Order Type Transaction Error in Customer_Main Initial Load

Hi,
We have recently copied back our Production System to our Test System in R/3. We are now in the process of filtering the CUSTOMER_MAIN into our CRM 2007 Test System from the new updated Test System in R/3
However, when loading the objects into CRM we are getting the following BDoc errors in smw01:
Business transaction type ZXXX does not exist
Area: CRM_ORDERADM_H
No.500
These are Order Types that have been created in the R/3 System. However, how can we prevent these order types from coming across??
Order Types are not relevant to us when we are bringing across Customers.
Thanks,
Jonathan

Hi,
Check and update filter settings in SALESDOCUMENT adapter object in R3AC1.
//PBP

Similar Messages

Error in DNL_CUST_PROD1 Initial Load

While attempting to carry out the initial load for object (DNL_CUST_PROD1) from R/3 to CRM an inbound queue is generated with status SYSFAIL containing the following error message:
It is not posible to import material type to hierarchy ZBP_CRM_PT....
(Message no. SR053)
The Hierarchy mentioned in the message refers to one that was created manually in CRM before the initial load.
It was under my understanding that the only hierarchy impacted by the initial load was the R3MATCLASS, then why is this error generated for another hierarchy that should not be involved?
Regarding this issue I feel I have two options:
1. Delete the hierarchy in CRM and restart the initial load. (The only problem here is that I have found it really dificult to carry out the deletion, because it means I have to delete products and IObjects created in CRM that are associated to this hierarchy)
2. Try to find a way to prevent error to appear in the inbound queue. (for example in debugging try to bypass the logic that processes the manually created hierarchy)
Please I would greatly appreciate to get an answer from anyone that has encounterd similar problems.
Thanks in advance,
Pedro

Dear Efrain Pacheco
Just have a look into the corresponding entry in ST22 .
The problem persists due to the duplicate entries in the table T023 or .
Delete them directly from the table using se16:
Select the entries in the classic view (not ALV or grid view). activate the debugger.
Press the view button. --> you'll enter in the debugger
Press F7
Locate the sy-ucomm variable & change it to "DELE".
Press F8
Delete the entries.
Trick-shots but it works!
Let me know in case of any persistent problems .
 Note: Reward points if it helps
Thanks & Regards
Jaman

Error AS ABAP initial load

At my initial load AS ABAP, the following error showed up:
putNextEntry failed storingS_A.SHOW
Exception from Add operation:com.sap.idm.ic.ToPassException: ToIDStore.addEntry failed storing entry 'S_A.SHOW'. IDStore returned error message: " No such attribute:Attribute: ACCOUNTM23_ME5" when storing attribute 'ACCOUNTM23_ME5=S_A.SHOW'
Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed updating entry 'S_A.SHOW'. IDStore returned error message: "Entry does not exist" when fetching entry
This error message affects all users. Where can I add the missing attributes?
Thanks for your help!!!

Gerhard,
Could you please share the solution?
Thanks.

SYSFAIL error SMQ2 during initial load of PLANTs

Hello Everyone,
We are on CRM50 and during the process of the initial download of plants not all plants were replicated. Now we are attempting another load using DNL_PLANT and getting the following error:
Business partner ##1 does not exist. I have not seen this error before and I am not sure how to proceed.
Thanks in advance for your help.
Cheers
Wiktor

Hello Tiest,
That did not seem to be the issue. I went through and validated the load objects and there was some new configuration in the sales area which I moved over. All other objects loaded correctly.
When I executed DNL_PLANT got:
Not all address numbers have yet been issued.
More confused then before. Any other thoughts?
Thanks for the help!
Cheers
Wiktor

Error in Material Initial Load.

Hi Gurus,
I am replicating materials from ECC to SRM, but the BDOcs in SMW01 have errors, alhtough they appear succesful.
The error is: "Mat. for Initial Download: Table not supported by function - Message no. C_"
All the materials have been replicated, but what is missing are three custom fields that we need to replicate from ECC and for which we have made an enhancment.
This issue is happening in QAS, and in DEV everything went fine. We have checked and all the transports have been succesfully moved from DEV to QAS.
Please help.
thanks!
Edited by: Michele Camuri on Apr 8, 2009 12:02 AM

i had the same problem and the problem comes because of the following reason.
1) the product category corresponding to the material is not available (or) is still not replicated in the SRM system.
solution is a) check whether all the product categories are already replicated correctly in the SRM system , if not restart the replication of master data ( product category, unit of measure).
b) once the product category is available , then restart the inbound queue , so that the replication of the material is started again.

Microsoft JScript compilation error alert on initial load using IE7

I have noticed that a javascript alert window is displayed whenever an Applet is initially launched using IE7.
This does not happen using IE8 (or FF, SF, Chrome, etc).
I thought it was our implementation, but the alert is also shown launching any Applet from the following;
http://java.sun.com/applets/jdk/
There are typically 2 alerts and after pressing OK, the Applets appear to run successfully.
The specific error is;
Alert title: Microsoft JScript compilation error.
Alert content: Expected ')' in regular expression.
I don't always remember this error using IE7.
Maybe it's related to the JRE?
I am currently using: (build 1.6.0_26-b03)
Any solution out there?

879129 wrote:
..I thought it was our implementation, but the alert is also shown launching any Applet from the following;
http://java.sun.com/applets/jdk/
I just had a look at the source of two of the pages from the 1.4 section of that page (Animator (1) & ArcTest) & saw some very questionable HTML for the <tt>applet</tt> element, as well as two seemingly unrelated scripts. What do you get for (instead of those), the GIF Animator (the applet form)? It uses <tt>deployJava.js</tt>, which is about the only deployment option that Oracle cares about at the moment.

Initial load of data to UCM for Customer Hub PIP

Hi,
What is the recommended approach to have XREF tables populated during an initial load to UCM (via EIM), when the Accounts already exist in Siebel CRM?
Our approach as of now, using EIM, is as follows:
1) Set required customer information in EIM_UCM_ORG
2) Look up the customer's existing Row_ID in Siebel, and populate EIM_UCM_ORG.EXT_SYSTEM_NUM and EIM_UCM_ORG.UCM_EXT_ID) accordingly
3) Run the EIM job and UCM Batch Process to import the customer into UCM
The account then appears in UCM with the correct reference to siebel/row_id under the "external account IDs" tab. HOWEVER, it also contains a reference to a newly created duplicate record for that account in Siebel. Looking at the xref tables, there is no reference to the existing Siebel/row_id specified in the EIM batch load, and our hypothesis is that this is the reason the account cannot be found (and a duplicated is created). What we want to achieve here is to tell UCM that the accounts we are inserting do infact already exist in Siebel CRM, and can be identified by the row_id that we pass along.
The relevant system versions are Customer Hub PIP 11g with AIA 3. Siebel CRM and Siebel UCM are on patch 8.1.1.7 (and pertinent ACRs have been incorporated in the two Siebel instances).
Any hints or suggestions on how to approach this would be appreciated
-M
Edited by: 968713 on Nov 1, 2012 5:05 AM
Edited by: 968713 on Nov 1, 2012 5:05 AM
Edited by: 968713 on Nov 1, 2012 5:06 AM

Do you really need to populate the XREF table/transaction History table for initial load?

Which order type gets collected and is used for forecast consumption

Hi all,
I would like to know which Order Types (transaction types) get collected into ASCP (appear as demand) and which Order Types are used for forecast consumption.
I tried to find something in the user guides, but had not yet success :(
What I want to do:
1. decide which order types are collected or not
2. decide which order types consume forecast or not
Anyone any advices?
Big thanks in advance,
David.

Hi,
Rather speaking like Order types, we may use word Sales Order. ASCP will collect all the Sales Orders for which we need to intiate action for Supplies. How it is determined?. It is determined from SO lines where in we have So lines are scheduled(it is prt of Workflow action too) and It is flaged 'Yes' for "Visible Demand Flag" . This is what designed functionality. We do not care what type of order type it is.
thanks,
dr

Middleware initial load error on funcloc segment type (ADR2) does not exist

Hello,
We are doing initial loads of data into a new CRM 7.0 system.
So far all objects have been done except Functional locations (FUNCLOC).
During the initial load of the functional locations the various BDOCs all go into error state.
The error is the same everywhere: segment type adr2 does not exist.
If we deactivate the adr2 table In transaction R3AC1 and process again, we get the error message for the next table
(Like: segment type IFLOTX does not exist) and so on.
IS there any settings we can do to manage these 'segments' or would there be another wa to solve this?
Thanks.
Joram

Hello,
Take a look at note 1271465, it does not talk about the ADR2 segment but about segment errors in SMW01 for functional location download. It might be useful. Observe especially the constraint in ERP version number, it might be that your ERP system is out-of-date/incompatible for this scenario.
Second thing to check, go to SPRO>CRM>Master Data>Installed Base>Replication of technical objects from ERP
There you'll find a mandatory customizing activity for Functional location download.
And in the documentation of activity "Replication of Functional locations: Prerequisites and General information" you'll find all the necessairy actions to perform.
This helped me in setting up funcloc replication in CRM 7.0.
Hope this helps,
Kind regards,
Joost

Initial Load Error - No generation performed. Call transaction GN_START

Hi Folks,
We are doing middleware configuration for data migration between R3->CRM.Have followed "Best Practies" configuration Guide.
System Using; CRM 2007 and ECC6.0
Issue
While performing initial load, system is throwing the error as
001- No generation performed. Call transaction GN_START
002-Due to system errors the Load is prohibited (check transaction MW_CHECK)!
After calling the transaction GN_START system asks for job scheduling,whereas I have already scheduled it.
A job is already scheduled periodically.
Clicking on 'Continue' will create another job
that starts immediately.
After checking(MW_CHECK),message is displayed as
No generation performed. Call transaction GN_START.
If anybody has encountered the similar issue and has resolved it,their guidence will be greatly appriciated.
Thanks in Advance
VEERA B

Veera,
We also faced the same problem when we have done the upgrade from CRM 4.0 to CRM 2007.
For that you go to SMWP where you can see all the errors related to Middleware with the error message so try to remove the error,
Also pls check in RZ20 and activate the middleware trace tree.
Regards
Vinod

Initial ABAP load is giving 2 different types of errors

Hi,
I have ran the initial load job after successfull completion of read help and initial provisioning jobs, however the initial load job gave some errors as follows.
Pass: WriteABAPUsers
Error: runFunctionsInString($FUNCTION.sap_convertABAPLangToISOLang()$$) got exception
undefined: "sap_lang2ToLocale" is not defined.
Error: runFunctionsInString($FUNCTION.sap_convertABAPLangToISOCountry()$$) got exception
undefined: "sap_lang2ToLocale" is not defined.
These errors are repeated 40 times
Pass: WriteABAPUsersRolePrivilegeAssigments ( repeated for all users)
putNextEntry failed storingASINGH
Exception from Modify operation:com.sap.idm.ic.ToPassException: ToIDStore.modEntry failed modifying entry 'ASINGH'. IDStore returned error message: "INTERNAL ERROR" when storing attribute 'MXREF_MX_PRIVILEGE={ValidFrom=2010-06-14!!ValidTo=9999-12-31}<PRIV:ROLE:MI1400:ZS:SAP_ALL_USERS>'
Please help urgently as I am on the hot seat.
Regards,
Ritesh Soni

Hi,
I installed the new patch and deployed with SDM -
IDMIC05_2-10007482.SCA
Earlier i deployed just IDMIC with patch level 0 and thats why i was getting the error.
After this I had to do re-import of provisioning framework
and I had to re-create teh ABAP initial load
After running the job ; I was able to run it with no errors.

No initial load of Customers, Material and delta load of Sales Orders.

Hi Experts,
I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
- Customer_main load, it was succesful, but no BP's of R/3 are available.
- Material, it failed in SMW01, SMQ2, the errors are:
Mat. for Initial Download: Function table not supported
EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
Plant xx is not assigned to a business partner
- Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
Thanks,
-Pat

Hi Ashvin,
The error messages in SMW01 for MAterial initial load is :
     Mat. for Initial Download: Function table not supported
     EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
     EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
     Plant 21 is not assigned to a business partner
I have done the DNL_PLANT load successfully. Why then the plant error?
Some of the messages for BP:
Messages for business partner 1331:
No classification is assigned to business partner 1331
For another,
     Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
     City Atlanta does not exist in country US
     Time zone EST_NA does not exist
     You are not allowed to enter a tax jurisdiction code for country US
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
Till these 2 are not solved, I cannot go into the Sales order loads.
Any ideas will be greatly appreciated.
Thanks,
-Pat

Error while Initial load

Hi Forum,
Iam doing Middleware setup for downloading customer master from R/3 to CRM.Iam trying to do initial load of customizing objects viz.,DNL_CUST_ACGRPB,DNL_CUST_ADDR,
DNL_CUST_KTOKD,DNL_CUST_TVKN,DNL_CUST_TVLS,DNL_CUST_TVPV... which are to be loaded before doing initial load of CUSTOMER_MAIN.
while doing initial load of customizing objects iam getting the below mentioned error
001 No generation performed. Call transaction GN_START.
002 Due to system errors the Load is prohibited (check transaction MW_CHECK)!
-when I do GN_START
"A job is already scheduled periodically.
Clicking on 'Continue' will create another job
that starts immediately.
Do you want to continue?" message is displayed
and I have sheduled it.
But in SMWP transaction I can see in
BDoc Types: Generation of other runtime objects
Not generated / generated with errors 2 entries
 31.08.2006 05:33:50
and the objects with errors are
POT_LISTWRITE
SPE_DDIC_WRITE
-In transaction MW_CHECK, system displays message as No generation performed. Call transaction GN_START.
when I regenerate these objects(generated with errors)from the context menu I find no difference.
I have also referred to the Note :637836 and 661067 which also suggests to run few reports and GN_START but inspite of doing all the corretion parameters in the note Iam still unable to come out of the situation.
Please Guide
Thanks in Advance
Shridhar.
Message was edited by: Shridhar Deshpande

Hi Rahul,
Thanks for the reply.I checked in transaction MW_CHECK and the system throws the message as
No generation performed. Call transaction GN_START.
In the long text the below message is available
No generation performed. Call transaction GN_START.
Message no. SMW_GEN_KERNEL005
Diagnosis
An upgrade was performed.
System response
The Middleware is stopped because MW objects must be generated.
Procedure
Excecute transaction GN_START.
If GN_START is executed,I dont find any change.
I also checked in smq2in CRM and I found the status of the queue as below
 CL Queue Name Entries Status Date
200 CSABUPA0000000042 5 SYSFAIL 31.08.2006 09:54:05 31.08.2006 09:54:11
Thanks
Shridhar
Message was edited by: Shridhar Deshpande

Sales document types during initial load

Hi Gurus,
Landscape - SAP R/3 4.6 c, CRM - 4.0
We are starting the initial load for the Sales documents, item categories etc.
For the same, for the document types in R/3, we have the same document type in CRM.
Question 1- Do I need to configure the partner determination, incompletion log etc for the document type before the initial load or I can do it later once the data is in CRM.
Question 2- Is it mandatory that for all the doc types in R/3, we have the respective document type in CRM? Logically yes, if yes, where can I find the mapping? For example for OR in R/3, there is a TA in CRM.
Request someone to answer this ASAP.
thanks
Yash

Hi Yash,
I think the behavior is just use the same code
of Transaction Type in CRM and Order Type in R/3.
Since partner determiniation using different partner
function codes in CRM and R/3, maintained or not in R/3,
you may still need to maintain it again in CRM.
For document, what you can do just create same document
type (Transaction type) for R/3 and CRM. And depends upon
you sceneario (in CRM there are several scenarios such as
document created in CRM and transfered to R/3 Or download
R/3 document into CRM - no transaction in CRM).
Especially for partner, you may need to setup data
transfer CRM to R/3 or R/3 to CRM in CRM configuration.
And in R/3 you need to define it in tcode PIDE.
Hope this helps.
Cheers,
Gun.

DataSource 2LIS_17_I3HDR not loading all order types in setup tables

I am trying to setup data source 2LIS_17_I3HDR. I have initialized the setup tables and I am only getting 609 records in RSA3. The problem is that all the records are from only two order types. I have run the setup table initialization wide open so i'm not sure why the setup table only contains a subset of our orders.
Obviously we have numerous other order types that I am expecting to be loaded into the setup tables (AFIH has around 180k entries). Where can I configure which orders get loaded into the setup tables?
Thanks,
Chris

That is an interesting thread. I have a few questions though:
-How can I determine which order types are maintenance orders? When I look at transaction OIOA for Order Type Configuration I see that order category for numerous order types including the order types currently being loaded as having an order category of "30 Maintenance order" so I am unclear which field I need to be looking at for orders because in OIOA I see at least 8 other order types that look identical to the two order types being loaded. When I look in IW39 I am seeing orders under order types are being loaded and under order types that aren't being loaded
-In the linked thread it appears that the person with the issue was trying to pull detail data without header data. I believe I am doing the opposite with these orders. I am pulling the header data first. Currently when I run 2LIS_17_OPER (I think this is the order detail DS) in RS3 I get no data. Am I misunderstanding how the PM Order data sources work?
Thanks,
Chris

Order Type Transaction Error in Customer_Main Initial Load

Similar Messages

Maybe you are looking for