[Vista x64] Microphone problems with X-Fi and 2.15 drive

Hi guys,?I'm having a problem with the 2.5 drivers on my X-Fi Platinum card, under Vista x64. It seems the microphone inputs (both on the card and on the breakout box) have problems, any recordings stutter and pop rapidly, making any recordings (or voice chat)?quite useless. This issue doesn't occur with the 2.3 drivers. Is there any known solution to this problem yet?My system: e6600 CPU, Asus P5W-DH motherboard (975X chipset), 4GB RAM, 8800GTX, X-Fi Platinum. Thanks.

hey Darkman,
since I never had this problem with installing this software, I cant really tell whats wrong, but you dont need it anyway to use the x-fi.
but you may want to try one thing, since it crashes at 27% something may still be in use, so check your task manager and close everything that has CT in its name. then try reinstalling again. If that still doesnt work, try to empty your temp folder, its located in documents and settings/user you are/local settings/temp
if that still doesnt work, try maybe something stupid, wait a bit longer than usual and keep the install window in the front to watch the process, maybe your pc is just a bit slowed down by other software so it may take longer than normal

Similar Messages

  • Problems with Ethernet controller and PCI device driver on Satellite L30-10X

    Hellow!
    Sorry for my bad English, I'm from Russia.
    Just few days ago I bought Satellite L30-10X with W Vista on board. My opinion, that this OS does't very good on this computer, so I install W XP.
    I have some problems with drivers. At first, I dont know what model I have:PSL30 or PSL33? I download all drivers for both models. But, after installation, computer doen't find drivers for Ethernet controller and PCI device...

    Hi
    Satellite L30-10X belongs to the PSL33E series. This number can be found on the label placed on the bottom of the unit!
    You have to choose this number from the driver download form to get the compatible XP drivers.
    I dont know why you are not able to install the LAN driver. Ive got the same notebook with Vista and Ive installed the XP and all drivers run fine.
    I assume you have installed the drivers in wrong order. Please take the look in the Toshiba installation instruction txt file. In this order you have to install the driver! Its important.
    I think you should install the XP again to ensure the clean registry and then download and install the compatible XP drivers like mentioned in the installation instruction file.
    Good luck

  • Having problems with front row (and the opticle drive)

    I bought my macbook three days ago, and I'm already having problems. First off, I transfered music from my user profile on my old iMac G5 to the macbook via data DVD. My music collection had some purchaces from the itunes store, so I had to go through the authorization thing, and I can now play them just fine in the iTunes library, but the problem is, if I try to use the front row program to play my purchaced music, I get the message saying that I have to authorize it first. What the ****? Does anybody else have this problem? Also, like many other macbook users, I'm having problems with the opticle drive, such as getting cds to be recognized and other things of that nature.

    I noticed that this problem started after I tried to use a software to unlock my drive's region...
    I believe this is the problem. The VLC Media Player will usually play DVDs from other regions without changing the settings on your optical drive. You may need to reset your optical drive's firmware back to the original setting, make sure you have the region set for the one you'd prefer to use the most and then use VLC to play the other DVDs.
    -Doug
    P.S. After two years in the Front Row forum, I'm not sure I've ever heard of anyone playing HDDVD_TS folders with Front Row. I'm not saying it won't work, but I'm not sure it's really supported either. I do have DVD Studio Pro myself, but I'll have friends or family staying with me for nearly the next month, so my evenings and weekends will be a bit full to try making one up for testing...

  • Problems with time machine and external hard drive

    Hi all
    In 2009 with my imac I bought a WD external hard drive which the computer says is 148GB formatted. I recall that the hard drive contained folders with files for the running of the hard drive when I bought it - and after it had been plugged in to a mac and used as a time machine, it no longer worked on windows computers.
    Now I have used 195 GB on my computer's internal hard drive and wish to stop using the external hard drive as a time machine and instead use it for swapping files between computers and the like.
    How can I wipe the time machine back ups and start using it as per usual again? do i need to obtain the WD files from somewhere?
    thanks in advance
    Nick

    Hi Nick,
    Avoid the WD files completely, not needed & often a problem.
    You need to erase the Drive, & to use it on both Format it MS-DOS/FAT32, on the Mac or PC, but will have a 4 GB filesize limit, as well as other limitations.
    One option not mentioned yet is MacDrive for your PCs... allows them to Read/Write  & Format HFS+, so no need to reformat it...
    http://www.mediafour.com/products/macdrive/

  • Problems with iMac G5 and LaCie external drives

    I have an early iMac G5 (without iSight), running OS 10.5.2. I've had a 250GB LaCie external hard drive for about a year now, and it worked fine up until a couple weeks ago, when I got this message:
    Disk Repair
    The disk "External HD" was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible."
    I was unable to save anything to the drive after this, including altering files already on the drive. Long story short, I bought another LaCie drive, because I needed more space anyway. I got the 500 GB model, moved everything onto it, erased the old drive, and then I had two working drives. I've since only been using the new drive, but just a few days later, I got the same message again, and am having the same problem, but this time for the new drive. I'm not a computer-savvy person, so I have no idea what could be causing this. This happened not long after updating to OS 10.5 from 10.4 - I'm not sure if this could be related. Can anyone help?

    One thing to look out for is the power source. If you have a huge octopus of power cords plugged into one outlet, the drive may not be getting enough power to operate properly. That would explain why the same thing happened on two separate drives, both recently. You may have added something new to the +power strip+ that is overtaxing the available power draw.
    Someone I know had this issue. It never occurred to him or me to consider this possibility. His external drive was regularly getting disk directory errors. I initially thought the drive was going bad, but once we distributed the power cords to two power strips connected to different outlets, the problem did not recur.
    Your problem may be something else, but it sounded too familiar to not mention my experience with the power cord octopus monster.

  • Problems with itunes 10 and external hard drive

    Hi
    I was recently forced to change the internal hard drive on my G5 Tower, and the external hard drive where I keep my music library.
    The new external drive had all my music files copied to it. I reloaded my itunes library files (that I had backed up from old computer) into my music folder and I named the new external drive as the media folder in Itunes preferences. The first time I used itunes it asked me if I wanted it to locate all files to which I pressed OK. itunes quickly found the majority of files and I cleaned up / organized the small mess left behind.
    Trouble is a few problems have occurred. Firstly, itunes seems slow – there’s a sluggish pause flicking between tracks – where as before it used to snap into response. Occasionally I’m asked to locate files which I thought was a task it had already done - and every now and again when I check the external hard drive music library I find files have been moved from there album locations to ‘untitled’ folders, etc. I can only assume itunes is doing this. I’ve also noticed I can’t remove the external hard drive from the desktop without closing itunes first which never happened before.
    This is getting somewhat frustrating. Can anybody advise?
    Much appreciated.
    K

    Hi Nick,
    Avoid the WD files completely, not needed & often a problem.
    You need to erase the Drive, & to use it on both Format it MS-DOS/FAT32, on the Mac or PC, but will have a 4 GB filesize limit, as well as other limitations.
    One option not mentioned yet is MacDrive for your PCs... allows them to Read/Write  & Format HFS+, so no need to reformat it...
    http://www.mediafour.com/products/macdrive/

  • Raid problem with 845 PE and 2 SATA drive

     have a big problem, I have bought an mainboard MSI 845PE MAX 3 SR, and I have installed 2 Hard drive Maxtor SATA 80GB in Combination Raid 0. When I install the operating system, Windows XP professional, after I have pushed F6 and insert the floppy, the installation continues but after 3 minute when the system install the FAST TRAK driver, I have a message " The driver is not certified for windows XP " if I click on OK or NO, the system stopped ...
    please help me fast
    ths
    sorry for my bad english

     
    Solved, it turned out to be a setting in BIOS that I overlooked, drive is now in use.

  • Problems with 1.5 and vista - audio recording

    Hello.  I have PP 1.5.  I have an Audio Techinca AT2020USB microphone.  I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio.  On the computer that runs Vista, I can not.  Is anyone aware of any patch or anything that will allow me to make this work?
    Please, advise.  Thank you.
    bobhugejunk

    YOU ARE THE MAN!!!!  It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
    Thank you!
    Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
    Date: Wed, 21 Oct 2009 19:34:20 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problems with 1.5 and vista - audio recording
    As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
    Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
    Good luck,
    Hunt
    >

  • Problem with the right and left Channel

    Hey Guys,
    i bought a few days ago the X-Fi Titanium PCIe Card. Now my problem:?
    After i installed the drivers i noticed that i can hear the sounds of the left speaker also in the right speaker of my Headphone (Sennheiser PC60). I made a channel test and here the same. The guy sais "Left Channel" and i hear it on both speakers. The same with the right channel.
    I made a clean restart and uninstalled all Drivers and Applications and reinstalled them: -> Same problem
    I made a clean Windows installation (Vista x64): -> Same problem
    i tried the Daniel_K-Driver: -> Same problem
    Have someone an idea to solve that problem?
    greets
    kybo

    When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
    Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
    The above is some background info. To your current situation, you can use a workaround like:
    * Export your audio file to separate channels by File > Export > Channels to mono files.
    You will get 2 files with _L and _R suffix.
    You can then edit them separately. You can go from Mono to Stereo by the following step.
    Or
    * Choose - Edit > Insert > Channels  into New Multitrack file.
    That will separate the Left and Right Channels and add them to a new multitrack file.
    You can then click the Edit link at the top right of the channel to edit it.
    You can then save that file as a new audio file.
    Dean

  • Problems with captivate 8 and windows 8

    I´m using captivate 8 and windows 8, and I am having problems with the visualization and publication of my projects. For visualization, there is a message of an error with syntax of the files ou directory, and nothing happens. For publication, I can´t see the project published in the browser. It opens only a text file, with the codes. Is there anyone thar can help me with that?

    Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

  • Boot Camp problems with Windows 7, and a new Macbook Pro

    When I try to install Windows 7, when the process is almost complete and Windows is finalizing all settings, the system reboots then gets stuck at the white/gray bootscreen, and then tries to boot from disk, only to repeat the bootscreen cycle indefinitely. How do I fix this? Thank you very much.

    My MAC BOOK is 13 inch, first generation of unibody that I bought when it first came out last November, 2009. It seems that the latest boot camp 3.1 does not support windows7 64 bits on my mac book model. I followed Apple instruction to upgrade boot camp 3.0 when running XP 32 bits. And I then upgrade my XP 32 bits to 64 bit Windows 7. The upgrade/installation was successful but I encountered a lot of problems with the mouse and sound.
    1. No sound with my new Windows 7 64 bits.
    2. I managed to make Windows 7 64 bit recognize my apple mighty mouse. But the mouse does not funtion normal as expected. It does not work with swiping and scrolling.
    3. I could not re-install boot camp 3.0 from windows.old nor from the Mac OS X installation disk. When I tried to run setup.exe from the MAC OS X snow leopard, I got the error "Boot camp x64 is unsupported for this model"
    I am really disappointed that boot camp 3.1 is not universally supported for all mac book or mac book pro.
    I need help to re-install boot camp for my Windows 7? I bought the upgrade through education upgrade program and I selected to get 64 bit version so I do not want to rollback the installation to 32 bit.
    Please help.

  • SynTPEnh.exe x64 compatibility problem with Cakewalk SONAR X1c.

    SynTPEnh.exe x64 compatibility problem with Cakewalk SONAR X1c.
    Everytime when I use the middle key (of UltraNav, with blue dots) in the Step Sequencer (or other places, mostly) in Cakewalk SONAR X1c (x64) to try to scroll horizontally, both SONARSTD.exe and SynTPEnh.exe crashes down.
    Operating System: Windows 7 SP1 x64
    Model: Thinkpad T520 42425FC

    Hello,
    Can you tell us which version of the SynTPEnh.exe file is installed on your computer?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Problems with ListViews Drag and Drop

    I'm surprised that there isn't an Active X control that can do this more
    easily? Would
    be curious to find out if there is - although we aren't really embracing the
    use of
    them within Forte because it locks you into the Microsoft arena.
    ---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
    PM ---------------------------
    "Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
    Please respond to "Stokesbary, Michael" <[email protected]>
    To: "'[email protected]'" <[email protected]>
    cc:
    Subject: Problems with ListViews Drag and Drop
    I am just curious as to other people's experiences with the ListView
    widget when elements in it are set to be draggable. In particular, I am
    currently trying to design an interface that looks a lot like Windows
    Explorer where a TreeView resides on the left side of the window and a
    ListView resides on the right side. Upon double clicking on the
    ListView, if the current node that was clicked on was a folder, then the
    TreeView expands this folder and the contents are then displayed in the
    ListView, otherwise, it was a file and it is brought up in Microsoft
    Word. All this works great if I don't have the elements in the ListView
    widget set to be draggable. If they are set to be draggable, then I am
    finding that the DoubleClick event seems to get registered twice along
    with the ObjectDrop event. This is not good because if I double click
    and the current node is a folder, then it will expand this folder in the
    TreeView, display the contents in the ListView, grab the node that is
    now displayed where that node used to be displayed and run the events
    for that as well. What this means, is that if this is a file, then Word
    is just launched and no big deal. Unfortunately, if this happens to be
    another directory, then the previous directory is dropped into this
    current directory and a recursive copy gets performed, giving me one
    heck of a deep directory tree for that folder.
    Has anybody else seen this, or am I the only lucky one to experience.
    If need be, I do have this exported in a .pex file if anybody needs to
    look at it more closely.
    Thanks in advance.
    Michael Stokesbary
    Software Engineer
    GTE Government Systems Corporation
    tel: (650) 966-2975
    e-mail: [email protected]

    here is the required code....
    private static class TreeDragGestureListener implements DragGestureListener {
         public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
         // Can only drag leafs
         JTree tree = (JTree) dragGestureEvent.getComponent();
         TreePath path = tree.getSelectionPath();
         if (path == null) {
              // Nothing selected, nothing to drag
              System.out.println("Nothing selected - beep");
              tree.getToolkit().beep();
         } else {
              DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
                   .getLastPathComponent();
              if (selection.isLeaf()) {
              TransferableTreeNode node = new TransferableTreeNode(
                   selection);
              dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
                   node, new MyDragSourceListener());
              } else {
              System.out.println("Not a leaf - beep");
              tree.getToolkit().beep();
    }

  • Problems with Customer Service AND unexplained charges!

    I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
    Does anyone have these reoccuring problems!?

    I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
    After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
    All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
    "they should" does not help my bill with the extra armount of charges.

  • Problems with dropped calls and no reception on Samsung Continuum

    My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone.  The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference.  The phone freezes up frequently, even if no apps are running in the background.  We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet.  The screen saver kicks in even when we are actively dialing a number, or typing in a text message.  The overall performance of the phone is also poor, and it is quite slow much of the time.
    We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan.  None of my friends with non-Samsung phones are having the same problems with phone reception and performance.  I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
    I am not upset that my phone has not been updated to Android 2.2.  I just want the phone to perform as stated, and not fail at its primary function:  making and receiving phone calls.  I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care.  I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
    Thank you.

    If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
    What carrier were you using with the Razor? AT&T? Same area?
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Maybe you are looking for