[VMware ESXi Server] VMware Workbench 3.0 - Customizing RHEL OS Image Error

Dear Sir,
We are certifying VMware ESXi 5.1 update1 Server by VMware Workbench 3.0.
We always encounter an error while customizing OS for RHEL 5.5 32-bit/RHEL 6.0 32-bit image which downloaded from RedHat.com .
The attachments are snapshot and detail error message.

Hi Ruby12,
I store RHEL ISO images at VM which is an appliance downloaded from VMware Server Certification site.
Note: I also store SLES ISO images at VM, but Workbench3.0 can convert it successfully without any issue.
Does those info. help to clarify this issue??

Similar Messages

ODBC call SQLDriverConnect for data source Server name failed: [ . Notify Customer Support.

Need help !
While running DS job through designer we are getting below error:
ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support.
Additional notes:
1. Source and Target datastore are getting connected properly as i have imported table's definition using it.
2. Source and target data store pointing to SQL server 2008 R2 express edition DB (64 bit).
3. It seems like server machine has both 32bit and 64bit drivers installed on it. Please refer attached driverdetails.jpg file for more details.
Thanks

Hi did you referred this :
ODBC call <SQLDriverConnect> for data source <MyComputer\SQLServer2008R2> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.>. Notify Customer Support.

Change the boot order of an RHEL ESXi server

How to programmatically change the boot order of an RHEL ESXi server?

Broken Arrow wrote:
Harold asked a perfectly reasonable and necessary question, but how is that a Solution ???
I believe it is called the Socratic Method.
Sea-Story time
I had the privledge of working for Ron Davis when he managed the Allegheny District of DEC. He was an ex-WO4 (Highest possilbe rank for non-commisioned officer in US Navy, required act of congress to confirm).
Ron never answered any question I ever saw presented to him. I remember a group of managers in a frenzy over some issue running to him to to see what he thought. He asked them a series of questions that lead them to the solution and soon they were smiling and slapping each other on the back as they walked away.
Who is that has a signature that read "it is the questions that guide us"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Difference between workbench request and customizing request in transport

Hi Experts,
I am new to SAP BI7 work. i am having basic doubt in Transort request creations
ususally we create the requests to transport the objects from Development system to further systems.
can anyone please clarify me, what is the main defference between the Workbench request and Customizing request.
Thanks and Regards
Mrudula

Hi ,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
and many more threads available on this.
Regards,
Rahul.

UCS: Can't reach ESXi server

Hi,
i installed ESXi4 on UCS B200M1 Blade, after ip address Configuration is done isaw:
"Download tools to manage this host from
http://10.10.10.20/ (static)"
But i can't ping this Ip Address and i can't reach it by http.
I use the same ip address as KVM ip pool, i can ping KVM ip addresses.
I pluged and configured management ports only on UCS Fabric interconnect, i didn't pluged any uplink ethernet ports.
Did i miss something?
Do i need any uplink ethernet ports to reach esxi server?
thank you

You need to connect the uplink ports on your 6100's. The management ports are only for KVM or IPMI access to the blades. They will not supply connectivity for the vNIC's. Your ESXi install is attempting to connect to the network via the vNIC's. Also do not set the management IP for the ESXi host to match the management IP in UCS, this will cause a duplicate IP address on your network.

Monitor the resources of esxi server and VMs

I want to monitor the resources of esxi server and VMs. Can anybody tell me what is the major points I need to be remember so that our esxi server and vms will work smoothly.and I am little bit confused how to manage the charts and graph can anybody plz tell me .
regards
vikrant kamboj

Hi,
You have to work with overrides in that case. For both Monitors you have to create an override which is targeting your Group of Servers and configure the thresholds as you need them.
This links should help you:
http://jimmoldenhauer.blogspot.co.at/2012/11/scom-2012-creating-overides.html
http://technet.microsoft.com/en-us/library/hh212771.aspx
Cheers
Christoph Maresch| My blogs: blog.cmaresch.at | Xing:
Christoph Maresch | Linkedin:
Christoph Maresch If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

What is the difference between workbench request and customizing request

hi gurus
can anyone suggest me
what is the difference between
workbench request and
customizing request
abaper ll work on which request
thank you
regards
kals.

A quick search in the forum would have taken you to this answer
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

Oracle Application Server 10g R2 32bit installation on RHEL 5.4 64 bit

Hi !
Is it possible to install 32 bit Oracle Application Server 10g R2 on 64 bit RHEL 5.4?
Is there some spacial care I need to take to do this?
Regards,
GC

May be possible but it is probably not tested by Oracle nor is it supported as error correction support for OAS 10g has finished more than a year ago.
A good starting point is My Oracle Support Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=564174.1]564174.1, "Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5". Make sure that you always use a 32-bit emulated shell (linux32 bash).
Thanks,
EJ

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

HT201210 When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid

When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid?

Temporarily disable any security software on the computer and try again.

An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are try

hi i am getting this error.
An error occurred at the server : Your request was cancelled due to an internal error on the Page Server. The object you are trying to view does not have the required property 'SI_FILES'. Please contact your system administrator
please do the nedful.

yeah Ted Ueda,
what you are saying is correct. i am getting this output for
report.getProgID() is CrystalEnterprise.Report.
can you elaborate this. i am new to this. and also please let me know how to start and if u have any materials on this please forward to [email protected] and [email protected]
please let me know which is best book for beginers.
Thanks & Regards,
Purushotham Podaralla

While installing the sql server 2008 management studio I am getting the below error.So what do I do?

Hi,
While installing the sql server 2008 management studio I am getting the below error.
unhandled exception has occured in your application.if you click continue,the application will ignore this error and attempt to continue.if you click quit,the aplication will close immediatly.
An error occured creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings:Could not load file or
assembly 'system.version=4.0.0.0. culture=neutral, publickey token=b77a5c561934e089' or one of its dependencies.the system cannot find the file supplied.
(C:\users\harsha\appdata\local\microsoft_corporation\landingpage.exe_strongname_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config
and finally it is giving the options like continue and quit the installation.
So what do I do?
regards,
harsha.

Hello,
Please try deleting the following sub folder to see if this will work:
C:\users\(my profile)\AppData\Local\Microsoft_Corporation
If you can't see AppData folder, you could use following steps to show hidden files:
1. Open an explorer window, hit "ALT-T" choose Folder Options then go to the view tab.
2. Turn on Show hidden files, folders or drives and
disable Hide protected Operating System files (recommended).
SQL Server 2008 setup fails with a Microsoft .NET Framework exception:
http://blogs.msdn.com/b/vsnetsetup/archive/2009/10/29/sql-server-2008-setup-fails-with-a-microsoft-net-framework-exception.aspx.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005 Description: "Internal error: An une

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???

You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog

Baulsc help - Can a custom validator display a error in the UI dataTable

Hi balusc,
Pls refer to my post in the topic
"Can a custom validator display a error in the UI dataTable + jsf"
Give me a solution pls.
Thanks,
Ambika☺

avoid another thread for same ?
http://forum.java.sun.com/thread.jspa?threadID=5229577

Help!!! - When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
Steps I followed in Creating a New customer Profile
==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
*1) Profile Class Tab :*
a) Balance FWD Billing : Not enabled
b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
c) Set Terms as per ur requirement , do allow discount & Override terms
d) Set Dunning as per your requirement,
e) Filled in Collectors info as per your requirement with Credit Check enabled...
f) Receipt --> Auto cash Rule set as 'Standard'..
*2) Late Charge Profile* Set it as per requirement
*3) Profile Class Amounts* e.g Say Currency set as "USD"
a) Credit Limit : 100000
b) Order Credit Limit : 100000
c) Minimum Receipt Amount : 1.00
d) Min statement amount : 1.00
e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
f) Minimum Customer Balance : Amount ------> Value: 5.00
g) Minimum Invoice Balance : Amount ------> Value: 5.00
h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
i) mention Type as Fixed Rate, Value : 10
j) You can avoid setting the Penalty Charge for the time being..
Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well I could see this.
When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

Hi
You get this error when profile class amounts are not set for all the currency. Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
Regards

[VMware ESXi Server] VMware Workbench 3.0 - Customizing RHEL OS Image Error

Similar Messages

Maybe you are looking for