Visio 2010 on layer added/changed event

Hello!
Is it possible to
get event of add/change
layer in Visio 2010 VBA?
I have not found such an event in EventList.
Sergey

Hi Sergey,
Please see the article below and check if it is helpful:
https://msdn.microsoft.com/en-us/library/office/ff768306.aspx
More reference:
https://msdn.microsoft.com/en-us/library/office/ff758690(v=office.14).aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

[svn:osmf:] 14474: Adding a 'dispatchInitialChangeEvent' parameter to the ' watch' method in order to allow the initial change event from being dispatched, continued.

Revision: 14474
Revision: 14474
Author:   [email protected]
Date:     2010-02-28 23:53:31 -0800 (Sun, 28 Feb 2010)
Log Message:
Adding a 'dispatchInitialChangeEvent' parameter to the 'watch' method in order to allow the initial change event from being dispatched, continued.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataWatcher.as

*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.

[svn:osmf:] 14473: Adding a 'dispatchInitialChangeEvent' parameter to the ' watch' method in order to allow the initial change event from being dispatched.

Revision: 14473
Revision: 14473
Author:   [email protected]
Date:     2010-02-28 23:45:28 -0800 (Sun, 28 Feb 2010)
Log Message:
Adding a 'dispatchInitialChangeEvent' parameter to the 'watch' method in order to allow the initial change event from being dispatched.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataWatcher.as

Perhaps you're not handling the "EndOfStreamEvent" correctly/at all, and thus not freeing up the socket to listen for the "NewReceiveStreamEvent " after the initial stream has ended...
?

Changes from Visio 2010 to 2013 - highlighting entire line drawing document with text fields and changing line colors

I work with very large visio drawings that are basically line drawings (network drawings) with text boxes indicating equipment location. We work in future and current drawings, future has colored lines indicating connection type and objects have text in
them that indicate if they are new by having red text. Current drawings have all black lines and black text.
Here's my dilemma, previously I would Ctrl+A and then change all text and all lines to black in Visio 2010, everything would change no problem. In Visio 2013 every text box now get's a black border around it, I've tried selecting all text boxes at once
and trying to remove the line but no luck.
These drawings are HUGE and it takes me a good hour just to change between future and current where previously it took me seconds. I have many coworkers and we're all experiencing he same issue with the move to 2013.
Is there a macro or some vb script I can utilize to select all text boxes and remove the black outline?
Hope you can help!

try this macro
Sub Simple()
Dim sh As Shape, counter As Integer
ActiveWindow.SelectAll
For counter = 1 To ActiveWindow.Selection.Count
Set sh = ActiveWindow.Selection(counter)
If Len(sh.Text) > 0 Then sh.Cells("Geometry1.Noline").FormulaU = "IF(LEN(SHAPETEXT(TheText))>0,1,0)"
Next
MsgBox "All text borders set invisible"
End Sub
if in your drawings you have only lines and text label (NOT rectangles, circles and other shapesconteined text for example) this macro can help !

Unable to edit .vsdx visio file that is inside a document library using visio 2010 sp2

I have Visio 2010 SP2 installed locally inside my machine. The current version can open vsdx files by doing some conversions. I got the following scenario inside my SharePoint server 2013:-
Currently I have Visio file (with .vsdx extension) uploaded to my SharePoint 2013 document library.
If I click on the Visio file I got the following dialog.
I select “Edit”, click on ok.
Then the visio 2010 application will convert the current file and open it locally inside my machine.
But the opened file will have it name as “Copy (1) of ….”, as follow:-
So if I do some changes to the Visio file and I click on save I will not be able to save my changes back to the SharePoint server’s document library. Now if I do the same steps for a .vsd file not .vsdx then I can directly open the Visio file (without any
conversion process) and I will be able to save my changes back to SharePoint server.
So can anyone advice how to be able to edit .vsdx files which are uploaded to SharePoint document library using visio 2010 SP2 ?
Thanks

Thank you for your ideas.
After that last posting, but before your response, I asked them to add the local farm to their trusted sites zone. Several blogs I had encountered while searching had listed that as something they had tried.
As soon as they added the site to their trusted site zone, the problems went away.
It was definitely not all users - I only had 2 people directly contact me about the issue.
I never got a chance to ask them about other SharePoint sites - they were working on the sites where they spent most of their time - I don't know if they had other sites.
The old location and the new location of these 2 sites are in the same site collection - it was moving them from
http://myfarm/sites/div/dept67/site1
to
http://myfarm/sites/div/dept64/site1
basically (with the actual names changed to protect my job).
The site collection is /sites/div . So the site collection features are the same.
I suppose that the site features could have changed between the export and the import - but since things are working now and I didn't change any features, I don't think that it is.
At this point, things appear to be working. However strange that seems to me.

Contextual Event question (Currency Change Event)

Hello,
I have published a contextual event on my table (Currency Change Event)
I also have a SelectionListener on the same table.
Will I have to manually/programmatically publish the event within the selection listener code? (and if so, how?)
The reason I ask is that I practiced with a small app containing a region from an ADF library that handled currency change event from the referenced task flow and everything was great, but now I am trying to apply the same principles to my "proper" application and there is no currency change event being received in the parent application.
I had a look at Andrejus example (http://andrejusb.blogspot.co.uk/2010/10/contextual-events-framework-and-adf-11g.html) but he has hand crafted the events on the page binding will I have to do that too? Is it not enough that I have the currency change event declared?
Any help appreciated, thanks
JDeveloper 11.1.2.2

I've applied the same processing to another table that uses the standard collectionModel.makeCurrent selection listener and it's firing the contextual event handler in the parent application, so that almost confirms that it's the bespoke selection listener that needs code adding to it to invoke the currency change event
edit :
I added this code to invoke the makeCurrent and everything is ok again, thanks for listening
FacesContext fc = FacesContext.getCurrentInstance();
ELContext elContext = fc.getELContext();
ExpressionFactory ef =
fc.getApplication().getExpressionFactory();
MethodExpression meth = ef.createMethodExpression(elContext, "#{bindings.partnersVO1.collectionModel.makeCurrent}", Object.class, new Class[]{SelectionEvent.class});
meth.invoke(elContext, new Object[]{selectionEvent});

[svn:osmf:] 14801: Fixed proxied elements not getting container change events.

Revision: 14801
Revision: 14801
Author:   [email protected]
Date:     2010-03-16 17:05:06 -0700 (Tue, 16 Mar 2010)
Log Message:
Fixed proxied elements not getting container change events. Fixed NPE encountered when testing surrounding null proxiedElements.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/LoadFromDocumentElement.as
    osmf/trunk/framework/OSMF/org/osmf/elements/ProxyElement.as
    osmf/trunk/framework/OSMF/org/osmf/elements/proxyClasses/ProxyMetadata.as

Sorry about that. I am not exactly sure where the problem is, but I know it takes place after I put the <nav> in (in the html portion). If I understand what I am learning, the CSS at the top will structure my html code so I would have thought the CSS tageting my nav would be the focus. Maybe it is a different section though.
CSS part:
nav p {
font-size: 90%;
color: #FFC;
text-align: right;
font-weight: bold;
background-color: #090;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-top-width: 2px;
border-top-style: solid;
border-top-color: #060;
HTML part: (bold italic is the part I added)
<body>
<div class="container">
<div id="apDiv1"><img src="Lessons/images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
<header></header>
<nav>
    <p>Home | About Us | Contact Us</p>
</nav>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="#">Green News</a></li>
      <li><a href="#">Green Products</a></li>
      <li><a href="#">Green Events</a></li>
      <li><a href="#">Green Travel</a></li>
      <li><a href="#">Green Tips</a></li>
    </ul>

Adobe PDFMaker doesn't convert layers from Visio 2010

I'm wondering if anybody else is seeing this behavior after converting to Visio 2010...
I have a Visio cross-functional flowchart (CFF,) using "swimlanes." My shapes in this flowchart are organized into various layers withinin Visio. When I convert to .pdf, the pdf document displays the layers (along with the "eyeball" for selecting & deselecting layers,) but the layers do not "hide" when you deselect them.
This problem occurs when using Adobe Acrobat Pro version 8,9, or X. The problem occurs no matter which .pdf converter I use, and it makes no difference whether I initiate the conversion from within visio or externally. The problem occurs in documents built from scratch in 2010, and in documents converted from version 2007.
Interestingly, the problem only occurs when the Visio document is a CFF with swimlanes. Without swimlanes, all layers can be properly hidden & unhidden in the .pdf.
Can anybody out there successfully display&hide layers in their .pdf generated from a Visio 2010 CFF? Thanks for any thoughts! : - )

I had the same problem today using Visio 2010 & Acrobat Pro X, but having used Vision layers before, I did the following:
copied the shapes from the CFF without the frame onto a new blank vsd
the layer properties transferred normally with them
& discovered that:
the layers could be exported to pdf using the Acrobat Create option (check the preferences first)
all of the layer settings worked fine.
I then transferred the CFF "frame" (with swimlanes) onto the new vsd
the layers seemed to export ok
NONE of the layer settings worked in the pdf.....
The only workaround would be to manually create the frame with rectangles on the copied shapes....
I added these to their own "swimlane" layer & the whole export & result worked fine.

Issue in execution of Dynamic action on change event

Hi,
Greetings.
I have scenario, where I have one select list (P_CATEGORY) and one shuttle control (P_ROOMS) on page.
The values of the shuttle list is being populated based on the selected value in select list.
The left pane of shuttle control's value based on LOV and source of the shuttle item is a plsql function, which returning colon separated value list.
So that returned values shown in the right pane of shuttle.
The LOV values are getting being populated using cascading LOV i.e based on the of Select List item. But the Shuttle source values not getting auto refresh and for achieving that I've created a dynamic true action on change event of Select list.
The dynamic action is with :
Action : Set Value
Set Type : PL SQL funciton body
Page items to submit : P_CATEGORY (this is select list)
Escape Special Character : Yes
Suppress Change event : Yes
Affected Elements -
Selection type : Item(s)
Item(s) : P_ROOMS
This is perfectly working on Firefox but not working on IE9 & Google Chrome.
I've debugged in both IE9 & Google chrome and found the dynamic action get executes ajax call and the values get back but not rendering on the screen. i.e not assigning to the item.
So can you please advice me what will be a workaround for this issue?
I am using Application Express 4.1.0.00.32 .
I'll appreciate your prompt response.
Thanks & Regards,
Jaydipsinh Raulji

I don't understand why this is not working withouth seeing an example, there might be multiple processes working on the item.
Anyway if the value is returned check if the value is in the session aswell. If it is in the session but not on the page that means you will need to find a way to bring it from the DB to the page. You can do this by adding an action to your DA:
Action: Execute PL/SQL code
PL/SQL code: NULL;
Page Items to Return: your shuttle item

Dynamic Action, validation check, on an Item, could not use Change event

I am learning how to use Dynamic Actions in a 3.2.x app that was upgraded to 4.0.x. I wanted to share what I learned adding client side validation with these actions. Perhaps an Apex guru could suggest an easier method to use this feature.
I have an existing function where a user selects multiple rows in a report page, and then assigns a single status and enters justification text for the selected rows in another page, then saves changes (via submit).
One item, justification, is required. I replaced my JavaScript validation of an empty value, e.g., P10_JUSTIFICATION.value, with a dynamic action. The Change event was a candidate for this item, with the "is not null" Condition. However, it is possible to initiate this screen to review the status, overlook the justification text and immediately select a button to save changes. No Change event has fired. The Before Page Submit event was applicable here. This Event selection in the wizard does not provide the Item for definition and then the Condition wasn't the right context though available for selection. I selected JavaScript expression for the Condition, actually entered my original JS test expression, and created one True Action. The True action displays an Alert to tell the user that required text is missing.
Test of this DA was not completely successful. The alert appeared but the page went on to submit anyway. I found I had to add another True Action, Cancel Event, to stop the submit. The DA was then successful.
The Apex site examples, [http://st-curriculum.oracle.com/obe/db/apex/r40/apexdynactions/apexdynactions_ll.htm] , do a great job showing use of Change and Set Value events for Items but a user may not always navigate through items. These features were promoted for developers with no to little knowledge of JavaScript to use Apex for application development. This DA required using/understanding JS anyways.
My next step is to implement actions on a tabular form that that has required values. It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector). I have already found that tabular form columns can be re-ordered from v3.2.1 to 4.0.x. I was hoping I could declare dynamic actions or simpler Javascript methods that would not rely on f0x array references.
Thanks,
Kelly

It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector).Not necessarily. One possibility is to use descendent jQuery selectors to attach the dynamic action event handler by column heading:
td[headers="HIREDATE"] input

I can't change events in iCal 5.0.

On my MacBook OS X 10.7.1, I can't make any manual changes to iCal events. When trying to edit an event, any typed change is temporary and the calendar reverts to its previous data right before my eyes. Seems as though iCal can't write or save my changes! Can I delete iCal and re-install it, hopefully resetting any files & permissions to their correct settings?

Hi John,
Thanks for the tip. I created a new "temp" account with system manager/administrator privileges like my MacBook account (with which iCal doesn't work), and tried syncing the calendar from my iPhone to this temp account. I merged the calendar data and successfully added/deleted events on the calendar, both from the MacBook and my iPhone.
So iCal works OK with a new user account, but not with my original account.
I'm pretty sure that I've messed up the permissions on the iCal files associated with my original account, thus causing the problem. I was moving files from my PC to the public folder on the MacBook over the wireless network when I discovered that the files I'd moved to the public folder couldn't be opened or modified because the permissions were insufficient. When I tried to assign read/write permissions to these files on my original account, I must have also clobbered the permissions of the iCal files! (Any advice you have on this issue would also be appreciated!)
Can you tell me how to re-assign the proper permissions to the iCal files for my original account? Where are these files?
Thanks for your help - Tom

Dynamic action on File browse change event

Hi Experts,
apex version 4.1
This is what i'm trying to do..
i have a file browse control and a text field. when user selects a file, selected fiel's name (without file type extension) should be set to text field.
I tried adding a dynamic action to file browse control's change event and within pl/sql Set Value logic i queried the wwv_flow_files and tried to return the file name it didn't work. i got no data found error. i assumed file is being inserted into wwv_flow_files when a page submission happens.
In my second approach within the SetValue pl/sql logic i got the file browser control's (by directly accessing field, not by querying wwv_flow_files)value and did some string manipulation and tried to return only the file name. yet i got the same no data found error.
Any idea how can i implement this ?
Thanks in advance.
- kurubaran

Hi,
I think PL/SQL approach will not work before you submit data to database.
Have you think use $v function to get value from file browser?
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/javascript_api.htm#BGBGDGIH
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Visio 2010 Stardard install error on Windows 8.1 with Office Pro 2013 already installed

Both Visio and Office are 64bit. Visio gives "The language of this installation package is not supported by your system". Tried the LIS "CacheOnly" suggested on a few sites. Causes Installer boot segment fault. Any ideas? Suppose we have
to uninstall Office, install Visio, re-install office? Afraid that will jack up my activations count. Assuming the issue is newer Office is causing the problem.

Hi,
For the error message, the issue may be caused by some reasons.
The Visio 2010 installation source was damaged.
The installation source for the language pack did not contain all the necessary files.
Please try the following methods:
1.Change an installation source.(Click
here to re-download)
2.Extract all sv-se files necessary for the language pack installation and installed the language pack successfully.
3.Unzip the installation source and double-click the setup.exe to install.
If we had tried the all above methods, we need to try that uninstall Office, install Visio, re-install office. It’s important to always install earlier versions of Office first.
http://office.microsoft.com/en-us/support/install-and-use-multiple-versions-of-office-on-the-same-pc-HA103981695.aspx
Regards,
George Zhao
TechNet Community Support

Problems creating a PDF from a large Visio (2010) document

Hello
Heres the setup, Windows 7, 64bit, Visio 2010 std, Adobe Acrobat X Standard, a 6.7mb .vsd file with a custom size of 6000 x 3000 mm that I want to convert to a pdf (not for printing)
Using File menu & save as in Visio converts to a pdf with great quality but cuts the page off, I've spent all day reading about the 200" issue and thats exactly where the cut off is.
Using right click on the .vsd file in explorer and convert to pdf opens the correct page size in the pdf but the drawing is screwed up, lines moved about, missing stuff etc.
I dont know
a) Why there is a difference between the 2 ways of creating the pdf
b) how to have my cake and eat it! Good quality and right size page
Unfortunately I cannot use any third party apps, am I screwed?
Thank you everyone for looking and maybe even offering advice
Cheers
Stu

I looked at every setting as I had the same problem. This is what I found resolved the issue:
1. Open Adobe Acrobat Reader and go to Edit/Preferences and change the pixel/inch ratio back to the standard.
2. In Visio, go to Design tab, Size, and then More Page Sizes, and change the page size to Custom (your needed size.) (This opens Page Setup.)
3. The printer paper size I could not change, but it didn't affect it.
The first option is what took me an hour to figure out. Hope this helps save people time.

Can I create an IDOC Based on A Change Event Being Triggered

I have a BOR object that when changed - triggers event 'Change'
I would like to code the event linkage such that an IDoc is created everytime the event is raised.
Has anyone done this before?
The message type I am using is a standard one and is associated with the same BOR object.
Which function module should I use in the event linkage for that 'change' event?
The IDoc doesnt have an outbound function module.
Please indicate steps or point me to related weblogs/threads
Thanks

Hi Anand,
What happens generally is that -- Initiator are created on the basis on the main role. User submit the request for main roles and the dependent roles are added automatically. Dependent roles are added later automatically the initiator needs to be created on the main roles. So if initiator is created on the basis of dependent role ( secondary roles ) and you are not selecing the dependent role in the request ( selecting only the main roles ) the initiator's conditions will not meet.
Kind Regards,
Srinivasan

Visio 2010 on layer added/changed event

Similar Messages

Maybe you are looking for