VL74 - Outputing E128 gives error

On VL74 (output from handling units) E128 output it shown.
Certain E128 outputs works fine whilst other do not work as follows :-
When using preview the following message is returned :-
Preview = Output could not be displayed (it may not be complete)
Message no. VN069
When trying to output the log shows the following error :-
Note: Log not from current processing run
Processing log for program RLE_EAN128_LABEL routine ENTRY
Check digit for value 1000013650 is incorrect -- 1000013656 would be correct
Message no. LE_SHP_BF_BARCODE016
Diagnosis
In certain circumstances, the handling unit does not have a SSCC number.
Procedure
Check in Customizing for the handling unit whether a SSCC number was assigned during number assignment to the packaging material type.
R/3 Customizing IMG -> Logistics - General -> Handling Unit Management -> Basics -> Define Packaging Material Types
Regards.
Phil.

Hi
Make sure you have maintained correct settings in below IMG:-
1) SSCC Generation Acc. to EAN128-->Maintain SSCC Generation for Each Plant / Storage Location
2) HUM>Basics>Technical Basics
3) And maintain the settings for Output determination for HU in NACE transaction
Rgds
Ramesh
Edited by: ramesh04 on Nov 29, 2010 5:40 PM

Similar Messages

My code not give error nut not give pdf report output

hi master
sir see my code not give error nut not give pdf report output
String reportSource = "./WEB-INF/reports/mfa.jasper";
String reportDest = "./reports/mfa1.html";
Connection conn = null ;
Statement msqlStatement = null ;
ResultSet mrs = null ;
Connection mconn = null ;
ExternalContext econtext = getExternalContext();
InputStream stream = econtext.getResourceAsStream(reportSource);
if (stream == null) {
throw new IllegalArgumentException("Unknown report name '" + reportSource
+ "' requested");
try {
String mfat = ac_categoryDataProvider.getCachedRowSet().getDataSourceName();
javax.naming.Context mctx = new javax.naming.InitialContext() ;
DataSource mds = (DataSource)mctx.lookup(mfat);
Connection mcon= mds.getConnection();
mcon.setAutoCommit(false) ;
JasperPrint jasperPrint = null;
//getSessionBean1().getTripRowSet(),
//getSessionBean1().getAc_categoryRowSet(), mfat getSessionBean1().getAc_categoryRowSet()
jasperPrint = JasperFillManager.fillReport(stream, null,mcon);
JRExporter exporter = null;
HttpServletResponse response = (HttpServletResponse)econtext.getResponse();
FacesContext fcontext = FacesContext.getCurrentInstance();
exporter = new JRPdfExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_STREAM,
response.getOutputStream());
exporter.exportReport();
fcontext.responseComplete();
} catch (Exception ex) {
log(" Error Description" , ex);
error("Error counting rows: " + ex.getMessage() );
error("Error counting rows: " + ex );
please give me idea
thank's
aamir

Thanks Sven.
The query works but the other way. The output is for all the targets, not for the respective target which we select from :p1_target.
select target_name,target_type, column_label,
warning_threshold,critical_threshold,occurrence_count
from sysman.MGMT$TARGET_METRIC_SETTINGS@crmodem
where target_name in (select MEMBER_TARGET_NAME from MGMT$TARGET_FLAT_MEMBERS@crmodem
where upper(AGGREGATE_TARGET_NAME) like '%X' || :P1_TARGET || '%')
Thanks again.

GI installtion gives error while executing root.sh for ASM diskgroup

Dear Gurus,
We are implementing a 2 node RAC configuration with ASM on vmware and openfiler on LINUX RHEL 6.2. We started our installation with grid infrastructure. While executing root.sh on node 1 it gives error diskgroup cannot be mounted and no alterntions perfomed as below.
+[main] [ 2012-10-04 05:38:33.150 PDT ] [UsmcaLogger.logException:173] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:mountDiskGroups+
+[main] [ 2012-10-04 05:38:33.151 PDT ] [UsmcaLogger.logException:174] ORA-15032: not all alterations performed+
ORA-15017: diskgroup "CRS" cannot be mounted
ORA-15088: diskgroup creation incomplete
+[main] [ 2012-10-04 05:38:33.338 PDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15032: not all alterations pe+
rformed
ORA-15017: diskgroup "CRS" cannot be mounted
Note:- we are not using ASMLib. We presented the LUN's to oracle binaries with Multipathing.

Put here relevant info of alertlog of ASM and CRS.
Please format your text by using tag at begin and end of output.

Premiere Pro stops rendering and gives error message when encounters "RGB Color Corrector"

Premiere Pro (and also Encore) stops rendering and gives error message when it encounters a clip containing the "RGB Color Corrector" in any clip. It will process clips without RGBCC, but will stop when it gets to one with RGBCC activavted. PP will render clips if other effects, such as "Fast Color Corrector", "Color Balance (HLS)", and "Three-Way Color Corrector" are selected. However, these do not have the capabilities that The other color correctors will not do what RGB color corrector does, so I need to have this working to finish a large product that is due to the client. Please help me..... I am not using the Creative Cloud version, and can't find either a download for the new update from 2013, or a phone number to talk to anyone.

Using a Win7 computer with 2.8 quad core processor, 24 gig of ram, Nvidia Quadro 5000 video card. Don't think I have any plugins. I looked at one a while back for cleaning up grainy video, but I am not sure I paid for that. Think I deleted it.
Incidentally, someone named Jim on another part of the forum mentioned that this problem has been fixed in the CC version of the program. I am using the non-CC version because I am 68 years old and only do seminars and documentation video. Don't need so many bells and whistles, and definitely don't need learning curves every few weeks. CS6.0.3 works fine for me. By the way, someone else said that maybe version 6.0.1 might work better and I should revert to that. Not sure if it is the version i have on the disk upgrade to 5.5 that I purchased in December.
As it stands now, I have 7.5 hours of a seminar that is ready to go out the door. If there is an upgrade I can get from Adobe, maybe you can tell me about it. If I have a setting incorrect in the video output format, maybe I can change that. So far it just happens with clips in my video that have RGB color correction.
Rick

Lpq outputs print jobs + error T: unknown: moving-to-paused +

Dears,
I have setup remote printing, printing from the client show the print queue at print server(T) however command does not get executed and it outputs
print jobs + error "T: unknown: moving-to-paused"
When is triggered lpstat command before printing
# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T is idle. enabled since Sun Feb 19 12:03:31 2012. available.
When is triggered lpstat command After printing
bash-3.2# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T waiting for auto-retry. available.
Failed to open the printer port. (Device busy)
T-80 [email protected] 201097 Feb 19 12:28 f iltered
T-81 [email protected] 600569 Feb 19 12:28 f
lpq
===
bash-3.2# lpq
T: unknown: moving-to-paused
Rank Owner Job File(s) Total Size
1st appltest 80 /global/u02/oracle/TEST/inst/app201097 bytes
2nd appltest 81 /global/u02/oracle/TEST/inst/app600569 bytes

Hi Freind,
I hope you are doing good.
Q1l:-
Are these printers really physically attached to your Ultra-* parallel port (/dev/ecpp0)?
and what device is "/dev/lp1"?
Answer:-
"/dev/lp1" which is printer "T" and "/dev/ecpp0" which is printer "Alis" are configured at OS level via "printmgr" on the same machine.
This machine hostname is "tprinter" which is a print server. It is connected physically to "CIMA6120 LINE PRINTER".
[what I meant is: what physical port is this printer attached to on the Solaris machine? is this a Ultra 5/10/60 machine? I don't recall the /dev/ecpp port
existing on any modern sun hardware]
"failed to open printer port" can mean:
Answer2:- It's is a 25 pin serial port cable connected to 25 pin parallel port of Optiplex GX100 machine. I installed solaris 10 x86 to make print server. as our CIMA6120 its not a network printer, and our company want to print reports from oracle application to this printer.
Q:-you have attached your printer to the wrong port?
Answer: it is connected to the correct port.
[again . . how do you know this or test this?]
Answer2:- it is connected at the rare panel of the machine on a 25-hole connector (bidirectional).
Q:-you have attached your printer to the right port, but are using the wrong name?
Answer: I think we could have Alias, not necessarily give the same printer name.
[what i was getting at here is that you think the printer is attached to the parallel port, but actually the cable
is actually attached to the wrong port. For example the serial port on those older machines will fit but in that case, if you configure the printer with ecpp
it's not pointing to the correct port]
Answer2:- I configured CIMA6120 with "/dev/lp1" port which was perfectly working, I print numerous pages with this configuration, Suddenly this error "moving-to-paused" occurred. as i said it is connected to the parallel port at the rare panel. Initially, I attempted and tried to configure this printer with "/dev/ecpp0" port which was not successful.
Q:-you have a bad or wrong cable?
Answer:- I have checked the cable it is good.
[how did you do the checking?]
Answer2:- I tested the cable by connecting to other printer and it printed. so no problem with the cable.
In the olden days when local printers like this was the norm, we'd do test like catting a file to the port and see if the printer lights
up or responds. Something like: cat /etc/hosts > /dev/ecpp0 (or /dev/lp1, or whatever the device is). Then observe if the printer seems to
receives anything, blinks, prints the host file. You are copying the file directly to the port outside of lp or other mechanism.
Answer2:- I agree there was some conflict among the ports internally, or some process may be running at the background, that is why though it shows the request waiting in the queue it was moving to pause for some reason. when I check the error by command "lpstat -t" it sez "device busy" in /dev/lp1" file.
Solution
============
After goggling some more I found a fix for this issue at http://fixunix.com/solaris/143011-unaccepted-printer.html
1, I tried to remove the printer from printmgr, cud not remove it.
2, try kill the entries that going to /dev/lp1 port to printer "T". could not do it
3, uncheck the default printer option via printmgr.
4, Add a new printer name "test" with /dev/ecpp0" and reproduce the issue "got the same error"
5, With the forum above it sez its a "bug" and the Bug ID: 6374608. here are the details of it:-
Synopsis: No /devices entry for line printer
http://bugs.opensolaris.org/bugdatab...bug_id=6374608
Workaround is to manually install the missing driver binding
entry, using the command:
update_drv -a -i '"lp"' ecpp
This workaround should create the missing /dev/lp* devices. And after
running it, you should find the following line in "prtconf -D" output:
lp, instance #0 (driver name: ecpp)
6, I unplug the serial cable from the printer and turnoff and replug the serial cable to the printer and turn on the printer, made sure printer is ""ONLINE".
7, I restart the Solaris machine and delete the newly created "Test" printer via printmgr.
7, I just gave the lp /etc/passwd and it printed.
Finally, I thank you for your time and suggest me your opinion on this solution please.
Regards,
MKY
Edited by: user9007339 on Feb 22, 2012 12:15 AM
Edited by: user9007339 on Feb 22, 2012 12:21 AM

J2EE server gives error when i start it.

Hi, I am Fahad. I installed j2sdkee in the directory c:\javalanguage\j2ee\j2sdkee1.3 and j2sdk at
c:\javalanguage\jdk1.3
I am using the latest version of j2sdkee produced by sun and jdk1.3
I have set the JAVA_HOME and J2EE_HOME path as prescribed by the sun.
My platform is Windows2000 professional.
When I start the server writing j2ee it gives me the following list of errors and the server doesnot start.
c:\javalanguage\j2ee\j2sdkee1.3\bin>j2ee
No local string for j2ee.listenPort
J2EE server listen port: 1050
No local string for enterprise.log.logging.serverversion.started
No local string for enterprise.log.using.vm.name.version.from
No local string for enterprise.log.vm's.classpath
No local string for enterprise.log.j2ee.homedirectory
No local string for enterprise.log.loggin.serverversion.started
No local string for enterprise.log.using.vm.name.version.from
No local string for enterprise.log.vm's.classpath
No local string for enterprise.log.j2ee.homedirectory
Redirecting the output and the error stream to the following files:
c:\javalanguage\j2ee\j2sdkee1.3\logs\fahad\j2ee\j2ee\system.out
c:\javalanguage\j2ee\j2sdkee1.3\logs\fahad\j2ee\j2ee\system.err
c:\javalanguage\j2ee\j2sdkee1.3\bin>
I am very tense and trying to start it since two days. Can anybody help me and explain what's wrong with that. thanks
Fahad Ahmed

Hi fahad !
i know this is common problem when u put j2ee.jar from ee sdk to ur local jdk extension ...now wht u have to is ...remove j2ee.jar from ur jdk's extension and restart the system..then simply start jdkee again .. i m sure no error will be waiting for u :)
Truly,
siddiquiHashim
smartSolutions

ASMCA gives error

Oracle 11.2.0.2
Standlone database with ASM. Grid infrastructure is installed.
While trying to create ASM instance with the help of asmca in grid home it gives error and generates below log file.
ORA_CRS_HOME is set equivalent to the gird installation directory.
Error in the log file is
[main] [ 2012-10-12 12:55:27.471 EDT ] [RuntimeExec.runCommand:161] RunTimeExec: output>
[main] [ 2012-10-12 12:55:27.472 EDT ] [RuntimeExec.runCommand:164] /oracle/app/11.2.0/grid
[main] [ 2012-10-12 12:55:27.472 EDT ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2012-10-12 12:55:27.473 EDT ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2012-10-12 12:55:27.473 EDT ] [HAUtils.getCRSHome:546] Configured CRS/HAS home = /oracle/app/11.2.0/grid
[main] [ 2012-10-12 12:55:28.312 EDT ] [UsmcaLogger.logInfo:141] Can't exec "/oracle/app/11.2.0/grid/bin/clsecho": No such file or directory at /oracle/app/11.2.0/grid/lib/acfslib.pm line 937.
[main] [ 2012-10-12 12:55:28.370 EDT ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2012-10-12 12:55:28.371 EDT ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2012-10-12 12:55:28.371 EDT ] [HAUtils.getCRSHome:546] Configured CRS/HAS home = /oracle/app/11.2.0/grid
[main] [ 2012-10-12 12:55:28.372 EDT ] [HAUtils.getHASHome:613] returning configured HAS Home: /oracle/app/11.2.0/grid
[main] [ 2012-10-12 12:55:28.372 EDT ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
Edited by: 965132 on Oct 13, 2012 5:06 AM

Did you configured and activated Oracle Restart?
If not... To activate it follow this tasks:
Run the roothas.pl script from Grid_home as root user using the following syntax:
Grid_home/perl/bin/perl -I Grid_home/perl/lib -I Grid_home/crs/install Grid_home/crs/install/roothas.pl
## For example, if your Oracle Grid Infrastructure home is /app/11.2.0/grid, then run the following script:
$ /app/11.2.0/grid/perl/bin/perl -I /app/11.2.0/grid/perl/lib -I /app/11.2.0/grid/crs/install /app/11.2.0/grid/crs/install/roothas.plhttp://docs.oracle.com/cd/E11882_01/install.112/e24321/oraclerestart.htm

Sampsperchantoacquire =1 gives error -200077

using either DAQmxCfgSampClkTiming or DAQmxCfgImplicitTiming and setting SampsPerChantoAcquire to 1 gives error code -200077
I want to sample 6 channels exactly once as fast as possible - how should I do this?
Thanks!

Hello Britt,
You can use the basic structure of OneSample as a guideline and simply add on however many more channels you require (in this case 5 more). You would do this using the DAQmxCreateAIVoltageChan() function. The NI-DAQmx C Reference Help describes this function as follows:
DAQmxCreateAIVoltageChan
int32 DAQmxCreateAIVoltageChan (TaskHandle taskHandle, const
char physicalChannel[], const char nameToAssignToChannel[], int32
terminalConfig, float64 minVal, float64 maxVal, int32 units, const char
customScaleName[]);
Purpose
Creates channel(s) to measure voltage and adds the channel(s) to the task
you specify with taskHandle. If your measurement requires the
use of internal excitation or you need the voltage to be scaled by excitation,
call DAQmxCreateAIVoltageChanWithExcit.
You would simply call this function with the same taskHandle you are already using and list whatever channels you want as the physicalChannel[] input parameter. Also, as noted in the NI-DAQmx Help, the physical channel syntax can be used for a single channel or a range of channels. As described in this manual:
Physical Channel Syntax
<script type="text/javascript">
</script>
Use this syntax to refer to physical channels and groups of
physical channels in NI-DAQmx.
Physical Channel Names
Physical channel names consist of a device identifier and a slash
(/) followed by a channel identifier. For example, if the physical channel is
Dev0/ai1, the device identifier is Dev0, and the channel identifier is ai1. MAX assigns device identifiers to devices in the
order they are installed in the system, such as Dev0 and Dev1. You also can
assign arbitrary device identifiers with MAX.
For analog I/O and counter I/O, channel identifiers combine the
type of the channel, such as analog input (ai), analog output (ao), and counter
(ctr), with a channel number such as the following:
ai1
ctr0
For digital I/O, channel identifiers specify a port, which
includes all lines within a port:
port0
Or, the channel identifier can specify a line within a port:
port0/line1
All lines have a unique identifier. Therefore, you can use lines
without specifying which port they belong to. For example, line31—is equivalent to port3/line7 on a device with four 8-bit ports.
Physical Channel Ranges
To specify a range of physical channels, use a colon between two
channel numbers or two physical channel names:
Dev0/ai0:4
For digital I/O, you can specify a range of ports with a colon
between two port numbers:
Dev0/port0:1
You also can specify a range of lines:
Dev0/port0/line0:4
Dev0/line0:31
You can specify channel ranges in reverse order:
Dev0/ai4:0
Dev0/port1/line3:0
Physical Channel Lists
Use commas to separate physical channel names and ranges in a list
as follows:
Dev0/ai0, Dev0/ai3:6
Dev0/port0, Dev0/port1/line0:2
The implementation in which you specify 2 samples per channel in DAQmxCfgSampleClkTiming is probably not the best implementation. If you continue to specify 2 samples to read and then only pull 1 sample from the buffer in DAQmxReadAnalogF64 you will eventually overflow the buffer on the device. Also, you will not "lose" data, but I don't think you are getting the data you expect. The DAQmxReadAnalogF64 function will read the oldest available sample from the device; this isn't a problem when you are reading all the data that is in the buffer every time. However, in your implementation, you will be getting old data when you expect more recent. The figure below should demonstrate the problem with this scheme. The arrows represent the data that you are reading with the DAQmxReadAnalogF64.
This behavior is the default setting for the NI-DAQmx driver, but you can change it using the RelativeTo property. The description of this property is as follows:
RelativeTo
Data Type:
int32
Description:
Specifies the point in the buffer at which to begin a read operation. If you
also specify an offset with Offset, the read
operation begins at that offset relative to the point you select with this
property. The default value is DAQmx_Val_CurrReadPos unless you configure a Reference Trigger for the task. If you configure a Reference Trigger, the default
value is DAQmx_Val_FirstPretrigSamp.
Valid values
DAQmx_Val_FirstSample
10424
Start reading samples relative to the first sample
acquired.
DAQmx_Val_CurrReadPos
10425
Start reading samples relative to the last sample returned by
the previous read. For the first read operation, this position is the first
sample acquired or the first pretrigger sample if you configured a reference
trigger for the task.
DAQmx_Val_RefTrig
10426
Start reading samples relative to the first sample after the
reference trigger occurred.
DAQmx_Val_FirstPretrigSamp
10427
Start reading samples relative to the first pretrigger
sample. You specify the number of pretrigger samples to acquire when you
configure a reference trigger.
DAQmx_Val_MostRecentSamp
10428
Start reading samples relative to the next sample acquired.
For example, use this value and set Offset to -1 to
read the last sample acquired.
You can get/set/reset this property using:
DAQmxGetReadRelativeTo
DAQmxSetReadRelativeTo
DAQmxResetReadRelativeTo
However, in your implementation, you would still face problems with overflowing the buffer. Instead, I would recommend that you read all available samples and either average the data or just discard the samples that are not applicable.
Finally, to address your question regarding the sample rate in DAQmxCfgSampClkTiming, the sample rate is accurate down to the specifications of the device you are using. The USB-6008/6009 User Guide here provides the following specification:
Timing accuracy..................................... 100 ppm of actual sample rate
The NI USB-621x Specifications here indicates:
Timing accuracy..................................... 100 ppm of actual sample rate
Message Edited by Matt A on 07-11-2007 10:39 AM
Matt Anderson
Hardware Services Marketing Manager
National Instruments
Attachments:
Dev Range Reverse.JPG ‏2 KB
DAQmx Read.JPG ‏13 KB
Dev Range.JPG ‏3 KB

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

ITunes new version doesn't open at all. Gives error message

I downloaded 7.4.3 version of iTunes and it doesn't open at all. Gives error message. "iTunes has encountered a problem and needs to close."
I have previous version of iTunes in my spare HD, in the same computer, and it works perfectly fine.
I have unistalled and re-installed again and again many times including with the help of Apple Support help in the phone and came up with no clues of what's going on.
How can I get a previous version of iTunes to download to my PC? I have looking for a place on Apple's website where I could probably have my issue resolved, but I found nothing.
Thank you.

Thanks to Jim Zack, the problem is solved.
If you're having this problem, go find the solution at the following page and read Jim's suggestion.
http://discussions.apple.com/thread.jspa?threadID=1155613

Report server gives error

i have installed oracle 9i AS (EE)on NT,
Now i want to display reports in pdf/HTML on web broswer. For that i am trying to run report tester page given through broswer it is showing one page having Button(run report), when i click on that, it gives error unable to connected to database, and request rejected by report server. WHY ???
i want to display reports through JSP How it can be done? Does anybody knows it?
Naresh
null

Please check at http://<server>/dev60html/runrep.htm for follwings :
01. your test.rdf must be in report60 folder
02. your db must contain scott user
03. connect string must be tested and give the same inplace of test
04. your webhost may contain a dot, please check this should be the same as yours
hope this will help
bye !

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

VL74 - Outputing E128 gives error

Similar Messages

Maybe you are looking for