Visit the new EasyLink Advisor Forum

Visit the New Linksys EasyLink Advisor Community Forum to post comments, questions, and feedback specific to the new EasyLink Advisor software.
Linksys EasyLink Advisor (LELA) is a free application that provides an easy way to setup, view, manage, and repair your network. Most Linksys Wired and Wireless Home Routers are already supported in LELA including:
BEFSR41       BEFSR81       BEFW11S4
WRK54G        WRT300N       WRT54G
WRT54GC     WRT54GL       WRT54GS
WRT54GX     WRT54GX2     WRT54GX4
- If you already have a supported Linksys Router you can install LELA to run on your existing network. LELA will not change anything on your network, and you will be able to see a graphical view of all your networked devices.
- If you are setting up a new router, select the model from the list in the welcome screen and you will be guided through the steps required to quickly get your network up and running.
You can download LELA (for free) from http://www.linksys.com/lela
We hope you will enjoy using LELA , we welcome your comments, and we'll do our best to answer your questions on this forum.
The EasyLink Advisor Team

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it. If you have not done this since the last firmware upgrade, please do this now.
If you need more help, you will need to tell us more details of your problems.
Please state the model and version of your router.
Please state the make and exact model number of your modem.
Please state your ISP.
Also, describe exactly what is happening on your network when your system disconnects. Are all computers disconnected from the Intenet? Or only the wireless computers? What is running on the computers when your system crashes? a game? P2P software? other?
Also, please connect your computer directly to your modem. Verify that you can get a working Internet connection, then do the following:
Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key. Post your results.
Message Edited by toomanydonuts on 01-03-2008 11:48 PM
Message Edited by giantherockstar on 01-04-2008 06:51 AM

Similar Messages

Welcome to the New NI Discussion Forums!

We are excited to present the NEW and IMPROVED NI Discussion Forums to you, our valued community members!
The community not only had a face-lift, it now offers a full set of advanced personalization features and it is available in seven languages!
Here are some tips to help you get around the new system:
What do the boxes next to the user names mean?
This is the new user ranking system. The three boxes represent the user’s score in the three performance metrics: ratings, posts, and logins. The darker the box is shaded, the higher the user has scored in that performance metric.
The box on the left is the average message rating the user has received.
The box in the center is the total number of posts the user has contributed to the community.
The box on the right is the number of times the user has logged into the community.
The blue boxes designate the user is an NI Employee while the gold boxes are reserved for NI Partners and customers.
How do I find a thread from the old system in the new system?
If you have the title of the thread, we recommend searching for it using the search bar at the top or bottom of the page.
If you do not have the title of thread or cannot find it with search, but you know that you posted to the thread, we recommend that you login and click on your Alias at the top of the page to view your profile. From your profile page, click on the Find All Posts by this User link and scroll through the results to find the thread.
If you do not have the title of the thread and you didn’t post to it, but you know the Alias of someone else who did post to the thread, conduct a User search to find that user. Click on their Alias to view their profile page and then use the Find All Posts by this User link to find the thread.
If you do not have the title of the thread and you don’t know the Alias of any user who posted to it, we recommend browsing the board that you believe it would be in until you find it.
How do I personalize the forums?
Once you login, click on the My Profile link at the top of the page. From the tabs on this page, you can modify your time zone, ratings preference, font size, emoticon style, etc to personalize your experience. As long as you remember to Save Changes before you leave the tabs, your forum will be personalized for you each time you login.
What languages are supported?
The user interface is translated into the following languages:
Chinese (Simplified)
Chinese (Traditional)
English
French
Korean
Japanese
Spanish
Note: The language in the My Preferences tab in the forums only controls the language for that session. As soon as you logout and login again, your language will be reset to the language that you have configured in your NI User Profile. To modify the language configured in your NI User Profile, visit www.ni.com/profile.
What was migrated?
Questions
Answers
Comments
Average Ratings per Answer
Attachments
Alias
Number of Questions Posted (Total Started Threads)
Number of Answers & Comments Posted (Total Replies)
Average Ratings Received per User
Board Subscriptions
What was NOT migrated?
Topics
Opinions
Replies
Polls
Average Ratings Given
Message Subscriptions
Keywords associated with Board Subscriptions
Enthusiast Subscriptions
Enthusiast Biographies
What does Float mean?
You can choose to pin boards or threads to the top of the lists so that when you are logged in they are the first things you see. To do this, click on the up arrow to the right of the board or message you want to Float to the top of your lists. When you no longer want this message or board at the top of your lists, you can click the arrow again to UnFloat the board or message.
Why are there smiley faces in the sample code pieces?
There are times when the pieces of code include the same characters that are used to create an emoticon in the forums. To disable emoticons so that you can see the code correctly, follow these steps:
Sign In or Register to the forums if you are not already logged in
Click My Profile in the User Bar at the top of the page
Click My Preferences to view the My Preferences tab
Change the Emoticon Type to None in the My Preferences tab in your Profile
Click Save Changes
Now when you browse to the thread, the code should be displayed correctly.
Emoticons will no longer be displayed in any messages you view in the forums until you change the Emoticon Type back to one of the other types.
If you have additional questions or feedback about the upgrade, refer to the Help or post to the Feedback on NI Discussion Forums board.
Molly K
Web Support Manager
National InstrumentsMessage Edited by Support on 11-20-2004 06:14 AM
Molly K.
Web Support & Operations Manager
National Instruments

Just a couple of comments:
1. In the CVI forum, I couldn't post a message which included the C #include syntax with angle brackets. It interpreted the angle brakcets as HTML, gave me an HTML syntax error, and deleted the angle brackets as well as the .h file they enclosed. There may be a way in HTML to escape the angle brakcets so they can be included as text rather than interpreted as HTML, but I shouldn't have to do that in a C forum.
2. When I got the HTML error message above, it also deleted the file I had attached so when I posted the message, there was no attachment.
3. I don't get automatic hyperlinks in any posts I read or create. The text of the URL is there, but I can't just click to link to the new page. Am I missing some option?
4. Older but updated messages don't come to the top. I like to see new activity even if I'm not subscribed to that thread.
5. When reviewing the list of messages in the forums, I'd like to see the ratings of the author and of the reply (even before opening the message). In the old forums, the messages where tagged "Answered by Enthusiast" and/or "High rating".
6. I'd like to see the buttons to rate an answer even if I'm not logged. If I try to rate an answer when I'm not logged on, it could prompt me to log on first. If the rating buttons are only available if you're logged on, I think the number of ratings will be drastically reduced.
7. I miss the list of top contributors (formerly known as Enthusiasts). I think it was a good way to foster community and to get to know active members. It also generated some friendly competition to see who had more posts and who had higher ratings.
8. I liked the old organization with two sections to show the newest answered questions separate from the newest unanswered questions.
9. Some of the new search options are good additions. I'd like to combine the user search and the message search. For example, I might like to search for any message from Bilal on DLLs.
10. I had to make this a Top 10 list. I'm impressed by the amount of work that went into the new forums. Keep it up!

Exchange 2010, UCC SSL, and the "new" CA/BROWSER Forum not issuing for .local

I don't know how many people have run into this yet, but the CA/BROSWER Forum, the "standards" authority for SSL issuing, has mandated that CA's can no longer issue a certificate using a FQDN "intranet" name for new or renewal SSL certificates effective
Nov 1, 2012. i.e. the Microsoft standard of mydomain.local will no longer be accepted as a SAN on a UCC for Exchange 2010. I've looked thru the KBs and Social forums, but haven't really found any guidance on how to solve this. I'm presuming
that the certs will have to be split and the "external" domain name of server.mydomain.net will just become a single server SSL, and the internal name of server.mydomain.local will become a Self-Signed certificate. With the increasing prevalence of OA
and ActiveSync devices, is there any baseline guidance yet on how to make this happen without completely fouling up production servers and killing access to the user community?

On the same topic, though likely different environment...
Against recommended deployment, I have a number of clients running all their services on one box. Windows Server 2008, Active Directoy, DNS, Exchange 2010 ...and so on. These servers all have .local addresses, which means of course that the SAN
certificates have .local addresses as one of the SANs.
I've read alot online about this issue, and am trying to find the most cost effective solution to switch numerous production servers running this configuration.
The best solution I've come up with so far is...
1. Virtual AD with new external domain, 2. Migrate Exchange CAS to this domain, 3. Reconfigure network through the box.
Obviously these steps will contain alot more details, but this is just the outline atm. At best, I see me having to take a second box with me to each location to perform these steps, and I can't see it happening without disruption to the work flow
of employees.
Thankfully, all of these businesses are relatively smal...under 25 employees. Still, I'd like to find the smoothest transition solution possible.
Any suggestions would be greatly appreciated!
Regards

Visit the New Linksys EasyLink Advisor

This router looses connections at LEAST once a day!! I upgraded the firmware (no better performance and disconnects still the same).
any suggestions?
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by giantherockstar on 01-03-2008 06:34 AM
Message Edited by giantherockstar on 01-04-2008 06:49 AM

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it. If you have not done this since the last firmware upgrade, please do this now.
If you need more help, you will need to tell us more details of your problems.
Please state the model and version of your router.
Please state the make and exact model number of your modem.
Please state your ISP.
Also, describe exactly what is happening on your network when your system disconnects. Are all computers disconnected from the Intenet? Or only the wireless computers? What is running on the computers when your system crashes? a game? P2P software? other?
Also, please connect your computer directly to your modem. Verify that you can get a working Internet connection, then do the following:
Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key. Post your results.
Message Edited by toomanydonuts on 01-03-2008 11:48 PM
Message Edited by giantherockstar on 01-04-2008 06:51 AM

Lost in the new format of forum. Where are my bookmarks?

I am no able to get to see the places I replied and/or bookmarked (I think there was some such feature earlier that I used in the forum). My own cxontributions, I do see, but not sure if it is showing all of them . Anyone knows what happened to earlier bookmarks? "Why cant we be happy and settled with things working fine? Alas, that is what we belive to be progress."

Ha! the enite list as it used to look time ago. Found under "Content", agian in Profile page. Solved.
I do wonder, if people use these forums like fb to see, learn and forget. For me there are some posts/discussions that I need to "not forget" and keep returning. This is a forum, with very specific content, and that is why so many communities. One can be and more likely member of many communities. I personally am not the kind to liek the distraction of feeds when I am specifically looking for some answers and discuss very specific things. This forum is not a "news feed" for me (for some contributing expert I can still see that, but not for me). I "search", I "ask" and my learning sometimes need "bookmarking" - for example, color management area has given me great answers and discssions - it is serious knowledge - it is not fit to be seen as some fb feed!

Welcome to the new FrameMaker scripting forum

As FM10 now has built-in scripting via ExtendScript, this sub-forum was set up as a venue for discussions related to the ins and out of using ExtendScript.
As well, questions on FrameScript and FDK programming are welcome here.
If you missed the kick-off webinar on May 26th by Rick Quatro on FM10 & Extendscript, the slides and sample scripts are available on Rick's blog here:
http://frameautomation.com/2011/05/31/framemaker-10-extendscript-slides/

Hi!.
We have Portal 3.0.9.8.3 patch (over 9ias 1.0.2.2.2a Minimal edition) and... a lot of problems about performance. We4ve oracle 9i(repository) running in another server,NT PIII 512MB RAM.
I4m getting the following errors:
1) portlet could not be contacted
2) Timeout occurred whilst retrieving page meta data
3) timeout for content....
I had increase the timeout's params...but without success.
It seems that DB process takes a lot!!!
Sometimes, after the third "refresh", I get the rigth page.
What4s happening??
I must to use 3.0.9.8.2 patch??
thanks,
Adrian.

Visit the new TimesTen Blog for interesting articles on TimesTen

One of my colleagues here at Oracle has started a TimesTen blog. He is one of the architects in the development team and has been working on TimesTen even longer than I have (around 15 years now I believe). I recommend anyone interested in TimesTen to pay it a visit. If anyone has requests for articles on specific topics, please let us know.
The blog can be found here: http://blogs.oracle.com/timesten/
Chris

Hi Chris,
Finally, I thought this never happened :)
Regards,
Gennady

The new forums

Hi all,
I don't know if it is just me . But I didn't like the new interface of forums.
Each threads appear big to me and 15 threads will fill up one page.
Of course, I can click on 'Load more Items' button and see more threads but threads appear big in an unfriendlier way.
Maybe I'll get used to it.
I don't see the preview button (to preview the content before posting).
Is there an option to switch to the old 'Classic View' as we get in Gmail and Yahoo ?
How do I reward the volunteer who gave the correct answer ? And how do i mark a reply 'Helpful' ?
On the plus side:
I liked the design of the top section filled with red with 'OTN Community' written on it.
More formatting options

Regarding the threads appearing big issue. I think you are in 'Overview' tab. Choose 'Content' tab ; the next one on the right and you'll get a more friendlier interface than earlier one.
How do I reward the volunteer who gave the correct answer ? And how do i mark a reply 'Helpful' ?
The same options still exist.

Still no full retina support, even with the new CC Apps?

Hello over there!
I just bought the full CC abo, after trying PS and Indesign and becoming a fan of the new workflow, that is possible with the upcoming new CC Apps (Muse, Edge Tools...).
Now, after getting things right and downloading the needed Apps to my Macbook Pro (15" Retina) - I was very disappointed. The updated CC version of Dreamweaver and even some of the completely new Apps still have blurry text fields and buttons/layout graphics in it. Acrobat Pro XI is still a laggy, blurry fail on retina. The Mac OS Preview is sharp and scrolls a 600 pages PDF in seconds.
I mean... Srsly? This would be okay if the retina MBP came out last month. But it came last year. I'm really a big fan of the Adobe workflow and functionality, this is why I upgraded and decided to spend some hundreds of dollars for it ( and become friends with the new and scary rent model ). But the best program is a pain, when your eyes start being overly stressed after 20 minutes of work, especially when you're already looking at hundres of code lines (And I'm 21 years old, so I'm glad to still have those good working eyes..). I remember when I fell totally in love with Dreamweaver because it was able to handle the amount of information in a good stucturized and clearly visible way. But the only really sharp and "look like it fits all together"-Apps are PS, AI and ID as far as I tried for now.
Definitely affected are: DW, Muse, Edge Animate and Reflow (What? They are new!?)
So, thats my question: Are there any official statements that this will be fixed? Im confused because Adobe is just partying about the retina-compatibility updates last fall/winter in blogs and descriptions. The blurry App elements are not mentioned. I really want to know this, to be able to take back my contract and abo in time and get a refund. Would be sad, but the only option to me.
Thanks very much for reading and helping in advance. I really do not want to troll or sound agressive. The Adobe Suite is a very very big product and it does very good. But I'm simply disappointed about the handling of retina support, which is essential for users like me.
English is not my main language, I hope everything was clear.
Best regards,
D. Fuchs

Hi David,
thank you for your effort. If I remember correctly you said you’ll also hand through this issue/question to the tech guys. Does this mean I’ll get further information? Because this article you found is about 10 month old and I’d like to get this issue verified.
Furthermore, Acrobat (XI) is not even mentioned in that article and this is what brings the most problems.
I really don’t like to be a stressing customer, but I think a official answer to this issue is definitely possible und should be made.
I’ll attach a few hardcopy pictures of the issue. Don’t know if it helps, but it proofs.
Thanks again and best regards,
D. Fuchs
Am 25.06.2013 um 01:17 schrieb David__B <[email protected]>:
Re: Still no full retina support, even with the new CC Apps?
created by David__B in Adobe Creative Cloud - View the full discussion
Hi D.
I found this http://blogs.adobe.com/creativelayer/new-macbook-pro-retina-display-su pport/
I believe has been added to Photoshop, Illustrator and Lightroom so far. Hopefully it will be added to Dreamweaver soon too.
Kind regards,
-Dave
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5445698#5445698
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5445698#5445698
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5445698#5445698. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go tohttp://forums.adobe.com/message/2936746#2936746.

Premiere Pro CC and the New Mac Pro (2014)

I'm expecting delivery soon of a new Mac Pro, nicely loaded, which I purchased mainly because of all the work I do with video. Yet, I read in a review that Adobe Premiere Pro isn't optimized to take advantage of the new Mac Pro, won't run faster, and I'm better off using Apple's Final Cut.
1. Is this true?; and
2. If so, will Premiere Pro be updated any time soon to run best on a 2014 Mac Pro?
My new Mac Pro will have the following configuration:
3.5GHz 6-core with 12MB of L3 cache
32GB (4x8GB) of 1866MHz DDR3 ECC
1TB PCIe-based flash storage
Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each

My main problem is that when i export using gpu open gl it crashes hard boot the mac pro. A 3 min timeline with 4k footage n a bunch of color grading. I get lucky if the timeline is shorter. But i think it is a gpu issue n my mac must be fixed. Currently under apple tech support. N my case is unique. No one has had the same issue and that makes it harder for me to figure the isse and to apple figure the issue.
If i export using software only mercury then the export goes smoothe no mattrr how long. But that defeata the point of owning a mac pro with 2 GPUs
Enviado desde mi iPhone
El 29/03/2014, a las 01:51 p.m., BanksMeador <[email protected]> escribió:
Re: Premiere Pro CC and the New Mac Pro (2014)
created by BanksMeador in Premiere Pro - View the full discussion
I have had my 12 core 2014 Mac Pro for a couple of weeks now, and I'm not very impressed with Premiere CC performance with 4K R3D on a 1920 x 1080 timeline.
I understand that there may be an update soon that will take adantage of the CPU's and GPU's when it comes to the complex task of de-bayering the R3D footage, but it's just not there now.
I get similar playback performance to what I experienced on my 09 Mac Pro tower.
Any insights on getting better playback performance in this scenario would be greatly appreciated.
Thanks!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6253414#6253414
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6253414#6253414
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6253414#6253414. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why doesn't the new flash player I downloaded work on my mac?

Hi,
I download the last new flash player on my mac under Lion and I can't open some website like adobe websites

Hi Sunil,
I try http://www.adobe.com/software/flash/about/ and the file attach is the result: a white page.
I uninstall it yesterday and download the last version on adobe
it's on firefox, I can use safari but I need to reload many time to have something
Le 27 sept. 2011 à 13:09, Sunil_Bhaskaran a écrit :
Re: Why doesn't the new flash player I downloaded work on my mac?
created by Sunil_Bhaskaran in Flash Player - View the full discussion
After downloading, you need to run the installer.
Could you please visit this site: http://www.adobe.com/software/flash/about/
If Flash Player is installed in your machine, it will give you the version number.
In the following link, you have step-by-step instructions on installing Flash Player on Mac:
http://kb2.adobe.com/cps/908/cpsid_90893.html
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3940045#3940045
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3940045#3940045. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have a new computer am trying to install photoshop elements 5.0 on the new machine need reg-id

how cab I find my registration id... I have the cd and the booklet, but not the original case... is it viewable in the old machine?

Jeff, Thanks for the reply. I don't have proof of purchase.. all I kept was the two cd's and the instruction book.I bought it in June of 2008, and don't think I have bank records that far back.I was hoping I could get the information from my installed copy.. there a long number on the bottom rightwhen I open it, but that didn't work and a number etched on the back of the cd... but it too didn't work....
Date: Tue, 29 Nov 2011 17:55:13 -0700
From: [email protected]
To: [email protected]
Subject: I have a new computer am trying to install photoshop elements 5.0 on the new machine need reg-id
    Re: I have a new computer am trying to install photoshop elements 5.0 on the new machine need reg-id
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
It is not viewable on your old computer. We may be able to get you a replacement serial number. Do you still have your proof of purchase for Photoshop Elements 5?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4053519#4053519
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4053519#4053519. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Installation of the new adobe muse version fails

Why does the installation of the new adobe muse version fail all the time? What is the problem?

Thanks for your help!
And have a great New Year...
Am 26.12.2012 um 18:00 schrieb Jeff A Wright:
Re: Installation of the new adobe muse version fails
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Please uninstall your current installation of Adobe Muse from Applications/Utilities/Adobe Installers. Once the software is removed please reinstall from https://creative.adobe.com/. You can find details on how to install the application at http://forums.adobe.com/message/4396277#4396277?tstart=0.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4945562#4945562
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4945562#4945562
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4945562#4945562. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Mit freundlichem Gruß.
Uta Guións
Basics of Communication | Uta Guións
Dipl. Kommunikationsdesignerin (FH)
Schälzigweg 77 | 68723 Schwetzingen
www.basicsof.com | Tl. +49 6202 16413
mobil +49 171 3860490
Der Inhalt der E-Mail ist nur rechtsverbindlich, wenn er unsererseits durch einen Brief entsprechend bestaetigt wird. Aussagen gegenueber dem Adressaten unterliegen den Regelungen des zugrunde liegenden Angebotes bzw. Auftrags, insbesondere den allgemeinen Auftragsbedingungen und der individuellen Haftungsvereinbarungen. Der Inhalt dieser E-Mail ist vertraulich und aussschliesslich fuer den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, so beachten Sie bitte, dass jede Form der Kenntnisnahme, Veroeffentlichung, Vervielfaeltigung oder Weitergabe des Inhalts dieser E-Mail unzulaessig ist. Wir bitten Sie, sich in diesem Fall mit dem Absender der E-Mail in Verbindung zusetzen.

Easylink advisor link or software needed please help me

i need the software for the linksys easylink advisor for the router wrt54gs version 6. i have 2 computers at my house and the one that had all my router information officially broke ( i saw it coming it was 10 years old and i did not take care of it well) i disconnect my ps3 from my house and took it elsewhere and now that im back i cant reconnect it to my router its frustrating and lapotops cant be used either because i dont know my WEP code please if anyone would liket o giv me a link to the software for the easylink advisor for my router and version that would be tremendous and i would greatly appreciate it.

http://update.linksys.com/lela/install/lela.exe
From Chris
Linksys Wireless-G WAG54GS ADSL Gateway
Newlink Wireless 11g 54Mbps PCI card worked with Windows 7 64-bit

The NEW Community VCDX Mentoring Process!

Fellow Community Members,
I am proud to provide a much-needed update on what has become known as “VCDX Mentoring”. Many people have come to Karl and I asking about being assigned a mentor. After much consideration, feedback, and discussions with the new VCDX Advisors, we have decided to do something a little different. We believe the mentoring program will be more fluid, adaptable, and successful if it is managed by you, the community, rather than owned and controlled by VMware. This is intended to help mentor you through the VCDX Defense Process assuming you have already completed your VCAP/VCIX Test Pre-Requisites. It's entirely up to the mentor, but this is what we've recommended to them.
Why the change?
Mentoring is a personal relationship, initiated and developed by one individual asking another to be their mentor. It’s not something that should be “assigned”.
The two people involved (mentor and "mentee") can ultimately foster the relationship as they determine best.
The VCDX program leaders can focus VMware resources more on the strategy and execution of the program’s success and growth.
Who are the available Mentors?
We will provide a list of VCDX holders who have volunteered to help out as mentors. This is something they are doing on their own time, and they will ultimately decide who and how many people they can mentor. You can find the up to date mentors on the NEW VCDX Directory using the "Mentor" flag.
VCDX holders interested in volunteering their time as a mentor can be added to the list simply by enabling the check box on their profile through the new directory's self service option. There is NO TIME limit on when current VCDX's can sign up to be a mentor. I want to thank those that have already stepped up to be a volunteer prior to this announcement. Each of the volunteers have agreed to follow some very basic Mentoring Guidelines.
UPDATED Note: It has always been stated in the Panelist Code of Conduct than panelists are not available as mentors. This is also documented in the Mentoring Guidelines above. However, we are looking into a possible change to the policy whereas "retired" panelists after a certain time may become eligible to be mentors. However, until that time any and all previous and current panelists are identified in the directory and cannot enable the self service tag to be mentor. We hope to have more on this in the coming months now that the directory is live.
How does having a Mentor help?
All mentors have been through this process. They understand what you will experience and the work involved. They have been given some basic guidelines as to what they should and should not be doing as mentors, as well as “Mentoring 101” materials to help them. Having a mentor is having someone to guide you; they are not there to do it for you. It’s entirely up to the mentor to provide the level of guidance they feel is appropriate.
How do I get a mentor?
That’s 100% up to you! You simply need to look at the New VCDX Directory, filter for mentors, and decide whom YOU think you might connect with best. The relationship between you and the person you are asking for help is very personal. Maybe you know someone on the list, maybe you greatly respect someone on the list. Drop them an email and start the discussions!
We hope this will grow on its own through the community. We will make sure the list of available mentor volunteers stays updated. We will also post new mentoring resources as they become available that will help the mentor and in turn help you. Outside of that, it’s between you and your new mentor to decide what works best to help you succeed.

Since the new VCDX Directory is now live with the 'Mentor" flag available, we'd like to ensure that everyone signed up on the previous spreadsheet is tagged as a mentor. Going forward that is going to be the system of record and we will retire the sign up form and spreadsheet.

Visit the new EasyLink Advisor Forum

Similar Messages

Maybe you are looking for