VPN pptp give users their own IP address

Hello,
I have an Cisco router 891.
On this router there are to different networks.
When user1 is logs in with the vpn I wou like that he gets an addres like 192.168.0.200.
When user2 logs in, I would like for him to get the address 10.0.0.200.
I don't have access to a radius server or something so it must be configured inside the router.
this is what I got on this moment:
vpdn-group 1
accept-dialin
protocol pptp
virtual-template 1
interface virtual-template 1
encapsulation ppp
peer default ip address pool vpn1
ip unnumbered Vlan1
no keepalive
ppp encrypt mppe auto
ppp authentication pap chap ms-chap
ip local pool vpn1 192.168.1.200 192.168.1.209
vpdn-group 2
accept-dialin
protocol pptp
virtual-template 2
interface virtual-template 2
encapsulation ppp
ip unnumbered Vlan2
peer default ip address pool vpn2
no keepalive
ppp encrypt mppe auto
ppp authentication pap chap ms-chap
ip local pool vpn2 10.0.0.200 10.0.0.209
I have read somthing to add a domain name to the virtual-template but the router doesn't seem to know this.
Can some tell me if it is possible an how?
thank you!
Best regards, Edwin

As i expected this was not casued by the cahnes made to the network. This is a known bug from Cisco, however due to the fact this is only occuring with IPSEC thick client which is EOL they are not providing a fix. workaround is to move to anyconnect client.
Hope this helps someone else.

Similar Messages

I can't update iWeb. Error message: "The disk may be damaged or full, or you may not have sufficient access privileges." I had received a response that gave me the "best" FTP, it was one that gave each iweb user their own support person. Need info again

I keep getting an error message, sometimes the beginning part changes but it always ends with the quote above. I haven't had the time to work ont his in a few weeks, but weeks ago I got a response that indicated the "best" FTP to use, because they give each iweb user their own support person with whom the user can speal everytime, instead of getting as new person each call/email.
I am currently with 1&1.co.uk, which was recomnmended to me by a friend who is much more website intelligent than me: he designs websites for a living. They may very well be very good for someone who knows what they are doing, but they are not so good for me or for Apple users. Since I am paying every month for not being able to get updates published, I would be willing to pay for an FTP which would give me, a novice, resal Apple support. I also do not want to have to completely redesign my website or loose my website address, so I want to transfer the whole critter to a new FTP.
Thanks
Resolute Woman

Here's the hosting that gives you a personal support person...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
As for your problem, try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
Also check the files you are trying to upload - especially image files - for spaces or special characters in the file name.

How can I take 3 devices off of my email account and give them their own account. We are sharing storage and need to each have our own account.

Everyone in my family has an iPhone or iPad and they are all on one email account. How do I take them off and give them their own accounts so I can have my storage back?

Have them delete the iCloud account (your email address) on their devices then let them create their own iCloud account -> http://support.apple.com/kb/ht4436. If all of you are syncing contacts and calendars on the same iCloud account, they have to re-organise those stuffs once they have their own iCloud account. When you delete an iCloud account, it normally asks what would you do for the synced information - keep it on the iOS device or delete. If they choose to keep the synced information (e.g. Contacts and Calendars), they have to delete those thare aren't theirs or they can start from scratch by deleting the synced information from the iOS device. Hope this helps. Cheers!

Giving each User their own document folder

I have a requirement in a Sharepoint 2013 setup wherein I've to give access to external users to a document library. Each User will have a folder by their name, and would be allowed to ACCESS their folder ONLY. They are not even allowed to see each other folder
names. They can anytime upload additional or delete the existing documents. External Users are setup using FBA.
Inside the network, there is a Windows user who'll have access to all the folders and documents of that library. I don;t think standard document library can handle this since there is no "Deny View" Permission in Sharepoint.
Sharepoint Folks - Please guide what will be the best way to handle this kind of requirement.

you can do this by breaking the permissions of your document library.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0c6e0dd7-af51-4d99-960f-c510169da55b/folder-permission-in-sharepoint-foundation-2010?forum=sharepointadminprevious
http://www.youtube.com/watch?v=lFG9Disd3SU
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
No, this does not help. I want to hide the folders and the documents which does not belong to other users.

HT1277 Can Alias accounts be converted to their own email addresses?

I would like to split off two of my Alias Identities, that are on the same Apple Account, into separate mail accounts.
Can this be done? Would I have to attach them to new Apple Accounts or can I just have multiple mailboxes on one account?
Thank you in advance for anyone that can help.
Tarik

You said it better than I. That was my point, too many mail "endings" and you may be right, they can't fix it.
No one likes to change their email address, but c'mon Apple...just pick one! I couldn't combine my Apple ID's when I whent to mobile .me, that's partly how I ended up with 3 addresses. If .iCloud is the newest and latest, then let's change all of them to iCloud. If they want to use all .me, then let's change them all to .me. But, pick ONE and stay with it.
Thank you for your confirmation. Sometimes I think it's just me that feels this way. Unfortunately, I'm moving away from Apple products because of too many restrictions and too much confusion.

Does everyone need their own email address?

We have four devices in our house. itunes is set up under my email. When I updated my daughter's ipod touch, I entered my email for imessages. However, now I can't use my email on my ipad. To make matters worse, I do not how to get my email off her touch. Everytime I think I've deleted it, it shows up again.

Ansuz82 wrote:
Technically it does. However, since the iPhone can not get MMS messages sending a pic to the MMS email address would just direct you to viewmymessage.com
I figured it most likely did, but for reasons you stated it seems irrelevant.

Giving users control of their own distribution list control to add or remove external email addresses from their list

We are a Exchange 2010 SP3 shop, we have distribution groups (with over 200 email addresses ) from another email system which has only external email addresses (i.e [email protected] [email protected] and so on …..)
We want to import these groups into exchange. we called microsoft, they said create mail contacts for each address and put those in a Distribution Group. I know this will work.
Our goal is to have the user create / maintain / add / remove external their own email addresses (Not the IT department)
There must be many companies whose requirements match ours. Are there third party tools that would handle creation of distribution list?
Any constructive advice would be greatly appreciated ! THank you

I wouldn't give the ability to create contacts to everyone in the environment because it will become mess at some point of time and IT will have to jump to control it
anyway so why don’t from the start...
I would give this to certain people like Leads or Managers of the groups under certain IT Policy so it will be still under control and people
will think before asking their superior to create them and someone gets responsibility to manage these contacts...
Though here is the more specific article on how to delegate creating and editing contacts...
Creating RBAC Role To Delegate
Editing Contacts
Blog |
Get Your Exchange Powershell Tip of the Day from here

I have two cell phone, different numbers. Each has their own apple id. How can i merge them so apps on one show on the other but keep their emails addresses separate on their own phone?

Have two cell phones, different numbers. Each has their own apple id. How can I merge them so apps purchased on one phone show on the other. But.as each has their own email address, I want to keep these email addresses separate on their own phone? Thanks.

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

Help! i have one apple id but 2 game center accounts.......each mini has their own but now they seem to obtain the same game center id......help!

i have one apple id.
i have 2 mini ipads with different game center id's but same apple id...
each ipad has their own email address setup, even though they can see all 3 email address...
why does the game center id no longer keep its own game center id?

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

HT5622 Should my family share one apple id or each have their own?

Should my family share one apple id or each have their own? I want to be in control of the id and password since my kids are 10 and 12.

Personally I would give them their own ID each because you'll end up syncing all of your data onto their phones if you share one.
This way you can set individual passwords for their IDs and therefore have control so that they can't go on an itunes spending spree (if that is a concern).
As soon as you feel they can do as they please with their phones just tell them their passwords or allow them to change it. This way they can do their own thing with minimal fuss.
I hope this helps.

Multipe discussion boards within one site collection, each with their own email?

So we use several list servs and these have become an issue and the data is lost discussion based on you cannot collectively house and search for information and attachments.
I have a few questions that maybe you could help in my research:
1) Is SharePoint discussions capable of having multiple discussion boards in one site collection, each with their own email address to replace the function of a list serv (so at a minimum content can be organized, with attachments available, and replies
can be seen/sent via email.)
2) From an attachment perspective; what is the best way to ensure virus blocking in the above scenario IF the above scenario is able to be done
3) Is there OOTB functionality here or is there a recommended third party product? (I am not looking to build out a custom solution if at all possible to avoid that)
any thoughts or input here would be greatly appreciated!
~Kat

1) - Yes, discussion boards are just specially formatted lists and yes, each discussion board can have their own email address.
2) - Blocked file types can be configured in CA and I believe that SP will strip out any emails with blocked file types attached (not 100% on that, probably 95% sure)
3) All out of the box (assuming SP will block the attachments as I assumed in #2

VPN (PPTP) Authentication Failed

Hi,
I am trying to Connect to my work network. Work uses a Secure Computing SG560.
The setup at work on the SG560 is as follows:
PPTP VPN Server
Authentication Scheme: Weakly Encrypted Authentication (CHAP)
Encryption: Strong Encryption (MPPE 128 Bit)
On my mac, I have setup a new VPN (PPTP) Connection
Given it the Internet Address
My Account Name
Encryption Auto (And tried Maximum)
Authentication Settings is password with my password set on the SG560.
Pressing Connection I get a prompt saying Authentication failed
In my console I have this (obviously some settings omitted)
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] pppd 2.4.2 (Apple version 412.3) started by wt9bind, uid 501
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP connecting to server 'x.x.x.x' (x.x.x.x)...
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP connection established.
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] Connect: ppp0 <--> socket[34:17]
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] MS-CHAP authentication failed:
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] Connection terminated.
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP disconnecting...
6/12/10 06/12/10 - 9:06:48 PM pppd[1825] PPTP disconnected
The only way to get this working is to change the Authentication Scheme in the SG560 to No Auth
If I do this, it connects perfectly with the following:
6/12/10 06/12/10 - 9:09:15 PM kernel utunctlconnect: creating interface utun0
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] pppd 2.4.2 (Apple version 412.3) started by wt9bind, uid 501
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] PPTP connecting to server 'x.x.x.x' (x.x.x.x)...
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] PPTP connection established.
6/12/10 06/12/10 - 9:09:16 PM pppd[1839] Connect: ppp0 <--> socket[34:17]
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] local IP address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] remote IP address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] primary DNS address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] secondary DNS address x.x.x.x
6/12/10 06/12/10 - 9:09:17 PM configd[14] network configuration changed.
6/12/10 06/12/10 - 9:09:17 PM pppd[1839] pptpwaitinput: Address added. previous interface setting (name: en0, address: 192.168.1.9), current interface setting (name: ppp0, family: PPP, address: x.x.x.x, subnet: 255.255.0.0, destination: x.x.x.x).
6/12/10 06/12/10 - 9:09:17 PM configd[14] network configuration changed.
6/12/10 06/12/10 - 9:09:17 PM vmnet-bridge[234] Dynamic store changed
6/12/10 06/12/10 - 9:09:17 PM vmnet-bridge[234] Could not retrieve media for interface ppp0: Operation not supported on socket.
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: VMNetDisconnect called for port 0xf8f9f00
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: Invalidating peer info for hub: 0, port: 0
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: filter detached
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: down
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: bridge-en0: detached
6/12/10 06/12/10 - 9:09:17 PM kernel vmnet: Freeing hub at 0xe45a000.
Now obviously running no auth is totally unacceptable.
The options in the SG560 for Authentication Scheme is:
PAP
CHAP
MS-CHAP
MS-CHAPV2
Required Encryption:
No Encryption
Basic Encryption MPPE 40Bit
Strong Encryption MPPE 128Bit
Can somebody tell me why my client on my mac will not connect as soon as the encryption level is changed on the SG560? It works perfectly from Windows.
Thanks

Can anybody help me on this?

Allow user to edit their own Address Book server entry

Hiya.
I'm looking for a way to let users edit their own information in the Address Book Server/Open directory. I've made sure the main group for users is in the AB Read-Write Groups group in WGM.
I've even checked the box in Server Admin that says "Allow users to edit their own contact information", but after adding the account to an address book client and authenticating as a user (For example, myself), I can't edit my own contact info anywhere that will push to the server.
Is there any way to do this?
Thanks!

You'd need to write a php script or something to interface with applescript…

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

HT4436 we have 5 devices on one itunes account how do I give them each their own icloud account and still share the itunes account?

we have 5 devices on one itunes account how do I give them each their own icloud account and still share the itunes account?

You need a unique AppleID for each iCloud account. So grab some free gmail, hotmail, aol, yahoo or whatever email addresses to make five new AppleIDs. Now, everybody make an iCloud account for themselves, and keep the existing shared AppleID and password just for use in the iTunes and App Stores. You can also each use your own unique AppleIDs to make iMessage accounts and keep those separate as well.

VPN pptp give users their own IP address

Similar Messages

Maybe you are looking for