hi. Here it is. I tried to record the off/on process of this problem. On the seond part i typing in notepad and you can see interuption of letters.
https://yadi.sk/i/3GBZepRabSEpf
Problem is still not solved -
Yoga 2 11. Virtual keyboard in Tablet mode
Hi.
Yoga 2 11 and Windows 8.1 is entirley new to me, so please excuse my lack of knowledge.
When PC is asleep in tablet mode, I cannot get the virtual keyboard in order to log in. When I try to type, it pops up for a second or so (varies in time), but then shrinks back down.
Has anyone see this and is there any way I can sort it out without refreshing Windows? The amount of work to do in reloading programmes and apps is just too painful. If anyone can help I'd be very grateful.
Thanks
RobHi Alaa
Many thanks.
No actually - I haven't set a restore point, or even thought of doing that. It was Lenovo support that suggested a Windows refresh but when I saw that I would have to re-load apps etc., I backed out. I've done too much for that.
Are you suggesting that if I set a restore point, then I would keep everything already installed?
I now notice that under some circumstances the virtual keyboard pops up. For example it came up when I experimented by trying to answer this in tablet mode. It didn't do it the first time but when I was folding back, it suddenly and randomly came up. Also I was able to search on Maps with a virtual keyboard. But no way will it let me log on.To begin with, (first time I try in a session), it seems to wait until it detects my hand over it, and then disappears into its shell!
Thanks
Rob
Maybe you are looking for
-
Best practices to design OWB Process Flows
Hi All, I am using OWB to develop historical data warehouse. For this I have created few mappings that load data from source tables to staging tables and then from staging to target tables. Now I am designing process flows to execute these mappings.
-
Why do only some of my photos show up in apps like instagram
When I try to post a picture on instagram and some other apps, its says I have about 100 photos in the "all photos" folder, when really I have 2 thousand. The pictures that are showing up are about half my most recent photos, then a lot of totally ra
-
the maximum number of free accounts have been activated on this iphone and i need create accound but i can't :/ please anyone tell me what i do to solve this problem
-
Controlling Export Video Options in Lingo?
Can the Export Video Options in Director be controlled with lingo? If so where can I find this documentation. Thanks, Wyn
-
its taking forever!!! left it updating for about 6 hours and its stuck on the same place as when i left it. "restoring iphone software" any help of what to do would be much appreciated. going to leave it over night but if its not sorted by the mornin