VISA GPIB problem after switchig from NT- W2000

application was written in LV 5.0.1 and run under NT for several years without problem. After installation of Win2000 the VI's communicating with instrr (GPIB) via VISA are not working.

Hello marekf,
Thank you for contacting National Instruments.
If you are using an older version if NI-VISA, the NI-VISA library
(visa32.dll) will fail to load when guests and non-administrators are
logged onto Windows 2000. Guests and non-administrators do not have
read/write access to the registry key that VISA is trying to access.
The symptom may be a warning dialog box from the OS or an error, (such
as -1073807360), in viOpenDefaultRM.
To avoid this problem, upgrade to the latest version of VISA or follow
the procedure below:
1. Log onto the computer as the administrator and open
the registry editor (regedt32.exe).
2. Explicitly grant the guest account write access
under HKEY_LOCAL_MACHINE\Software\National
Instruments\NI-VISA for Windows 9
5/NT. Choose
the Security>>Permissions menu item.
If "Everyone" is present, double-click it and
modify the permissions to "Full Control". If not,
click "Add", choose "Everyone", and give
them "Full Control".
The latest version of VISA can be obtained using the following link:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=132060_US
I hope this helps! If this does not solve your problem, let me know.
Matthew C
Applications Engineer
National Instruments

Similar Messages

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Problems after upgrading from 10.2.3 to 10.2.8

After upgrading from 10.2.3 to 10.2.8, itunes "unexpectedly quits" when I try to purchase a song, and safari "unexpectedly quits" when I visit certain websites. Before upgrading, no such problems.

Hello rick,
First of all, welcome to the Apple discussions.
* How did you upgrade the OSX 10.2.3??
* Did you use the combo update?
* Did you run the dick repair permissions before an after
Here is the Combo Update for OSX 10.x
Combo Update
An here is how you use the disc repair permissions
About Disck Repair Permissions
Applications Quits
Let me know if so ...
Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
Dimaxum <]:~))

Sound Problems After Restore from Hibernate Using uswsusp and pm-utils

I see mention of using /etc/pm/config.d/module to recycle certain kernel modules during suspend. Do I need to suspend all modules?
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CS4206 Analog [CS4206 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 1: CS4206 Digital [CS4206 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
[aj@mbp62 ~]$ lsmod | grep snd
snd_hda_codec_cirrus 8790 1
snd_hda_intel 36904 1
snd_hda_codec 149633 2 snd_hda_intel,snd_hda_codec_cirrus
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77709 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59173 8 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
soundcore 5450 1 snd
[aj@mbp62 ~]$ cat /etc/pm/config.d/module
SUSPEND_MODULES="bcma b43 snd_hda_intel"
SLEEP_MODULE=uswsusp
Any pointers?

This morning, I rebooted for half an hour without success:
After resume from hibernate, most of my machine froze like described above.
After first reboot, it worked for 1 minute, then I had a full freeze (nothing worked... no mouse, no normal keys, no magic keys, screen frozen...)
After second reboot, my wifi adapter was gone. It showed up in lspci and looked like this:
04:07.0 Network controller: Atheros Communications Inc. AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] (rev 01)
Subsystem: Atheros Communications Inc. Device 3071
Flags: 66MHz, medium devsel, IRQ 22
Memory at feb70000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] #80 [0000]
...but not in ifconfig. I found the following in dmesg:
[ 7.106070] ath: phy0: address test failed addr: 0x00008000 - wr:0x00080008 != rd:0x00000008
[ 7.106181] ath: phy0: Unable to initialize hardware; initialization status: -19
[ 7.106287] ath9k 0000:04:07.0: Failed to initialize device
Problem persisted over 10 poweroffs/reboots (also hit the "on" button a few times with the pwoer cable disconnected, trying to make it "reset" or something. Did not help this time, might have been coincidence the last time that worked.

Problems after resuming from hibernation

I’ve been getting horizontal lines and sound distortion after resuming from hibernation. Has anyone had similar problems or found a solution for this yet? I’m on Lion OS X 10.7.3.

Rorschach wrote:What freezes? Just X or the whole kernel? Can you ssh to your machine?
Now it doesn't freeze anymore. I really don't know what the heck is going on on my machine.
Next time that the machine freezes I'll try to ssh to it. Thank you for pointing this out.
Last edited by ArchArael (2010-03-26 15:56:17)

Anyone's MacPro have problems after waking from sleep mode?

After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.

Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

Performance problems after Update from 7.6.00.37 to 7.6.03.15

Hi,
after the Update from 7.6.00.37 to 7.6.03.15 in our live system we noticed a lot of performance problems. We have tested the new version before on our test system, but there don't noticed effects like this.
We have 2 identical systems (Opteron 64 bit, openSuse 10.2) with log shipping between them. We updated first the standby system, switched from online to standby (with copy of cold log) and started the new server as online system. After that we run a complete backup (runtime: 1 hour) for starting a new backup history and for activating autolog. Then
With the update we changed USE_OPEN_DIRECT to YES, but the performance of the system was very slow afterwards. After the backup it remains at a high load average (> 10, previous system had about 2-4), with nearly 100% of CPU usage for the db kernel process.
Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but periodically rises up to a load average of 6 and slow down the performance of various applications (somebody says about 10 times slower). Here we also noticed a high usage (now 200-300%) of the db kernel process.
Our questions are:
1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
2. Are there any other (new) parameters, which can help? Maybe reducing MAXCPU from 4 to 3 for reserving capacities for the system (there is only one maxdb instance running)?
3. Is the a possibility to switch back to 7.6.00.37 (only for worst case)?
I have made some first steps with x_cons, but don't see any anomalies on the first look.
Regards,
Thomas

Thomas Schulz wrote:>
> > > Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but
> >
> > What is it about this parameter that lets you think it may be the cause for your problems?
> After changing it back to NO, the system runs better (lower load average) than with YES (but much slower than with old version!)
Hmm... that is really odd. When using USE_OPEN_DIRECT there is actually less work to do for he operating system.
> > > Our questions are
> > >
> > > 1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
> >
> > Yes - of course. Changes are what Patches are all about!
>
> Are there any known problems with updating from 7.6.00.37 to 7.6.03.15?
Well of course there are bugs that have been found inbetween the release of both versions, but I am not aware of something like the performance killer.
We will have to check this in detail here.
> > > I have made some first steps with x_cons, but don't see any anomalies on the first look.
> >
> > Ok, looking into what the system does when it uses CPU is a first good step.
> > But what would be "anomalies" to you?
>
> Good question! I don't really know.
Well - then I guess 'looking at the system' won't bring you far...
> > Do you use DBAnalyzer? If not -> activate it!
> > Does it gives you any warnings?
> > What about TIME_MEASUREMENT? Is it activated on the system? If not -> activate it!
>
> OK, that will be our next steps.
Great - let's see the warnings you get.
Let us also see the DB Parameters you set.
> > What parameters have changed due to the patch installations (check the parameter history file)?
> >
> > What queries take longer now? What is the execution plan of them?
>
> It seems to happen for all selects on tables with a lot of rows (>10.000, partially without indexes because automatically generated). With the old version we had no problems with missing indexes or the general performance. Unfortunatly it is very difficult to extract some sql statements out of the JBoss applications. But even simple queries (without any join) runs slower, when the load average rises over 4-5.
Hmm... the question here is still, if the execution plans are good enough to meet your expectations.
E.g. for tables that you access via the primary key it actually doesn't matter how many rows a table has (not for MaxDB at least).
> > BTW: how exactly do the tests look like that you've done on the testsystem?
> Usage over 6 weeks with our JDBC development environment (JBoss), backup and restore with various combinations of USE_OPEN_DIRECT and USE_OPEN_DIRECT_FOR_BACKUP.
Sounds like the I/O is your most suspect aspect for overall system performance...
> > Was the testsystem a 1:1 copy of the productive machine before the upgrade test?
> No - smaller hardware (32 bit), only 20% of data of the live system, few db users and applications.
>
> > How did you test the system performance with multiple parallel users?
> Only while permanent development with the 2-3 developers and some parallel tests of backup/restore. Unfortunately no tests with many users/applications.
Ok - so this is next to no testing at all when it comes to performance.
> An UPDATE STATISTICS over all db users seems to change nothing. At the moment the system remains markedly slow and we are searching for reasons and solutions. Another attempt will be the change of MAXCPU from 4 to 3.
Why do you want to do that? Have you observed any threads that don't get a CPU because all 4 cores are used by the MaxDB kernel?
regards,
Lars

Thinkpad G40 keyboard problems after updating from W98 to W7

Hi community users.
I'm new here with a, for me, typical problem.
I’m having a problem with my Laptop keyboard IBM ThinkPad G40, type: 23884SG, Windows 7.
Since I updated from Windows 98 to Windows 7 the keyboard definition is wrong. I’m not able to find the right configuration of it on base of the standard list of country and language definitions in W7.
Who can help me with this.
I already installed some drivers from the Lenova site but nothing seems to help.
So the problem is that I can’t find the right service from the country and language menu to the keyboard in W7.
All suggestions are very welcome.
Thanks in advance,
Dirk
Moderator Note; s/n & UUID edited for members own protection

Hi Vince,
Thanks for your response to my problem.
Problem isn't the choice of the specific language. The problem after the update is that I'm not able to choose the right combination of language and the type of keyboard selection in Windows 7. The selection list is long: from South-Africa to Sweden.
Although most of the characters on the keys on the lower part of the keyboard correspond with the ones on the screen but especially the keys on the upper part don't.
So I'm searching to a correct selection of the combination language and specific type of keyboard. Or there must be some driver witch can be download.
Looking forward to the feedback.
Kind regards,
Dirk

Problems after migration from CS5 to 5.5 with Blackmagic Card

Hello forum,
we have an problem after an optimal migration from cs 5 to 5.5 projects.
different: there is an bm hd extreme 3d card in the system.
We are aware of the issue that there has to switch to BM player an the Timleinl settings to BM
But there is still a problem: we are not able to view the ingested material in the source viewer,
because there is another overlay - form the background or sometheing else - see attached photo.
We add new drivers for graphics/BM and patches for CS 5.5
None of these problems by creating new projects.
Also the applications also hangs after we try to close,
many thanks for your answers - Sven.

No reason to ask the same question twice. Just be aware that there are German forums as well.
Your problem is probably in the BM drivers.

Sound problem after waking from sleep

When I wake my computer from sleep the external speakers to do not produce sound. This is not related to the 'red light' issue, no red light is shining and in the sound control panel 'internal speakers' is showing.
Interesting is that when I play with the alert sounds in the control panel I can hear them, but when I adjust the volume or try to get sound out of software (iTunes, Quicktime, etc.) I can not hear anything. Also, when the computer is waking from sleep if I quickly toggle the volume control I get one or two 'clicks' before it goes silent. I have repaired the permissions according to other posts but that did not help.
However, if I plug in earphones and take them out again the volume works. . .
any suggestions?

Todd Sackett wrote:
Hi everyone, after waking from sleep, the first sound that is played is accompanied by a hissing sound for the first couple seconds. It does not happen after that at all that I have noticed. It comes out of either the speakers or headphones.
Can anyone try this: (Esp. if you have a new MB Penryn update (most recent))
1) Close lid, put to sleep.
2) Wait 5-10 mins
3) Open lid, log in to iChat (with login sound on) or make some other sound play. Listen for a hissing or static sound within the first couple seconds of whatever you just played.
Thanks for any help!
I don't observe this on my Napa-Revised Macbook

Problem after upgradation from Oracle 8.1.7 to Oracle 9i

Hello ,
I currently installed Oracle 9i, and i m using Mapx 4.5,
and in the executable I am adding serverlayer
(a layer formed by querying the geoloc column from oracle
table), which was working fine with Oracle 8.1.7, but after
installation of Oracle 9i , i encounter the following error
while adding a serverlayer
ORA-13373 Element of type Extent is not supported for Geodetic
data
Cause: Element type extent for a polygon geometry is not
supported for
geodetic data.
Action: Convert the extent type polygon to a regular 5 point
polygon
and set
etype accordingly.
ORA-06512 at string line string
Cause: Backtrace message as the stack is unwound by unhandled
exceptions.
Action: Fix the problem causing the exception or write an
exception
handler
for this condition. Or you may need to contact your application
administrator or database administrator
Can anybody tell me what's going wrong ?
As I urgently got to fix it.
Thanks in advance
Binoy.

Hi,
Oracle9i has a geodetic data model. Your data has a geodetic
srid, which means that the data will need to conform to the rules
associated with geodetic data. These rules include:
No optimized rectangles are supported (my guess is the app is
using an optimized rectangle as a query window, but the data
could be the issue also).
No arcs or circle types are supported.
A single line segment cannot be equal to or greater than 1/2 the
great circle distance.
A polygon cannot have an area equal to or greater than 1/2 the
surface area of the earth.
You should try to find what version of Mapx supports Oracle9i.
Regards,
dan

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

WiFi problems after changing from WEP to WPA on Actiontec router

I need some help/advice--I've searched the forums but am not seeing my exact problem described so decided to describe it to see if the community can help me figure out what to do now. The situation is this: After recently learning about the insecurity of WEP "security" I decided to change the security settings on our Fios router (an Actiontec MI424WR, Rev C). I first tried to change the settings to WPA2, but then my husband's elderly Dell laptop could not connect, so I changed them to WPA. At first everything seemed fine--we could connect to the internet from our computers (my MacBook Pro, his Dell, and various devices--phones, kindle, iPad).
But we soon noticed some strange problems that I was never able to resolve:
I could never get either of two Airport Expresses to connect to the network, even after repeated tries (with hard resets in between)
Within an hour or two after rebooting the router, I was no longer able to connect wirelessly to a NAS device that is connected to the router via an ethernet cable--I could no longer even see it in the Mac finder. I could see it in Windows Explorer from the Dell but could not connect.
Similarly, I lost contact with a Sonos bridge unit that is also connected to the router via an ethernet cable. In this case the loss of contact was sporadic--various devices that connect over WiFi to the bridge could sometimes see it, sometimes not.
Resetting the router would temporarily restore wireless access to the devices hardwired to the router, but I would always lose the NAS device completely after an hour or two and the Sonos bridge sporadically. The computers and devices, however, had no problems connecting to the router itself and from there to the internet.
I finally gave up and returned the security to WEP, and now everything is fine: the Airport Expresses connect, the NAS remains available, and the connection to the Sonos bridge over WiFi is robust (the Sonosnet mesh, if anyone is wondering, was never affected).
I can't understand why switching to WPA caused such problems, but it clearly did, since switching back to WEP eliminated them completely. The simplest explanation is that there is some problem with the wifi portion of the rev C router that only becomes apparent in certain circumstances, though it seems weird that both wired peripherals and wireless airport expresses were affected.
Whatever the causes of the problem, now I'm back to wondering how to improve the security of my network. Should I:
See if I can convince Verizon to replace the modem with a newer version? We have had this one for more than 4 years, since we first got fios.
Just go ahead and purchase the most recent version of the Actiontec router (rev G)? It's only about $115--worth it to me if I can use WPA with it.
Buy our own wireless router, perhaps an Airport Extreme, and turn off the wireless on the Actiontec.
Thanks in advance for any help. This is driving me crazy, and I really don't like feeling as if the network is vulnerable, especially given how extensively we use it.
Becky

This doesn't sound too uncommon. I had similar issues in the past with some networks I've worked with that were resolved by moving the router actually to WPA2 or by updating the firmware. The ActionTec MI424WR Rev. F, G, and I require the use of WPA2 since they have Wireless N radios in them so WPA wouldn't be of much use. My old Linksys WRT54GX also had similar issues, but that was a result of the Wireless Radio dying along with a mix of newer hardware not playing nice with the old, no-longer-supported firmware. I retired that router, only to bring it back into service as a Wired router at a friend's home (shutting off Wireless and setting up another as an AP) which replaced an old BEFSX41 which didn't have enough power to handle his Cable connection.
Besides a few software bugs at play somewhere, there isn't much that could cause the wireless to slowly stop working like that. I would suggest moving back to WPA2. For the older Dell laptop if it's running Windows XP, make sure at least Service Pack 3 is installed if it hasn't been getting updated. Also, check for updated drivers for the Wireless card since they may be needed as well. A bit of searching on the Wireless card should also indicate whether or not it supports WPA2 encryption. Anything from the mid-2000s should support it.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Serious performance problems after updating from 10.5.6 to 10.5.7

I've got a Macbook Pro C2D 15" (late 2006). After updating the system from 10.5.6 to 10.5.7 and quicktime to 7.6.2, I experience serious performance problems which I have never seen before:
-From time to time, kernel_task has peaks in activity monitor (consumes a lot of CPU). In that moment, the mouse hangs for a short moment and audio playback is distorted/has drop outs.
-Recording audio consumes a lot of CPU (independent of the audio application).
-Video playback consumes a lot of CPU, regardless if I use VLC or the quicktime player.
Any idea what could be done? Thanks in advance.

After a few days of using CoolBook I report that my 1st generation MacBook Air is now reliable and never overheating, regardless of environment conditions.
I must point out that I do believe that it really is something new in 10.5.7 that is causing this problem as my environmental conditions have not changed and even Summer in Dublin still sees temperatures no more than 72F/22C. I am now in Madrid, where the environment is quite different, and I am still having no problem with kernel_task spinning.
I plan on reporting my problem to Apple anyway and being aggressive about the issue as MacLovinRanga did in this thread (http://discussions.apple.com/thread.jspa?messageID=9647353#9647353). Perhaps many/all of those of us having this problem will obtain new MacBook Airs.
Joe Kiniry

EPSI Dashboard problem after moving from reporting services 2005 to 2012

I have created a Dashboard with Allscripts EPSI with a Reporting Services Report. After we changed from Micrsosoft Reporting Services 2005 to 2012, the report now gets cut in half. I turned a ticket in to Allscripts and they said that it had
nothing to do with their software, that it had something to do with a setting on our Reporting Services server. Please point me into the right direction.

Hi Jason,
Based on my understanding, after you move the report from Reporting Services 2005 to Reporting Services 2012, the report can’t display well.
In Reporting Services, upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file. In your scenario, if the .rdl file isn’t upgraded in the new environment, it’s expected that the report won’t display well. So please
open an .rdl file in Report Designer in SQL Server Data Tools (SSDT) within the new environment, then the Report Designer will automatically create a backup file and upgrades the report to the current namespace. After a report is upgraded, you might notice
additional errors, warnings, and messages. This is the result of changes to the internal report object model and processing components, which cause messages to appear when underlying problems in the report are detected.
Reference:
Upgrade Reports
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

VISA GPIB problem after switchig from NT- W2000

Similar Messages

Maybe you are looking for