Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server

Hi,
Our remote users had been connecting to our Exchange server at our office since the Exchange server was installed in 2011.
Starting last Wednesday, Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server.  Outlook kept asking for a username and a password.  At the same time, entries of Event 4625 were generated on the Event
log on out Exchange server. 
Events 4625 has the following properties, "Logon Type: 3", "Failure Reason: An Error occured during Logon.", "Status: 0xc000006d", "Logon Process: NtLmSsp", and "Authentication Package: NTLM".
By the way, I had used a laptop to test this problem.  Its Outlook work fine ion the main office, but it won't work outside of our office.
Does anyone have any idea?
Thanks.
Johnnie :(
Johnnie

http://blogs.technet.com/b/rmilne/archive/2015/03/17/update-015_2d00_027-revised-_2800_3002657_2900_.aspx
For additional people reading this thread, please update to v2 of that update.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne 
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

  • Can't connect to the exchange powershell 2013

    Hi All ,
    I have exchange 2013 and for some reason I can't connect to the exchange powershell.
    Here is the message i get:
    ERBOSE: Connecting to ICTA-EXCH1.icta.ky.
    New-PSSession : [icta-exch1.icta.ky]
    Connecting to remote server icta-exch1.icta.ky failed
    with the following error
    message : Logon failure: unknown user name or bad password. For more information, see the about_Remote_Troubleshooting
    Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace)
    [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : LogonFailure,PSSessionOpenFailed
    VERBOSE: Connecting to ICTA-EXCH1.icta.ky.
    New-PSSession : [icta-exch1.icta.ky]
    Connecting to remote server icta-exch1.icta.ky failed
    with the following error
    message : Logon failure: unknown user name or bad password. For more information, see the about_Remote_Troubleshooting
    Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace)
    [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : LogonFailure,PSSessionOpenFailed
    VERBOSE: Connecting to ICTA-EXCH1.icta.ky.
    New-PSSession : [icta-exch1.icta.ky]
    Connecting to remote server icta-exch1.icta.ky failed
    with the following error
    message : Logon failure: unknown user name or bad password. For more information, see the about_Remote_Troubleshooting
    Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace)
    [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : LogonFailure,PSSessionOpenFailed
    VERBOSE: Connecting to ICTA-EXCH1.icta.ky.
    New-PSSession : [icta-exch1.icta.ky]
    Connecting to remote server icta-exch1.icta.ky failed
    with the following error
    message : Logon failure: unknown user name or bad password. For more information, see the about_Remote_Troubleshooting
    Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace)
    [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : LogonFailure,PSSessionOpenFailed
    VERBOSE: Connecting to ICTA-EXCH1.icta.ky.

    Hi ,
    No I'm not trying to connect remotely I'm trying to connect from the exchange server itself.
    I was trying also to connect remotely and got this message:
    New-PSSession : [icta-exch1] Connecting to remote server icta-exch1 failed with the following error message : The
    WinRM client sent a request to an HTTP server and got a response saying the requested HTTP URL was not available. This
    is usually returned by a HTTP server that does not support the WS-Management protocol. For more information, see the
    about_Remote_Troubleshooting Help topic.
    THX

  • Outlook 2013 client, not in domain, can't connect to the Exchange 2010 server

    Good Aftermoon,
    Having issues it seems getting to the right forum but here is what I have. Currently we are running an Exchange 2010 server. OWA is configured and I am not having any issues with people connecting through it. The issue I am having is that any user that tries
    to connect through Outlook 2013 gets an error message about the proxy server and then a certificate error. I have run the tests through the toolbox and get the following results. 
    Attempting to test potential Autodiscover URL https://autodiscover.westmoreland-county.org:443/Autodiscover/Autodiscover.xml
    Testing of this potential Autodiscover URL failed.
    Additional Details
    Elapsed Time: 694 ms.
    Test Steps
    Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
    The host name resolved successfully.
    Additional Details
    IP addresses returned: 69.89.25.150
    Elapsed Time: 284 ms.
    Testing TCP port 443 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
    The port was opened successfully.
    Additional Details
    Elapsed Time: 164 ms.
    Testing the SSL certificate to make sure it's valid.
    The SSL certificate failed one or more certificate validation checks.
    Additional Details
    Elapsed Time: 245 ms.
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.westmoreland-county.org on port 443.
    The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
    Additional Details
    Remote Certificate Subject: CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated, Issuer: CN=PositiveSSL CA 2, O=COMODO CA Limited, L=Salford, S=Greater Manchester, C=GB.
    Elapsed Time: 201 ms.
    Validating the certificate name.
    Certificate name validation failed.
     <label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_ctl02_ctl01_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    Host name autodiscover.westmoreland-county.org doesn't match any name found on the server certificate CN=*.bluehost.com, OU=PositiveSSL Wildcard, OU=Domain Control Validated.
    Elapsed Time: 1 ms.
    Attempting to contact the Autodiscover service using the HTTP redirect method.
    The attempt to contact Autodiscover using the HTTP Redirect method failed.
    Additional Details
    Elapsed Time: 234 ms.
    Test Steps
    Attempting to resolve the host name autodiscover.westmoreland-county.org in DNS.
    The host name resolved successfully.
    Additional Details
    IP addresses returned: 69.89.25.150
    Elapsed Time: 14 ms.
    Testing TCP port 80 on host autodiscover.westmoreland-county.org to ensure it's listening and open.
    The port was opened successfully.
    Additional Details
    Elapsed Time: 83 ms.
    The Microsoft Connectivity Analyzer is checking the host autodiscover.westmoreland-county.org for an HTTP redirect to the Autodiscover service.
    The Microsoft Connectivity Analyzer failed to get an HTTP redirect response for Autodiscover.
    Additional Details
    The URL specified in the location HTTP header was not HTTPS. URL: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
    HTTP Response Headers:
    Keep-Alive: timeout=10, max=500
    Connection: Keep-Alive
    Content-Length: 356
    Content-Type: text/html; charset=iso-8859-1
    Date: Wed, 03 Dec 2014 18:10:08 GMT
    Location: http://autodiscover.bluehost.com/Autodiscover/Autodiscover.xml
    Server: Apache
    Elapsed Time: 135 ms.
    Our setup currently our domain is being hosted and the web master has control of domain settings. 
    I am fairly new to the Excchange Server world so any suggestions that you may have as to how I can resolve this would be great. 
    Bill

    Hi Bill
    Thank you for your pos.
    You can use the following command to check whether you have purchased the certificate of audiscovery.westmoreload-country.org in your organization:
    Get-ExchangeCertificate –server CASServerName | fl
    For example: you want to return all certificates stored on the Client Access server named ClientAccess01, you will type the follow command in EMS.
    Get-ExchangeCertificate -Server ClientAccess01 | fl
    If you didn’t purchased the certificate of audiscovery.westmoreload-country.org, you could contact your certificate supplier.
    You could refer to the following link:
    https://support.microsoft.com/kb/940726?wa=wsignin1.0
    If there are any questions regarding this issue, please be free to let me know.
    Best regard,
    Jim

  • No Default Mail Client Error with Outlook 2010, Server 2008 R2 Terminal Server, and TAM

    We are running a software package on a Windows 2008 R2 Terminal Server called TAM (The Agency Manager) along with Outlook 2010.  The application uses a MAPI connection to retrieve mail data from Outlook to be able to send and receive messages inside
    the application.  On our individual PC's this works just fine, but on the Terminal Server users we get the message "Either there is no default mail client or the current mail client cannot fulfill the messaging request.  Please run Microsoft Outlook
    and set it as the default mail client."  
    I've tried the steps listed in KB 813745 which tells you to delete the registry keys and run a repair in Office, but that didn't resolve the issue.  I've searched on this issue, but haven't found anything useful.  Any suggestions would be much
    appreciated.

    Try to set DEP and add outlook.exe. I had outlook 2007 same problem. With DEP enabled and outlook, word en excel also added to the list it worked again.
    You can find it under this computer, properties, then change settings. Click advanced tab and then select the first "settings" option.The click the "Data Execution Prevention" (DEP) and select the last option and add the office programs
    there.
    Hope this helps.

  • Outlook 2013 client, not in domain, can't connect to the Exchange 2013 server.

    Hello everyone,
    A colleague and me are in the process of rebuilding our Hosted Exchange servers. Everything is working perfectly except for the local Outlook 2013 clients. They are not in the domain but in the same network (through VLANs) as our Exchange server, and still
    they can't connect to Exchange without the use of Outlook anywhere. If we use Outlook Anywhere, it connects perfectly. If I ping the Exchange servers (1 CAS, 2 MBX servers) I get response with the right IP addresses.
    We've tried to create a new profile, this goes without problems. We enter the FQDN (or IP address) of CAS server and the required usersname, and the FQDN gets resolved to the correct MBX server where the mailbox resides on. We complete the whole wizard and
    then start Outlook. We then get the error that Outlook can't logon to the Exchange server.
    Is this an authentication setting that is wrong or do we need to use Outlook Anywhere if the PC is not in the same domain as the Exchange server?
    Thanks in advance!

    Hi,
    Agree with Martina, all Outlook clients use RPC over HTTP to connect to Exchange 2013. if the server version is Exchange 2013 SP1, only Outlook 2013 SP1 use MAPI over HTTP to connect to server after we enable the protocol MAPI over HTTP.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Outlook 2010 "Server is unavailable" error when starting remote app

    All,
    I have recently built and configured a new server to run Remote Desktop Services.  It in on Server 2008 R2 Standard 64-bit.
    I have published numerous applications (e.g. Adobe, Visio, Project, etc. as well as Office 2010) to the host server.  Everything works with the exception of Outlook 2010 (client of an Exchange 2010 server).  When I or any of my users try to bring
    it up in the RDS portal, it goes through the normal start-up of any Outlook first use and looks for an existing email account.  As it is trying to load the user profile, an error pops up saying "The server is unavailable."  Clicking "Retry" does
    not work at all.
    When I run Outlook directly from the RDS host server itself, it loads up and runs fine so I know the RDS server can contact the Exchange server.
    Any ideas on why the Outlook application works on the host server but will not work when trying to run it through the RDS Web Access portal?
    Thanks.
    IT Manager, Alpha Corporation Dulles, VA

    You're probably running into this issue:
    http://support.microsoft.com/kb/2596960
    There are a couple of patches that you need to install and then a registry key that you have to add.
    Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

  • Pdf Preview Handler Error outlook 2010 Server 2008

    Pdf Preview Handler Error in outlook 2010 32.bit and Server 2008 64.bit. Using Adobe X. Registry app id correct. Turned on previewer in outlook in trust center. Repaired adobe installation. All to no avail. Any thoughts or fixes. Please Help

    Hello i got nearly the same problem. Selecting the .pdf attachment in outlook. error code says that no preview can be showed, because the needed preview isn't installed.
    Server 2012 R2 as Terminalserver, Outlook 2013, newest version of adobe reader XI.
    I've already checked the following:
    - outlook>options>trustcenter>trustcenter settings>attachment handling .. the box disable preview is clear .. furthermore outlook>options>trustcenter>trustcenter settings>attachment handling>attachment and documentpreview .. all
    boxes including pdf preview handler are filled.
    - adobe reader XI>edit>presettings?>e-mail-account ... outlook is standart.
    - Registryentry: "Change the AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}"
    - also i repaired the adobe installation and i reinstalled it a few times.
    - even checked the access-rights on the temp. directorys outlook uses for attachments and the users have full access.
    i have no more clue what it can be..
    so may you have the solution for me or at least some tips.
    Thanks,
    Nikolai

  • Outlook 2010 Server connection issue

    All of a sudden, one of my Outlook 2010 profiles, an  IMAP/SMTP account, says it can’t connect to the server
    My attempts to repair the connection get the messages “None of the authentication methods are supported by this client are supported by your server”.
    The configuration details haven't been changed, so what do I do now?

    Hi,
    Please first try to log into your webmail and check if it works well there.
    If the problem didn't exist in webmail, please go to File > Info > Account Settings > Account Settings > Highlight your IMAP account and click Change > More Settings > Select Outgoing Server tab and make sure you ticked the first two
    options. See:
    Besides, select Advanced tab and make sure you have entered the proper port number and encryption method for your server. You can refer to this:
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • Outlook 2010 - server unavailable - clicking Retry works

    I'm just installing Office 2010 on a Win2k8 R2 server with Remote Desktop Services (Exchange server is 2010).  When I start Outlook I get the message "exchange server unavailable", click Retry.  So I click Retry and after a minute Outlook launches. 
    The whole process takes longer than it should I'm sure, but it's consistent: every time at Outlook launch; wait, click Retry, wait, success.  Any ideas what I should check?
    Thanks
    Mark 

    Hi,
    Try to test the problem in Windows Safe mode with networking to check if the problem is caused by the
    background
    programs. If the issue persists, reinstall outlook 2010 and see if the issue persists.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

  • Exchange 2013 Issue - Cannot open default email folders. you must connect to microsoft exchange

    Hello all, this is my first post and nightmare to this issue because i believe i made mistake and overlook something. I search over the internet i cant find the best answer or maybe i missed something during the configurations. The exchange was working fine
    not after i change the setting following the method
    Configure External and Internal URL in Exchange 2012. after that, the users outlook experiencing disconnect from exchange. I restore back the previous setting but now I cant add any new user to the any Outlook version or change the server path. it will
    cause the problem which show the message below:
    "Can't open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folder with your offline folders with your Outlook data file (.ost)"
    I restarted the server and check all the Exchange services are running. The Outlook web is running and they able to receive and send out. The existing link to the exchange are still working so I not really sure what setting should i look into. I was thinking
    about restoring back from Window Server Backup but was advise not to do it unless there are ways to look back the previous setting from the backup.
    One of my ex-boss told me could be the Exchange Certificate but wasn't sure.
    I really appreciate someone could advice and help me resolved this issue.
    IT Tech Supports

    Actually all are affected, but i manage to solved it running Virtual test version to trace the issue and finally able to fix it. Thanks for asking.
    IT Technician

  • Renamed Domain - Clients Still "joined" to old domain, can't open Group Policy Management on Server

    Performed a Domain Rename as per the following instructions:
    http://www.bauer-power.net/2011/05/renaming-windows-domain-with-rendom.html#.U4OZRPmSyTM
    and then after these issues I have gone through the related technet articles starting here:
    http://technet.microsoft.com/en-us/library/cc794793(v=ws.10).aspx
    specifically the Fix Group Policy Objects and Links.
    But still I have the following issues:
    At least for group policy clients believe they are on the old domain - despite even having renamed the computers with the new domain name.
    When I perform a gpresult the output file shows as being connected to the old Domain - despite manually going into computer properties and renaming the computer with the new domain name...
    CN=Allister Wade,OU=Users,OU=Home,DC=NEWDOMAIN,DC=local
    Last time Group Policy was applied: 27/05/2014 at 5:36:31 AM
    Group Policy was applied from:      finch.newdomain.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        OLDDOMAIN
    Domain Type:                        WindowsNT 4
    On the server I cannot open Group Policy Management on the single Domain Controller as it is looking for a DC on the old Domain:
    Even though it has listed the new domain in the root of the management console when I attempt to expand it out I am prompted:
    "The specified domain controller could not be contacted. This affects the following domain in the console.
    Domain: olddomain.local
    The error was:
    The specified domain either does not exist or could not be contacted."
    I can select to remove the domain from the console but this does nothing - as said it already shows the new domain in the console.
    Far as I am aware the clients should not even of needing renaming or changing the domain, but were having authentication issues before I did this. Not sure what I have done wrong here..?

    Client's NSLookup shows "UnKnown" as DNS Server so thought to check DNS out.
    This is result of dcdiag /test:DNS.
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = finch
       * Identified AD Forest. 
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\FINCH
          Starting test: Connectivity
             ......................... FINCH passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\FINCH
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... FINCH passed test DNS
       Running partition tests on : ForestDnsZones
       Running partition tests on : DomainDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : NEWDOMAIN
       Running enterprise tests on : NEWDOMAIN.local
          Starting test: DNS
             Test results for domain controllers:
                DC: finch.NEWDOMAIN.local
                Domain: NEWDOMAIN.local
                   TEST: Delegations (Del)
                      Error: DNS server: finch.olddomain.local. IP:<Unavailable>
                      [Missing glue A record]
             Summary of test results for DNS servers used by the above domain
             controllers:
                DNS server: 203.12.160.35 (<name unavailable>)
                   1 test failure on this DNS server
                   PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 203.12.160.35               
             Summary of DNS test results:
                                                Auth Basc Forw Del  Dyn  RReg Ext
                Domain: NEWDOMAIN.local
                   finch                        PASS PASS PASS FAIL PASS PASS n/a  
             ......................... NEWDOMAIN.local failed test DNS

  • Remove Last Public Folder Database / Impact on Outlook 2007 - 2013 Clients ?? / Exchange 2010

    Hello together, 
    we have an Exchange 2010 SP3 UR5 Infrastructure. Now the end is in sight for Public Folders :)
    We want to Remove our Last Public Folder Database on our Organization. 
    How can i get this managed and what is the Outlook 2007+++ Client Impact on this Action ?
    The Plan is:
    Remove all Public Folder Content
    Set the OAB to Web Distribution Only
    Clear the “msExchHomePublicMDB” attribute on Exchange Databases
    Clear  the “siteFolderServer” attribute on CN=Exchange Administrative Group (FYDIBOHF23SPDLT) 
    Remove the Public Folder Database with ADSI
    Is there anything else to do ?
    Is there any Outlook Client Impact on this ? Does the Users get a Outlook Error like "your exchange administrator did some changes please restart" or is it transparent for the users ?
    thanks for Feedback, 
    Best, 
    Martin

    Hello,
    Please follow the Naren.Neelam's suggestion.
    Besides, I recommend you remove database via EMC or EMS. If you can't remove the database via EMC or EMS, and then you can use ADSIEDIT to remove the public folder database from the organization.
    When you remove a public folder database, the Exchange database (.edb) file for the database and other files associated with the database aren't automatically deleted. You must delete the public folder database files manually.
    Here are some articles for your reference.
    http://technet.microsoft.com/en-us/library/dd876883(v=exchg.141).aspx
    http://exchangeserverpro.com/exchange-2010-remove-public-folder-database/ (Note: Microsoft
    is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you
    completely understand the risk before retrieving any suggestions from the above link.)
    Cara Chen
    TechNet Community Support

  • Exchange/Outlook 2010 Server Side Rule

    Hi guys,
    Does anyone know what happens with regards to rule that forwards email received to a new destination (in this case a contact) but the outbound message size limit is breached.  In normal operation Outlook would pop-up a message indicating but what happens
    in the case of the rule.  Would it fail and retry or what?
    Thanks
    Andy
    Cheers Andy

    Good question. It seems our enterprise Exchange team have set the inbound message limit to 35MB and the outbound to 25MB. This therefore plays havoc with journaling to an external source.
    Just trying to determine if it would just silently fail or cause anything else.
    Appreciate the help.
    cheers
    Cheers Andy
    Interesting. Where is that set exactly? On the receive and send connectors or the global limits?
    The global limits should match for the send and receive limits and be equal to the highest allowed message size.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Java 7 Update 25 Client App Downloaded From Web Start Can't Connect Out

    Since Java 7 update 25, I have an issue where my client Java application, downloaded with Java Web Start, can no longer connect to a remote server. (The client uses remote EJB to connect various servers). The issue I believe is that the client application is being blocked by security features of this Java update.
    A very quick (random?) fix around the problem is to show the Java console. If the Java console is enabled to be shown, the client application can connect fine.
    Although showing the Java console is a quick fix, it's not one we particularly want to keep asking customers to do. I understand we may need to define the Codebase and Permissions in the manifest file as described here: http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/no_redeploy.html..
    I have defined the Codebase and Permissions in the manifest of the client jar's we build ourselves. I believe this has worked as we no longer see "Missing Codebase manifest attribute for...." in the console for our own jar's. However, the application still cannot connect out. I'm stumbling around somewhat on this issue and trying various things in an attempt to get this to work. Assuming i'm on the right lines and the problem is some jars missing the Codebase and Permissions in their manifests, my question is, should I and how can I modify the manifest of 3rd party jars to include this information? For example, the client app requires many JBoss and EJB client jars - do I need to somehow modify the manifest of all of these jars to include the codebase and permissions?
    It goes without saying that all the jars are signed - the application would not start at all if there was a problem here. So the application starts with it's login box - but it simply cannot connect out to the servers.
    If anybody can offer any help on this issue i'd be most grateful. As a quick fix, is there a way to get this to work via adjusting Control Panel settings (other than showing the console)? I have played with a lot but not stumbled on a way to get this to work other than showing the console, although ideally i'd like to be able to get this to work without having to do any tweaks to clients Java control panel.

    We're also seeing this. The 7u25 update completely derailed a trial program we were conducting, because no one could log in to our application via WebStart once they upgraded Java.
    Our login code crashes because SwingUtilities.isEventDispatchThread() throws an NPE.
    We tried theskad81's fix but it didn't work for us. We worked around the issue by hosting u21 on our site and pointing our WebStart page there instead of at Oracle's update site.
    *** ORACLE: PLEASE FIX THIS ISSUE USING APPLE'S FIX (mentioned in an earlier post - see above) ***
    Slightly edited stack trace:
         javax.security.auth.login.LoginException: java.lang.NullPointerException
        at sun.awt.SunToolkit.getSystemEventQueueImplPP(Unknown Source)
        at sun.awt.SunToolkit.getSystemEventQueueImplPP(Unknown Source)
        at sun.awt.SunToolkit.getSystemEventQueueImpl(Unknown Source)
        at java.awt.Toolkit.getEventQueue(Unknown Source)
        at java.awt.EventQueue.isDispatchThread(Unknown Source)
        at javax.swing.SwingUtilities.isEventDispatchThread(Unknown Source)
        at com.abc.ConsoleAuthUI.handle(ConsoleAuthUI.java:43)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
        at sun.rmi.transport.Transport$1.run(Unknown Source)
        at sun.rmi.transport.Transport$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.rmi.transport.Transport.serviceCall(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
        at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
        at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
        at sun.rmi.server.UnicastRef.invoke(Unknown Source)
        at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(Unknown Source)
        at java.rmi.server.RemoteObjectInvocationHandler.invoke(Unknown Source)
        at com.sun.proxy.$Proxy1.handle(Unknown Source)
        at com.abc.ms.rmi.MsLogin$1.handle(MsLogin.java:100)
        at javax.security.auth.login.LoginContext$SecureCallbackHandler$1.run(Unknown Source)
        at javax.security.auth.login.LoginContext$SecureCallbackHandler$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext$SecureCallbackHandler.handle(Unknown Source)
        at com.abc.ms.auth.abcLoginModule.login(abcLoginModule.java:35)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at javax.security.auth.login.LoginContext.invoke(Unknown Source)
        at javax.security.auth.login.LoginContext.access$000(Unknown Source)
        at javax.security.auth.login.LoginContext$4.run(Unknown Source)
        at javax.security.auth.login.LoginContext$4.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokePriv(Unknown Source)
        at javax.security.auth.login.LoginContext.login(Unknown Source)
        at com.abc.ms.rmi.MsLogin.authenticate(MsLogin.java:111)
        at com.abc.ms.rmi.MsLogin.login(MsLogin.java:92)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
        at sun.rmi.transport.Transport$1.run(Unknown Source)
        at sun.rmi.transport.Transport$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.rmi.transport.Transport.serviceCall(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
        at javax.security.auth.login.LoginContext.invoke(Unknown Source)
        at javax.security.auth.login.LoginContext.access$000(Unknown Source)
        at javax.security.auth.login.LoginContext$4.run(Unknown Source)
        at javax.security.auth.login.LoginContext$4.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokePriv(Unknown Source)
        at javax.security.auth.login.LoginContext.login(Unknown Source)
        at com.abc.ms.rmi.MsLogin.authenticate(MsLogin.java:111)
        at com.abc.ms.rmi.MsLogin.login(MsLogin.java:92)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
        at sun.rmi.transport.Transport$1.run(Unknown Source)
        at sun.rmi.transport.Transport$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.rmi.transport.Transport.serviceCall(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(Unknown Source)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
        at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
        at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
        at sun.rmi.server.UnicastRef.invoke(Unknown Source)
        at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(Unknown Source)
        at java.rmi.server.RemoteObjectInvocationHandler.invoke(Unknown Source)
        at com.sun.proxy.$Proxy0.login(Unknown Source)
        at com.abc.abc.ui.console.Main.attemptLogin(Main.java:488)
        at com.abc.abc.ui.console.LoginDialog$7.run(LoginDialog.java:182)
        at com.abc.util.GrayTimer$GrayTimerTaskWrapper.run(GrayTimer.java:84)
        at java.util.TimerThread.mainLoop(Unknown Source)
        at java.util.TimerThread.run(Unknown Source)

  • Solaris nis client can't connect to Windows 2008 NIS Server across subnets

    I have been using Microsoft Windows Server for NIS for years to centralize some accounts accessing Solaris and Linux OS.
    Windows 2003 R2 Indentity Management for UNIX version of Server for NIS was last working version with Solairs.
    After upgrading Domain to Windows 2008 all Solaris clients that are on different subnets fail to bind and connect to NIS servers now.
    These servers already were setup using ypinit -c to manually add the NIS servers to connect to and prior to Windows 2008 this worked.
    Now no Solaris nis clients on different subnets (no firewall between) can connect , but other Unix/Linux OS connect fine.
    Is this a known issue and can we get a resolution as it seems only Solaris is affected?

    Hi Mid.Hudson-IT,
    Before we begin ,we should ensure we have configured the printer server correctly .
    Here is a link for reference of configuring the printer server .
    Print server role: Configuring a print server
    https://technet.microsoft.com/en-us/library/cc775791(v=ws.10).aspx
    "I can map all of the printers on the network to the print server as-well as install the drivers correctly and I can resolve the IP and server name via DNS"
    From this sentence ,I can`t figure out whether you have tried to ping the server both with the IP adress and name adress from the client ?
    If we can ping the print server from the client,we can ensure the connection to the printer server is good .
    Then we can try to install the printer driver directly to have a check .In the adress bar of Windows Explorer ,input "\\server name \the printer name"
    If we cannot ping the print server ,we should troubleshoot the network issue firstly.
    We also can check the event viewer for more information to troubleshoot this issue .
    Best regards

Maybe you are looking for

  • Is it mandatory to use PRIOR in CONNECT BY NOCYCLE in Oracle 10.2.0.4

    Hi, Is it mandatory to use PRIOR in CONNECT BY NOCYCLE in Oracle 10.2.0.4. While I am executing a query in 10.2.0.2 which is having CONNECT BY NOCYCLE and PRIOR is not included, it was executing fine. But in 10.2.0.4 If i run the same query without u

  • Losing my mind with a scrollpane

    Hello all. I am trying to get a scroll pane to work in an application that I have built for school. I am trying to get an amortization table to scroll through for a mortgage calculator. It isn't recognizing my scrollpane and I am not sure why. Could

  • Issue with buttons

    Hi guys, I'm having an issue with some thumbnail buttons that are part of my own folio site. I've already built the site but have been going back over it and improving it. I'm currently updating my gallery section which simply consists of thumbnails

  • Why do I get this result when I use split

    Hello guys I have created a script that looking for the active path, var myPath = (File($.fileName).parent.parent.parent.fullName); alert(myPath) I recieve "/xxxxx/xxxx/xxxx/341542" the only thing I am interested of in this information it's the numbe

  • Ipod Touch error 13019

    Hi, can anyone help please?? My daughter has an 8gb 2nd generation iPod Touch and out of the blue, I have the error message stating it could not sync error 13019. I have looked all over the internet and tried various solutions that other people have