Voicemail not working - after removing and adding Dialplan

Exchange 2013
Lync 2013
I had a UM dial plan configured and it was working properly. I removed that plan and added a new one. The new one does not work.
When ever you leave a Voice-mail for a user, they never get it. If the user logs in, they still have access to old voice-mails that were left before the UM dial plan was deleted and a new one created.
My assumption is that when you activate the user for UM, it is attaching back to the existing information, instead of using the new dial plan. Anyone have any thoughts on how to stop this?
Is there a way I can just purge all UM information and start over?
Thanks,
Rogan

I did, as far as I can tell the new dial plan is working.
Currently, only I am enabled for UM in the environment. If you call my extension, you are able to leave a VM. I never get a missed call notification or the Voicemail. If I manually log into my Voicemail, I have no new voicemail and only
old ones that were left before this new UM plan was created.
I did remove UM from my account and re-add it with the new one, that did not solve the problem.
Where are the VM that are being left now going, if not into my mailbox.
Does deleting a UM remove any associated voicemails? Should it?
Do you know if there is a way for me to reset my mailbox, to fully remove the UM capabilities and then start over?

Similar Messages

[svn] 3752: Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.

Revision: 3752
Author: [email protected]
Date: 2008-10-20 12:41:06 -0700 (Mon, 20 Oct 2008)
Log Message:
Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.
QA: Yes
Doc: No
Checkintests: Pass
Details: Merged change 3676 from trunk.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-195
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
width: 220px;
left: 180px;

IPad wi-fi not working after Lion and cloud updating

Updated to LION OS 10.7.2 and updated iTunes today along with updating to the "cloud."
Updated iPad to 5.0.1.
Wi-fi is not working now.
On my desktop iMac I went into system preferences and went to "sharing" and have "internet sharing" checked. This is how it was working before.
I am trying to finish my iPad update. When I get to "wi-fi networks" it shows my iMac G5 but just keeps searching after I try to select it. It will not connect to my wi-fi. How do I get it to work????

I am using an intel i3. When I said above about my G5...that was just what my computer was named. I have a new iMac but when information was transferred it must have kept the name of it as my G5.

Iphone 4s camera still not working after replacing and restore?

I bought phone with back camera not working so first i done a restore and update to no avail, then done a restore as new phone still no joy, so i decided to buy new camera which i fitted no problems but its still not working? what else can i do as there is no warranty on the phone?

Find a third-party repair shop with experience in fixing iPhone cameras. Apple won't help you.
Be aware, since Apple does not sell iPhone parts, there is no legitimate source for such, & many on the market are counterfeit.

CC does not work after Uninstall and reinstall

Adobe 24/7 help online does not solve the problem. They come up and said to uninstall all, and as the result, I can not access ALL my software. Please help. Error message screen shot attached below.
This is on Home PC, OS: Windows7, 64bit, Core i5, 3.1GHz, 8GB RAM, was working properly more than a year or two. Now, I can not see ALL apps and the only see the "spinning wheel" for 10 minutes and shut down.

The Online chat support team ask me to do these stepts:
1) End all the Adobe related processes from the Task manager like Adobe CEP Helper,AAMupdater, AAMupdater notifier, Adobe Crash demon process, Coresync ,Creative Cloud.
2) Deleting the folders in various locations
3) Install the Creative Cloud Cleaner (.exe file) and run, clean ALL CC things
4) they give me a link to download and reinstall the CC
5) at the end, all the same problem. giving the same message as before "Microsoft Visual C++ Runtime Library - Runtime Error! Program: C:\Program Fi... "This application has requested the runtime to terminate it in an unusual way. Please contact the application's support team...."
Also, the support guy ask me to uninstall ALL CC Apps and I did it. NOW I have nothing left on my computer and I can not work. HELP

4G & Voicemail not working after upgrade to EE

I recently upgraded phone to Samsung Galaxy on EE (moving from Orange) and my old number appears to have ported OK, however I am unable to access Voicemail or the 4G data.
I have tried resetting and creating a new APN as suggested on other posts but with no joy.
Has anybody found a solution to this?

Are you in a 4G area? You will only get 4G if it is available where you are, and there are still plenty of areas that do not get it.
Have you checked under settings to see if it has been set up properly, the same with voicemail, that it is switched on. I do not have that phone, so cannot excactly tell you where to look.
If anything like mine in settings for data it should be under Network and then mobile and sim and you should be able to see what it says, it should have 4G.
Settings for voicemail should be phone settings and should have voicemail on.
Hope this helps.

After updating to Firefox 4, it will not open. I end the Firefox processes in Task Manager per trouble shooting procedures; still not working. Removed and re-installed. No go.

Can I revert to an older version? I tried all your published trouble shooting procedures to no avail to get Firefox 4 to open. When I try to run it, there is a process running in the Task Manager but no task or program actually opens.
I never had any problems with previous versions.

There are various causes for this error, see [[Firefox is already running but is not responding]] for details.

Lenovo Ideapad U410: Display not working after sleep and/or restart

Hello all,
I am recently having some inconsistent display issues with my Lenovo U410 laptop i7 1TB with a Windows 8 PRO upgrade (came with windows 7).
When I press the Power Button on my laptop to put it to sleep, the Screen turns black as if it is off, but the Power & Battery LEDs on the front of the laptop remain on, as well as the LED on the power button. However, when I try to wake my laptop, there is no response on the screen (remaining black as if it is off). The internal fan is running, however I receive no feedback when "blindly" trying to input my password.
I've tried to turn the power off and back on to no avail. I've also removed the power source and held the power button for a couple of seconds and that did not solve the issue either. I've tried connecting the laptop to a screen via HDMI (since there is no other AV port on the device), but there was no signal being sent through.
This is an inconsistent issue that began yesterday 6/11/2013. When the laptop is left alone for a little and is turned on again, the display works, but after closing the lid (sleep) or pressing the button, the display fails to turn on upon awakening.
In most recent circumstances, Today (6/12/2013) I was installing a Windows update that required my computer to restart. When the update configured perfectly BEFORE it was restarting, but AFTER the restart, my internal fan began to work, but the display was not on.
Does anybody or Tech support know what may cause this inconsistent behavior? or know any solutions to this issue?

I am facing similar problem - post sleep & sometimes on touchpad event - the screen gets stuck & a strange array of gray screen comes or the existing screen's colors get distorted & the laptop gets stuck.
model - Lenovo U410; 64 Bit; Windows 7 Home basic;, Intel core i5 processor
I have upgraded display drivers but that hasn't changed anything. Any help is appreciated.
Link to Image
Mod edit: Changed oversize pic to link per forum rule: 50k limit on pics. Please use a hosting site and a link or resize the oversize pics.

Voicemail not working after moving a user to Office 365

We moved 30 or so users in December to Office 365 from on prem Exchange 2007. Before moving we disabled unified messaging. Once we moved them voicemail worked and we didn't have to do anything further.
Last week we moved another user and on Exchange online Unified messaging was disabled. I enabled it but it still isn't working. I tried disabling and re-enabling but it has not helped. When dialed it rings and then the call disconnects
when it should send to voicemail.
Any ideas what has changed to stop this working now?

Hi Michael, thanks for the quick reply. This is what happens when we try for the user with the problem:
PS C:\> Set-CsUser -Identity "xxxxxxxx" -HostedVoiceMail:1
Set-CsUser : A hosted voice mail policy with empty destination is assigned to
a user enabled for hosted voice mail.
At line:1 char:1
+ Set-CsUser -Identity "xxxxxxxx" -HostedVoiceMail:1
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (CN=xxxx xxxx...xxxx,DC
   =org:OCSADUser) [Set-CsUser], ManagementException
    + FullyQualifiedErrorId : SetCSUser,Microsoft.Rtc.Management.AD.Cmdlets.Se
   tOcsUserCmdlet
But for a user whose voicemail works (both are setup identically in exchange online):
PS C:\> Set-CsUser -Identity "yyyyyyyy" -HostedVoiceMail:1
WARNING: Object with identity "CN=yyyyyy yyyy,OU=PST
Override,OU=Standard Users,OU=People,DC=xxxxxx,DC=org" was not changed.

Voicemail not working after several IP phones are in busy/not answering mode

Hi all,
I have a problem regarding our voicemail system using a CME-CUE infrastructures. It seems that if our Sales and Marketing dept are all busy or no one answer the call it will call forward to the other dept (Reservation).
In reality the voicemail auto-attendant will prompt the client if nobody answer the call in our Sales and Marketing dept.
In our office we have 2 sets for grouping of phone lines. ( Sales and Marketing / Reservations )
Tel : 6737 6696 - Sales and Marketing
Tel : 6737 9955 - Reservations
Now what caller calls 6737 6696, there are a few numbers in the queue and if these numbers are not available, it should be diverted to voice mail. However now the calls are coming into 6737 9955.

I just resolved my own issue :
By removing some extension number included in the ephone-hut 1 config
The following example defines sequential hunt group number 1. When callers dial extension 5601, the first phone to ring is 5001, then 5002, 5017, and 5028. If none of those extensions answers, the call is forwarded to extension 6000, which is the number for the voice-mail service.
Router(config)# ephone-hunt 1 sequential
Router(config-ephone-hunt)# pilot 5601
Router(config-ephone-hunt)# list 5001, 5002, 5017, 5028
Router(config-ephone-hunt)# final 6000
Router(config-ephone-hunt)# preference 1
Router(config-ephone-hunt)# timeout 30
Router(config-ephone-hunt)# exit

Windows 8.1 wifi not working after sleep (and other various bugs)

Hello Apple support forum, this is my first post!
Alright, so I just switched to my first mac. MBP Retina late '13. I bought it primarily to run windows, and to also of course use OS10.
My issues in bootcamp however are getting annoying. My Wifi shows up as connected after I resume from sleep, but my mac won't let me disable wifi, enable airplane mode and then re-enable wifi, nothing. The only way to get wifi to work when resuming from sleep is to reboot.
I just set hibernate when close lid on all my power modes, and basically disabled sleep for now. Hibernate works fine for now, but sleep is much faster from resume and also I'm not sure if the machine will wake up from a simple tap on the keyboard or opening of the lid, I think I have to actually boot it all over again anyways.
My other minor but still annoying issue is my titles of windows in windows are showing up as black (screenshot here)
the only other thing I was curious about was the dual-gpu functionality. I know from reading these forums it's probably not possible because of the hardware and software mesh apple created for OSX and their dual-gpu design, how it wouldn't really work in windows. I'm just wondering if anyone ever got this to work in windows maybe on the older retina MBP or older macs, or if anyone is making progress on trying to fix that in windows? I bought this laptop expecting that to work, even the geniuses at the Apple store said it would be possible, I was misled and might have second-gussed buying a 3k machine if it would only get a few more hours battery than my old Vaio. I bought this machine primarily for battery life.
I'm just remembering another tiny tiny issue. When I plug headphones in the headphone jack in windows, it doesn't automatically switch to that audio output, I have to manually do it in audio settings, is this a bug, have I configured something incorrectly, and is there a fix?
One other thing is my dpi settings, I have it set to a larger font and everything because at stock it is SOOO tiny. my question is, is there any way to smooth out text in other apps, my browser and apps like rdio look like crap unless I leave the dpi settings stock, which I basically need a magnifying glass to use (I tried that for a week lol. Not the magnifying glass tho haha)
I know I'm rambling at this point, but in the windows 8.1 camera app, sometimes my camera does this bug where it flips between inverted and normal, extremely quickly, so it looks like there are two of me. I don't know if this was GPU drivers tho, because just reinstalled those this morning and it seems to be ok so far.
also, the keyboard. I miss my context menu key, what do I need two command keys for? A right alt button, I'd rather have that be the other control button. Any way to remap these easily? what about switching Fn with control on the left, I prefer my windows button in the exact corner.
last question tho, I saw people overclocking gpu's on their retinas from last year, can you do this on the new retinas, and can you overclock the cpu as well as the gpu?
I do have to say this in the end, I am a little dissapointed with apple, I was told thst my mac would run windows like a native windows machine. I know windows 8.1 is not supported, but coming from PC's for years, and being a PC technician, I also go to school for computer engineering, I expected everything to "just work" as steve jobs once said. Well, it doesn't just work. I even had these issues in windows 8, which is supported.
Installing windows 8 was a nightmare. I had to use the forums, try for weeks to get windows 8 to finally instll the proper (uefi) way, and to get everything usable, I had to reinstall my os's twice.
Apple, if you are going to advertise a mac that can run windows "seamlessly", you need to get these major issues fixed, support all new versions of windows before they are even release, and release proper hardware drivers and support software before new hardware is released. All other Windows OEMS are pretty much required to do this to stay in business. I don't dislike OSX, I just use windows for everything I can't use Mac for, so please fix this. You're better than this, you should put a higher standard on this. otherwise, don't advertise macs that can run windows.
Thanks guys, sorry for the information overload. BTW, MBP Retina 15" 16GB RAM 512 SSD, 2.6 haswell, pretty much the max specs other than the SSD.

I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

DHCP Server does not work after Exporting and Importing Using Netsh Command

Hello Friends :
I had two dhcp servers in windows server 2003 server , I have upgraded one of them to windows server 2008 32 bit and again i installed a windows server 2008 R2 as an additional Domain Controller , the last scenario was like this :
srv-1 : windows server 2003 + DHCP = working with no problem
srv-2 : windows server 2003 + DC + DHCP = Worked without problem
srv-3 : windows server 2008 R2 + DC = worked without any problems
I exported the DHCP server configuration on the srv-2 using netsh dhcp server export and Imported them to srv-3 using the
netsh dhcp server import command , the command completed successfully and i can see all of the scopes without any problems and errors , i have authorized the new server without any problem , all scopes are activated without any problem so i
disabled the srv-2 DHCP service and unauthorized it from active directory , the problem is that the new server semms that does not lease any address to clients !!!
1- I have authorized it
2- I used Rogue Checker tool in client computers they see authorized server without any problems
3- The same tool in workgroup only shows srv-1 as the DHCP server and does not see other DHCP servers
4- Bindings are OK and DHCP servers only have one NIC installed on them
What can i do to make sure my srv-3 DHCP server will work on the network ?
thanks ...
MIMO

Are the clients on another network so you need to configure a DHCP relay agent?
If you load up perfmon on the dhcp server and remove all counters and then add DHCP counters. Do you see any dhcprequests when you reboot your dhcp clients? This will determine if your server actually receives any dhcp requests.
Have you check event viewer for any warnings or errors?
And the classic one restarted the dhcp server service (or reboot)?
Regards Per-Torben Sørensen http://pertorben.wordpress.com/

Office web apps feature not working after setup and configuration?

Hi I have installed the SP1 update and since then my office web apps features are not coming up in SharePoint. After running the updates and attaching the farm back i see the bindings and settings are applied but somehow the office web apps features are
not coming up in SharePoint. Can someone let me know what might be the issue?

Did you delete and recreate the WAC farm after you updated?
See: https://technet.microsoft.com/en-us/library/jj966220.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

3rd party plugins not working after archive and install

hi,
i have a few 3rd party plugins in my logic pro, such as all the native instruments, waves diamond, ik multimedia plugins, atmosphere and a few more,
i was getting an error on my g5 when i tried to run diskwarrior from the disk. it was the kernal panic message, it said i had to restart my mac, therefore i couldnt run diskwarrior from disk.
i did a bit of research and a few people suggested doing a archive install, so i did.
well what do you know, i had to re-install logic 8 again. other programmes such as transcribe, itunes idvd imovie etc were ok.
but logic didnt load up, o i had to re-install logic again,
also before i did that i checked to see if my 3rd party plugin were working in standalone, so i check all the native instruments and they seemed to work ok, T-racks deluxe works fine, so i thought they should all load up in logic.
once logic was installed again and had to get all the updates all my 3rd party plugins did not show up on my AU validation.
is there a way to get logic to see my 3rd party plugins or do i have to re-install all of them again.
cheers for the help
lib

Then check if the NI AU components are actually where they should be:
HD/Library/Audio/Plug-Ins/Components
If not copy them over from your "previous systems" folder which was created on your HD during the archive and install process.

ITunes still not working after uninstall and install. Help?

iTunes hasn't opened on my computer for a few weeks. Before uninstalling, I went to Control Panel and chose the 'Repair' option which did nothing. I ran a scan to see if there a virus, came up clean. I uninstalled it completely and reinstalled the latest version and it still will not open. Any ideas? I want to put new music on my iPhone and can't because iTunes refuses to work.

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

Voicemail not working - after removing and adding Dialplan

Similar Messages

Maybe you are looking for