Virtual Wireless Lan Controller moved, licence now missing.

Our Cisco WLC version 7.4.100.0 was been moved to new ESXi servers (New hardware) as a result of this I guess the UUID has changed and voided the installed licence.
I've tried to reinstall the original licences but this fail's because of a UDI mismatch.
If I try to do a rehost the first step fail's with
Local file /tmp/license.upd not found!
Can anyone point me in the right direction to recover and reinstall our licences.

Thanks for your replies, the issue is that the guy who set this up also setup his own login Cisco account (rather than use our ScSITServices shared account) where the WLAN licences are located. He has since left and I'm trying without success at the moment to get Cisco support to change the password to allow me access to retrieve the licence.

Similar Messages

  • Error when installing webauth certificate virtual wireless LAN controller

    Hi there
    I am having issues installing web auth certificate for our virtual wirelesss LAN controller. 
    I am issuing a certificate from our own PKI in following format
    device cert for WLC > Intermediate > our root cert. 
    I have followed the discussion here
    https://supportforums.cisco.com/discussion/10890871/generating-csr-wlc-5508
    and the document here 
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html#support
    However I am still getting the following errors 
    *sshpmLscTask: Jun 30 17:18:26.443: sshpmLscTask: LSC Task received a message 4 
    *TransferTask: Jun 30 17:18:28.785: Memory overcommit policy changed from 0 to 1
    *TransferTask: Jun 30 17:18:28.785: RESULT_STRING: FTP Webauth cert transfer starting.
    *TransferTask: Jun 30 17:18:28.785: RESULT_CODE:1
    FTP Webauth cert transfer starting.
    *TransferTask: Jun 30 17:18:33.154: ftp operation returns 0
    *TransferTask: Jun 30 17:18:33.154: RESULT_STRING: FTP receive complete... Installing Certificate.
    FTP receive complete... Installing Certificate.
    *TransferTask: Jun 30 17:18:33.154: RESULT_CODE:13
    *TransferTask: Jun 30 17:18:37.159: Adding cert (8217 bytes) with certificate key password.
    *TransferTask: Jun 30 17:18:37.169: sshpmCheckWebauthCert: Verification return code: 1
    *TransferTask: Jun 30 17:18:37.169: Verification result text: ok
    *TransferTask: Jun 30 17:18:37.171: sshpmAddWebauthCert: Extracting private key from webauth cert and using bundled pkcs12 password.
    *TransferTask: Jun 30 17:18:37.361: sshpmDecodePrivateKey: calling ssh_skb_decode()...
    *TransferTask: Jun 30 17:18:37.493: sshpmDecodePrivateKey: SshPrivateKeyPtr after skb_decode: 0x2aaaacb51628
    *TransferTask: Jun 30 17:18:37.493: sshpmAddWebauthCert: got private key; extracting certificate...
    *TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: extracted binary cert; doing x509 decode
    *TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: doing x509 decode for 1594 byte certificate...
    *TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: failed to validate certificate...
    *TransferTask: Jun 30 17:18:37.494: RESULT_STRING: Error installing certificate.
    *TransferTask: Jun 30 17:18:37.495: RESULT_CODE:12
    *TransferTask: Jun 30 17:18:37.495: Memory overcommit policy restored from 1 to 0
    Error installing certificate.
    Any help is much appreciated

    Similar issue:
    https://supportforums.cisco.com/discussion/11043836/wism-42112-and-web-auth-certificate

  • Virtual Wireless LAN Controller and 1602E: No SSID

    Hello, I am trying to troubleshoot a customer's issue remotely. 
    They have vWLC 7.4, and a 1602E AP, running the 7.4 LWAPP image, successfully joined.
    Whatever is tried, the SSID configuration is not pushed to the AP.  Other configuration changes get reflected to the AP such as enabling/disabling ssh.
    The goal is for multiple SSIDs connected to various VLANs to be setup, but I have simplified things for now.
    So there is an AP group containing this one AP, and a single WPA2-PSK WLAN.  The WLAN is bound to the management interface.
    The SSID configuration does not get pushed out to the AP.
    Any ideas what I should do to troubleshoot this?  I can't see any obvious issues in the error logs.
    Thanks...

    Keep in ming that the vWLC only supports FlexConnect mode AP's not local mode.  Is the mode of the AP in local or FlexConnect?
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Ise 1.1.1 missing Wireless LAN Controller (WLC) in Auth Profile

    Anyone else not seeing the Wireless LAN Controller tick box in Authorization Profile?
    Clean install of 1.1.1. with ISE Version 1.1.1.268—Cumulative Patch 1 applied
    EVAL license
    All the documentation says it should still be there in 1.1.1 unless im missing a trick?

    If you are referring to the ACL for the wireless lan controller that has change to the "Airespace ACL Name".
    This looks like a documentation bug.
    Tarik Admani
    *Please rate helpful posts*

  • Cisco Wireless Control System need wireless Lan Controller ?

    Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

    Hi Joao,
    The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
    The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
    From this doc;
    http://www.cisco.com/en/US/products/ps6305/index.html
    Overview of WCS
    The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
    WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
    The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
    WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
    From this good doc;
    http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
    Detect and Locate Rogue Access Points
    From this WCS doc;
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
    Rogue Detection under Unified Wireless Networks
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
    Hope this helps!
    Rob

  • 4404 wireless lan controller managment via wireless clients

    I am having an issue managing a 4404 wireless lan controller via wireless clients.
    I have checked the box "enable controller management to be accessible from wireless clients" under management. For some reason that does not seem to fix the problem (page cannot be displayed). I cannot ping the controller by IP but other devices on the same subnet respond. Everything else works fine.
    I CAN manage the controller when plugged in a wired connection.
    When I do a route print it is identical wireless or wired. The route simple points to my interface. If I modify the route on my computer to actually point to our gateway instead of the interface then everything works. But why should I have to do this only for my wireless connection and not my wired to manage this box?

    Thanks for the info. I narrowed the problem down to an ARP issue.
    In order for me to connect to the controller, I run a batch file that creates a static ARP entry on my laptop. I don't have to do this for any other device except the controller. Not sure what the underlying cause is, but that works as a workaround right now.

  • Wireless Lan Controller Issue

    Hi All,
    We have a Wireless Lan Controller 4402 with software version 4.0.155.5. On Friday we experience a problem where our clients wouldn't get redirected to the internal webpage for authentication. It would just come up with page not found. We know the page was working fine becasue we could manually type in the
    https://1.1.1.1/login.html and the
    page would come up and you could login successfully. The users who were already connected to the controller were not affected and continued to operate. We have 2 other WLC's at the same software revision and they were not affected so I don't think it has anything to to with software level. Its like the webserver in the wlc failed to work. We failed over the AP's to the 3rd WLC and rebooted WLC1. After the WLC1 restarted we failed one of the previous non-working AP's back to it and it works again.
    I know "now" there is debug commands to run at the time when the WLC wasn't working, but unfortunately I didn't know at the time. The WLC is running again fine and I was wondering if anybody has seen this issue before.
    Any ideas on a fix or reason would be greatly appreciated.
    Thanks,

    We are running WiSM 4.1.185.0 and we just had the similar problem with one controller. The other three controllers were fine when it happened. The exactly issue was the nslookup failed(timed out) from the client, so the web login page won't show when people lunch the browser. A reboot of the controller fixed the problem. We have been running Cisco LWAPP for more than a year (from 4.0.155.5 to 4.1.185.0) and it is the first time we see this problem. TAC is still investigating the cause.
    Zhenning

  • Security policy signature in Wireless Lan Controller?

    Can we update security police signature in wireless lan controller ?

    I made this solution andthe problem still exist. and restart the VMware and also the problem still exist
    Go to Configure> Controllers
    and then which controller have config mismatch...on right side click on mismatch in Audit status tab.
    After that it will ask for audit now, click on that. After auditing it will show you the two option:
    1. Restore PI values to Controller
    2. Refresh config from controler
    Clcik on 2nd #Refresh config from controler#
    Then select 2nd option again(Use the configuration on the controller currently) and click on GO.
    Please feed me back.

  • Can cisco CAP2702i connect to Cisco3850 switch with wireless LAN controller license via another switch ?

    If i connect cisco AP - CAP2702i to another switch, and use trunk port between Cisco3850 and the other switch , can the AP able to register with Cisco3850 with wireless LAN controller  ?   or the AP has to directly connect to Cisco3850 in order to register?

    The AP and 3850 wireless management are in same Vlan( vlan202). The AP is new unit and did not join MC before. 
    What i did on 3850 :
    input command - wireless management interface vlan 202
                              - ap cdp
                              - wireless mobility controller
    Is there any config i miss out on 3850 and any config need to be set on AP ?
    From Ap console output show me "could not discover WLC using dhcp ip". Is it due to AP dont have IP address? If AP register with WLC through layer 2 , i believe there is no related with IP.Correct me if i'm wrong.
    Due to the 3850 is not a POE, the AP unable directly connect to 3850  . I guess have to use power adapter to power on the AP.

  • MARS/Wireless LAN Controller

    I see 5.3 for MARS now supports Wireless Lan Controller integration, but 4.3 does not. We use a MARS 20 so 5.3 isn't an option. Anyone heard any news on a future 4.x release getting WLC integration as well?

    There's supposed to be a code merge in 2008. I'm not holding my breathe, but I've been told that many times and if true it leads me to believe that eventually the gen 1 will also support the wireless lan controller. Cisco has never specifically told me that though.

  • Warning page on Cisco Wireless Lan Controller for guest access

    Hi,
    We have an Cisco wireless LAN controller 4400 in our organization, and lots of guest using our Wi-Fi network.
    I would like to configure a warning and terms and condition page when guest using first time our network.
    Can you please let me know is that possible without adding external web server and how to configure.
    Many Thanks in Advance
    Amit Sharma

    Hi Amit,
    Hope you are doing great!!
    the below link will help you in getting the issue resolved!!
    http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00809bdb5f.shtml
    Please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • Issues after changing the AP Name on Wireless LAN Controller

    I recently changed the AP Name of all the Wireless Access Points in my branch office (which are all associated to the branch office Wireless LAN Controller(s)). After that I noticed that all branch office employees are unable to connect to the employee SSID. The employee SSID uses web authentication and employees are authenticated using Head Office AD via Cisco ACS, both located at the Head Office.
    There are other SSID's on the WLC which all work fine, but only employee SSID which uses AD authentication does not work. AD authenticaion is working fine because employee's in HO are successfully able to connect to the employee SSID at HO.
    The branch office is connected to the HO via a tunnel link. We noticed that if we restart both the ASA at either ends of the tunnel. The employee SSID starts working again but only temporarily for a day or so... what could be the issue? Can renaming the AP's cause issues? How can I fix this problem?
    Thanks in advance

    Thanks Elliott,
            I did the debug like you said and I am getting the following debug messages:
    *apfMsConnTask_0: Jun 20 08:18:14.580: Deleting the client immediatly since WLAN is changed
    and also
    *apfReceiveTask: Jun 20 05:25:11.857: 00:1f:3c:86:af:15 Orphan Packet from 192.168.52.34
    The logging on the WLC shows
    *apfReceiveTask: Jun 18 17:56:41.788: %MM-1-ANCHOR_UNAVAILABLE: mm_mobile.c:2155
    All export anchors are down. Cannot anchor the client.00:c0:a8:f3:cd:ae
    The DHCP pool for the employee users are configured on a guest WLC which sits behind an ASA

  • Is it possible run a Wireless LAN controller without a WCS?

    is it possible run a Wireless LAN controller without a WCS?
    How Can I configure the Wireless Lan controller?
    Thanks

    Hi Alfred,
    The WLC can be completly configured and operated without the WCS. The WCS is a nice addition for the management especially when running multiple WLC's but is not required.
    Info on WLC (with Video);
    http://www.cisco.com/en/US/products/ps6366/index.html
    Info on the WCS;
    http://www.cisco.com/en/US/products/ps6305/index.html
    Hope this helps!
    Rob

  • How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

    I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC  and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
    Best Regards,
    Alan

    Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings.  The WLC2106 is a traditional Cisco product.  You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
    Best Regards,
    Glenn

  • Cisco Wireless LAN Controller Always disconnect

    Dear All,
    Please help to assist my issue.I used Cisco Wireless LAN Controller model: 5508 with version 7.0.98.0 and I got issue with connection always disconnect ping always loss or some time client can't get DHCP from Controller. 
    - I configure as Internal DHCP Server with 1 SSID.
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html
    - DHCP least is not full and I also try to clear-lease all but still not work.

    1. Config dhcp proxy enable
    2. In case of internal Dhcp, try debug for clients
     using,
    debug client <MAC ADDRESS OF CLIENT>

Maybe you are looking for

  • Scrollfunction from the touchpad on a Satellite A100-812 does not work

    The scrollfunction of the touchpad (A100-812) does not work anymore. Device should work perfectly says hardware check.

  • Invoice numbers are missing

    Hello friends while creating invoice the numbers are missing, for example we assign number range between 1 to 100 for a perticular invoice, once the invoice is created the system should take invoice number between 1 to 100 in a sequential manner ,  i

  • Access Violation within a Single Role Report displays duplicate data

    The output of the 'Access Violation within a Single Role' report under Incident Reports in GRC includes some rows which repeat with identical data. I created a test responsibility with conflicting controls in Oracle r12 instance to find out whether i

  • "effects" to work??

    Anyone know how to get "effects" to work in Live Type 1.2.1 I have installed and reinstalled (2 times) LiveType and it still freezes when I click on "apply" while I am in the effects browser. I dont think this is isolated because the more I read I re

  • Sync iPod with a specific folder

    I'm wondering is there any practical method in order to create a folder somewhere and sync iPod shuffle with that specific folder? Actually I create a folder called My.iPod and add it to my Send To context menu: Now I want to add my optimal musics to