Voice Over not working correctly

When i press and hold the voice over button to get into band list, it just say "All songs" and back to music, instead of "All songs..." and say the band names so i could go to another band.
I really need help.
Thanks, Caio.

Sorry about the question, i just figured that i didnt create the lists before sincronize, now it's working fine. Thanks anyway

Similar Messages

Voice Over Not Working

Hi,
I've used voice over in Final Cut Pro before and ever since I hooked up an external monitor it won't work.
I've just recently bought the M-Audio 410 mixer and would like to use it.
Could somebody please help?!
Thanks!

I have it connected via firewire, but firewire and regular mic jack wont work.
Is there anyway I could restore the default settings without having to reinstall FCP?

Voice Over not working after a few days.

Hi, I really need help on this one.
I have a friend who can't do anything without using Voice Over. We downloaded french voices and everything runned perfect for a few days, then it suddenly stopped working. When starting up the computer, we just hear "Talk deactivated" (in french), then nothing more. But the talk option is still "on" on the Voice Over preference panel.
The other problem is that we used the zoom function and made it following the cursor. Now, it just ignores the mouse's movements.
I don't know what to do.
Many thanks by advance !

This is quite a common problem. The usual cause is inadvertent use of the "mute speech" command via the Trackpad Commander.
To toggle VO speech on and off using the Trackpad, tap twice with three fingers simultaneously.
Otherwise, you can summon up the VoiceOver command menu using VO-H-H, type "PAR" (French for "SPEech" and press Return.
For the Zoom problem, open System Preferences —> Universal Access and make sure you tick the "Zoom follows the keyboard focus" checkbox.
You might also want to experiment with the Screen Image radio buttons lower down the window:
• Continuously with pointer (some people find this makes them seasick);
• Only when the pointer reaches an edge (usually preferred); and
• So the pointer is at or near the center of the image (some people like this).
Have you thought of looking at the French language website http://cecimac.org/ ? It's full of articles and tips for beginners, all in French. There is also a very lively e-mail Forum for Francophone VoiceOver users.
Good luck,
Archie

Genius voice over not working

When I first got my 3gs I was able to create genius playlists with voiceover by saying the command "Play more songs like this." All of the sudden it stopped working. When I try I get the message "genius not available."
It does it with every song I try. I can however create genius playlists manually by tapping the genius icon when a song is playing.
Anyone have any suggestions?

Hmm .. not another Genius you need an appt with, I hope
Phil

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly

Exchange 2013 SP1. On going Saga- Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
We tried:
1. Populating both Autodisover internal and external urls with the legacy namespace
2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
Everything else externally was working when we cut over.
any and all help appreciated
Tony

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Mouse pointer is not working correctly

I have a MacBook Pro and the pointer is not working correctly. It does not work smoothly and it is hard to get it to go where I need it to go.

Hello billm46,
Welcome to the Apple Support Communities!
It sounds like the trackpad on your MacBook Pro is displaying jumpy behavior. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
Have a great day,
Joe

HP PAVILION DV6 6154FAN NOT WORKING CORRECTLY

MY LAPTOP FAN IS NOT WORKING CORRECTLY A STARTUP MESSAGE COMES FAN NOT WORKING CORRECTLY GO TO SUPPORT FORUM.
MY PRODUCT WARRANTY IS OVER.
PLEASE ADVICE ME WHAT TO DO.
SEEKING FOR KIND SOLUTION.

Try cleaning up the cooling module. Blow compressed air into the fan grill. Test the laptop after the fan and heatsink is clean.
If cleaning the cooling module doesn't help, you'll have to replace the fan. This requires complete laptop disassembly.
In order to replace the fan you'll have to remove the motherboard.
Here's the official service manual which could be useful.
By the way, there are two different types or cooling modules. One for AMD processors and another one for Intel processors (page 93 in the service manual).
If you decide to replace the fan, it's not necessary to replace the entire cooling module assembly (heatsink and fan). It's possible to replace just the fan which can be purchased on eBay.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Cooling fan not work correctly

my computer says the cooling fan not work correctly plase visit www.hp.com.go/teachcenter/startup

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you
It looks like you are having difficulties with regards to the Cooling Fan of your Netbook
We will surely assist you with this
According to the message you have posted I suspect this is purely a hardware issue where in your getting "System Fan(90B) - The system has detected that a cooling fan is not operating correctly" message. This is a mechanical fault and the Cooling Fan on your Notebook and needs to be replaced before the Notebook starts up with an Overheating Issue.
Causes/Reason for this Issue:
1. Sometimes this is just because of Dust, Pet Animals Hair slowing down the fan
Perform the below shown troubleshooting steps:
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till Unit loads Windows and then Shut down the Netbook again
Step 09. You should clean all the Vents and Openings really good with a can of compressed air
Note: If you are still getting the same error we need to replace the fan
I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Netbook Fan replaced and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

[solved] NFS client will not work correctly

I have all my $HOME on an NFS Server. So long I used suse and debian, now I want switch to arch but the nfs-client ist not working correctly:
I start "portmap nfslock nfsd netfs" over rc.conf. When I do a "rpcinfo -p <ip-arch-system>" I got the following
stefan:/home/stefan # rpcinfo -p 192.168.123.3
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100021 1 tcp 48988 nlockmgr
100021 3 tcp 48988 nlockmgr
100021 4 tcp 48988 nlockmgr
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 3 udp 891 mountd
100005 3 tcp 894 mountd
As you see "status" is missing, so the statd is not running. It sould look like the result on my suse box:
stefan:/home/stefan # rpcinfo -p 192.168.123.2
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32768 status
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100024 1 tcp 35804 status
100021 1 tcp 35804 nlockmgr
100021 3 tcp 35804 nlockmgr
100021 4 tcp 35804 nlockmgr
There is the "status" line and so the statd is running.
How can I fix that problem, so that statd ist running on my arch box too?
Last edited by stka (2007-06-10 15:59:48)

The Problem ist solved.
I use ldap for authentication. During the setup of the ldapclient I copied the nsswitch.ldap to nsswitch.conf. But the line for "hosts:" was:
hosts: dns ldap
but in my dns ist no localhost entry. After I changed this line to:
hosts: files dns ldap
everything was ok. The statd is now running and I can start to migrate to archlinux ;-)

The trackpad/gestures is not working correctly on mountain lion

Hello,
After I have downloaded Mountain Lion, my trackpad/gestures is not working correctly. I cannot swipe with the three fingers, etc. and have to reboot and then it works, but will eventually not work over time. Does anyone else have this problem?
Thanks,
Jeff

I am having the same problem now.
Was okay when first installed on date of Mountain Lion release.
Now I have lost function in Spaces.
Spaces would only work if I used Dock icon to move between Spaces.
Now just run everything in one Space.

RV042 Load Balancing not working correctly?

We have an RV042 on firmware version 1.3.13.02 and 2 ISPs:
WAN1 = Telepacific T1
1.5Mbps down and 1.5Mbps up
WAN2 = AT&T U-Verse
12Mbps down and 5Mbps up
I have it set to Load Balance, Primary WAN = WAN2
Network Service Detection enabled, only pinging the Remote Host of 4.2.2.2 and set to Generate Log
Bandwidth is set to:
WAN1 = 1000Kbps upstream & downstream
WAN2 = 5040Kbps upstream & 12000Kbps downstream
It seems to pick WAN1 a lot of the time. Do I have something setup wrong?

Ok, so what do you recommend? To setup binding for ports important to direct over say… WAN1 (my fast access) shall I also keep the bandwidth management set up as is, example:
For me it’s confusing because this config appears to be clear to me that has to control traffic the way I want .
Thanks for your response.
H Aragon
De: jasbryan
Enviado el: lunes, 20 de febrero de 2012 03:18 p.m.
Para: HECTOR MANUEL ARAGON
Asunto: - Re: RV042 Load Balancing not working correctly?
Home
Re: RV042 Load Balancing not working correctly?
created by jasbryan in Small Business Routers - View the full discussion

Windows 8 - SC6 started doing weird things, not working correctly

Windows 8 and CS6 - Liquifying tool not working and and actions not working correctly, back ground screen flickers and changes color and does weird things. I have done a complete D&R and it does the same thing. Someone with the same problem suggested a D&R and deactivate, then reinstall and reactivate, could this possibly work? if so, how would you do that? Thanks

Yes, one I can think of. Get the make and model of your video card and head over to the card manufacturer's website.
Check for and install the latest drivers for your card.
Also see if changing the settings of your GPU helps. Uncheck everything (OpenCL Anti-alias 30 bit displays) and start at Basic. then work your way up to Normal and Advanced.

HT201365 my text to send messages is now not working correctly after upgrading

Since upgrading last week my text is not working correctly it is very slow does not show the letter being used and takes seconds to be put in

Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

Voice Over not working correctly

Similar Messages

Maybe you are looking for