Virtualization of Windows Partition on Triple Boot System

I have recently triple booted my Macbook using the following partitioning tables:
(hd0,0) /dev/sda1 - EFI
(hd0,1) /dev/sda2 - Storage (FAT32)
(hd0,2) /dev/sda3 - Ubuntu Linux (ext3) <- GRUB
(hd0,3) /dev/sda4 - Windows XP (FAT32)
(hd0,4) /dev/sda5 - Mac OS X (Mac OS Extended)
I used the Bootcamp drivers to get Windows XP working correctly, but I had to use rEFIt as my gui bootloader.
My desire is to also be able to virtualize my Windows XP of the /dev/sda4 partition inside Mac OS X using either VMware Fusion or Parallels Desktop. I have tried the trial versions of both and both don't appear to handle my partitioning scheme very well. Parallels returns an error stating that I have a non-standard Bootcamp partition (due to "multiple" Bootcamp partitions; probably from my FAT32 storage partition). VMware Fusion just attempts to boot the storage partition and it returns the obvious error of "No Operating System".
Is there any work around to this? I would think that it should be an option to create a virtual machine from whichever partition you have an OS installed in, but that doesn't appear to be the case...
Thanks in advance!

The boot selector built into the Intel MacBooks will only show one non-Mac partition per drive and it will always be labelled "Windows". There is a utility called Refit ( http://refit.sourceforge.net/ ) which replaces the Apple-provided boot selector with one which is capable of triple-booting. It doesn't remove or overwrite Apple's boot selector, so you can always go back to the original if need-be.
I believe you may also be able to dual-boot Linux and Mac OS... then use a boot selector under Linux (such as GRUB) to pick between Linux and Windows.

Similar Messages

  • Mac Pro - Using 3 drives for a triple-boot system

    Hello
    I am purchasing an 8-core Mac Pro today, and I want to start the ball rolling early on this endeavor, as it will probably take some discussion and research on my part.
    I want to take my Mac Pro and install 2 more hard drives (for a total of 3) so that I can have a triple-boot system using OS X, Windows XP Pro, and Ubuntu Linux.
    All of the tutorials I am coming across discuss installing on partitions. I'd like to install onto separate hard drives. What do I have to know in order to make this work?
    - Should I use a 64-bit XP OS? Why or why not? (I'll have 4 GB of RAM)
    - Any major issues with drivers in XP or Linux?
    - Can I make a fourth hard drive mountable across all 3 other OS installations?
    - Can I mount the other OS drives in my booted os? (For instance, if I boot into Linux, can I mount the XP drive and the OS X drive, or mount the Linux Drive and XP drive in OS X?)
    Thanks for your input.
    ----------S

    I'd like to install onto separate hard drives. What do I have to know in order to make this work?
    The Boot Camp Assistant will allow you to prepare an entire drive for Windows so that's simple enough. If you want to do this yourself all you need to do is to change the partition map scheme for the desired drive to Master Boot Record and then let the Windows installer do the rest. Be aware that manually doing this will mean that Parallels will not find this drive as a Boot Camp drive if that's important to you.
    Sorry, don't know anything about Linux.
    Should I use a 64-bit XP OS? Why or why not? (I'll have 4 GB of RAM)
    You can. Although there is currently no Apple driver support for x64 versions so you'll be on your won to source drivers. Personally I'd stick to the 32-bit version for now until Apple pulls its finger out and get 64-bit driver support.
    Can I make a fourth hard drive mountable across all 3 other OS installations?
    The simplest solution would be the use of FAT32 however Microsoft limits this to 32GB which is a right pain. You could always install a product like MacDrive into Windows to allow you access to your Mac partitions.
    Can I mount the other OS drives in my booted os?
    It depends on what you're looking for. NTFS partitions are mountable under Mac OS X but are read-only. Mac partitions are avaialable under Windows but requires a product like MacDrive.

  • Triple Boot System

    Hi. I was thinking of getting a new MacBook. However, I also like Windows (XP) and Ubuntu. would it be possible to install them both using BootCamp and have a triple boot system. That is to say, that at the OS selection screen when you hold control or whatever to select your OS, that there will be Windows, OSX, and Ubuntu available. I am to understand that there is a a specail installation for Ubuntu and that it can't be installed via BootCamp just straight-forward. But I just wanted to know if it's possible.

    The boot selector built into the Intel MacBooks will only show one non-Mac partition per drive and it will always be labelled "Windows". There is a utility called Refit ( http://refit.sourceforge.net/ ) which replaces the Apple-provided boot selector with one which is capable of triple-booting. It doesn't remove or overwrite Apple's boot selector, so you can always go back to the original if need-be.
    I believe you may also be able to dual-boot Linux and Mac OS... then use a boot selector under Linux (such as GRUB) to pick between Linux and Windows.

  • Server Virtualization with Windows Server Hyper-v and System Center Expiration

    Prometric says: STATUS: Passed, EXPIRATION: 22-03-2015.
    Does this means that I have to take the exam again before 22-03-2015?

    Hi, Daniel.
    Let me understand this exactly.
    You log into http://register.prometric.com/ and then on the left side, you click
    Candidate History to see your list of exam attempts.
    Under the Status Expiration column, all the way to the right, it should read
    Passed and the date/time you passed it. Are you sure it reads
    2015 and not
    2014? Is there also
    another date on that same row/column for this exam's expiration below the date you passed it?
    On the Prometric site, this column is supposed to display the date you passed it and optionally the date it expires for many non-Microsoft exams.
    Typically for Microsoft exams, this final column will state the day you passed the exam and
    not an expiration date.
    As well, by passing this exam, I know that you also earned a Specialist: Server Virtualization with Windows Server Hyper-V and System Center certification title. This certification does
    not expire.
    Exam 74-409:
    http://www.microsoft.com/learning/en-us/exam.aspx?ID=74-409
    Have you looked at your MCP transcript to see if a expiration date is mentioned there? No matter what it states on the Prometric site, your transcript will describe any exam/certification expiration dates much
    more accurately.
    Also, I understand that the 74-nnn series exams are Microsoft partner exams. Perhaps they
    do require recertification to keep up to date with the latest certifications.
    If your transcript does really contain an expiration, you can contact Prometric about this and see if they can help you understand it. Here is the Prometric contact information for Microsoft exams:
    https://www.prometric.com/en-us/clients/pages/contact-numbers.aspx?client=microsoft
    As well, if they can't help you, you can call/email Microsoft Learning Support with information found here:
    http://www.microsoft.com/learning/en-us/help.aspx.
    Finally, if you want to be sure how this exam works against your employer's Microsoft partnership, you can log in and view the Partner support page here:
    https://partners.microsoft.com/partnerprogram/help/en-us/whgdata/whlstt14.htm#14
    I hope someone can help you get this cleared up.
    Good luck!
    Best wishes, Davin Mickelson

  • Snow Leopard not booting after installation in rEFIt triple boot system

    Hello,
    I have a Core Duo Mac mini, on which I was successfully using a rEFIt triple boot configuration with
    Leopard, Windows XP and Linux. After installing Snow Leopard on top of Leopard, Snow Leopard boots directly (without rEFIt showing up) the first time after installation. On the following reboots, rEFIt shows up but when selecting Mac OS, the system shows first the grey screen with the Apple icon, then it shows a grey screen with a "no access" icon and does not make any further progress. I reinstalled several times and at last I even removed rEFIt, but Snow Leopard won't boot anyway.
    Can anybody help? Thanks

    Welcome to Apple Discussions!
    I'd post a bug report here:
    http://sourceforge.net/tracker/?group_id=161917&atid=821764
    They could probably help isolate your problem.

  • During Windows install, says the Bootcamp Windows partition is incorrect file system and won't install

    I had another Macbook Pro retina which I installed Windows 8 on with no problems via bootcamp.  I just updated to the late 2013 model of the Macbook Pro, and attempted to do the same thing but have had problems.  I create the partition for Windows with Bootcamp, restart the computer, and after I enter my security key in the Windows installation screen it comes to the screen where you have to select the appropriate installation drive.  When I select the drive I created for Windows, it says that it can't install due to the file system.  I have no idea why I'm having this problem because I had done this once before....I can't for the life of me figure out what's wrong and I'm at a loss.
    If anyone can point me in the right direction I will greatly appreciate it...also let me know if there are differences from the early 2013 model and late 2013 model that would've created this problem.  Thanks!!
    Robert

    Well, here is what happened...
    Somehow in making a Windows partition then removing the partition so many times I created an error where it only showed 1/2 of my hard drive...like it was starting to create the second half for the windows side and ran into an error.
    So this turned out to be a blessing in disguise, because what I had to do was go to "Command + R" when I was starting up and format the entire drive, all 500 gb.  This formatted the whole drive and must've erased whatever was causing the trouble.
    Of course, then I had to reinstall OS X, and reinstall my Time Machine backup, but then I opened bootcamp and created the Windows partition again.  This time, when I ran the EFI installer you were referring to on the far right (which I had tried before), it allowed me to click next and continue once I selected the Windows partition.  Thank God!  It must've fixed whatever file system error was hanging it up there every time....because it's installing now.
    What I would suggest if all else fails, just format the whole dang thing.  Then try from square one and see if you can install

  • Fixing grub after reinstalling windows on a dual boot system

    SO i ned to reinstall widnows on my windows partition
    my partition table looks like
    sda1 windows
    sda2 swap
    sda3 root
    sda4 extended
    sda5 home
    What i dont want to happen is during the instillation of Micro$oft is my bootloader screw up and i cant boot into arch without being able to fix. 
    What steps do i ned to take before i install so that I do not have to reinstall arch again ot get the mbr disc correct?
    *BUMP**
    Last edited by nmodlin (2009-08-04 19:07:06)

    musta ruhtinas wrote:I don't think there is anything you can do prior to a Windows installation that will prevent it.
    The simplest way I know of to restore GRUB would be to use the Super Grub boot disk from here .
    +1
    Super Grub is your best friend
    It got me out of some very unplesant mbr/bootloader problems in the past

  • Does restoring a computer back to a certain date in time remove the Windows partition created by Boot Camp?

    If I'm wanting to restore my computer back to a certain date in time using a TM backup, will it remove my Windows partition? For example, say I choose to restore back to a date when I did not have the Windows partition on the computer, does it remove the partition, or does it keep it on the computer since it's a separate partition?

    I didn't say TM could use an MS-DOS partition. I just said "You can't really state that "Windows partition is invisible to TM", since a Windows XP partition could be formatted MS-DOS, and thus is not invisible to TM." I am right. You shouldn't make blanket statements that are not true.

  • Moved my mac over to a new HD and my Windows Partition no longer boots.

    Hello people smarter than me.  I seek knowledge and skills I do not posses.  I replaced my SSD with a bigger one going from 240gb to 960gb.  The old one had two bootcamp OS partitions (Mac, Windows) and four partitions (EFI System Partition, Recovery HD make up the remaining two)  I added a third (5th) partition that I labeled scratch (ExFat) that I intend to be a bulk storage for assets.  Currently it will boot MacOS but not Windows 7.
    My end goal is:
    240gb [Bootable, Mac OS Extended (Journaled), MacOS X, MacLandia-new]
    240gb [Bootable, NTFS, Windows 7, Winlandia-N]
    480gb [ExFAT, Scratch]
    Output from "sudo gpt -r -vv show disk0"
    gpt show: disk0: mediasize=960197124096; sectorsize=512; blocks=1875385008
    gpt show: disk0: Suspicious MBR at sector 0
    gpt show: disk0: Pri GPT at sector 1
    gpt show: error: bogus map
    gpt show: unable to open device 'disk0': No such file or directory
    Output from "sudo fdisk /dev/disk0"
    Disk: /dev/disk0 geometry: 116737/255/63 [1875385008 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 -  487274680] HFS+      
    3: AB 1023 254  63 - 1023 254  63 [ 487684320 -    1269536] Darwin Boot
    4: 07 1023 254  63 - 1023 254  63 [ 488953856 -  509388800] HPFS/QNX/AUX
    Output from "gdisk"
    Disk /dev/disk0: 1875385008 sectors, 894.3 GiB
    Logical sector size: 512 bytes
    Disk identifier (GUID): 151BF613-9829-4D05-87C8-1C064CF8AB85
    Partition table holds up to 128 entries
    First usable sector is 34, last usable sector is 1875384974
    Partitions will be aligned on 8-sector boundaries
    Total free space is 342059669 sectors (163.1 GiB)
    Number  Start (sector)    End (sector)  Size       Code  Name
       1              40          409639   200.0 MiB   EF00  EFI System Partition
       2          409640       487684319   232.4 GiB   AF00  MacLandia-new
       3       487684320       488953855   619.9 MiB   AB00  Recovery HD
       4       488953856       635437055   69.8 GiB    0700  Winlandia-N
       5       977496064      1875384319   428.1 GiB   0700  scratch
    Output from "diskutil list"
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *960.2 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Maclandia               249.5 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data Winders-New             75.0 GB    disk0s4
       5:       Microsoft Basic Data scratch                 459.7 GB   disk0s5
    Output from "sudo dd if=/dev/disk0s3 count=1 2>/dev/null | hexdump -C"
    00000000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
    00000200
    Thank you for all your help.
    -Harlune

    Windows does not work from an external USB drive. It never has.

  • After HD change, Windows partition no longer boots up

    Recently, I replaced my internal Hard drive on an early 2008 Macbook with  a Solid State Drive. The original Hard drive had both an OS X partition and boot camp partition. I am currently using this drive as a external storage device (I did not delete anything, both partitions are still there with their respective operating systems) via a USB hard drive enclosure. Occasionally, I need to boot into Windows, but when I try to boot off the external drive, I get a black screen with a small blinking white line, and eventually, the error message that there is no bootable media. Please help!

    Windows does not work from an external USB drive. It never has.

  • Resizing Windows Partition - No Longer Booting

    Whenever I attempt to setup a Windows/Linux Dual boot I get hit with this same dilemma. I start off with a NTFS format partition with Windows XP on it. As soon as I resize the partition, it no longer boots. Even before installing linux/grub. I defragmented before attempting this, and I took every precaution. In the end, I'm never able to boot my Windows OS. I can boot Linux from the Grub menu, and I can still access my Windows files.
    As of now I've reformatted back to Windows. I would just like to know what went wrong because I want to attempt another install later on.

    Ward,
    windows is weird in that it notes somewhere the block numbers where the system is installed, and when that moves
    it does not boot anymore.
    Now you are making life more complicated then necessary: if you still have windows resized and installed (and not booting),
    you can use the windows install cd and go into repair mode. It will fix the resized windows.
    If you are starting from scratch, before installing windows, start a Linux live CD, do not install it, start the program
    "gparted" and partition your disk as you want it. Then install windows in one of the partitions.
    Instead of the Linux live CD you can also use a Gparted  stand alone CD:
    http://gparted.sourceforge.net/livecd.php
    Hope it helps.
    Mektub

  • URGENT: Exam 74-409: Server Virtualization with Windows Server Hyper-V and System Center.

    Hi every one,
    I passed my first certification exam of Microsoft (74-409) and luckily passed the exam in 1st Attempt.and receive PASSED
    Status sheet  form PROMETRIC center they told me to check email within 15 days u receive ur certificate.
    But What Happen . after 2 day's i receive email from Microsoft ([email protected])
    Message Is below
    Hello
    Your goal of earning a Virtualization certification on Windows Server and System Center technologies is still within reach. Due to the popularity
    of the original exam offer, the voucher you previously received is no longer valid. That does not mean that we won't offer help for you to gain your Microsoft Specialist certification for exam 74-409. Because we know that enhancing your Hyper-V expertise can
    help improve your career options, we are offering a limited time offer of 50% off
    74-409 exam.
    Microsoft and Microsoft Learning Partners offer exam preparation resources depending on your learning goals and desired training format.
    WHAT CAN I DO???????
    please help any one..

    Hi,
    It can take more then two days to receive the mail for passing the exam, the email you received  might have been a general email.
    You can contect your regional Microsoft service:
    http://www.microsoft.com/learning/en-us/help.aspx
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer MCSE:Server Infrastructure,
    Danny van Dam
    MVP, MCC

  • How to back up a Windows partition created in Boot Camp in Lion.

    Hello. I have Lion installed and I already had Windows 7 installed aswell. I used boot camp. Boot Camp booted Win. 7 just fine. Then, yesterday, I tried to boot into Win. 7 and all that apeared was a Black screen with a dash in the upper left hand corner blinking. I let it sit like that for 30 minutes. I eventually lost patients and held the power button for 5 sec and booted back into Lion. I have many files in Windows 7 that I need. I have no backup of Win 7 but I do have a backup through Time Machine of when it was working. My main Question is this, when I'm in Lion, how can I back up my Windows files and make a bootable image out of it so I can reinstall it through bootcamp. I need to keep my files and there is no chance of me restoring from a past Time Machine backup as I need all of my files on Lion aswell. Oh, BTW, im using a 2011 Mac Book Pro with all the latest updates. Any help is apreciated. Thanks!

    Hi,
    I used a digital copy of Windows 8.1 to install it through Boocamp. It was the MSDN version of Win 8.1.
    Best regards,

  • Can I use a digital download of Windows 8.1 to install Windows in the Windows partition created in Boot Camp or do I need the Windows 8.1 DVD physical copy to do the Windows 8.1 installation?

    Windows 8.1 installation on MacBook Pro

    Hi,
    I used a digital copy of Windows 8.1 to install it through Boocamp. It was the MSDN version of Win 8.1.
    Best regards,

  • Arch, Windows 7 and PC-BSD Triple Boot

    Hi Folks,
    Thinking about setting up a triple boot system like the one described above. I have had numerous ideas for a partitioning scheme, but nothing seems neat because of the requirement that both Window and BSD need to be on a primary partition.
    My basic requirements are:
    Arch Linux
    separate /boot (as I want to use BTRFS for root)
    /root (BTRFS)
    /swap (not essential for Arch, as I have 4 GB RAM)
    (Is a home required, or can I have a tiny /home for .(config) files?)
    PC-BSD
    separate /boot (as I want to use ZFS)
    /, /var, /usr (ZFS pool)
    /swap (essential for ZFS as I have heard it is RAM hungry)
    (Is a home required at all. First time with BSD, so not sure how it works)
    Windows
    1 large C: drive (Easy)
    Shared storage drive
    (recommendations for the most mutually compatible file system? It pains me to say, but FAT32?)
    So, should I go with the GUID partition table so I can just make all of these, or is there some clever trickery? I was considering LVM to make my Arch root and small home, but that does not really solve the four primary partition limit on the MBR.
    I should add, I have a working Windows 7 and Arch setup and my main reason for wanting a BSD is so that I have the full gamut of OSes for learning and experimentation. I like the idea of Windows 7, an Arch/BTRFS/Gnome and a BSD/ZFS/KDE...
    Any advice would be greatly appreciated!
    Scott
    Last edited by well.heeled.man (2011-07-31 00:14:11)

    @well.heeled.man
    from my own experience i would recommend you pure FreeBSD instead of PC-BSD (even tho they are the same in nature), the main problem is that pc-bsd is somehow not complete .. too many preinstalled stuff, ports witch is 1st thing to learn in FBSD is way too complicated with those jails.. and never the less fbsd + kde is not a good start - better use xfce at most
    as for partitions well ...
    I think FreeBSD/PC-BSD uses a single physical partition, logically sub-divided to allow for snapshots
    yes that is true
    as for zfs start learning by use files instead of partitions or harddrives unless you are ready to loose your data O.o
    example
    cybertorture@ego ~
    > sudo zpool status
    pool: tank
    state: ONLINE
    scan: resilvered 32,5K in 0h0m with 0 errors on Tue Aug 2 01:45:54 2011
    config:
    NAME STATE READ WRITE CKSUM
    tank ONLINE 0 0 0
    /home/zfs ONLINE 0 0 0
    /home/zfs1 ONLINE 0 0 0
    /home/zfs2 ONLINE 0 0 0
    /home/zfs3 ONLINE 0 0 0
    /home/zfs-spare ONLINE 0 0 0
    spares
    /mnt/data/zfs-test AVAIL
    errors: No known data errors
    cybertorture@ego ~
    > ll /home/zfs*
    -rw-r--r-- 1 root root 512M 2 авг 1,53 /home/zfs
    -rw-r--r-- 1 root root 512M 2 авг 1,53 /home/zfs1
    -rw-r--r-- 1 root root 512M 2 авг 1,53 /home/zfs2
    -rw-r--r-- 1 root root 512M 2 авг 1,53 /home/zfs3
    -rw-r--r-- 1 root root 512M 2 авг 1,53 /home/zfs-spare
    about GPT, any reason not to use msdos ? maybe you have 2.2+ GB harddive  ?
    edit: about partitions
    sda1 ntfs - windowze
    sda2 ext2 - boot (safe bet)
    sda3 ufs - fbsd
    sda4 - extended
    sda5 btrfs - arch
    sda6 ntfs - shared storage
    Last edited by cybertorture (2011-08-02 00:39:51)

Maybe you are looking for