OVR1 and SR10 not modifiable in production system.

Hi all,
We would like tcode OVR1 and SR10 to be executable in our production system.
We want to skip the change request needed to push the new entries from our development all the way to our production system. I want only to activated the possibility to create the OVR1, SR10, SR11 and SR12.
Here is the message we get when we try to create in our production system
Message no. TK430
Diagnosis
The system administrator has set your logon client to the 'not modifiable' status.
Client-specific objects can not be changed in this client.
System Response
The function terminates.
Procedure
Contact the system administrator.
For more information, see the SAP Library under Change and Transport System.
Regards!
Curtis

To All,
The OSS Note 812002 will deactivate the transport requirement.
There's a config in Solution Manager that must be set also.
When I get the full Solution I will post it here.
Regards!
Curtis

Similar Messages

OB52 :- Open and Close Posting periods Due to not modifiable of PRD system

Dear All,
Due to not modifiable status two transaction could't be done in the PRD System.
This is IMG activity under the following.
1. OB52 :- Open and Close Posting periods (FA -> FA Global Setting -> Document ->Posting -> Open and Close Postinfg periods
2. OB08 :- Enter Foriegn exchange rate. (Gen Settings) Enter foriegn exchange rate
These transaction are to be executed regularly and directly in the ECC6.0 Production system is not possible due to non modifiable status.
Please help me regarding this issue

Check Note 77430 - Customizing: Current settings
Markus

Transporting role menu and workbook created diurectly in production system

Hi gurus,
We have several workbooks (and queries) that are created directly in production system. thoose workbooks are connected to a role that is created in development system and transported to production system.
Now, we would like modify this role in development then tranport it on production system, but we are afraid that will be wiped out (overwrite) our production system workbooks (because the role not contains this workbook in development).
Could you please explain to us what we have to do in order to not wiped out our production workbooks.
Thank you in advance

thank you, it's more clear for me...
Exactly, to have all my requests and workbook in development, I tried to use "Transport order of copy (it means transport queries from Production system to development system)", then to connect them with the corresponding roles in development, but I have the think that BW considers them as new requests when I re-transport them again on the prod.)
Could you say me if i can transport my production system queries on my development system, and manage them in this system (development) in the future.
Thank you in advance

Importing parameters not available in Production system

Hi Experts,
I am facing an issue after moving my objects into Production system.
I have created a calss and which contains five methods. Each method contains itsown importing parameter. There is one method to send mail, which contains three importing Parameters. I have captured this class and the methods in a TR and basis team moved this TR into production system.
The TR has moved successfully into the production system. But when I checked the Parameters of the class SEND_EMAIL has only one importing parameter insted of three.
Again I created a new TR and captured all the objects related to Class, which contains class definition, methods etc.
I have moved it to quality system successfuly. When I checked in quality i can see the three importing parametrs in SEND_EMAIL method.
This TR has moved to Production successfully. When I checked in production I can see only one importing parameter in SEND_EMAIL method.
But it is showing same active version in Quality and Production.
Please suggest me how can I resolve this issue?
Thanks
Pradeep.

Dear Pradeep
First you check the parameter which u are sending that are already in prd server exist or not
some there are some thing we can see which are available in qua those are not seen in production
see in se06 and try to modify the exact component to modifaible state
check sp pack of qua and prd are one and the same
check kernal rel level in both
check chmod and chown are same in both
Regards

Role not displayed in Production system

Dear all,
I have CUA set up (CUA is configured in solution manager), and I assigned 10 roles to a user in solution manager using SU01 and selected Production system while assigning roles and the roles were already existing in production system.but after role assignment to the user, I verified in Production system and I found that they are not reflecting in PROD. Infact, I have done user comparision but still no change.
Please let me know do I need execute SCUL by selecting the User ID.
If yes please let me know the steps to execute SCUL.
Your help is much appreciated!
Many thanks
Anil.

Hi,
Please go to the Transaction SCUL, and give the user id and the system as the prodution system ID (eg. PRD100). By default the Error, Warnings and Unconfirmed Distribution will be already checked. Do not change them and then click on Execute.
If you receive the message saying No Data, then it means that the IDOCs for that user were successfully pushed from CUA to the production system.
But, since the change was not reflected, when you execute, you will be able to see the status where the IDOC is struck. Expand the tree and see the nature of the error, and try to resolve that error. And then select the entire tree and click on the Distribute button.
It will give you a pop up, let all the checkboxes as it is, and continue. After the distribution is triggered, you will get a message in SCUL.
Refresh the SCUL data, and you should be able to see the current status of the distribution.
If all the data is cleared in SCUL, you can log into your produciton system adn check the users roles. New role should be visible there.
I hope this will clear your doubt. Let me know if you have any questions on this.
Regards,
Sneha Vyas.

Support message and change requests only for production system

Hi guys,
I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
Kind regards
Rayko

Hi Rayko,
We do not have this option.
Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
Best Regards,
Fernando

Infosets are not display in production system

hi,
I am new for this topic ..
I got the production system acesses through client..as per client they send some document regarding infoset which are already created in sapbw database ..but in sq02 and sq01 there is no display of created infoset ...
don't give any urls for this topic plzz explain in few words..
plzzzzz ..urgent
regards,
goodyear..

Procedure
In the InfoSet: Initial Screen, choose InfoSet -> Additional Functions -> Adjust.
This takes you to the Log Display dialog box. The system shows you errors and warnings in the same way as when it is checking or generating an InfoSet. There is an additional Adjust pushbutton on the pushbutton toolbar.
Choose Adjust.
The information from the data dictionary is copied over into the InfoSet.
Choose Generate.
It's recommended that once you have adjusted the InfoSet, you also adjust all the queries belonging to this InfoSet. This ensures that the technical properties that have been changed are also copied over to the query definitions.
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/cb4044455611d189710000e8322d00/content.htm
Hope it helps!
Bye,
Roberto

Field audisp MRP-relevant not modified in Production Order.

I would like to know if there is a way (Exit, BADI, customizing, etc) to modify the field Field audisp MRP-relevant before or after add a new component or operation in a production order. The system always get the value form the customizing of the production order type and I would like to change this field to other value 1 to 3 for example.
Thank you in advance.
Regards.

Hi Alberto
Can you please provide more details of your business requirement? On which table would you like to change this field? Do you want to make an order not relevant to MRP or a reservation?
You can make any MRP element not revelant to MRP dynamically (don't neet to change anything on the table) using BAdI MD_CHANGE_MRP_DATA.
See this blog for more details:
Making an element not relevant to MRP or MD04 using BAdI MD_CHANGE_MRP_DATA
BR
Caetano

Line Breaks are not appearing in Production system

Hi,
In my company users have one problem, which I am not getting the same either Dev or Quality. I tried to replicate it but I am getting fine without any issues. Issue is users create sales order in Interaction Center by using the credit cards. We wrote the code to pop up with the information about the amount being deducted against each card( users can use multiple cards) once the order is saved.
Below is the code in one method of the class. lv_text contains the information like 'Visa 3002 for amount 1209.00 is authorized(#1567)'
CONCATENATE lv_text ' ' INTO lv_text SEPARATED BY cl_abap_char_utilities=>newline.
Problem is in Production we are not getting line breaks whereas I am getting fine in Dev and Quality with the above code. In production, users are getting below. There is full stop between the amount(#1567$) and .
Visa 3002 for amount 1209.00 is authorized(#1567). Visa 5443 for amount
1300 is authorized(#7654). 
But in Dev and Quality the same above message we get like below, which is correct.
Visa 3002 for amount 1209.00 is authorized(#1567).
Visa 5443 for amount 1300 is authorized(#7654).
I changed personal layout values in the Personalization and tried but no use.
Can anyone help me in this regard?
Thanks,
Baasanthi.

Hi Andrei,
I am closing this issue as it is being taken care by team lead.
Thanks,
Baasanthi.

I changed an existing abap query ME80FN but not find in production system.

Hi,
I have changed an ABAP QUERY ME80FN for user group SAPQUERY/ME in Dev system via transaction SQ01 & SQ02.
But when I am searching for same query in Production via transaction SQ01 it is not existing.
Please give me some inputs.
Thanks,
Jwala

Hi Jwala
1. Check if that ABAP query is transported to production or not.
or
check the versions of the ABAP Query in dev w.r.t Production so that you will know the status of the program in production.
regards
PBI

Smartforms program not regenerated in Production system.

Hi Guru's,
i have done changes in smartforms on development server.that time my smartforms generated and work properly. But when i transfer request then on production server in smartfroms is generated but my smartforms generated program '/1BCDWB/LSF00000040F01' program not update. in that program whatever changes i have done that not update.that's why it's give me dump error .
Please Tell me it's abap problem. if yes then help me.
Thanks in Advance.
Regards.
SAM
Edited by: Julius Bussche on Dec 15, 2008 11:23 AM

Hi Sam,
Use SSF_FUNCTION_MODULE_NAME. In this pass ur form name for ex,
DATA :
fm_name TYPE rs38l_fnam.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 formname = <your Form Name>
 IMPORTING
 fm_name = fm_name
 EXCEPTIONS
 no_form = 1
 no_function_module = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Now first call the Function Module which is generated from ur smart form. Now replace its name by fm_name. For Ex,
CALL FUNCTION /1BCDWB/SF00000201
 EXPORTING
 im_1 = fs1
 im_2 = t_1
 im_3 = t_2
 EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Now replace /1BCDWB/SF00000201 with fm_name.
So finally you will have,
CALL FUNCTION fm_name
 EXPORTING
 im_1 = fs1
 im_2 = t_1
 im_3 = t_2
 EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Swapna.

We made a purchase and did not receive the product

we purchased 6 lp for $2.99 in Sims free play and received the receipt but not the product

I've tried, said they could not help and I should get in touch with the USA App Store. But the problem of getting in touch with the App Store USA is the only option I have on the phone, and my English is not very helpful. Therefore needed a complete address e-mail.

Ipod and apps not working after operating system download

After downloading the new operarting system on my new ipod touch, app icons show but they wont open. I tried everything. dont know what to do.

I would try restoring the iPod from backup. If necessary, place the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

My mobile-me email accout does not receieve any emails and does not show the file system

hi - my mobile me email account does not recieve any emails - plus, the file structur is not available on my mac. I am using iphone and ipad, there at least the file structure is visible. I received the notification, that my icloud storage is not sufficiant, I extend this to 80 GB, should not be an issue anymore. However, does not work - I can however sent emails...many thanks for any help

Just to confirm ... by Verizon Web Portal, you mean the Verizon branded Yahoo! web portal page? Correct?    Just want to be sure you're looking in the right place.
If you go into your account settings on Verizon, does it say there that you are the "Yahoo!" experience (probably also has an option listed to allow you to change to AOL as well).
If it says Yahoo! and you are looking on the Yahoo! web portal inbox, then it sounds like your mapping over to the Yahoo! side is not setup properly within the Verizon cloud.   That would take a call to tech support to fix.
Just for giggles, have you tried changing your mailbox password (and not recofniguring any mail clients, etc.).   Just to make sure something isn't quickly grabbing the mail and downloading it before you can see it via the web portal.   Might want to do that just as an experiment.
Another think to try is creating a sub-account for email and see if mail gets delivered to the address.

Timers do and communication not working on RT system on PXI chassis

I am having problems with my application when I "Install it to a real-time target". When I run the program in debug mode everything works fine.
I have two programs. One runs on a real-time OS on a PXI chassis Controller (Client). The other runs on my Windows 7 PC (host).
When I run the Client application in debug mode (Run->Debug Project) everything works fine. When I run the Client application in the release mode (Run->Install Program to Real-time execution target) things do not work.
It appears that the timers do do start. The Client application does receive communication sent from the Host application but is not able to send communication from the Client to the Host.
I have been fighting this for a while and have tried to get help through emailing the support but have not had much luck that way. I think I need a phone call with an application engineer.

It is not LabView. I am developing software with LabWindows\CVI. I've seemed to narrow things down a bit. When I send a message to my application on the PXI Controller it is calling a function PostDeferredCall(...). The deferred function is never called. Not sure why it works when I am running the code in Debug Mode but not when I install it on the target. In my while loop in my RTmain() function it looks like this:
while (!RTIsShuttingDown () && !gDone)
  /* Your code. */
  /* Sleep for some amount of time to give the desired loop rate */
  /* and to allow lower priority threads to run.                 */
  SleepUS (1000);
  ProcessSystemEvents ();
I thought the deferred function was supposed to be called in the Main thread? Not sure where it is hanging up yet.

OVR1 and SR10 not modifiable in production system.

Similar Messages

Maybe you are looking for