Voice prompts when creating text msgs

I wish to turn of the voice prompting and auto suggesting when creating text messages but cannot find how to do it

Sounds like you have activated Voice Over in Accessibility. Go to Settings>General>Accessibility and turn off Voice Over. Also check Accessibility Shortcut and see that is turned off.

Similar Messages

  • Odd messages when creating text object (se75)

    I am trying to create a text object and text id's for an application. I go to se75 to do this and make a text object called ZABC and upon save I get an informational message saying the following:
    Observe name ranges: Y,Z for customers, J_NC for partners, A..X for SAP
    When I click the green checkbox, it pops up another box saying the object is not within the valid name range. Save anyway?
    I tried creating one with Z_ABC and that came up with the same thing. What am I doing wrong here?
    Thanks,
    Josh

    duplicate post
    Error message while creating text object

  • Bullet problem when creating text frames and tables in InDesign CS5

    Every time I create a new text frame or table in InDesign CS5 and paste information there, the first row in the table or several lines of text come out with bullet points. I'm sure this is a setting or style at some point I created and now am unsure of how to delete. I would like the new text frames and tables to not include bullet points as a default when imported or pasted. Any thoughts? Thanks!

    Defaults for text in the current document are made with no text selected. Turn off bullets and they should stay off (but check the styles, too, you might have accidentally set a bulleted style as the defualt and you should change the default style instead). If this is happening in all files, you need to do it with nothing open to reset the default for all new documents (existing files, unfortunately, need to be fixed one at a time).

  • Failed to fill the prompts when creating Webi Report

    Hi,
    I am having some difficulties when I was trying to creating Webi reports. It shows error when I tried to fill in the prompts before the query runs. The report data comes from the SAP Business Warehouse. So far it is my understanding for the query flow:
    Step 1
    SAP Business Warehouse <-- Query A (BW Query) <--
    Step 2
    BO Universe <-- Query B (By drag & drop) <-- Application(e.g. Webi, QaaWS)
    When I run the Query A (using 'Analyzer' in 'Business Explorer') to extract data from BW, the query appears 7 optional parameters for filtering. After I filled some of the fields, the query runs fine -> Step 1 OK.
    When I want to do the same thing in a BO approach by building query (i.e. Query B) to draw data from the universe (which points to the Query A in BW) using different applications(e.g. QaaWS, Webi via InfoViewApp, Java Webservice SDK: QueryService & ReportEngine, etc), the application will display 7 optional prompts (i.e. those referring to those appeared in Query A) before the query executes. However, when I tried to fill those prompts, the application appears some fill prompts error and no query job is submitted to the BW -> Step 2 Fails.
    When I skipped to fill those optional prompts in building the Query B, the query job can be submitted and the query result is returned.
    Before the error occurs, I have been working on building similar Webi report and everything goes fine. I feel so strange that why the error appears so suddenly and I would like to ask how to avoid it.
    Many Thanks,
    Gary

    Hi Adil,
    I am using BOXIR3 and a screenshot is attached below:
    [http://farm4.static.flickr.com/3200/2948600340_4f1330d283_o.jpg]
    I have built the query in InfoView by drag & drop and after I click the 'Run Query' (the circled area), it is expected I will be asked to fill in some optional prompts (from BW query). Instead, an error shown about 2 minutes after clicking the button,.
    [http://farm3.static.flickr.com/2004/2947792827_bfacdc7dbe_o.jpg]
    Regards,
    Gary

  • End-of-file on communicaton channel when creating text index on xmltype tab

    Hi,
    I'm trying to create an oracle text index on a table of xmltype. This table is using an xml schema and the table is using object relational storage.
    I have another table that is a relational table that has an xml type column, and I was able to create the text index on that xmltype column without any problems.
    Here's the create index statement and the error:
    1 create index table_one_text_index
    2 on table_one(object_value)
    3 indextype is ctxsys.context
    4 parameters
    5* ('section group ctxsys.path_section_group')
    6 /
    create index table_one_text_index
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    Process ID: 27137
    Session ID: 65 Serial number: 24961
    Any ideas? I've looked through the oracle text and the oracle xml db documentation and the forums and haven't found any ideas about what's causing the problem or how to fix it.
    Thank you

    Is the data in the XMLType columns the same in both cases.. Can you provide a testcase ? Which DB release are you working with

  • End-of-file on communicaton channel when creating text index on xmltype ta

    Hi,
    I'm trying to create an oracle text index on a table of xmltype. This table is using an xml schema and the table is using object relational storage.
    I have another table that is a relational table that has an xml type column, and I was able to create the text index on that xmltype column without any problems.
    Here's the create index statement and the error:
    1 create index table_one_text_index
    2 on table_one(object_value)
    3 indextype is ctxsys.context
    4 parameters
    5* ('section group ctxsys.path_section_group')
    6 /
    create index table_one_text_index
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    Process ID: 27137
    Session ID: 65 Serial number: 24961
    Any ideas? I've looked through the oracle text and the oracle xml db documentation and the forums and haven't found any ideas about what's causing the problem or how to fix it.
    Thank you

    A 3113 error indicates the Oracle background process has crashed. This almost always indicates a bug. Suggest you take a look at your database alert log file, and report this to Oracle Support.

  • HT4528 The screen when accessing text msg or trying to type increases in size and I can't see the entire keyboard, also a problem in the basic screen the icons get huge, almost like the ipad screen size. How do I correct?

    Sometimes when using the text screen, the font for the keyboard increases in size limiting the view of the entire keyboard on the screen. So far the only way to correct is to poweroff the iphone and the poweron aqgain and the problem ius corrected. This also happens on the basic screen, the size of the icons are enlarged, to a size that you can only see one or two icons or parts of them.

    Try going to Settings>General>Accessibility>Zoom to be sure it's off.  If the screen is already magnified, double-tap the screen with three fingers to zoom out.

  • Garbled Audio When Creating Text Title

    Hi!
    I am having a problem with iMovie. I am new to using the software so I hope this isn’t something obvious that I’ve missed.
    I wanted to add a title to the opening clip of a project. I laid it out and previewed it and it worked fine. When I placed it in the timeline, and allowed it to finish creating the clip with the title, the audio was garbled. I tried doing it a couple of times but still no success. Any ideas what went wrong?
    Thanks in advance,
    Fred

    Hi Fred - I don't know what caused your problem, but try extracting the audio before you again try to superimpose the title. The extracted audio should remain locked in place, on the top audio track.
    Hope this helps.

  • Autodiscover redirected prompt when creating profile

    I have autodiscover configured to go to
    https://autodiscover.domain.com/autodiscover/autodiscover.xml this points to a VIP on an F5 load balancer.
    My certificate is *.domain.com
    I have a few SMTP domains not in the certificate
    a user has [email protected] but when I configure an outlook profile it hangs on search for server settings for about 5-10 minutes then eventually comes back with the message saying allow http
    to https redirect to
    https://autodiscover.domain.com/autodiscover/autodiscover.xml
    i thought this process would be seamless rather than having to supress this with a reg key??
    ***Don't forget to mark helpful or answer***

    The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.domain.com on port 443.
    The Microsoft Connectivity Analyzer wasn't able to obtain the remote SSL certificate.
    Additional Details
    The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
    Elapsed Time: 659 ms.
    ***Don't forget to mark helpful or answer***

  • Voice recognition creates text twice over RDP connection

    Using an IPad 3 to connect to a Windows 7 Pro desktop and text repeats each time using voice recognition to create text in Outlook or Word. It only creates text one time locally. Just happens over RDP. 
    Any suggestions?
    This topic first appeared in the Spiceworks Community

    Rus, I've had similar issues on my iPhone 5. I was having issues that some people on my contact list just weren't getting my texts. I could text them before I got the iPhone and they received them no problem but now it wouldn't go through. Like you the phone said it went through but they never received them. I could receive their texts and even if I replied to their texts, they didn't receive it. I could call them though. I contacted Verizon and Apple but they we no help. What I figured out on my own was that if I deleted their contact from my address book and added it back in fresh, the problem was solved. It's happened to me with 4 different people that were in my contacts already and I deleted them and added them back in and it works fine now. What I believe was happening was I came from a non-smartphone. To transfer my contacts over I downloaded Verizon's contact transfer app on my old phone and uploaded them to it. When my new iPhone 5 came in I downloaded the same app and used it to transfer my contacts to my new phone. I think some of them got corrupted for some reason during the process. I don't know for sure if this is what was happening but since non of the new contacts that I added in after I got the iPhone have any problems I'm guessing I'm right. My concern still is that I will continue to find people in my address book that wont' get my texts and I just won't know it for sure. Good luck!

  • Creating text fields

    When creating text fields, how do I get the cursor to print on the line instead of far above the line?

    I dodn't understand the question. Can you elaborate, and maybe include a screen shot of the problem you're seeing?

  • Security prompt when opening .msg files in SAP

    I have a customer that gets this prompt when opening an attachment in SAP.  The attachment was saved from Outollk so it is in .msg file format.  The customer is using Windows 7, and Office 2007.  This is from the customer:
    As discussed, below is a screen shot of the pop up I receive every time when opening an email attachment with T-Code VA02.  I use this function multiple times per day.  Even if I select “Always Allow,”  I continue to receive this pop up.

    Hello Ronald,
    Did you try to create a security rule at the SAP GUI?
    Access the SAP GUI "options", then "security" -> "security settings". Click at the "Open security configuration" button, and then at the "insert" button.
    Regards,
    Isaías

  • Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

    Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
    However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
    What we found from out testing:
    - The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
    - The file can be closed and  Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
    - Also, until the  Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file. 
    Example Scenario:
    - User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
    - Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
    - User 1 saves his file and closes it - but  Dreamweaver is still open.
    - User 2 also saves his file and leaves  Dreamweaver  open.
    - The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
    - If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
    - Same for User 2, he will open 'his' version with 2300 lines in.
    Other information:
    - Files are opened directly from the server
    - Sometimes the users will save incrementally and re-open
    - Most of the time users will save incrementally and keep the files open
    - The users will never not save incrementally and just save when closing the file once finished
    - The users are usually working on the files all day
    - It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
    It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
    Anyone know if this is a known issue?
    Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
    Thanks

    Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
    Mylenium

  • Text Box in DOCUMENTS Tab when creating a Contract

    Hi
    I'm using SRM 5 , when creating a Contract(GOA), the minute you select the Documents Tab , the text box for internal note is already open, and it fills up the top portion of the screen. This does not allow you to save( or to put your contract either on hold, or to Release.) You cannot select any of those options as the text box covers the entire top area, the only option available is to click on "back to inital screen".
    When you select this option you loose all your work,and it takes you to the initial screen.
    I cannot find the note which has to be applied , please assist.
    Thanks
    T.

    Hi,
    Kindly review the following note:
    1067625 - ITS TextEdit: Control overlaps other screen elements
    This note should resolve this issue,
    Kind Regards,
    Lisa

  • HT4623 My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. 

    My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message.  How an I get rid of that

    Try this...
    have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
    That resolution came from another thread on this issue, and this did solve to poster's issue.

Maybe you are looking for