VM creation on a cluster fails with Internal error code: 0x80990C1D

I am getting the following error when creating a VM from template on a 2012 R2 cluster:
Error (3101)
VMM failed to mount virtual hard disk (VHD) file XXXX.vhdx on the XXXX server. A timeout occurred.
Internal error code: 0x80990C1D
Recommended Action
Open Services to make sure the startup type for Virtual Disk service is set to manual or automatic. Ensure that the service can start and then try the operation again.
The errer occurs while running "Install VM Components" task. I did check services on the host and all is running as expected. The same template works without problem on non-clustered hosts, but fails two out of three times on HV cluster with
CSV storage on FC SAN. I am running SCVMM 2012 R2 UR3.
Any ideas what may cause this issue?
Thanks
Gleb.

Hi,
it's a strentgh issue. I don't have any certain information on the hand but I am just thinking out loud now. Maybe it helps.
If it fails at "Install VM Components" this would mean that the problem occurs during injecting or ejecting the integration services. I am right now not sure if VMM injects the integration services as an ISO file or as an vhd file. The second option is also
possible.
From this point of view my question would be;
1) Are you creating the VM from a blank disk with an ISO OS file attached ? If yes
2) Are you experienceing the same problem with an syspreped vhd or vhdx file too ?
3) How many VM's are running on your Cluster Nodes ?
4) Are there any differences in the behavior when you select a different cluster node as destination host during the creation of a VM from template ?
5) What's the workload on your cluster nodes right now disk, memory, cpu ?
Regards,
Cengiz Kuskaya

Similar Messages

Installation fails with "internal error 2502"

I have a client running Windows Vista Home Premium Edition (32 bit) and my app's CVI-built installer fails with "Internal Error 2502".
This installation kit has been successfully deployed on hundreds of computers with various versions of Windows and I have never seen this one. No device drivers or advanced libraries - just the standard runtime. I use CVI 9.0.1.
Searches reveal very little - some old issues with Office installation, date/time settings etc. but I have yet to find anything that indicates what this error represents.
Any insights or ideas very welcome.
Thanks,
Ian
Solved!
Go to Solution.

That appears to be a Windows Installer (MSI) error, and can have many different causes. Can you confirm that anyWindows installers (perhaps try newest Adobe Reader) work on that system? Is the system's date/time set correctly? Could there be a permissions restriction with C:\Windows\system32 or C:\Programs\National Instruments\Shared?
I'd also try doing an internet search for "installer error 2502" and see what other tips you might find. If all else fails, try running the installer from the command line like this:
setup.exe /log install_log.txt
That will generate a log file that might contain a hint for us.
Mert A.
National Instruments

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
 Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
 If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspaces

during install OCS Infrastructure DB OCS have error:
... processed key-value: logfile=/oracle/product/dbocs/workspaces/logs/cw_config_backend.log
... processed key-value: action=setup_backend
... processed key-value: oh=/oracle/product/dbocs
... processed key-value: oid=oid.domain
... processed key-value: oid_port=389
... processed key-value: oid_user_dn=cn=orcladmin
... processed key-value: oid_passwd=xxxxxx
... processed key-value: db_sn=ocs.domain
... processed key-value: dba_user=sys
... processed key-value: dba_passwd=xxxxxx
... processed key-value: cw_db_passwd=xxxxxx
Attempting to set logfile to: /oracle/product/dbocs/workspaces/logs/cw_config_backend.log
Processed oh=/oracle/product/dbocs
BACKEND installation ...
... Trying to lookup database dn
... Obtain OID connection
...... Can not obtain OID ssl port.
...... OID port = "389"
...... Trying to establish a non-ssl connection. OID host "oid.domain", OID port "389", OID user dn "cn=orcladmin".
... OID connection created.
...... You must specify either db_dn or db_sn.
...... ldap search filter "(&(objectclass=orcldbserver)(orcldbglobalname=ocs.domain))"
...... Succesfully located database dn "cn=ocs,cn=OracleContext".
...... Database dn = "cn=ocs,cn=OracleContext"
... Validating existence and version of CW schema: "CWSYS" in database: "cn=ocs,cn=OracleContext".
... Obtain JDBC connect string
... JDBC connect string = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
...derived: "jdbc_str=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))".
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
Unlocking schema and setting passwd: "CWSYS/xxxxxx".
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
... Checking Workspaces container.
... Container "cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext" already exist.
... Finish checking Workspaces container.
... Trying to create backend application entity in OID
...... Database dn = "cn=ocs,cn=OracleContext"
...... Backend entity name = "ocs"
...... Backend entity dn = "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
... Backend entries already exist. Cleanup old entries.
deregisterProvisioningListener ...
app dn = orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext
subscriber = dc=domain,dc=com
... Trying to remove entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext".
... Deleting "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
Adding Workspaces application entity to: cn=Service Registry Viewers,cn=Groups,cn=OracleContext
Adding Workspaces application entity to: cn=Service Registry Admins,cn=Groups,cn=OracleContext
... Insufficient privilege to create application entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext". Please check the user DN and password.
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
oracle.workspaces.install.CwCAException: Error while executing action: "setup_backend"
Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]
at oracle.workspaces.install.CwConfig.run(CwConfig.java:639)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
... 1 more
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
What should i do?
help.
Thanks

closed
Re: Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspac

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

VPN error - Function CreateFile failed with an error code of 0x00000002

I got an error when connecting VPN, detailed messages are attached. I am using administrator to log on. The issue is there after I run a virus clean activity. Any help is appreciated.
Cisco Systems VPN Client Version 4.6.04.0043
Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 2
1 15:16:21.625 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
2 15:16:22.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
3 15:16:23.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
4 15:16:23.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
5 15:16:24.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
6 15:16:24.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
7 15:16:25.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
8 15:16:25.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
9 15:16:26.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
10 15:16:26.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)

Please see my post in the IPsec and Firewall forum.

At DI R3trans fails with this error code ORA-12545, but CI runs

Hello Gurus,
We have our BW System on two instances with a separated oracle database server.
Last week the system was unreachable and we must restarted it hard.
After that, the Listener could started and runs. The DB could started, mounted and opened successfully.
Now we have a special problem.
The central instance can connect at startup to the database. But the dialog instance not.
The DI get the following error:
|> R3trans -x
This is R3trans version 6.14 (release 701 - 12.06.09 - 15:20:00).
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
R3trans finished (0012).
The trans.log entry are:
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12541'                        17 0.187511
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 12541                                    13 0.187524
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con_hdl=0, rc=12541)                                   14 0.187538
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 12541                                   14 0.187552
4 ETW000 [dev trc     ,00000]     ORA-12541: TNS:no listener
4 ETW000                                                                                22 0.187574
4 ETW000 [dblink      ,00433] ***LOG BY2=>sql error 12541 performing CON [dblink#4 @ 433]           14396 0.201970
4 ETW000 [dblink      ,00433] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#4 @ 433]                   39 0.202009
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
A telnet connection test to port 1527 are also unsuccessful.
But sporadicly the telnet or R3trans connection are successful, but the second check are unsuccessful.
We have checked the telnet connection to another oracle database server (ERP) at port 1527 and it works.
The CI have some entry's in ST22 with DBIF_RSQL_SQL_ERROR --> ORA-03114: not connected to ORACLE.
Are someone known something about this issue?
regards
Chris

@ Sunny Pahuja:
We checked sapmnt.
Sapmnt is common on CI and DI. It was never mounted on DB. But DB runs perfectly until this issue.
@ Ankit Gupta
We checked the configuration of listener.
It is the same like the listener configuration of our ERP system with CI, DI and DB on separate Servers, too.
@ Rajesh Narkhede
From DB Server
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 07:40:56
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/BW2/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
OK (100 msec)
On CI and DI we don't have tnsping.
Just copy it don't work.
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 08:39:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Message 3511 not found; No message file for product=network, facility=TNS
Message 3512 not found; No message file for product=network, facility=TNS
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
Message 3509 not found; No message file for product=network, facility=TNS
How to get it on the CI and DI. In the SAR files at SAP it is not included. I can't found something in the Web.

Pthread_create() fails with no error code

Hi,
following piece of code works well under Linux and is used to create a new thread:
rc=pthread_attr_init(&tattr);
rc=pthr ead_attr_setdetachstate(&tattr,PTHREAD_CREATE_DETACHED);
rc=pthread_create(&thread1,&tattr,&WatchdogThread,(void*)&MyPID);
Here the call of pthread_create() fails with a return code of -1 but errno is 0 so that I don't have an idea what the problem could be.
Does anybody have an idea?
Kind regards
Oxy

#define _REENTRANT
#include <stdio.h>
#include <pthread.h>
#include <errno.h>
void*
func(void *arg)
 return arg;
main()
 int rc;
 pthread_t tid;
 errno = 0;
 rc = pthread_create(&tid, NULL, func, NULL);
 printf("rc=%d, errno=%d\n", rc, errno);
}The above test progam works for me when I compile it with
% gcc -o p p.c -lpthread
% p
rc=0, errno=0Omitting the -lpthread reproduces something similar to you problem (reason: the empty pthread stub
subroutines from libc.so are used):
% gcc -o p p.c
% p
rc=-1, errno=0

CUCM 8.6.1 Refresh upgrade to 10.5 fails with Internal Error (Function: ipmReadNormalizedInputLine) [SOLVED]

Hi,
we are upgrading our CUCM 8.6.1 to 10.5.1 on VMWare Enviroment (vSphere 5.5 running on UCS).
We are running this upgrade in a sandbox, in order to avoid any problem in the production cluster.
We followed the refresh upgrade guide ( http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.pdf)
Pre-configuration steps
Take a clone of the running publisher and put it in the sandbox
Remove DNS servers (they are not available in the sandbox)
Change the NTP Server with a ntp that is recheable from the sandbox
Check that Gateway and NTP connectivity are OK for the CUCM
Pre-upgrade:
Run the cop files to update keys and increase disk space (log partition is 80% full)
Shutdown the CUCM VM and
Increase disk space on the VM configuration
change VM OS from RedHat5 (32bit) to RedHat 6 (64bits)
change VM nic from flexible to VMNIX3
Restart the VM
Upgrade
1. mount the iso
2. connect to OS Administration web interface and perform the Software installation from CD/DVD
3. upgrade process works fine up to the post-installation task
During post-installation tasks (after completing the DB Load and Transforming Copy) the Upgrade process always fails fails with an internal error
IPM|Internal Error, File:ipm.c:2011, Function: ipmReadNormalizedInputLine(), "/usr/local/cm/script/cm-dbl-install RU PostInstall 10.5.1.10000-7 8.6.1.21019-1 /usr/local/cm/ /common/component/database /common/log/install/capture.txt " failed (1)|<LVL::Critical>
IPM| end-of-session "Installing database component": 1109.369 secs.|<LVL::Info>
IPM|Close progress meter "Component Install"|<LVL::Info>
We also tried the intermediate steps:
- upgrade from 8.6.1 to 9.1 : worked
- from 9.1 to 10.5: Failed with the same error
- from 9.1 to 10.1: Failed with the same error
any help will be greatly appreciated, thanks
Stefano

Issue was related to Dial Plans, the logs showed
16:45:46.204 | DBUtil::BlockCopyTable ### *ERROR* ###: (diagnosis): Bulk Data Migration for table availdialplan failed due to data constraint issue, (-971).
16:45:46.611 | DBUtil::BlockCopyTable *
16:46:16.555 |*ERROR* Error fetching column information: [Informix][Informix ODBC Driver][Informix]Could not position within a table (informix.systables).
16:46:16.588 | DataConverter_5to6::CopyTables *ERROR* BlockCopyTable failed to process table (availdialplan)
16:47:52.395 | installFull *ERROR* Prior Cancel or Error Processing convert5to6()
Cisco TAC fixed by updating the primary key in the DB.
After the fix we were able to perform the RU as expected.

Fingerprint reader failing with internal error - 0x800106BB

My fingerprint reader worked once I put the proper software in. But only once. The second time I tried to get in, I got the following: "An internal error occurred (bpwb: bp-wb-dpi-ed-wbeba (800106BB)" When I went onto the internet and searched on that error, it appears to be a known problem with Windows 7 (fixed in win8) with the following description: "Not enough RPC threads". Is this a hardware problem or a software problem? Lenovo is telling me to return my Thinkpad E540 to be fixed. Since I am going on a cruise in 20 days and planned to bring this laptop with me, I'm concerned.

Hi Sharath,
I have selected all of them, clicked on publish, the I got a message saying "choose an ITS for publishing"
Using the message in performance assistant,
In se80, Utilities->settings, On the ITS tab under Publish choose the ITS server,
However, here the only options are
1. on all defined sites,
2. on selected site, print
3. to local directory.
Here, I have selected on all defined sites.
Got the message "Object published successfully; site All Defined Sites"
How to proceed further?
Thanks,
Vishi
Edited by: sap.technical on Mar 9, 2010 6:15 AM

Compressor failing with no error code

So I've looked in the forums but haven't found anyone with this exact problem. I'm running FCS 1 v.5.1.4 & Compressor 2.3. I have a project that is HD 960x720, at 23.98 fps. I've used compressor on this project several times before with no problem, but this time when I submitted my batch, it runs for about 1800 frames, then fails. It doesn't give me any error code. If I hit the "Info" button, it says- percent complete:100 Batch: "Failed:"
I tried resetting background processes; that didn't help. I tried closing any other open sequences. I've restarted my computer, then actually shut it off for about 20 min. I still have the same problem. I haven't updated anything in months. I went into the Logs and found this in the compressor log:
preProcess for job target: file://localhost/Users/draennajackson/Desktop/Subtle%20Seduction%20copy-Subtle%2 0Seduction-MPEG-2%205.0Mbps%201-pass%2016:9.m2v
done preProcess for job target: file://localhost/Users/draennajackson/Desktop/Subtle%20Seduction%20copy-Subtle%2 0Seduction-MPEG-2%205.0Mbps%201-pass%2016:9.m2v
starting _processRequest for job target: file://localhost/Users/draennajackson/Desktop/Subtle%20Seduction%20copy-Subtle%2 0Seduction-MPEG-2%205.0Mbps%201-pass%2016:9.m2v
MPEG-2 Encoder Settings (v533)
Stream Type: MPEG-2 Video Elementary
Frame Dimensions: 720x480
Frame Rate: 29.970030 progressive, pulldown from 23.976025
Aspect Ratio: 16:9
Video Format: NTSC / SMPTE 170M
GOP Pattern: 12/3 closed IBB
Rate Control: 1-pass VBR 5000000 bps target, 7500000 bps max
Motion Estimation: l2orig+l0mbloop+smoothing+pnofieldbnofield
Search Range: 16x16
RD Optimization: none
Flags: 0x2
Visual Masking: on
Intra DC Precision: 8-bit
Quant Scale Mode: auto
Intra VLC Mode: auto
Coef Scan Mode: auto
Quant Matrix: 1
Segment Type: last
I-Frame Markers: { 72 153 230 254 267 332 419 486 543 705 775 1020 1091 1122 1286 1422 1547 1652 1877 1878 2012 2157 2300 2447 2588 2729 2867 3010 3172 3315 3448 3583 3598 3601 3999 4192 4261 4330 4362 4411 4520 4557 4700 4751 4865 5407 5526 6565 7900 8027 9490 9815 10191 10368 11344 11368 11373 11467 11667 11811 11905 12137 12215 12249 12405 12652 12715 12867 12948 13018 13126 13371 13629 14068 14384 14431 14458 14500 14558 14583 14584 14624 14704 14883 14993 15258 15859 16282 16374 16449 16581 17367 17748 17931 18308 18410 18603 18740 18971 18986 19109 19206 19288 19452 19506 19633 19665 19724 19756 19776 19855 19926 19947 19962 19999 20107 20121 20161 20214 20258 20310 20388 20427 20595 21390 21465 22787 22923 23261 23346 23464 23607 23650 23702 23734 23801 23854 23896 24334 24823 24891 25058 25336 25374 25660 25808 25922 25994 26218 26356 26566 26897 27251 27275 27298 29592 30449 30624 30748 30757 30797 30894 30969 31026 31224 31327 31657 32128 32223 32252 32304 32968 34594 34618 34631 34921 35036 35391 35666 35798 35885 36047 36153 36174 36195 36361 36413 36454 36504 36652 36681 36733 36819 36934 37200 37271 37379 37555 37714 38064 38077 38133 38222 38412 38524 39131 39359 40409 41697 41772 42122 42275 42449 42558 43093 43459 44079 44504 44798 44971 45195 45897 46021 46325 46811 46960 47006 47048 47117 47150 47364 47470 47494 47593 47676 48149 48227 48393 48541 48585 48867 48919 49003 49057 49080 49721 49906 50053 50138 50204 50247 50315 50361 50395 50453 50526 50622 50810 50874 51026 51102 52421 52921 53008 53837 54980 58924 59336 59405 59599 59649 59680 59800 60401 60719 62652 62929 63134 63295 63528 63555 63562 63678 63947 64004 64192 64238 64269 64454 64475 64527 64699 64727 64808 64916 65042 65145 65245 65346 65540 66199 66699 66753 66786 66818 66890 66979 67005 67035 67107 67157 67270 67331 67380 67427 67526 67875 68021 68055 68119 68273 68340 68474 68489 68526 68569 69037 69096 69236 69348 69498 69576 69778 69957 70042 70251 70322 70491 70567 70895 71173 72050 72242 72414 72480 72573 73052 73082 73126 73170 73343 73545 73624 73653 73838 73896 74115 74329 74416 74545 74626 75068 75138 75440 75547 76454 76676 77144 78279 78352 78527 78652 78682 78744 78800 78884 78922 79131 79224 79604 79646 79730 79799 79881 79926 79938 80069 80079 80197 80271 80490 82350 82711 85151 85259 85516 86681 88456 88493 88523 89855 89975 90417 90436 90523 90678 90864 90976 91030 91134 91203 91247 91526 91670 91847 91910 91952 92307 92472 92724 92790 92856 92973 93146 93278 93394 93507 93517 93678 94030 94062 94072 94282 94391 94466 94569 94915 95134 95192 95234 95375 95458 95489 95521 95534 95547 95773 95900 95944 95971 96072 96254 96342 96442 96648 96761 97067 97168 97237 97442 98704 98833 99003 99514 99772 100143 100336 100659 100797 100921 101084 101433 101675 102283 102361 102406 103586 104868 105119 105194 105809 107615 108732 108893 110129 110865 111881 112259 112384 112495 112535 112612 112625 112668 112809 113175 113262 114276 114674 114986 115080 115414 115485 115499 116898 117247 117532 117659 117783 117852 117924 117936 117951 118428 118589 118696 118959 119030 119163 119300 119319 119452 119467 119477 119587 119716 119815 120007 120118 120229 120340 120354 120407 120451 120495 120532 120562 120596 120634 120680 120711 120743 120792 120864 120899 120950 120989 121031 121064 121113 121149 121187 121232 121290 121366 121426 121498 121546 121654 121698 121736 121792 121868 121896 121944 121986 122056 122117 122158 122246 122290 122366 122414 122484 }
Total retries = 33 (1.78%)
Done _processRequest for job target: file://localhost/Users/draennajackson/Desktop/Subtle%20Seduction%20copy-Subtle%2 0Seduction-MPEG-2%205.0Mbps%201-pass%2016:9.m2v
I, of course, have no idea what this means, if it means anything at all. The only work-around for this problem I was able to find was to export it as a QT then send that to Compressor. I'm afraid that there will be a loss of quality. We will be showing this on the big screen and I can't have the quality diminished. Any thought?
Thanks in advance guys.

So when searching, I found a thread that said that failing without an error can mean that there is a corrupted clip. So I searched my timeline and found that, for some reason, all my imported clips had gone offline. My titles, effects, all of them. They also didn't say that they were offline until I clicked on them. I reconnected, and now it works fine.

Using Windows 7 Backup (with 3.0 TB drive) the backup fails with an error code of (0x8078002A)

I have tried for over a month to back up my laptop to a new external 3TB drive (DWC130). I have reformatted it, changed my windows backup settings, and read as much as I could about this issue and still have had no success. I have reformatted the drive; I have allowed Windows 7 (64-bit) to back up with its own settings; I have read forums all over and there has been no answer provided that solved this issue. I am hoping someone from Toshiba or this form can provide some direction.

Error code 0x8100002F and or error code 0x80070002 when you back up files in Windows 7
-Jerry

Services in transaction sicf failing with Internal Error 500

Hi all,
When I try to test a service in transaction sicf, by right clicking on it and saying Test service.
I am getting an error "HTTP 500 Internal Server Error". All the services are running fine in
smicm.
The version of SAP is ECC 5.0(only ABAP Stack), Oracle, Windows.
This happens for all the services.
Any help would be greatly appreciated.
Thanks,
Vishi

Hi Sharath,
I have selected all of them, clicked on publish, the I got a message saying "choose an ITS for publishing"
Using the message in performance assistant,
In se80, Utilities->settings, On the ITS tab under Publish choose the ITS server,
However, here the only options are
1. on all defined sites,
2. on selected site, print
3. to local directory.
Here, I have selected on all defined sites.
Got the message "Object published successfully; site All Defined Sites"
How to proceed further?
Thanks,
Vishi
Edited by: sap.technical on Mar 9, 2010 6:15 AM

Copy Express Fails with "Internal Error (-5002) Occurred"

Hello experts:
I have SAP B1 Version 8.8, PL16.
I have two users I want to add from the old database to the new database. It works fine for one and the second one has a failure with the above error statement. I cannot figure out why the two users are creating different results. All I am doing is adding two users...
EDIT: I did see that the successful user which was brought over is a Superuser and the other one was not - the only difference between them...
Of course I have searched the forum and -5002 seems to have to do with DTW, ,but nothing on Copy Express...anyone know why this is happening???
What great error messages we have - they make so much sense!!!
Many Thanks in Advance and Regards - Zal
Edited by: Zal Parchem on Mar 25, 2011 5:04 PM

Hello Julie...thanks for doing that. I did the exact same thing and it just ended up "wasting" away with no response from SAP. They could not figure out themselves...and they moved the priority down to "low" (which is the kiss of death in any inquiry)...
So, I think it ends up as this whole conversation has already centered around - namely, error messages and absolutely no explanation as to what those error messages mean. LOL - like I could have ever gotten away with this while I was in development: throw out an error message and not give any of the Users exactly what the error messages mean or what they need to do to resolve the situation!!! Sloppy, sloppy, sloppy is the bottom line...
I have used Copy Express since this and have had similar experiences with error messages - it just gets down to "do as much as you can with Copy Express and then manually enter the information" - what a waste of time, especially when you consider this could be such a great tool with the proliferation of integrated systems!!!
Gook luck finding out and hopefully something comes of it...
Regards - Zal

Xperia z1 4.3 update failed with UE error code 5

Got this error while updateding Z1 c6902 to 4.3 on OS X. What should i do?

The first thing to try is to update the version of Java you are using then restart the computer and try the update again:
http://www.java.com/en/download/help/mac_java_update.xml
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

VM creation on a cluster fails with Internal error code: 0x80990C1D

Similar Messages

Maybe you are looking for