Vista users can't connect to 10.5.6 Server

Hello world...
I have a problem connecting users running Vista to Mac OSX Server 10.5.6; I've done a search here but I didn't find anything useful.
When Vista try to connect to the server with a valid username/password it is rejected, but if I try to connect from a XP client it connects without any problem.
Anyone can help me?
Thank you
Stefano

If you don't want extensive details around Microsoft Windows variants and offerings, please stop reading now.
Microsoft Windows XP has (had?) Home, Professional, Media Center Edition, Tablet PC Edition, Professional x64 Edition, and the Windows Vista flavors include (included?) Starter, Home Basic, Home Premium, Business, Ultimate and Enterprise Edition, and the Windows Server 2003 variant has (had?) 32-bit, 64-bit x64, and 64-bit Intel Itanium variants, and has (had?) Web, Standard, Enterprise and Datacenter editions.
Caveats: The Microsoft product offerings list has very likely changed since I researched this particular list of Windows offerings a year or two back. Some packages that I suspect are no longer offered include Windows XP 64-bit for Itanium, and probably some others. There are cases where the names of the various Windows editions have changed, as well. These Windows editions can and often do vary in capability and platform support, and in regional availability. And I haven't been looking at the MS-DOS-descended platforms; only at the NT descendants.
Not all of these Windows variants have the secpol.msc tool. AFAIK, the Windows XP Home and Windows Vista Starter and the Home variants do not. I'm not sure about Windows XP 64-bit for Itanium as I wasn't running that for very long; that was probably the Professional variant, so it would have had the secpol.msc tool.
When presented with the basic "I can't connect to CIFS/SMB/Samba share or a NAS device" problem report, I usually edit the registry key for the user. That tends to works on more of the variants than the secpol.msc tool. But both are valid approaches.
Please check with Microsoft for the current Windows product offerings, features and related details. And for the correct means for adjusting NTLM authentication. In particular, do read the Microsoft knowledge base articles including [KB954387|http://support.microsoft.com/kb/954387], and various others.
Now if y'all will excuse me, it is time to go debug some Cocoa code.

Similar Messages

  • WinXP AD users can't connect via SMB

    Server is an Intel Xserve, 10.5.8.
    Windows users get authentication errors when attempting to connect via SMB on the Mac server. The server is bound to Active Directory, and the Mac users are able to connect via AFP just fine. Macs also cannot connect via SMB. I get the error message "NTSTATUS_WRONGPASSWORD" when the user attempts to log in.
    Local users are able to connect via SMB, but I don't want to re-enter a dozen or so PC users on this server if I can avoid it.
    In the /var/db/smb.conf file there is an entry for a password server that may not be correct, but if I change it to the password server I've been instructed to use, the file flips back to the original setting when I stop and start the SMB service. I think if I make changes to the /etc/smb.conf file outside the END section, where the comments say to make changes, they will carry over to /var/db/smb.conf, but I'm not sure of the syntax.
    If you need me to post the testparm output I can do that.

    You're going to have to look into potential underlying issues.
    I don't know what's happened for you, but I have an identical type setup for a client done over a year ago and no such problems have occurred.
    What does the UNEDITED (please !) result of (using the Terminal) the following show:
    cat /Library/Preferences/edu.mit.Kerberos
    What happens when a user can't connect (error message, loginwindow shake) ? Are all client machines & the server using a common (eg internal) time-server ?
    Be sure to see http://docs.info.apple.com/article.html?artnum=300765
    And certainly read through Bombich' excellent PDF (click on the icon of it) at
    http://www.bombich.com/mactips/activedir.html - esp. the troubleshooting section
    for when a user is unable to login.
    Currently, I'm not able to check/verify the settings for any of the servers I've setup for clients in a "magic triangle" setting. I'm not certain about the "passwordserver" entry,
    on the one hand the actual passwordserver is actually part of

  • Can't connect to the modem's server.

    Hi guys, I have a major problem.
    When ever I connect to the internet with my modem, it works. But, when I connect to internet with my router and modem, I can't connect. But I have solved my problem by resetting both, my wireless router and modem. Then after I reconfigure my wireless router all I need to do is to log into my modem's server. But I can't connect to the modem's server. I tired logging in with "admin" (being the password) but I still can't connect to it.
    I am using: Verizon Broadband Network
                     Ultra RangePlus Wireless-N Broadband Router model: WRT160N
                     Westell modem model 6100
    What is the problem? Has anyone experienced this problem before?
    Message Edited by machg on 04-11-2009 07:10 PM
    Solved!
    Go to Solution.

    You will not be able to log  into the modem as long as the router is plugged in
    You must configure the modem first to bridge mode,then plug in the router and log into it
       1.)unplug router and have only the modem in
           go to 192.168.1.1 enter
          that will take you into the verizon modem/ if you have reset the modem then your user is; admin
                                                                                                                         your password is ; password
         once you lopg into that it will ask you to change the username/password
          just type in ADMIN in all 3 blanks
    now you are logged into the modem;;;;;;go to network at the top,then network connections on the left,broadband connection ,you will then put your protocol on bridge/routed bridge,
    now go to wireless settings at the top and make sure wireless is turned on
    you have the option to set up a security key on basic security settings
    once your modem  resets then plug in your router,you are now in bridge mode and the modems connection has moved to your router.  you must restart modem and computer for everything to take effect....
    also make sure and refresh your network list on your laptop
    Hope this works 

  • How can SQLDeveloper connect to 10g DB on server but UI cannot

    How can SQLDeveloper connect to 10g DB on server but the User Interface on local laptop cannot? What does the UI need that SQL Developer doesn't need?

    What kind of UI are you talking about?
    SQL Developer can use different type of connection method to connect to Oracle database.
    For example, basic method of SQL Developer is JDBC Thin connection, in which case, SQL Developer will use JDBC driver that come with it, don't need any other thing installed.
    SQL Developer also can use TNS method which will require Oracle client installed and TNS names configured.

  • Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server

    Hi,
    Our remote users had been connecting to our Exchange server at our office since the Exchange server was installed in 2011.
    Starting last Wednesday, Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server.  Outlook kept asking for a username and a password.  At the same time, entries of Event 4625 were generated on the Event
    log on out Exchange server. 
    Events 4625 has the following properties, "Logon Type: 3", "Failure Reason: An Error occured during Logon.", "Status: 0xc000006d", "Logon Process: NtLmSsp", and "Authentication Package: NTLM".
    By the way, I had used a laptop to test this problem.  Its Outlook work fine ion the main office, but it won't work outside of our office.
    Does anyone have any idea?
    Thanks.
    Johnnie :(
    Johnnie

    http://blogs.technet.com/b/rmilne/archive/2015/03/17/update-015_2d00_027-revised-_2800_3002657_2900_.aspx
    For additional people reading this thread, please update to v2 of that update.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Safari can't connect to the web proxy server (HTTP)

    Hello,
    I have following problem. I need to connect to the internet using a proxy server. I went to System Preferences/Network/Wi-Fi/Advanced.../Proxies. Then, I selected Web Proxy (HTTP) and enetered server's IP address and port. It looks like I did everything correctly, but Safary can't open any page because "Safari can't connect to the web proxy server (HTTP)". Does anyone know how to solve this problem?

    There are three possibilities:
    1. You entered the wrong address and port number for the proxy.
    2. You entered the wrong user name and password, if applicable.
    3. The proxy doesn't work or is incompatible.

  • Can I connect my application to mssql server

    Can I connect my application to mssql server ?

    nioe wrote:
    Something more specific, my search on Google does not appear something abuot mssql
    Perhaps you could help the process along by being a little more specific. Is this an in-house application. Will it ever leave your local network? Or does it need to run over the internet? Regardless, the best option will likely be some type of REST web service that any client can use.

  • Can't connect to the window application server.

    I have installed the Sun Secure Global Desktop Software 4.2,
    the client can connect to the unix application server but can't connect to the window applicaiont server.
    What can i do?
    Thank you.

    Hi.
    Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
    netstat -n
    command as to see if port 3389 is listed in LISTEN state.
    Best,
    Rob

  • Can't connect to the Software Update server (lionserver.t3m.private)? Please help!

    Has anyone experienced this; Can't connect to the Software Update server (lionserver.t3m.private)?
    I can no longer sync my iPhone as it needs an iTunes update. When I select update software and I get the error message above.

    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    208.67.222.222
    208.67.220.220
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4

  • I can't connected to the apple tv server

    I can't connected to the apple tv server?????

    Hello Dinaabiy,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV issues:
    Apple TV: How to restart your Apple TV
    http://support.apple.com/kb/ht3180
    If you can't restart your Apple TV because it's unresponsive, try the following:
    Hold down Menu and Down on the Apple Remote for six seconds, and then release when you see the indicator light on the Apple TV blink rapidly.
    Unplug the Apple TV power cord for three seconds, and then plug it back in.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Can't connect you the X11 window server

    Hi all!
    I am having problems eom to show reports in the BEA with Crystal Reports.
    I use BEA WEBLOGIC PLATAFORM 8,1 for Linux with Crystal Reports XI.
    I configured server BEA to initiate as a service in my Linux SUSE, and therefore I do not use myself in the graphical way.
    However when I try to visualize some report of crystal JSP page, I receive the following error:
    <code>
    Can't connect you the X11 window server using ':0.0 ' the value of the variable DISPLAY
    </code>
    With the reports me this error only occurs, therefore I have you vary webservices and paginas that function perfectly.
    Already I read some topics of the forum related with this problem, but no similar to mine or that it decided my problem
    Somebody could help me?
    Obs:I am brasilian and my English no is good!
    Sorry!

    Hi Vitor,
    May be this will help
    1) Setting the DISPLAY variable using script or in cell by issuing,
    setenv DISPLAY=<machine name>:0.0
    or
    export DISPLAY=<machine name>:0.0
    where <machine name> is the IP or name of the machine that has a graphics server process running, like X11.
    If you migrate your aplication to a different server, maybe the fonts put on the /fonts directory won't work fine...
    Sample:
    setenv DISPLAY=localhost:0.0 export DISPLAY
    results in setting this variable for only that script process or for the cell with the local scope.
    Use the xhost + command to make this variable to global scope with above.
    The link has many workarounds
    http://forum.java.sun.com/thread.jspa?forumID=57&messageID=1973308&threadID=280804
    Thanks
    Vimala

  • After Upgrade to 7.6.100.0 User Can't Connect To Wireless

    We have an internal 5508 controller that has two SSID's on it.  A secure SSID which uses an ACS server to authenticate users through AD, and a guest SSID which tunnels out to a DMZ 5508 anchor controller.  The guest users have no issues at all.  We upgraded our controllers to 7.6.100.0 about 3 weeks ago.  Since then, we've had an issue with the data path, for the anchor controller was down, and would only come up after reboot of the internal controller.  That was the 1st issue.  Over the past few days, I've had users from all over the country tell me that they cannot get connected to our secure network.  All users have Win7 machines.  All they see is the yell yield sign, on their wireless connection.  In the Network and Sharing center, they see the wireless network listed as an unidentified network (public network).  In the ACS, the users are authenticating with no problem (I can see it in the ACS logs), and they do receive an IP address.  However, they have absolutely no connectivity.  I have them try to ping the default gateway, of the subnet that they're assigned, and it comes back with request timed out.  Of course they can't get to the internet, or do anything, since they have no connectivity back to their gateway.  I've restarted the internal controller (thinking that there must be a hang like with the data path anchor issue) which didn't work, I've blown away the SSID, and recreated it.  That didn't work.  I even restarted the ACS, although that wasn't an issue.  It seems like any users that were connected, prior to the issue, and have no shut down their pc, are ok.  Users that have shut down, or have removed the secure wireless network profile, from their computer, can no longer connect.  They just get that the network is unidentified.  I'm not sure if there was any sort of Win7 update, or some other push, but I want to make sure that from the WLC perspective, there's no issue.  Thanks for any help!

    Hi Dan,
    You pay the price going for latest (does not mean greatest).
    Based on my experience, never jump into first release of a software code, unless you require those new features. Wait for a maintenance release to come & then go for it.
    Here are few critcal bugs of 7.6.100.0 which does not have a fix yet
    CSCum62305 : traffic stops for Mac OS, IOS devices. Other devices working fine
    CSCum49200 : Mac wireless clients in RUN state sometimes unable to ping gateway
    CSCuj17283 : WiFi clients dropping ARP  replies on TID 3 w/ ap3700
    I would suggest you to open a TAC case & work with them if you want to stay with this code (specially if you want to get 802.11ac ). Otherwise downgrade to 7.4.121.0 would be the option.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Vista users can't see my flash

    I've got quite a number of clent websites out there with
    flash headers. Some clients are now telling me that they can't see
    the flash headers at the top of their websites. If the flash if
    farther down on the page they can see it. We're using exactly the
    same code whether the flash is at the top or in the middle of the
    page.
    This is driving me nuts. I've attached the code we're using
    to play the flash on the following site: www.robertpisa.com. In the
    code you'll see the following:
    <embed src="Util/GetDocument.ashx?docId=1128126"
    That file name is an .SWF file that has been uploaded to a
    separate page on the site. That is the same whether the flash is at
    the top or in the middle of a page.
    These users with the problem are using Vista. Can we do
    something different in the code to make sure it plays on Vista? Is
    there something the users with Vista must do to see the flash?
    Any help would be most appreciated.
    Kathleen

    SecurityError: Error #2148: SWF file http://www.medranomusic.com/music/artists/gruposacrificio/hector.swf cannot access local resource M:\music\artists\gruposacrificio\hector.f4v. Only local-with-filesystem and trusted local SWF files may access local resources.
        at flash.net::NetStream/play()
        at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_play()
        at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
        at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_load()
        at fl.video::VideoPlayer/load()
        at fl.video::FLVPlayback/doContentPathConnect()
    ie, upload your fv4 and use a local path.

  • Exteral Users can't connect to the EDGE server

    HI All for about a week and half now I've been seeing this error a lot on my event logs. All my external users are no longer able to connect to the DMZ EDGE server with 3 external IP's. They can only use LYNC if they access out VPN. Any suggestions on what
    may be the issue???
    Log Name:      Lync Server
    Source:        LS Protocol Stack
    Date:          4/24/2014 9:07:14 AM
    Event ID:      14428
    Task Category: (1001)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      LyncEdge.*********.net
    Description:
    TLS outgoing connection failures.
    Over the past 16 minutes, Lync Server has experienced TLS outgoing connection failures 176 time(s). The error code of the last failure is 0x80090330(SEC_E_DECRYPT_FAILURE) while trying to connect to the server "**********.osis.is.local" at address
    [10.111.111.8:5061], and the display name in the peer certificate is "Unavailable".
    Cause: Most often a problem with the peer certificate or perhaps the host name (DNS) record used to reach the peer server. Target principal name is incorrect means that the peer certificate does not contain the name that the local server used to connect. Certificate
    root not trusted error means that the peer certificate was issued by a remote CA that is not trusted by the local machine.
    Resolution:
    Check that the address and port matches the FQDN used to connect, and that the peer certificate contains this FQDN somewhere in its subject or SAN fields. If the FQDN refers to a DNS load balanced pool then check that all addresses returned by DNS refer to
    a server in the same pool. For untrusted root errors, ensure that the remote CA certificate chain is installed locally. If you have already installed the remote CA certificate chain, then try rebooting the local machine.
    Thanks Dave Wolf

    Verify root certs exist in the Trusted Root Certification Store.
    Also you can refer below links
    http://www.shudnow.net/2011/02/01/lync-2010-edge-utilizing-windows-server-2008-r2-federation-tls-issues/
    http://theucguru.blogspot.com/2012/03/lync-edge-ls-protocol-stack-14428.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

  • Lion Server: new user can't connect

    This is a local ethernet network, Mac Mini running Lion Server 10.7.4.
    I created 2 new users with Server app, same specs as already existing users, but can't connect to the server with the new id's. I just don't undrestand what I'm missing. The old id's all work perfectly when I try to connect.

    Check your Services' ACL with Server Admin. It may happen that the new users are included in groups which are allowed for some services, but the new users are not included automatically in this group.

Maybe you are looking for