Virtual Machine startup problem: Set CPU Cap: failed

Hi,
Recently, I have installed Oracle VM Server 2.2.2 on two servers having common Repository. I've configured 3 disks as repository.
[root@ec-vs01 ~]# /opt/ovs-agent-2.3/utils/repos.py -l
[   ] 692dbfde-9af4-49ef-9889-f02cb2e371e5 => /dev/sdc1
[ * ] 0e06a940-cd25-4e4d-a4a0-93afc3832a00 => /dev/sda1
[   ] 19101310-406a-4090-89ef-1be439e531dc => /dev/sdb1
Intallation of VM Machine also ended up without any issues. (O/S OEL 5.5).
When I restart the Virtual Machine after o/s installation, It runs for few minutes and stopped with the following error. ( Also, the console button is not active).
Start - /OVS/running_pool/250_ec-vptst01
PowerOn successfully.
Update server -10.10.140.181
Update Port - 0.0
Update VM Status - Running
Configure CPU Cap
Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '250_ec-vptst01', '-c', '0'] => Error: Domain '250_ec-vptst01' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap
run_cmd(args=['xm',
File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd
raise Exception('%s => %s' % (args, err))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVMConfig.py", line 1108, in set_vm_cpu_cap
if not rs.startswith("success"): raise Exception(rs)
if anybody resolved this issue, kindly help me.

Also, I've found the below.
Even though the repos.py -l script shows 2 repositories, df -h is not showing any repository mounted on /OVS folder
[root@ec-vs01 running_pool]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/cciss/c0d0p2 3.4G 982M 2.2G 31% /
/dev/cciss/c0d0p1 99M 46M 48M 50% /boot
tmpfs 291M 0 291M 0% /dev/shm
none 291M 80K 291M 1% /var/lib/xenstored
/dev/sda1 391G 8.4G 383G 3% /var/ovs/mount/0E06A940CD254E4DA4A093AFC3832A00
/dev/sdc1 196G 2.1G 194G 2% /var/ovs/mount/692DBFDE9AF449EF9889F02CB2E371E5
/dev/sdb1 391G 2.1G 389G 1% /var/ovs/mount/19101310406A409089EF1BE439E531DC
The Guest VM is created under /var/ovs/mount/0E06A940CD254E4DA4A093AFC3832A00/running_pool , whereas /OVS/running_pool contains nothing.
ls -l /OVS/running_pool/ shows nothing.
How to mount repository on /OVS folder ?

Similar Messages

  • Set CPU Cap: failed: Exception: failed: Exception: ['xm', 'sched-credit', '

    Hi what does this warning mean ?
    its OV 2.2 and OVM 2.2
    the server has 8 cpu and 24GB Ram
    from OVM ,
    I create the vm with example 1 or 2 cpu.
    then i start the vm, its starts.
    after then if i shut down the vm and starts again. i see bellow warning
    Configure CPU Cap
    Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '30_tdebian', '-c', '0'] => Error: Domain '30_tdebian' does not exist.
    >
    and from OVM, Console button will be grayed ..
    can any one advise me please
    thanks

    hi thanks
    I understand.
    debian is not supported.. but i need to do some test
    i have realised few things
    When i am trying debian from iso .. this problem starts
    but when i installed debian from fully virtualized Ethernet type then it giving the problem..
    so i have done is :
    i created the vm with fully vertualized Ethernet type. then i change it to paravertualize then complete the installation .. after that it did not give any trouble ..
    may be i was just lucky!! but i will try again..
    in one forum it was saying, installation from iso gives this trouble ...
    is that true ??

  • Importing a Hyper-V virtual machine into windows 8 hyper-v fails with a strange error

    Here is the error what i am suffering from, it fails and i dont know what this error is all about
    Saved State Errors
    The following saved state errors were reported... the processor settings for virtual machine....
    can some one help

    Hi,
    Could you offer more information about your error, such the original error message or screenshot, If meeting the Event 3080, you can refer the following related article for
    the further troubleshooting:
    Hyper-V Could Not Initialize - Could Not Create or Access Saved State File
    http://blogs.technet.com/b/rmilne/archive/2014/01/15/hyper-v-could-not-initialize-could-not-create-or-access-saved-state-file.aspx
    Hope 
    this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Virtual Machine installation problem

    I received the following error message while trying to create a virtual machine on my computer:  "the virtual machine configuration could not be created.  An unexpected error occurred."  How do I fix this problem?  I am running
    window 7 ultimate SP1 on an AMD FX 8320 8 core machine with 16 GB of RAM.

    Hi,
    can you describe what you are doing, please.
    I think we need some more Information:
    What are you doing? Converting? From what to what?
    Tool-Versions?
    Regards
    Eric
    Eric Berg -- http://www.ericberg.de -- MCSE: Private Cloud MCSE: Server Infrastructure MCSE: Desktop Infrastructure

  • Virtual Machine Printing Problem

    Hi
    I'm currently testing both VirtualBox & VMWare Fusion 6 on my Air with a Win XP Pro guest, and have an odd problem when printing from both of them.
    The printer is a shared network device running from my Win 7 PC, the VMs are set to share the Mac printer.
    Printing directly from the Mac works fine, but when I print from either XP VM nothing happens.
    When I open the print queue the file is paused awaiting authentication, I enter the correct password, save it to the keychain and it prints.
    However, when I try printing again the same thing happens, it always requires authentication.
    Would be grateful for any help with this.
    Thanks.

    Do you have the Network settings set for NAT or Bridged. My guess would be NAT.  Try setting it to Bridge mode and see if that solves your issue.
    If you already do have it as Bridged, then try NAT

  • Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

    I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
    Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
    When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
    Any suggestion on resolving this problem?
    Thanks
    Ikad

    Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
    Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
    http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
    Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
    to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
    Ikad

  • Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again.

    I uninstalled all System Center VVM related management Packs, but still received "Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again.".
    Think I got them all. But how can I figure out which Management pack is still installed and has to be removed.
    Thanks for your reply

    Got following logging about this problem.
    9/20/2013 9:35:09 AM] * Exception :  => Microsoft.EnterpriseManagement.Common.MonitoringException: This method from the System Center Operations Manager 2007 R2 SDK is not supported to work with System Center Operations Manager 2012. Please migrate
    to the System Center Operations Manager 2012 SDK.
       at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleIndigoExceptions(Exception ex)
       at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.ImportManagementPack(String managementPackXml, String keyToken, ManagementGroup managementGroup)
       at Microsoft.EnterpriseManagement.ManagementGroup.ImportManagementPack(ManagementPack managementPack)
       at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
    [9/20/2013 9:35:09 AM] * Exception :  => Setup encountered an error while importing management packs.Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management
    packs.Microsoft.VirtualManager.Utils.CarmineException: Setup encountered an error while importing management packs.
    Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
       at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
       at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
    *** Carmine error was: ManagementPackPresent (10208)
    [9/20/2013 9:35:09 AM] * Exception :  => Setup encountered an error while importing management packs.Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management
    packs.Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException: Setup encountered an error while importing management packs.
    Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs. ---> Microsoft.VirtualManager.Utils.CarmineException: Setup encountered an error while importing management
    packs.
    Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
       at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
       at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
    *** Carmine error was: ManagementPackPresent (10208)
       --- End of inner exception stack trace ---
       at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
       at Microsoft.VirtualManager.Setup.Wizard.VMInstaller.PreConfigure()
       at Microsoft.VirtualManager.Setup.Wizard.ProgressPage.InstallVm()
       at Microsoft.VirtualManager.Setup.Wizard.ProgressPage.InstallerThreadEntry()
    *** Carmine error was: ManagementPackPresent (10208)
    [9/20/2013 9:35:09 AM] *** Error : Setup encountered an error while importing management packs.
    Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
    ID: 10208
    [9/20/2013 9:35:10 AM] Information : Virtual Machine Manager Administrator Console installation has failed.

  • [SOLVED]Can't start Virtual Machine

    I installed virtual box and virtualbox-modules via pacman and launched 'sudo vboxbuild' but now wyen I try to start a virtual machine it gives me this error:
    "Failed to open a session for the virtual machine Ubuntu Server 11.10.
    Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
    Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND).
    One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND).
    Result Code: NS_ERROR_FAILURE (0x80004005)
    Component: Console
    Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb}"
    I tried to launch '/etc/init.d/vboxdrv setup' but it says that this directory or file does not exist.
    Last edited by giwrg98 (2012-04-19 08:17:36)

    giwrg98 wrote:
    skunktrader wrote:Installing virtualbox-modules installs ALL the prebuilt modules for the stock arch kernel.  You shouldn't need to run vboxbuild or vboxdrv setup unless you have a custom kernel
    https://wiki.archlinux.org/index.php/Vi … asic_setup
    I have already installed them.
    # modprobe vboxdrv
    # modprobe vboxnetflt
    and it should just work

  • Is it valuable for processor(CPU)  to use the instruction set of java virtual machine?

    I've got an idea that processor(CPU) would use an instruction set like java virtual machine instead of assembly language whose instruction includes MOV ,INC ,ADD AX, ....
    Thus this type of processor(CPU)  can support any java program just like Windows with a java virtual mache software package.
    Thus the operating system like Android, Windows Phone can be writen in Java. For embeding system with no operating system , programs  can also be writen in Java directly.

    Well, this is rather off-topic but… Sun once designed a Java-Core that was running Java natively, but they never went anywhere with it. Java code, when created  well, runs reasonably fast. It seems just that most of todays programmers don't know, what they're doing, when they're writing Java code.

  • Virtual Machine Failes to Start: Server execution failed (0x80080005).

    Hi
    I have a Windows 8.1 (with updates) System which was upgraded from Windows 8.0 using a Clean Install. Recently Hyper-V has stopped running on my system.
    The Event log shows an error:
    'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
    -     System
    -     Provider
                [ Name]     Microsoft-Windows-Hyper-V-VMMS
                [ Guid]     {6066F867-7CA1-4418-85FD-36E3F9C0600C}
        EventID     15500
        Version     0
        Level     2
        Task     0
        Opcode     0
        Keywords     0x8000000000000000
    -     TimeCreated
                [ SystemTime]     2014-07-17T07:57:28.568965100Z
        EventRecordID     302
        Correlation
    -     Execution
                [ ProcessID]     4040
                [ ThreadID]     1396
        Channel     Microsoft-Windows-Hyper-V-VMMS-Admin
        Computer     viveksasmung
    -     Security
                [ UserID]     S-1-5-18
    -     UserData
    -     VmlEventLog
        VmName     CentOS65
        VmId     9EF5529D-3755-40B3-AC6A-325A564D19BB
        ErrorMessage     %%2148007941
        ErrorCode     0x80080005
    The WMI-Activity log shows the error:
    Id = {00000000-0000-0000-0000-000000000000}; ClientMachine = VIVEKSASMUNG; User = viveksasmung\Vivek; ClientProcessId = 9756; Component = Core; Operation = Start IWbemServices::ExecNotificationQuery - root\virtualization\v2 : select * from __InstanceDeletionEvent
    within 2 where TargetInstance ISA 'Msvm_ComputerSystem' ; ResultCode = 0xC7F0FCD0; PossibleCause = Could not send status to client
    The Hyper-V-VMMS Admin Log shows the error:
    The worker process for virtual machine 'CentOS65' failed to respond within the startup timeout period and was restarted. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
    'CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
    The Hyper-V Worker Log shows the error:
    The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005). As a result, some WMI operations may not function correctly. To correct the problem, try restarting the Windows
    Management Instrumentation service.
    I set the Hyper-V Tracing to ON using vmconnect.config
    file and the error log is as follows:
    Tracing Hyper-V Client version: 6.3.0.0. Rough build date (virtman file written): 05/18/2014 23:25:02
    2014-07-17 01:55:28.990 [08] USER_ACTION_INITIATED VMBrowser ServerNode:ConnectToServer() Connecting to server localhost...
    2014-07-17 01:55:29.008 [08] USER_ACTION_COMPLETED VMBrowser ServerNode:ConnectToServer() Successfully connected to server.
    2014-07-17 01:55:29.463 [07] WARNING VirtMan WmiAssociation:GetRelatedObjects() The WMI object 'Msvm_RdvComponentSettingData' + could not be mapped to VirtMan type so ignore it.
    2014-07-17 01:55:33.001 [03] USER_ACTION_INITIATED VMBrowser ServerNodeViewControl:OnStartVm() Starting VM(s)...
    2014-07-17 01:55:33.023 [09] USER_ACTION_INITIATED VMBrowser VMActionBatchPerformer:Perform() Changing virtual machine '9EF5529D-3755-40B3-AC6A-325A564D19BB' ('CentOS65') state from 'PowerOff' to 'Running'
    2014-07-17 01:59:33.927 [12] ERROR VirtMan ThrowHelper:ThrowVirtualizationOperationFailedException() Operation 'SetState' failed with message ''CentOS65' failed to start.'.
        Error code '32768'.
        Detailed message ''CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
    'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)'.
    2014-07-17 01:59:33.930 [12] ERROR VMBrowser VMActionBatchPerformer:OnTaskCompleted() Tracked task operation failed!
        'CentOS65' failed to start.
           at Microsoft.Virtualization.Client.Management.ThrowHelper.ThrowVirtualizationOperationFailedException(String errorMsg, String errorDescriptionMsg, VirtualizationOperation operation, Int64 errorCode, Boolean operationCanceled,
    ErrorCodeMapper mapper, Exception innerException)
       at Microsoft.Virtualization.Client.Management.View.EndMethodReturnInternal(IVMTask task, VirtualizationOperation operation, Boolean affectedElementExpected)
       at Microsoft.Virtualization.Client.Management.VMComputerSystemBaseView.EndSetState(IVMTask setStateTask)
       at Microsoft.Virtualization.Client.VMBrowser.ChangeVMStatePerformer.EndTrackedTask(IVMTask task)
       at Microsoft.Virtualization.Client.VMBrowser.VMActionBatchPerformer.OnTaskCompleted(Object sender, EventArgs e)
    2014-07-17 01:59:46.103 [03] USER_ACTION_INITIATED VMBrowser ServerNode:DisconnectFromServer() Disconnecting from server localhost...
    2014-07-17 01:59:46.104 [03] USER_ACTION_COMPLETED VMBrowser ServerNode:DisconnectFromServer() Server had been disconnected successfully.
    Upon using BCDEdit, output is below
    Windows Boot Manager
    identifier              {bootmgr}
    device                  partition=\Device\HarddiskVolume1
    path                    \bootmgr
    description             Windows Boot Manager
    locale                  en-GB
    default                 {current}
    resumeobject            {37225af7-cc62-11e3-8277-806e6f6e6963}
    displayorder            {current}
                            {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
    timeout                 30
    Windows Boot Loader
    identifier              {current}
    device                  partition=C:
    path                    \Windows\system32\winload.exe
    description             Windows 8.1 Pro with Media Center
    locale                  en-GB
    recoverysequence        {3ce506df-cc90-11e3-8b9f-8a809d5a6432}
    recoveryenabled         Yes
    osdevice                partition=C:
    systemroot              \Windows
    resumeobject            {37225af7-cc62-11e3-8277-806e6f6e6963}
    bootmenupolicy          Legacy
    hypervisorlaunchtype    Auto
    quietboot               No
    Real-mode Boot Sector
    identifier              {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
    device                  partition=C:
    path                    \Hd0Par3.pbr
    description             Ubuntu LTS 14.04
    I have set permissions to the VHD folder using the command below
    icacls "c:\CentOS65\CentOS65" /grant "CREATOR OWNER":(OI)(CI)(IO)F
    icacls "c:\CentOS65\CentOS65" /grant "NT AUTHORITY\SYSTEM":(OI)(CI)F
    icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
    icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
    icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
    icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
    icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
    icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
    icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome_9E7FEF2E-85E0-4278-AABD-01D5E45EE643.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
    icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65_28FF0E50-0FBA-4754-A4CC-B3DAEC7E3DAA.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
    icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
    icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
    icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
    icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
    icacls "C:\CentOS65\CentOS65\Virtual Machines\9EF5529D-3755-40B3-AC6A-325A564D19BB.xml" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
    I am unable to create new VMs as well.
    I have already run
    sfc/ scannow
    DISM
    Already Tried disabling the antivirus
    Upon using wbemtest and connecting to root\virtualization, I am able to click Enum Classes > Recursive
    Kindly suggest how to get HyperV working please. Any help (short of reinstalling /resetting windows) would be much appreciated.
    Warm Regards,
    Dr Vivek Gupta

    Hi,
    The key point would be this:
    The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005).
    Please open MMC, add Component Services snap-in:
    Component Services -> Computers -> My Computer -> DCOM Config -> Windows Management Instrumentation -> Right Click, Properties -> Security “Launch and Activation Permission” -> Edit -> gave Authenticated Users 
    Full Control
    Check the result.
    Alex Zhao
    TechNet Community Support

  • 2.7 GHz Dual CPU PPC G5 Startup Problems

    New, ongoing problems with my Early 2005 G5 (typing this on my old G3):  Boot process suddenly no workee. If I reset the PMU, and then reset PRAM, it will boot normally. But attempt to restart or reboot subsequently will result in (a) black screen, (b) Apple logo but no "rotating gear," or (c) random boot success but a cursor freeze very soon after.  DIY troubleshooting:  1) Running Apple Hardware Test from Mac OS X v 10.4 installation disc indicates a failure of the CPU "B" AD7417, Ref Desig AD1. (Temperature of CPU B displays as -35.7°C using Marcel Bresink's "Hardware Monitor." CPU A indicates an expected temperature of 50°C at idle.) This has been the case since 2010, but computer has always acted normally until about a week ago.  2) Running TechTool Pro v 4.1.3 from second internal HD on primary shows no failures during any test.  3) Running Disk Warrior v 3.0.3 showed no problems.  4) Same startup failures occur when the Tiger installation disc is selected as the startup disc.  5) Once the system fails to boot, attempting startup without resetting PMU (i.e. attempting to reset only the PRAM first) will not produce a second chime, although I get the first chime. PRAM battery (3.6 volt Lithium) measures 3.68 volts out of circuit and is only about 1 year old.  6) Took the G5 to the local Apple Genius bar, where they kept it for about 4 days and reported that the "ASD" (Apple System Diagnostics) procedure recommended to replace the CPU assembly ("or if that didn't work to replace the Logic Board"). I found that "diagnosis" unhelpful and retrieved my G5 from them not repaired ($900+ for CPU assembly or $900+ for Logic Board).  7) When I overhauled the LCS back in October 2009, I had observed thermal grease had leaked through to the PPC970 CPU chips from the heat sink interfaces on both CPU A and B. However the computer had worked fine for the last 3 years with that condition present. As a precaution against possibility that the new start-up problems were being caused by this, I have just pulled the CPU/LCS assembly from the G5, removed both CPUs from the LCS, cleaned and re-greased the PPC970 chips and re-installed the CPU assemblies. There was no change in the boot failure symptoms. There has been no coolant leakage and CPU A temperature looks normal.  Questions:  Could the AD7417 Analog Devices sensor have anything to do with this booting problem? (Can't see how since it didn't do anything before now.) Is it possible the Power Management Unit (Mitsubishi M16C/62F) ROM is at fault? Any guesses as to any particular components or component types that might be bad ( i.e. maybe electrolytic capacitors, etc)?  Thanks for reading!

    Most probably the solder issue happens in the U3 system controller which is situated on the backside of the logic board, with a large heatsink assembly. They should have cooled it better. Even on 2 GHz machines it heated up to 80 C quite easily. There's an IBM document [1] boasting how well they designed the thermal pumping endurance of the CPUs (also BGAs) - I don't know whether they applied that bit of engineering to the U3 controller as well..
    With the older G5 generation as well as the latest one, it's possible to run the machine with only one CPU attached, and see whether it's one the CPUs that's starting to give up. I don't think the 2.7 model will start up like that, unfortunately.
    You could fire up the OF test from the ASD CD and let it run the logic board test (select individual tests) for like 50 runs (loop count) or so and see if it locks up. The problem with the CD is that the fans go full rpm, making the cooling much better than during boot up or in the OS. One of my broken logic boards hung up during the ASD test deterministically and the other only in the OS or during boot up.
    You could also loop the CPU tests from the ASD, but they don't seem to be a stress test, but rather just test computational correctness. Looping them probably won't put much heat load on the CPUs. If you can boot into OS, using some small stress test that fits in the CPU cache (small ffts etc..) could be used to verify the CPUs. The ASD memory test should be ok to test the memory buses, but those also go through the U3 chip.
    [1] https://www-01.ibm.com/chips/techlib/techlib.nsf/techdocs/59BEA03A4FA9E41787256F D600710800/$file/BGA%20Solution%20for%20G5.pdf

  • Windows Update fails on Server 2012 R2 Virtual Machine

    I have set up a virtual network with two virtual machines. The first VM is Server 2008 R2 and is set up as a domain controller. The second VM is Server 2012 R2, and has been joined to the domain.  The DC (TestVM1) is also set up as a DNS server. 
    From TestVM2 (Server 2012 R2), I am able to log in using a domain login, and I am able to browse to a public website.
    I was able to run Windows Updates from TestVM1, but when I attempt to run Windows Updates from TestVM2, it fails.
    The Windows Update client shows "Error(s) found:" and "Code 8024402F". 
    Errors in WindowsUpdate.log include
    2014-10-17 18:26:14:235  800 950 Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
    2014-10-17 18:26:26:238  800 950 Misc WARNING: Send failed with hr = 80072ee7.
    2014-10-17 18:26:26:238  800 950 Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
    2014-10-17 18:26:26:238  800 950 Misc WARNING: Send request failed, hr:0x80072ee7
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://v4.download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab>.
    error 0x8024402c
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x8024402c
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x8024402c
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x8024402c
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CID failed. error 0x80072ef3
    2014-10-17 18:26:26:238  800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Provider for error reporting, hr = 0X80072EF3
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CCC failed. error 0x80072ef3
    2014-10-17 18:26:26:238  800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Country for error reporting, hr = 0X80072EF3
    2014-10-17 18:26:26:238  800 950 PT WARNING: ECP: Failed to download cab file from
    http://download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab with error 0x8024402c
    2014-10-17 18:26:26:238  800 950 PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 34, Old Count = 60
    2014-10-17 18:26:26:317  800 950 PT   + SyncUpdates round trips: 1
    2014-10-17 18:26:26:317  800 950 PT WARNING: Sync of Updates: 0x8024402f
    2014-10-17 18:26:26:317  800 950 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
    2014-10-17 18:26:26:317  800 950 Agent   * WARNING: Failed to synchronize, error = 0x8024402F
    2014-10-17 18:26:26:317  800 950 Agent   * WARNING: Exit code = 0x8024402F
    This is blocking further work.  Assistance would be greatly appreciated.

    I am having the exact same issue. Fresh build of Server 2012 R2 from the Microsoft Volume Licensing ISO. I tried before and after joining to the domain. Same error every time.  Firewall is turned off. No AV. We do have a cloud proxy service, but I bypassed
    that as a test and got the same error message.  I also tried to stop wuauserv and cleaning out the folder and starting it back up.  No joy as well.  This is a VM server running on ESXi 5.1.  Server 2008 servers dont seem to have
    an issue.  Server 2012 server don't seem to have an issue.  Only this new Server 2012 R2 server.  My logs are below:
    2014-10-28 14:28:46:104  696 4a4 AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-10-28 14:28:46:104  696 4a4 WuTask Uninit WU Task Manager
    2014-10-28 14:28:46:198  696 4a4 Service *********
    2014-10-28 14:28:46:198  696 4a4 Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2014-10-28 14:28:46:198  696 4a4 Service *************
    2014-10-28 14:29:24:198  696 5c8 Misc ===========  Logging initialized (build: 7.9.9600.17092, tz: -0400)  ===========
    2014-10-28 14:29:24:198  696 5c8 Misc   = Process: C:\Windows\system32\svchost.exe
    2014-10-28 14:29:24:198  696 5c8 Misc   = Module: c:\windows\system32\wuaueng.dll
    2014-10-28 14:29:24:198  696 5c8 Service *************
    2014-10-28 14:29:24:198  696 5c8 Service ** START **  Service: Service startup
    2014-10-28 14:29:24:198  696 5c8 Service *********
    2014-10-28 14:29:24:214  696 5c8 Agent   * WU client version 7.9.9600.17092
    2014-10-28 14:29:24:214  696 5c8 Agent   * Base directory: C:\Windows\SoftwareDistribution
    2014-10-28 14:29:24:214  696 5c8 Agent   * Access type: No proxy
    2014-10-28 14:29:24:214  696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    2014-10-28 14:29:24:214  696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-10-28 14:29:24:214  696 5c8 Agent   * Network state: Connected
    2014-10-28 14:29:24:214  696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    2014-10-28 14:29:24:214  696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-10-28 14:29:24:510  696 5c8 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
    2014-10-28 14:29:24:510  696 5c8 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2014-10-28 14:29:24:542  696 5c8 DtaStor Data store successfully created
    2014-10-28 14:29:24:542  696 5c8 Agent ***********  Agent: Initializing global settings cache  ***********
    2014-10-28 14:29:24:542  696 5c8 Agent   * Endpoint Provider: 00000000-0000-0000-0000-000000000000
    2014-10-28 14:29:24:542  696 5c8 Agent   * WSUS server: <NULL>
    2014-10-28 14:29:24:542  696 5c8 Agent   * WSUS status server: <NULL>
    2014-10-28 14:29:24:542  696 5c8 Agent   * Target group: (Unassigned Computers)
    2014-10-28 14:29:24:542  696 5c8 Agent   * Windows Update access disabled: No
    2014-10-28 14:29:24:542  696 5c8 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
    2014-10-28 14:29:24:542  696 5c8 WuTask WuTaskManager delay initialize completed successfully..
    2014-10-28 14:29:24:542  696 5c8 Report WARNING: Failed to initialize event uploader for new server {9482F4B4-E343-43B6-B170-9A65BC822C77} with hr = 8024043d.
    2014-10-28 14:29:24:542  696 5c8 Report CWERReporter::Init succeeded
    2014-10-28 14:29:24:542  696 5c8 Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2014-10-28 14:29:24:542  696 5c8 DnldMgr Download manager restoring 0 downloads
    2014-10-28 14:29:24:557  696 5c8 AU ###########  AU: Initializing Automatic Updates  ###########
    2014-10-28 14:29:24:557  696 5c8 AU AIR Mode is disabled
    2014-10-28 14:29:24:557  696 5c8 AU   # AU disabled through User preference
    2014-10-28 14:29:24:557  696 5c8 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
    2014-10-28 14:29:24:557  696 5c8 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
    2014-10-28 14:29:24:557  696 5c8 AU AU finished delayed initialization
    2014-10-28 14:29:24:557  696 234 DnldMgr Asking handlers to reconcile their sandboxes
    2014-10-28 14:29:35:776  696 578 IdleTmr Incremented idle timer priority operation counter to 1
    2014-10-28 14:29:37:307  696 52c AU Triggering AU detection through DetectNow API
    2014-10-28 14:29:37:307  696 52c AU Triggering Online detection (interactive)
    2014-10-28 14:29:37:323  696 5c8 AU #############
    2014-10-28 14:29:37:323  696 5c8 AU ## START ##  AU: Search for updates
    2014-10-28 14:29:37:323  696 5c8 AU #########
    2014-10-28 14:29:37:323  696 5c8 SLS Retrieving SLS response from server...
    2014-10-28 14:29:37:323  696 5c8 SLS Making request with URL
    HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: Proxy List used: <172.25.7.9:80> Bypass List used : <(null)> Auth Schemes used : <None>
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: Send request failed, hr:0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092>.
    error 0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 SLS FATAL: SLS:CSLSDownloader::GetUrlContent: DoFileDownload failed with 0x80072ee2.
    2014-10-28 14:29:58:339  696 5c8 SLS FATAL: GetResponse failed with hresult 0x80072ee2...
    2014-10-28 14:29:58:339  696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
    2014-10-28 14:29:58:339  696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
    2014-10-28 14:29:58:339  696 5c8 EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
    2014-10-28 14:29:58:339  696 5c8 Agent WARNING: Failed to obtain the authorization cab URL for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0
    2014-10-28 14:29:58:339  696 5c8 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80072EE2
    2014-10-28 14:29:58:339  696 5c8 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 7; does use network; is not at background priority
    2014-10-28 14:29:58:339  696 5c8 IdleTmr Incremented PDC RefCount for Network to 1
    2014-10-28 14:29:58:339  696 5c8 IdleTmr Incremented idle timer priority operation counter to 2
    2014-10-28 14:29:58:385  696 5c8 Report ***********  Report: Initializing static reporting data  ***********
    2014-10-28 14:29:58:385  696 5c8 Report   * OS Version = 6.3.9600.0.0.196880
    2014-10-28 14:29:58:385  696 5c8 Report   * OS Product Type = 0x00000007
    2014-10-28 14:29:58:401  696 5c8 Report   * Computer Brand = VMware, Inc.
    2014-10-28 14:29:58:401  696 5c8 Report   * Computer Model = VMware Virtual Platform
    2014-10-28 14:29:58:401  696 5c8 Report   * Platform Role = 1
    2014-10-28 14:29:58:401  696 5c8 Report   * AlwaysOn/AlwaysConnected (AOAC) = 0
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Revision = 6.00
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Name = PhoenixBIOS 4.0 Release 6.0    
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Release Date = 2013-08-16T00:00:00
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Sku Number unavailable.
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Vendor = Phoenix Technologies LTD
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Family unavailable.
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Major Release = 4
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Minor Release = 6
    2014-10-28 14:29:58:401  696 5c8 Report   * Locale ID = 1033
    2014-10-28 14:29:58:401  696 5c8 Agent *** START ***  Queueing Finding updates [CallerId = AutomaticUpdatesWuApp  Id = 1]
    2014-10-28 14:29:58:401  696 5c8 AU <<## SUBMITTED ## AU: Search for updates  [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
    2014-10-28 14:29:58:432  696 b0c Agent ***  END  ***  Queueing Finding updates [CallerId = AutomaticUpdatesWuApp  Id = 1]
    2014-10-28 14:29:58:432  696 b0c Agent *************
    2014-10-28 14:29:58:432  696 b0c Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdatesWuApp  Id = 1]
    2014-10-28 14:29:58:432  696 b0c Agent *********
    2014-10-28 14:29:58:432  696 b0c Agent   * Online = Yes; Ignore download priority = No
    2014-10-28 14:29:58:432  696 b0c Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
    or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-10-28 14:29:58:432  696 b0c Agent   * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
    2014-10-28 14:29:58:432  696 b0c Agent   * Search Scope = {Machine & All Users}
    2014-10-28 14:29:58:432  696 b0c Agent   * Caller SID for Applicability: S-1-5-21-600452275-980750782-2124898778-9669
    2014-10-28 14:29:58:432  696 b0c SLS Retrieving SLS response from server...
    2014-10-28 14:29:58:432  696 b0c SLS Making request with URL
    HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
    2014-10-28 14:29:59:135  696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\sls.cab with dwProvFlags 0x00000080:
    2014-10-28 14:29:59:135  696 b0c Misc  Microsoft signed: NA
    2014-10-28 14:29:59:135  696 b0c Misc  Infrastructure signed: Yes
    2014-10-28 14:29:59:135  696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP3958.tmp with dwProvFlags 0x00000080:
    2014-10-28 14:29:59:135  696 b0c Misc  Microsoft signed: NA
    2014-10-28 14:29:59:135  696 b0c Misc  Infrastructure signed: Yes
    2014-10-28 14:29:59:135  696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
    2014-10-28 14:29:59:135  696 b0c SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
    2014-10-28 14:29:59:135  696 b0c Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
    2014-10-28 14:29:59:135  696 b0c Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
    2014-10-28 14:29:59:135  696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
    2014-10-28 14:29:59:135  696 b0c Setup Checking for agent SelfUpdate
    2014-10-28 14:29:59:135  696 b0c Setup Client version: Core: 7.9.9600.17092  Aux: 7.9.9600.17031
    2014-10-28 14:29:59:135  696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "https://fe2.update.microsoft.com/v10/3/windowsupdate/selfupdate"
    2014-10-28 14:30:00:151  696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
    2014-10-28 14:30:00:151  696 b0c Misc  Microsoft signed: NA
    2014-10-28 14:30:00:151  696 b0c Misc  Infrastructure signed: Yes
    2014-10-28 14:30:00:151  696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP3D51.tmp with dwProvFlags 0x00000080:
    2014-10-28 14:30:00:167  696 b0c Misc  Microsoft signed: NA
    2014-10-28 14:30:00:167  696 b0c Misc  Infrastructure signed: Yes
    2014-10-28 14:30:00:167  696 b0c Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
    2014-10-28 14:30:00:167  696 b0c Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
    2014-10-28 14:30:00:167  696 b0c Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2014-10-28 14:30:00:323  696 b0c PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2014-10-28 14:30:00:323  696 b0c PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
    https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
    2014-10-28 14:30:01:104  696 b0c PT WARNING: Cached cookie has expired or new PID is available
    2014-10-28 14:30:01:104  696 b0c PT WARNING: PTWarn: Anonymous plug-in skipped for WU
    2014-10-28 14:30:01:198  696 b0c Agent Reading cached app categories using lifetime 604800 seconds
    2014-10-28 14:30:01:198  696 b0c Agent Read 1 cached app categories
    2014-10-28 14:30:40:917  696 b0c PT WARNING: ECP: Failed to validate cab file digest downloaded from
    http://download.windowsupdate.com/d/msdownload/update/others/2013/09/9242543_a77d372b9c8b13c599a3daf4b321ea1903da9a72.cab with error 0x80091007
    2014-10-28 14:30:40:917  696 b0c PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 57, Old Count = 60
    2014-10-28 14:30:41:151  696 b0c PT   + SyncUpdates round trips: 14
    2014-10-28 14:30:41:151  696 b0c PT WARNING: Sync of Updates: 0x8024402f
    2014-10-28 14:30:41:151  696 b0c PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
    2014-10-28 14:30:41:151  696 b0c Agent   * WARNING: Failed to synchronize, error = 0x8024402F
    2014-10-28 14:30:41:151  696 b0c Agent   * WARNING: Exit code = 0x8024402F
    2014-10-28 14:30:41:151  696 b0c Agent *********
    2014-10-28 14:30:41:151  696 b0c Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdatesWuApp  Id = 1]
    2014-10-28 14:30:41:151  696 b0c Agent *************
    2014-10-28 14:30:41:151  696 b0c Agent WARNING: WU client failed Searching for update with error 0x8024402f
    2014-10-28 14:30:41:151  696 b0c IdleTmr WU operation (CSearchCall::Init ID 1, operation # 7) stopped; does use network; is not at background priority
    2014-10-28 14:30:41:151  696 b0c IdleTmr Decremented PDC RefCount for Network to 0
    2014-10-28 14:30:41:151  696 b0c IdleTmr Decremented idle timer priority operation counter to 1
    2014-10-28 14:30:41:151  696 6fc AU >>##  RESUMED  ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
    2014-10-28 14:30:41:151  696 6fc AU   # WARNING: Search callback failed, result = 0x8024402F
    2014-10-28 14:30:41:151  696 6fc AU #########
    2014-10-28 14:30:41:151  696 6fc AU ##  END  ##  AU: Search for updates  [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
    2014-10-28 14:30:41:151  696 6fc AU #############
    2014-10-28 14:30:41:151  696 6fc AU All AU searches complete.
    2014-10-28 14:30:41:151  696 6fc AU   # WARNING: Failed to find updates with error code 8024402f
    Derek
    Systems Engineer
    Derek Desktop Engineer

  • Message "Failed to create Java Virtual Machine" after starting Design Studio 1.2 SP1

    Hi experts,
    after I installed the SP1 of Design Studio 1.2 I become the Message "Failed to create java virtual machine" and I´m not able to start the Design Studio.
    My java version is 1.7
    My SapDesignStudio.ini File (C:\Program Files\SAP BusinessObjects\Design Studio) looks like as follow:
    -startup
    plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
    --launcher.library
    plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.1.200.v20130521-0416
    -name
    SAP
    BusinessObjects
    Design
    Studio
    -vmargs
    -Xmx1024m
    -Xms256m
    -XX:PermSize=32m
    -XX:MaxPermSize=512m
    -XX:+HeapDumpOnOutOfMemoryError
    -Dfile.encoding=UTF-8
    -Dosgi.requiredJavaVersion=1.6
    -Djava.net.preferIPv4Stack=true
    -Djdk.xml.entityExpansionLimit=0
    -Djavax.net.ssl.trustStoreProvider=SunMSCAPI
    -Djavax.net.ssl.trustStoreType=Windows-ROOT
    -Dorg.osgi.framework.os.name=win32
    Any ideas or experiences?
    Many thanks and regards,
    Michael

    Hello Max,
    many thanks for your reply and your in my case absolutely correct answer!
    In respect to your solution proposal I have renamed my Analysis-workspace folder to "Analysis-workspace-V0"
    After I have started the Design Studio 1.2 SP1 a new Analysis workspace folder was created with the typical standard name "Analysis-workspace"
    So I have my old Design Studio Application and an new empty Analysis folder.
    By the way, in my case in addition to the folder rename it was necessary to change the -Xmx Value (SapDesignStudio.ini File) a little bit lower as in standard (in the DS1.2 SP1 setting) 1024m. To become not the Message "Failed to create Java Virtual Machine" I have changed the -Xmx Value from 1024m to 512m.
    Now I´m able to start the Design Studio 1.2 SP1 as expected without Message and without breaks down after 5-6 seconds during the startup.
    Thanks again!
    Best regards,
    Michael

  • Virtual Machine Export Failed

    I am requesting help with a continuing problem I am having attempting to export a Hyper-V Virtual Machine to a shared drive internally installed on a Domain Server.
    When I attempt the export, a few second later I received the following error message: “An error occurred while attempting to export the virtual machine. Failed to copy file during export. General access denied error
    (0x80070005).”
    I have spent numerous hours searching Blog Posts and Online forums for a definitive solution to this problem. The purposed online solutions that I have come across refer to
    NTFS level permissions & share level permissions set at the drive share for the Hyper-V Computer account, the User account used, and System account. None have worked for me. Here is an example of such a post finding:
    https://support.microsoft.com/en-us/kb/2008849.
    I also tried the settings from a purposed solution for Hyper-V – General Access Denied Error message listed in this post here:
    http://blog.mpecsinc.ca/2009/02/hyper-v-general-access-denied-error-for.html. No luck here also.
    I have a small Microsoft 2008 R2 SP1 Server network that consists of 2 Domain Controllers, (one which serve as a Hyper-V Host). 4 virtual machines and a combination of wireless and PC based Windows 7 and Windows 8.1
    clients.
    The 1TB drive I’m attempting to move my virtual machines to is brand new, purchased five days ago. I reformatted this drive a couple times to see if that had any affect, none at all.
    So, I’m reaching out for any other suggestions that I might try. Please, remember I have already tried and have in place the NTFS level permissions & share level permissions set at the drive share for the Hyper-V
    Computer account, the User account used, and System account.
    Your help with this problem will be very much appreciated.
    Thank you,
    Martiar

    Also, you must export to a UNC path, not a mapped drive.  And your Hyper-V Server must be a member of the domain (as that is what requires the read, write, and create permissions on the share), your user account needs to only read the path.
    Also, the permissions must be right at both the share and NTFS levels.
    Personally, why not add the drive to a Hyper-V Server and export locally?  If you are trying to set up and SMB share for running VMs you have to use Hyper-V 2012 R2 and your File Server must be 2012 R2 as well.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • Problems PXE booting Gen 2 Virtual Machines after Upgrading to Windows Server 2012 R2

    My Current Setup: 
    I have two virtual machines set up with Hyper V on my Windows Server 2012 Server.
    VM1: Configured to boot from an ISO file and runs Clonezilla server. 
    VM2: Configured to PXE boot using a legacy network adapter, and with a passthrough 250Gb hard disk. 
    These two VMs are connected to an external Virtual Switch, which allows physical machines to PXE boot to the Clonezilla server. 
    For the past few months I have been using this setup for two purposes:
    1. To clone physical machines to the Clonezilla virtual server (as a backup).
    2. To restore those image to the second VM if I find that need to get access to the files on the original image.. 
    This has worked perfectly, except for the fact that the speed of the legacy network adapter on the second VM (which is required to PXE boot) is very slow. But I know this is because of the limitations in how the legacy adapter works... 
    Now my problem:
    I found out that Gen 2 VMs allow you to PXE boot without having use a legacy network adapter, allowing me to image back to the VM faster. So I upgraded the Server to Server 2012 R2 . I then created the same two virtual machines on the R2 server. I can still
    PXE boot the Gen 1 VM to the Clonezilla Server but I cannot get the Gen 2 VMs to PXE boot properly. They get an IP address from the Clonezilla Server but then just stop with the following screen. (note: I have disabled the Secure Boot). 
    Are Gen 2 VMs unable to pull down images from anything other than a WDS Server? 

    Hi J,
    >>Unfortunately WDS is not a solution for us as it is dependent on the PC being part of a domain
    If you would like to make the client not join to the domain, please check the box before “Do not join the client to a domain after an installation.”  In addition, make sure not to set the client to the domain in the unattend file and do not prestage
    the computer in AD. "
    It is quoted from following thread :
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/1026c3a9-0a10-4a58-a48f-5391659a96c8/wds-set-unattend-file-for-workgroup?forum=winserversetup
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • How to set up time capsule with ethernet?

    How do I set up a Time Capsule using just ethernet? I have to do a complete backup (1 TB) (AGAIN!) and it will take forever using WIFI. And the instruction manual even says that the first complete backup should be done using just ethernet, --but you

  • Error when connect proxy user

    i using ODP.NET connect to oracle database with proxy user, when i connect with a password not correct then i can't again connect with password correct after. string[] cs = new string[2]; cs[0] = "Data Source=orcl;User Id=user1;Password=pass1;"+ "Pro

  • ITunes cannot open apple iphone 4 device

    Recently i have been trying to sync my iTunes and put new music and other stuff, but a small box appears and says "The iPhone cannot be used because the Apple Mobile device service is not started". I try to restart my laptop and iPhone 4 but it has b

  • Possible to not use DISTINCT keyword in select query?

    I have a high repetition query that polls the database and only ever uses the first row returned from the query. Using the distinct keyword adds overhead and increases the use of tempdb in SQL Server in order to remove any duplicates. Is there a way

  • Negative Sales & Payment Terms

    Does anyone know of a way to enter negative sales and/or payment terms into SAP? We have the following terms of sale: Due 5 days before delivery date. Due 10 days before vessel arrival date. etc. does anyone have any idea how to enter terms like this