VL01N field Actual GI Date

Can someone tell me how to make the field Actual GI date in VL01N so that it can not be modified or can you tell me how to hide this field?
Thanks,
Sean

Dear Sean,
Not very sure, but to hide Field: Actual GI Date in VL01N;
Change Screen Variant: Z1_1102 for "Actual GI Date" in T. Code: VL01N
Procedure:
T. Code: SHD0.
Key-in Transaction Code as VL01N in Field: Transaction Code
Next, in Tab: Transaction Variant; in Field: Transaction Variant, Key-in Z1
and hit "Enter".
It will list-out all the entries in Sub-Tab: Assigned Screen Variant.
Select the line for Screen Variant: Z1_1102
and Click Blue-Lens (just above the line-item).
In detail-screen, you will find "Actual GI Date" marked as ticked for Column: Output Only.
Instead, mark the Column: Invisible for Field: Actual GI Date".
Change Screen Variant: Z1_1102 for "Actual GI Date" in T. Code: VL01N
Best Regards,
Amit
Note: Few informations:
Program Name: SAPMV50A
Screen Name: 1102
Actual GI Date (Table-Field): LIKP-WADAT_IST

Similar Messages

Actual GI date mandatory using screen variant SHD0

Hello All,
I have a requirement to make the Actual GI Date as mandatory field in Vl01n.
I am using screen variant in SHD0
TRANSACTION CODE -- VL01N and
SCREEN VARIANT --- BUS2124_DEC_CREATE_1102
PROGRAM -
SAPMV50A
SCREEN ---1102
and click on change mode
This will lead to nex screen where you can find the Field ACTUAL GI DATE against which the field status are available
Check the REQUIRED field and save it.
Here comes the problem when i tested from SHD0 transcation the actual GI date is showing has mandatory field but when i Run VL01n Transaction Actual GI date is not showing has mandatory field. Could you please tell me what may be the problem?
or let me know if any other method to make the Actual GI date has mandatory field in Vl03n.
Thanks in Advance.
Satish

You should've created a transaction variant. (You can attach the screen variant to the trxn variant as well).
In SHD0 there is a tab "Standard Variant", there you've to enter the name of your transaction variant & activate it. This will bind the trxn variant with the trxn & everytime you run the trxn your trxn variant will be executed.
BR,
Suhas

Actual GR Date in Inbound Delivery takes current Date

Hello Everybody,
The Output SPED gets issued after PGI from the Outbound in an Intercompany, it generates an Inbound automatically.
Problem: On the Inbound the field "Actual GR Date" gets populated with the same date as when PGI occurs. The PGI occurs in the US Plant while the PGR is supposed to occur in Europe. The Route Transit Time is 30 days.
Example: If the PGI Date is today, 18th May the system populates the Inbound Delivery field "Actual GR Date" as 18th May.
Research into Causes:
It appears the system is not adding the Route Transit Time. We used the "New Route Determination Time" the the value "A" for the Inbound as well as the Outbound and we do not maintain entries in Table TROAL. Yet, the Inbound still populates with the PGI Date from the Outbound.
Business Impact:
The ATP in Europe considers Stock In-Transit for real-time updates. So, this Inbound gets considered for ATP in Europe starting from today's date, 18th May 2011; so Europe will start promising their customers that these goods will be available from today; however, in reality the products will be available in Europe only after 30 days. This is the impact of the field "Actual GR Date" on the Inbound Delivery.
Thanks,
SR

Check the SPED functional module how the atcual date is passing.Check with technical team if they can insert alogic the actual date should be after PGI date +30 days as the delay required to reach the material.If you are not able to insert the logic then stop passing the actual GR date in GR.I think it is possible.

I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

Hi Abdul,
Sorry for my unprecise answer, but you talk about a tcode, but you're using a BAPI Call. Maybe you want to call the transaction in batch mode?
http://help.sap.com/saphelp_erp60_sp/helpdata/de/fa/09715a543b11d1898e0000e8322d00/content.htm
Regards,
Franz

Field for actual delivery date

Hi ABAP gurus,
i want to find actual delivery date field and table and also expected delivery date for delivery .
can you please tell me the table for actual delivery date.
Thanks,
Jignesh .

Jack,
LIKP-WADAT_IST - Actual Delivery Date in a Delivery
LIKP-WADAT - Expected Delivery Date / Planned Goods Movement date
HTH
VB

Fieldes planned delivery date and actual good recipt date for SAP QUERY

Hi Gurus
I am changing sap query. I need to find two fieldes : planned delivery date and actual goods recipt date
I dont know MM tables, do you know wrhere are?
in table EKPO i don't find the fieldes.
Thanks in advance

Thank a lot!
Regards

Actual GI Date field at delivery

Dear Gurus,
At delivery document the fied "Actual GI Date" is grayed out by default, in standard it should be open, i can not even incorporate any date my self in it.
can any one knows what thing I configure wrong... have any idea.
Regards

If PGI is done,this field will be greyed out or Your implmentor may blocked this field using transaction variant for restricting it
from entering irrelevant dates.
Don't worry,Go to VL06G,Execute it for delivery document,Here click define date,enter actual gi date.

I don't want to fill the Actual GI Date field automatically when GI

Hi experts
When I post good issue a delivery, Actual GI Date field is filled automatically.
I don't want it.
I don't want the Actual GI Date field to be filled automatically.
Please, let me know how to.
With config or user exit, anything possible.
Thank you.

Thank you for your reply Vinod.
But it's still not the exact answer I wanted.
1.
Subroutine USEREXIT_SAVE_DOCUMENT_PREPARE in MV50AFZ1 is not useful for this situation.
The field WADAT_IST(Actual GI Date) already has a value(today's date which is automatically inputted by system) in that subroutine.
So it's impossible to know whether Actual GI Date is manually inputted or not.
2.
The BADI you mentioned does not exist in our site.
Regards
Ji yeob

Schedule line date vs actual delivery date

Hi All,
Is there any standard report or work around available to compare customers schedule line date vs actual delivery date
Thanks & Regards,

Hi Abir,
I think your talking about a "On time Delivery report" to track actual delivery against the quoted delivery.
There is no standard report available in SAP for this.
This is hard to track if you have maintained multiple schedule lines for a one single line item.
(Where you maintain multiple delivery dates in schedule line level to quote multiple delivery dates. If you have maintained multiple line items to quote multiple delivery dates, this would have been easy)
Because you do your delivery based on your sales order line item. Not based on your schedule lines. Therefore in your delivery line item table (LIPS) you cannot see Schedule line number. Therefore you cannot compare quoted delivery against actual delivery date.
Assuming you have maintained your multiple delivery dates in Schedule line level, this is how you have to proceed.
- Use VL10E transaction to create delivery against schedule lines.
- Create append structure in the LIPS table to accommodate to carry the schedule line item of sales order in each delivery document + Line Item combination.
- Use this user-exit u2013include MV50AFZ1. Can save the particular sales order schedule line in the LIPS, earlier created append structure field.
Then you have the schedule line number available in the LIPS table, Now you can code your report to capture quoted delivery against actual delivery date.
Hope this helps you !
Anupa

How to actual material data in sales order

Hi,
i create an sales order (VA01) with 1 Material (say 300400). Now i can see, that some data (Gross Weight and Net Weight)
are not correct (empty).
Now i go in an new modus to MM02, change this fields and save this material.
Now i go back to the modus of sales order and will actual the data of 300400.
Is this possible? I have not find any way.
Thanks.
regards, Dieter

Hi Dieter,
You will have to maintain the gross and net weight in MM02. Then create a new sale order so that it will reflect.
It will not reflect for the old sale order. Do revert if any doubts.

Changing PO date to Actual GI date in Delivery from SALES ORDER(VA01)

THe Actual Requirement is...Whenever I create a SALES Order with PO date this PO date should automatically trigger in Actual GI date field in Delivery.
I just want to share my solution before I get some help from you Guys.. I have actually used a userexit MV50AFZ1. This was working fine for me when they are creating the order manually.
But the client's requirement is that.. it should work for automatic process.. this is nothing a FILE Is being send to SAP through MIDDLEWARE and IDOC get triggers with that... So the CLients wants when this process is happening he wants the PO date of the Sales order to be the ACTUAL GI DATE in Delivery.
Can you please help me out with this Aumatic Process...

Shivakumar,
U would need to check the inbound FM associated with the particular IDOC...you would need to make similar changes as you did in MV50AF71 to fulfill your requirement.
Regards
Anurag

Need to update the actual start date & time of a operation in workorder

Hi Experts,
I need to update the Actual Start date and Actual start time of a Operation of a WorkOrder through a Function Module.
I was looking into the BAPI_ALM_ORDER_MAINTAIN FM, but i couldn't find any field relating to the actual start date and start time of a operation.
Kindly Suggest me which Function module i can use to complete my task.
Thanks in Advance
bye

Hi,
It is system's standard behavior and no other MRP type will help you in moving the start date outside the planning time fence. With MRP type P3 new requirements are covered at the end of the fixing period, the end date is set and planed order is scheduled backword. Hence the start date will lie within the planning time fence.
Rgds,

Actual Finish date and time

Hii
How can we set the actual finish date and time to be logged at the time of Technical completion ??
Thanks and Regards
BK

BK,
The "Work ends on" field should be open for edit in IW41.
This field entry populates the "Actual finish date" in the operation when the "Final confirmation" flag is switched on in posting the time confirmation.
Check the settings in the IMG for: Set Field Selection for Completion Confirmation.
It sounds as though this has been set to "display only". There is no reason to have this control unless the system is set to enable posting in the future. Then folks would be able to cheat on their time.
The future date posting should only be switched on in development or test clients for test purposes.
However, from your description of the process, I would have expected the date and time to have defaulted as the current date and time.
Could there be a user exit at work?
We seem to have wandered away from the original question you were asking about setting the order "finish" date from technical completion. Were you refering to "Basic Finish Date"?
The configuration in Define Proposed Reference Time for Technical Completion can be configured to be Current, Created on, Basic start, Basic finish, but this relates to the reference date of the order.
Or are we on track now with the problem around the operation "actual finish date"?

Actual end date is not update after closing a change

Hi,
We are using SCSM 2012, now I want to make report on which changes have been closed in the last month. In som way all the changes that have been closed in SCSM do not have an actual end date, all the changes that I have imported from our old tool does. It
looks like SCSM does not update this field by itself, but I can't find a field in the change managment module in which I can provide the actual end date.
How does SCSM 2012 copes with this?
Kind regards, Marco Jansen

Hi Greg,
We are actually testing this now, as MS is not planning to solve this issue on a short term. The use of the last modified date is casuing u a lot of trouble now as we have had an change on our change form casuingthe last modified for all change to be set
to the date of the change. That was the end of my closing data.
We are now getting the WA in place from Netviaconsulting, but that is not a complete solution. Not all change reach a state of complete before they are closed. Sometime you will close a change that is cancelled ,rejected or failed. this means that when
triggering on an update of the record every update will set the actual enddate. Besides when setting the actual enddate on the status closed, the date is update every time the worflow runs.
We just want the actual enddate to be filled when a change comes to the status closed from any other status, but this sets the actual enddate on every status change of the change. in some strange way ewe cannot figure this out.
If anybody has the correct configuration for this workflow it would be very useful. Most prefereably MicroSoft in this case.

Enahancement to 2lis_02_scl, EBAN table extraction & Actual GI date

Hello Guyz
I need to extract 3 important fields into BI:
1. Committed date on the Purhcase Order Schedule Line (Field: DAT01, Table: EKET). This is not available as standard in 2lis_02_scl in LBWE. I can enhance the extractor and populate the field with USER EXIT. But I know that deltas might not get triggerred for this field? Is my assumption correct? If so, how can I extract this field and ensure that deltas will flow into BW?
2. EBAN extraction --> Purchase Requisition Release Date (Field: FRGDT, Table: EBAN): I need to obtain 'Purchase Requisition' information into BW. But there is no standard extractor available in ECC. Am I left with building a genric delta extractor or can someone suggest a better way?
3. Where is the Actual Goods Issue date stored for Purchase orders? In the EKET table we have GI date and GR date but there are planned dates. But we do have Actual GR date in 2lis_02_sgr... but this extractor is only built for Goods Receipts information? So how can I get Goods Issued information?
Please provide an answer to any/all of the above.
Thanks,
Srujan.

For your first question, you could do the below.
Assuming that the DataSource is delta capable, you can populate the new field data using 'Repair Full Load':
1. Create a View based on the base tables and EKET. Include the new fields along with the DSO key(s). Create a generic extractor based on the view. Write CMOD code to populate your new field. The CMOD code is as below. Test the extractor in RSA3 to make sure the records are being extracted. Replicate the DS in BW.
2. Create transformation for your Datastore with this new datasource. Create a full load Infopackage. Under the Scheduler tab of Infopackage, select 'Indicate request as repair request'. Schedule the IP. This will populate all historical data for your new fields without harming the deltas.
NOTE: If the record size if huge, you would want to limit the size using some filter criteria. For example, load the data only for a couple of years.
Once DSO is loaded and data activated, Infocube will automatically pick these delta records.
CASE i_datasource.
data: v_dat01 like EKET-DAT01.
l_tabix LIKE sy-tabix.
when '2LIS_02_SCL'.
LOOP AT c_t_data INTO wa_t_data.
l_tabix = sy-tabix.
SELECT SINGLE DAT01 into v_dat01 from EKET where <condition>.
if sy-subrc = 0.
wa_t_data-DAT01 = v_dat01.
MODIFY c_t_data FROM wa_t_data INDEX l_tabix.
endif.
For your second question, building a generic extractor will be ideal. Hope this helps.
-Mann

VL01N field Actual GI Date

Similar Messages

Maybe you are looking for