Voice mail and Embedded-Service-Engine0/0 issue

Recently I added PSTN and SCUE-ISM-8.6-K9 to be applay (IVR and Voicemail) on my Cisco Router 2921 ,
The PSTN now is working properly ,But I facing three issue of the voicemail ,Embedded-service Engine and IVR configuration as the following:
1- I recieved the following error message when enable the Embedded-Service-Engine0/0
"Memory size does not meet the requirements of Embedded-Service-Engine0/0"
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FCZ162670HW
4 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
2 Voice FXO interfaces
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
Cisco Unity Express 8.6.6 in slot/sub-slot 0/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
2- Kindly the attached file of the Voice mail configuration but not working.
3- Please, can you provide of a document about IVR configuration ?

Hello Ammar,
As per the error you required more memory for ESE module to work, you have only 512MB memory. Now I assuem you configured on Service-Module right ? It will work fine without any issue.
Next for your voicemail not working can verify that you have configured the SIP dial-peer to reach the Voicemail tiggered phonenumber i.e. 700 in your case.
dial-peer voice 101 voip
session protocol sipv2
session target ipv4:192.168.130.101
destination-pattern 700
Thanks
Selva

Similar Messages

Is there free voice mail service? if so how do i get it to work? all i see when i click the voice mail icon is the accept/decline for visual voice mail and that says theres a charge?

Is there free voice mail service? if so how do I set it up? When I click on the voice mail icon all I see is the accept/decline agreement for Visual Voice Mail and it said something about charges will be applied on my bill so I declined.

Your Basic voice mail is a free required program for you if you do not want Basic Visual Voice mail (free) or Premium which is a paid service. Basic Voice Mail set up is free and easy to do.
1. Sign in to your My Verizon online account.
2. On left side of page in Blue letters find the drop down menu. Click to open menu then go to change features and locate Basic Voice mail and click the Red add button.
3. When you're done making this change click next at the bottom of the screen and then ok.
4. Now go into your device and set up your Basic voice mail program. You may continue to receive an error message for a period of time “Visual voice mail update”, just clear and disregard.

Is there a way to hear voice mail and see text messages online?

My Stratosphere fell to the floor last night, and I can no longer see the display. Nothing I or the Verizon support guy could do today restored the display. The phone has rung but touching the screen to answer it does not work. I have purchased a new Stratosphere on e-Bay - I don't trust the locals to repair the phone properly - but there'll be a few days until I can get phone service again. Is there any way to access voice mail and text messages through the Verizon website or another phone during this period?

If there are people with whom you are expecting to exchange text messages, you can contact them to let them know of your plight by sending an e-mail to their text message address. For instance, [email protected] or [email protected] Of course you have to limit the message to text-message length.

Please remove the trial Visual voice mail and restore the basic voice mail functionality.

Please remove the trial Visual voice mail and restore the basic voice mail functionality.

To Disable Visual Voice Mail
Sign in to your My Verizon online account. On left side of page find the drop down menu.
Click to open menu, then go to change features and locate Basic Visual Voice mail.
Locate the button Basic Visual Voice Mail and click the Red Remove Box.
Scroll down until you see the listing: Basic Voice Mail, Visual Voice Mail etc. and click the Red Add box by Basic Voice Mail to add on this service.
When you're done making changes click next at the bottom of the screen and then ok.
Go into your device and set up your required Basic voice mail program. You may continue to receive an error message “new voice mail update" for a period of time”. Hope this helps, GalaxyClass

Voice mail and online number

I have set up voice mail for my account; then bought an online number. When I called my online number from my iPhone, it did not answer with voice mail. Do I have to set up a NEW voice mail for my new online number?

Have you tried this.
First check that your privacy settings are set to ''Allow calls from anyone''.
Then change them to "Allow SkypeIn calls from Only people from my Contacts List".
Save and wait for 5 minutes.
Log out from your Skype account and log back in.
Change settings back to "Allow calls from Anyone".
Save and wait for 5 minutes.
Log out from your Skype account and log back in.
Go into your account from your computer not your mobile and check on accounts. On the top there is a voice mail icon. Click on the icon and it will tell you if your voicemail is enabled. if not you can enable it then.
If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
Thank You!

E-mail and Internet Service stopped working and I cannot get it going again - Pearl 8130

I recently activated e-mail and a data package (December 12th to be exact). On Saturday I noticed that I stopped receiving e-mails from my Hotmail, and as of today I'm receiving any e-mails from my work e-mail either. It worked 100% normally up to this point.
My browswer or online applications are not working whatsoever either. It says "There is insufficient network coverage to process your request. Please try again later", which is garbage as I have just fine network coverage as I sit in my office.
Yesterday I received a message to my phone stating:
"Update the password for jsytsma@**************.on.ca in the BlackBerry Internet Service! E-mail messages from jsytsma@**************.on.ca are not being delivereed to your BlackBerry device. To resume receiving email messages from this address, update the password for jsytsma@**************.on.ca in the BlackBerry Internet Service:"
And it proceeds to tell me how to do this. It says I can do it through my phone, which is a dead end as I go to tweak it, and I get the message about "Insufficient network coverage".
I then went to my Web Client login and tried what I thought to be my username and password. I tried several combinations and nothing was working. I have 2 passwords I use for things and I tried them over and over again with different user names, but I'm 95% sure my user name is "jsytsma".
So last resort, I type in my pin and it said the username/password will be sent to my BlackBerry messenger. That would be great if everything were working! So far it's been over 2 hours and I've received nothing.
Is there a number I can call that DOESN'T cost me $55 CDN dollars a call?

Do that ^^ as stated.
or:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot
if still nothing...
3. resend your service books from your carrier BIS site.
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
or, for a call that doesn't cost you $55, call your carrier.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Voice mails and calendar invitations going to junk mail

We are running our own exchange server. I believe it's Exchange 2013. I work more on the client side support of things right now so I am not going to have all the answers when it comes to server details.
I can, however, tell you that the affected users span multiple OUs and access levels so there truly is no pattern to discern from their credentials.

Hello Spicy peeps!
We use Office 2013 in our environment and I have had several users (no rhyme or reason) recently complain that some of their incoming correspondence is getting dumped into the Junk folder. For some, this is voice mails. For others, it's calendar invitations. There is no pattern to the users affected or the items affected. Obviously, we have tried the route of marking them "Not Junk." This has not worked to resolve the problem.
Have any of you seen this before? Any known fixes?
This topic first appeared in the Spiceworks Community

Voice mail and a separate answer machine

bendmitchell wrote:
Can I use the Xfinity voice mail feature even if I have a separate answering machine hooked up?Yes. To ensure that your messages stay on your personal answering machine, set the number of rings on the Comcast VM system at least 2 HIGHER than your personal answering machine. Example: Personal set to 4 tings, Comcast VM set to 6 rings. You can edit the number of rings of the Comcast VM system by going here: https://pf.connect.comcast.net/ Click on VOICECLick on Call ForwardingEdit the number of rings of your home number.

Can I use the Xfinity voice mail feature even if I have a separate answering machine hooked up?

Mac mail and sandbox com.apple.intern issue

Hi,
I have two disk on yosemite. One of them, system disk as SSD, and other HDD data disk.
I set hard link ~/Library/Mail to /Volumes/Macintosh HD/Mail
and set read/write permissions.
when run mail client ask always mail settings, after crash the application.
I can see created new a few *.plist files under the /Volumes/Macintosh HD/Mail and ~/Library/Mail
so, I check logs from console.app and I see following error ;
18.04.2015 12:43:45,000 kernel[0]: Sandbox: com.apple.intern(346) deny file-read-data /Volumes/Macintosh HD/Mail
how can i fix this problem ?
Thanks

i navigate to /Library/Containers/com.apple.mail/Data/Library/Preferences in the finder and delete com.apple.mail.plist file in the folder.
and resolved this issue

Google Mail and CC'ing myself has issues

The problem:
When I CC myself in Apple Mail, i never get them back.
My setup:
I have several of my own domains with email addy's forwarded to my Gmail acct. From there I have enabled GMAIL to allow for POP. I then login to Gmail with Apple Mail. I also use Google as an auth SMTP server.
I CC myself and no matter what account I CC to (any of my domains), Apple Mail does not get them back from Google. If I login to google's web front end, there are all my CC's sitting right there in my inbox. Apple Mail just won't grab them.
Everything else works fine with POP and SMTP.
Any ideas?

I believe this is a Gmail issue that you can do nothing about, and that the same would happen with any other mail client, not just Mail.
Please, provide a more concrete example of what you’re doing, indicating the (disguised) addresses involved in all the relevant headers.

Mail and Web Services

Hi
does Mac Server have mail server something like MS Exchange ? and does it have web server in it ?

Yes, it includes a web server, mail server, calendar server, address book server and more.
http://www.apple.com/server/macosx/
Message was edited by: stephen2011

Help: Apple Mail and Exchange - Internal/External servers issues

Hi, I'm new here... coming from the dummy pc world...
I am using Apple Mail in 10.7 connected to a MS Exchange 2007. I first configured the exchange account while out of the office (the firm is overseas), and had the server with the IP address and SSL at 443 port. Everything worked fine.
Then I went to the office for meetings and had to recofigured the whole enchilada (the IP address would not work as internal server while in the network). I input the internal server (a weird address "alm-srv06") and moved the IP address to the external server. It also worked fine.
But, when I came back (out of the office), the account is not working anymore. Obviously, the internal server doesn't work and the external server is not kicking in. I have even manually switched the servers, bringing the IP address to the internal server and keeping the wierd internal server address as the external server (so I can remember the config later on when I go back to the office overseas), but it is still not working...
Any thoughts?
Thanks.

Hi, I have a slightely different problem. I first configured the exchange server account while out of the office (the firm I joined is overseas), and had the server with the IP address and SSL at 443 port. Everything worked fine.
Then I went to the office overseas for meetings and had to recofigured the thing (the IP address would not work as internal server while in the network). I input the internal server (a weird address ("alm-srv06") and moved the IP address to the external server. It also worked fine.
But, when I came back, the account is not working anymore. Obviously, the internal server doesn't work and the external server server is not kicking in. I have even manually switched the servers, bringing the IP address to the internal server and keeping the internal server as external (so I can remember the config later on when I go back to the office overseas), but it is still not working...
Any thoughts?
Thanks.

My iPhone is backing up voice mails and not letting me erase

I have an iPhone 5s and I repeatedly delite erace the voicemails but they keep coming back, help

Welcome to the Apple community.
Have you tried deleting them, then deleting them again from your 'Deleted Messages'.

Brother fax machine and digital voice mail

Is it possible to use digital voice mail and a fax machine simultaneously.
I just bought a Brother fax 2840 machine and it doesn't seem that I can continue to use my digital voice mail with the fax machine without adding another line, can anyone help.
Thanks

I have problems when my Brother Multifunction machine is set to phone/fax which enables my answering machine too.
When soemone calls and they hang up, I get a ring busy. It seems I can't use my messaging center on the Btother. Any suggestions? Is there a way to use the Verizon Voicemail and have it recognize if it is a fax being sent so that it rings through?

My iphone 4s voice mail is not working. Can you help?

I travel between CA and India. When I am in india, I put in GSM chip in India and it works. When i came back -- I removed the chip and sprint phone is working -- except that voice mail and visual voicemail are not working. in fact, when people call my phone it says that the number is not in service.
any thoughts or suggestions?

I would contact sprint to resolve your issue.

Voice mail and Embedded-Service-Engine0/0 issue

Similar Messages

Maybe you are looking for