Volume goes away when i connect ipad to aux from carradio?

When I connect my ipad to the aux in my car there is no noise left.I got already a new cabble in the apple store,does not work.Do i need to change settings on i-pad?

I've seen this before to Aux connections.
I have an iPhone with a Griffin FM transmitter. I can listen to the ipod through my car radio all day with no connection problems. If I send the audio from a youtube video to the FM transmitter, it turns off after about 30 seconds. For some reason the Youtube app doesn't "keep alive" the connection to the aux device (FM Transmitter).
If I start up a song from the iPod app first and then switch to Youtube and play audio from there, the connection will then be kept alive.
Not sure if this helps you, but that's my experiences with audio out through the dock connector.

Similar Messages

  • HD noise when flat, goes away when tilted back now wont boot

    hey guys... i've been reading some of the discussions about HD noises and sounds. it seems like everyones HDs make noise or slow down when tilted. I HAVE THE COMPLETE OPPOSITE PROBLEM. i apologize for the long post:
    12" Powerbook [purchased 05/04 and well taken care of]
    mac OSX 10.3.9
    original toshiba HD 60GB
    its kind of weird. i was running ichat, iphoto, safari, photoshop, and iflash [flashcards] all at the same time when i noticed a significant slow down in performance which stalled all programs. i then head a loud whiring humming buzz that sometimes turned into grinding. of course this freaked me out. i tilted my powerbook backward to give it a listen and then the noise went away. not only that all the programs completed all previous requests faster than ive ever seen them perform before. well i repeated this to see if the effect was reproducable, and it was.
    well the next morning i turned it on and my powerbook was working fine. no noises or indications impending failure. well i had to leave the library so i shut my powerbook off but the filevault program wanted to recover unused HD space so i let it do its thing. when i tried to power on my powerbook it got to the grey screen with thespinning gear and wont get past that point.
    figuring that it was an HD problem, i got my buddy's ibook, set my powerbook into firewire mode by booting and pressing "T", and connected them. i was able to recover data off of my non admin accounts using Migration Assistant but my main admin account wont let me even touch its files due to the filevault settings. i found away to at least get to my files in the main acct by mounting its .ars [i think thats wht it was] image i found under my non main admin account user folder. the thing that gets me is that i can easily access my HD in firewire mode, but the powerbook itself wont get past that grey apple screen. it makes unusual noises and then stops and stays stuck on that screen with the spining gear going.
    now this is a major headache since im a med student and i need my powerbook to access my flashcards, notes, and online resources. ive come to realize how dependant ive been on this machine. can anyone help me? is it my HD thats the problem? is it a filevault thing? do i just need to reformat? why do i get that sound when the PB is flat but it goes away when its tilted? now im kicking myself in the butt for not getting applecare.
    thanks guys,
    Edward
    MS2 Ross University School of Medicine
    evilmcnasty.blogspot.com

    Edward:
    Last week, my PB started making the same noise that you've described, which is opposite of the other posts, ie buzzing when flat, quiet when tilted. I ran disk utility, TechTool Deluxe (that came with AppleCare), etc without finding anything wrong. Yesterday, I noticed that my s.m.a.r.t status shows my hard drive to be failing (in red letters). My understanding is that it will fail eventually, even though I am using the computer without incident right now. Suffice it to say, I have backed everything up and am waiting for the inevitable moment. I plan to call AppleCare today (sorry to hear you don't have it) to enquire about what I should do. In particular, I cannot go without a computer right now, this malfunction being at the least opportune moment. Can anyone say if AppleCare will give me a loaner until my PB is healthy again?
    I realize that this post is of little use to your situation, but I just wanted others to know that the "opposite buzzing sound" exists and that it seems to indicate an eventual failure if mine is the typical result of the first buzzing symptoms.
    Good luck with yours.
    Ernie

  • When I connect the USB dongle from the camera connection kit I get an accessory not supported by iPad message. The card reader triggered the same msg but works now. Same msg with vga. Have tried rebooting

    When I connect the USB dongle from the camera connection kit I get an accessory not supported by iPad message. The card reader triggered the same msg but works now. Same msg with vga. Others have posted this problem but the only suggestion anyone has offered is to reboot, which doesn't help. I've tried.

    Thanks Fred. The nearest Apple store is about two hours away, so we did the next best thing & took it to Best Buy. It stumped the "Apple Guy" there. Apparently when an Apple product is turned on it works. Period. I'm impressed that the products are normally so dependable--it just stinks that I got the one in a million that's not. Anyway, now we wait for a service call Tuesday morning. Thanks again!

  • When I connect ipad to computer and go to itunes, it will not show my ipad on the left-hand side on itunes page.  message on winzip says i need pro level winzip program.

    When I connect ipad to computer, itunes does not show ipad on left side of page.  winzip appears and says need pro version.  i have apple id, etc. and have dowmloaded music to ipad previously.  What do I need to do to get it to recognize ipad?

    Did you set the iPad up on a Mac? I set mine up on windows and my Mac wouldn't read it so I started over. Just a thought though, not sure if that's your problem.

  • TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

  • After iTunes 9.2 installation, when I connect iPad, iTunes opens a page (un

    After iTunes 9.2 installation, when I connect iPad, iTunes opens a page (under my iPad link) with a note *Looking for something on MobileMe? We can't find the page you requested* ...
    That was not the case with iTunes 9.1.
    I am not a mobileme subscriber. I think I register for try out period long time ago, but I am not a subscriber.
    Now I cannot even log in to this account, even though I can change the password!?
    It is quite frustrating not be able to sync to my Mac.
    I deal with this problem for several days on many ways, but there seems no progress.
    Thanks!
    Tadej

    I just solved the same problem, syncing iPad with iTunes 9.2 and not-wanted mobileme login. It took me half an hour on the Apple phone support.
    Safari > Reset Safari ... and Safari > Empty Cache ... did the thing ...
    Strange, but it works!
    Message was edited by: Maligoj

  • My screen dims intermittently to almost completely dark, it goes away when I press the top button but, it is annoying.  what is wrong?

    My screen dims intermittently to almost completely dark, it goes away when I press the top button but, it is annoying.  what is wrong?

    Try the standard trouble-shooting steps: Restart, Reset, Restore. If these don't solve the issue then you may have a hardware probem. If so, contact Apple Support.
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"
    Restore: Use iTunes on your computer to Restore your iPhone to as new.

  • When i open ibook, the iTunes store asks for my password. it goes away when i press cancel or when i put in my password. why is this happening?

    When I open IBook, the ITunes store asks for my password.  It goes away when I press cancel or enter my password.  It seems unnecessary to me.  Why is it doing this?  I already paid for the book. 

    If you are trying to update information for your apple id then go to appleid.apple.com and click on manage your apple ID... you'll probably have to enter your old email address/password

  • Repeatedly prompted for a wifi network when already connected (iPad Air 2 / iOS 8.1.3)

    Hey there
    Subject says it all: since the iOS 8.1.3 update on my new iPad Air2 Wifi/GSM 128GB, I keep being prompted to choose a wifi network even when already connected to my home network or tethering on my iPhone. It's quite a pain to type a mail when I have to stop every few seconds to answer or cancel this stupid prompt window.
    Oddly enough, it works all right on my iPhone (otherwise, I'd use 4G).
    Anyone's got a nice trick to end that issue? Thanks in advance.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

  • Laptop screen goes black when HDMI connected to TV

    I have a Thinkpad Edge 431. I've set it up in Control Panel to duplicate both the laptop and the external monitor when connected by HDMI. It works fine.
    When I connect it to my TV, the laptop screen black. The TV displays "No Signal" until the HDMI connection is made. When the laptop screen goes black, so does the TV screen. No sound or picture.
    This was working fine until recently, and I can't figure out if I somehow changed settings to make this happen. It's clear that to me that the HDMI port on the laptop works, as does the cable.
    The TV port works (I've switched the connection on the cable box to each HDMI port on the TV, to make sure they work).
    I can't change anything in Control Panel when I connect the HDMI, because the screen is black.
    I've updated the Lenovo system.
    The other relevant piece of info: the Intel Graphics Card control panel says that Monitor/TV Settings are not supported (although until recently, I could easily display the computer on the TV).
    Can anyone help with this? Thanks!

    No video and audio signals to the tv connected

  • Music volume gets low when iPod connected to an iPod interface?

    hi,
    i have a 4th generation ipod, when i connect the ipod to the ipod interface in my car the volume gets very low.....
    i have tried connecting my ipod in others cars with ipod interface, its the same issue with the others system also....
    but it works good when connected with aux.
    please help me find a solution....
    thank you

    This is normal - cant adjust the volume from the iPod if we connect it via dock (the bottom of the iPod). If you would like to adjust the volume with the wheel of the iPod, then you should plug your iPod via its earphone jack - of course, different cable i.e. minijack to RCA audio cable

  • Freezes when i connect ipad 2

    When i connect my IPad 2 to my itunes, it sync's and the freezes during the update.   Any suggestions how i can stop this from happening?

    I'm not big on windows stuff, but the first thing to do is make sure iTunes is up to date, and making sure windows is up to date also.
    To get the iOS, go to Settings>General>About>Version
    It should be 5.0.1
    Also, i just re read your question, are you using iTunes to transfer your music?

  • Nokia 5530 xpress music: The volume goes down when...

    Hi All
    I hope all of you are fine
    Nokia 5530 xpress music: when I play the music without Nokia headset the volume seems great but when I play the same song with headset the volume goes down.
    is the problem from Nokia Headset or from the mobile itself?
    Thanks in advance

    I think this is Normal.
    Otherwise It wouldn't do your hearing much good if you set the volume to maximum and then plugged in your headset
    If this Post is helpful. A click on the White Kudos star is always Appreciated
    Last Nokia: Nokia Lumia 800
    Current Phone: A Non Nokia Device
    Previous Phones:Don't Ask ;-)

  • ITunes does not start when I connect iPad

    Until about a month ago, everything worked perfectly. When I connected my iPad to my MacBook Pro, iTunes started automatically and then started the sync with my iPad, just as I had set it to do. About a month ago, however, iTunes would not start automatically. I have to manually start iTunes. Once I do, then everything syncs normally, no problem. I have checked, and the check box in iTunes is checked "Open iTunes when this iPad is connected." I tried a general reset of the settings on my iPad. Nothing changed. iTunes says it is the most current version (I just checked) and my iPad says it has the latest available iOS version.
    Any suggestions? I can live with this like it is, but if there is a problem, I'd like to correct it before iOS 5 comes out.

    Thanks to all who replied. It turns out that, as you suggested, for some reason the iTunes Helper applet wasn't there. Did a reinstall, and now all works fine. So now I know that if I never have this problem again, that will be my first stop.
    As for the other suggested that were made, these are all great suggestions and these are steps I had already taken in troubleshooting the problem. I didn't mention that, so I am glad to have this documented if anyone one else does a search and is looking for an answer. By all means, be sure you do what the other folks said first, and if they don't work, then go for the iTunes Helper applet. That did it for me.

  • My computer freezes when I connect iPAD

    When I connect my iPAD, the computer, the mouse and the keyboard freeze...

    I had this trouble too if you restore your ipad you will see the difference some of my friends had the same problem and when they restore their ipad they were very happy

Maybe you are looking for

  • HRULNDFL and division of taxes and bases

    Hi Experts, I need help! Report for 2-NDFL  (program HRULNDFL) uses the the feature 33OKT. The feature determines the object ID of your company's detached subdivisions, as stored in Organizational Management and feature returns the object ID of the d

  • Purchase Req and Goods Receipt

    My client has ECC 6 and EP 7 in the landscape. I am implementing Employee Self Service portal. It looks like standard Purchasing Requisition and Goods Receipts iviews (ESS package) are pointing to SRM. We are not implementing SRM here. Is there any w

  • How can i turn a part of a text of  a JTextArea into bold??

    how can i turn a part of a text of a JTextArea into bold?? I mean i just want the selected text to do so and not all of the content of the JTextArea. Is there a way to do so?? If not, is there another component that i can use to do so?? [Rik]

  • OVR1 and SR10 not modifiable in production system.

    Hi all, We would like tcode OVR1 and SR10 to be executable in our production system. We want to skip the change request needed to push the new entries from our development all the way to our production system. I want only to activated the possibility

  • Windows media player to Quicktime

    Hi; Can anyone please help with how to convert wmv files to a format the Quicktime can play? I have QuicktimePro v.7. Cheers