VPN via Internet Connect

My work place has switched to a new Firewall and of course it's not compatible with my VPN Tracker software that I use at home. Grrrr...stupid PC networks!!
Anyway...without having to go into my Terminal (which scares the crap out of me) and mess with that, I'd love to use the VPN access via the Internet Connection application. Far more user friendly.
I entered all the correct and appropriate info that was given to me by our administrator (server address, ect), but it's giving me an error.
QUESTION: Does something ELSE need to be running on my MAC for the VPN option to be working correctly?
I'm running Tiger on my eMac. I have a cable modem connection via Airport.

I rebooted and all seems to be okay. Both our MACs connected to the internet just fine. So I think I'm okay. No harm. Although I'm too tired and frustrated to be playing with this probably! LOL Frustrated that our so-called administrator at work is so afraid of MACs. But I don't want him coming to my house and screwing up my MAC and Network here!
But when you said I had to open up a Port, wouldn't that require some kind of set up in Network Preferences? It makes sense that I'd need a new portal to connect, but I didn't used to have to before. I had a main portal (IP address) to my office, then I was able to connect to the other servers once that connection was made.
I'm using that main IP address to try and connect via the VPN in Internet Connection, but no luck. I have the Share Secret, and account name and password all set up, so I don't know what i'm doing wrong at this point. Everything used to work great via VPN Tracker, so I'm even more upset he didn't ask me if that software program was compatible with the new FireWire they installed.
Oh, well! I'll keep trying.
Thanks,
H

Similar Messages

  • Cisco vpn and Internet Connect 10.4.6

    Today, after upgrading to 10.4.6 and mindful of the advertised feature that the built-in vpn now works with a Cisco server, I tried to use the l2tp/ipsec configuration to connect to a Cisco 3000 VPN service. Didn't work.
    I sniffed the connection and found that on connection Internet Connect sends an ipsec exchange type of "Identity Protection (Main Mode)". The 3000 does not respond to this request at all, only to Aggressive Mode. I have tried eliminating the "Main mode" exchange type from /etc/racoon/racoon.conf and also /etc/racoon/remote/anonymous.conf which are the only two places I can find a setting for it. Made no difference.
    The plist file for the vpn config does not have any of the lower level ipsec parameter settings so I assume that /etc/racoon... is what is used.
    Is there anywhere else or any other way to change the phase 1 negotiation type from Main to Aggressive?
    Has anyone got the built-in VPN service to talk to a Cisco 3000 Concentrator with the current OS release?
    Thanks
    r.
    12"G4 PB     10.4.6
    12" g4 pb    

    r.l.
    The plist file for the vpn config does not have any
    of the lower level ipsec parameter settings so I
    assume that /etc/racoon... is what is used.
    I found this tip in another post (http://discussions.apple.com/thread.jspa?messageID=1738615) - thanks to Alan Snelgrove! - there is a conf file that is generated during the VPN session (in my case only 30 seconds long until it times out). The name of the file is "IPADDRESS.conf" (where IPADDRESS is the actual address to connect to) and it is located in /etc/racoon/remote. If you look there during the attempt to connect another file besides anonymous.conf will be there.
    I tried to save this file in the /etc/racoon/remote directory, but the next time I tried to connect it overwrote the file and removed it after the attempt timed out.
    I don't know if that helps...
    Powerbook G4 1.5 GHz   Mac OS X (10.4.6)   1.5 GB Ram

  • VPN and Internet Connection Sharing? (bridging remote networks)

    I'd like to try an experiment and some advice from this list will be useful.
    +Summary: Can a Mac with two interfaces activate VPN and Internet sharing simultaneously to bridge two remote networks?+
    I've created a PPTP VPN server on our XServe at work and opened the appropriate ports on our firewall. This and a second location are linked with standard (but fast) ADSL broadband. I can log in from both Mac and Windows VPN clients at an external location and indeed the experience is just like being at work- printers, file servers and other resources (eg networked Filemaker databases) are all visible. Yay.
    Question: Is it possible to extend this concept further by logging onto our VPN with once interface (eg Airport) +and then+ enabling Internet Sharing through the second interface (eg Ethernet)? Will this allow a small network connected through the second interface to all behave as though they are on the work network, with transparent access to fileservers, printers and so on, without each bothering individually with VPNs and so on? I suspect there are physical boxes that will do this, but it would be wonderful to know if I can get a Mac with two NICs to do the same job, acting as a router between the two networks. Are there any limitations to this? I am happy to tweak under the hood if need be. I just need to know if this is possible, even in theory, and what the limitations might be.
    Thanks.

    Hey Nathan...
    My VPN is down at the moment, but I think your going to have to manually configure all of the "clients" who are sharing the VPN to an IP range that your office uses. When you connect to your VPN, check your network prefs, and you'll see the IP addresses assigned to your VPN are similar to your network at the office. So, in a way, your sharing computer has 2 IP addresses... one from your modem or router at home, and one from the VPN server at the office. It's this 2nd IP address that allows you to appear to be on the network at the office.
    So, if you can find a way to set up your shared clients the same way.... it might work. It will also be VERY helpful if your IP range at home is different from the IP range at the office....192.168... for one...and 10.0.0 for the other. (Whether traffic will pass thru your "sharing server" is a different matter altogether.)
    Now, and I'm really guessing here.. if this works at all... you may be only able to access stuff from the office on your "shared clients" (ie no internet).... the way around that is to set up your VPN to allow VPN clients to pull stuff from the internet from the office thu the VPN... and for the life of me don't remember how that is done. But it will most likely be a bit slow.
    I'd start with the basics... setup one client with a manual IP address/router/dns servers, and try to ping a computer at the office. If this works... at least part of your problem is solved.
    With all that said... it may not work at all. Good Luck!

  • Internet Connect password won't turn off?

    Hey there folks,
    This is more of an annoyance/inconvenience than a problem. I would like to turn off the Internet Connect password request dialog box that comes on only when I try to connect via the modem status icon on the menu bar (option available via Internet Connect).
    When I try to connect to the internet with a dial-up connection (please don't ask me why I'm still using dial-up…), I try to connect through the modem status icon and at first it tries to connect, but then up comes an Internet Connect dialog box asking for my (login) password –if I choose Cancel or enter an incorrect password the connection that is being attempted disconnects –however, it does connect if I enter the correct login password. Yet if I choose to connect directly through the Internet Connect application, there is no dialog box asking for a password, and it connects to the internet just fine.
    I should mention that I have just started using the login/password feature, and also have set a Master Password for FileVault (under Security in System Preferences), but FileVault has not been turned on. I have also fidgeted with KeyChain Access, but have not yet aclimatized myself to its surroundings (although hopefully I haven't messed anything up). I have only just had this problem since fooling around with these password/security features.
    Also, I have read the Apple Discussion Board discussions about accessing Accounts in System Preferences and turning on "Automatically login as:" (under Login Options) and also about changing the password to an empty field (no characters), also under Accounts. I have tried these options to no avail (also having closed/quit the System Preferences panel and having restarted the computer). I have tried these with administrator settings on for the main user (I also have a guest user setting with some restrictions and no administrator settings –but I can connect via the modem status icon when logged in as the guest user without the Internet Connect password dialog box coming up –?)
    Personally, this seems to me to be a software glitch due to the fact that connecting via the Internet Connect application does not require a password, but connecting via the modem status icon on the menu bar does. (Also, I previously updated my Tiger OS to 10.4.2 from 10.4.1, but noticed that I got a lot of password dialog boxes upon trying to do the littlest things, that I reinstalled the original Tiger OS and then only updated to 10.4.1 –but these OS update shennanigans happened some time ago –so I digress…)
    If anyone has any ideas on how to turn off this Internet Connect password dialog box (preferably other than reinstalling the system software), I would appreciate it.
    Stats:
    G4, MacOSX Tiger 10.4.1, Internet Connect v1.4

    Have you been repairing Permissions before & after every install/update & rebooting?
    I'm thinking that the difference is where the parameters are stored, I think the Icon ones are linked to the Network CP, might drag these files to the Desktop & reboot...
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    You can always move them back & reboot again if it doesn;t work.

  • Can't access non-VPN resources when connected to VPN

    I need to access web based resources over a VPN for work. My admin gave me the connection parameters, and I can connect to the VPN and access what I need, no problem. But when connected to VPN, I can't access websites, Subversion repositories, Skype, etc. that are not on the VPN.
    On Windows, there's a connection property on VPN connections called "Use default gateway". With that option cleared on my Windows machine, I can access both VPN and non-VPN resources simultaneously. I can't spot anything equivalent in the VPN connection in Network Preferences.
    So I guess the question is: what network settings on Mac (Snow Leopard) will enable me to access both VPN and normal resources simultaneously?

    I have found a workaround. It isn't optimal, and it's disappointing that VPN is so poorly supported on Mac. Though the specific IPs are probably applicable only to the particular VPN I connect to, maybe the general idea can be of help to others and your network admins can supply the particular IPs you need.
    1. My Admin had me open Network Preferences, select the VPN connection, click the Tools icon at the bottom, and select Set Service Order. In that dialog, move the VPN connection to the bottom of the list (my EVDO modem that gets me my internet connection is fist in the list). Apply this change.
    2. Next, my admin asked me to run the following in Terminal, once when VPN was not connected (but internet was connected), and again with VPN connected, and send him the output:
    *netstat -nr*
    3. After looking at the terminal output, admin told me to run the following in Terminal with the VPN connected:
    *sudo route add -net 10.123 -netmask 255.255.0.0 10.123.50.1*
    After disconnecting both VPN and Internet connection and reactivating each in turn (internet, then VPN), I was able to access both VPN and non-VPN resources simultaneously.
    The bad news is that every time I need to connect I have to run route add in Terminal and enter my password. I will probably make a shell script to at least run the command so I don't have to remember it.
    Here's hoping this helps if others bump into this pernicious little problem.

  • Macs don't recognize internet connection

    I live in a remote area and still have a dial-up connection that has been working for a few years. Now suddenly, out of the blue, neither of the two Macs I have (a PBook G4 and an 800 MHz iMac) recognize the internet connection. I can secure a connection via Internet Connect which authenticates the connection and then starts clocking my time connected, but neither Safari, Internet Explorer 5.2, nor Apple Mail seem to recognize the connection. They act as though there's no internet at all. I even spoke with my ISPs tech support and they had me try to ping their router, but even though they could "see" I was connected to their network, the ping resulted in 100% packet loss. Any ideas as to what is wrong? This happens whether or not I try it with a direct modem phone line or via our Airport network with the base station hooked to the phone line.

    Yes, the phone line seems to be fine and both Macs even acknowledge a working connection and modem handshake when I monitor that part via Internet Connect. It's just that none of the software that's suppose to make use of that connection seems to be able to do so (e.g., Safari, IE 5.2, Apple Mail, etc.). I was thinking that something hidden way in the depths of System Preferences that I haven't been aware of has been forcing all software to look for the wrong port out (to the internet). But I've tried disabling (unchecking) all the other options in the Port Configurations window besides "modem" and this still doesn't work....

  • How to avoid internet connection unless it is via VPN?

    Hi,
    i have some iPhone4 and iPad on my business.
    I've configured a VPN connection (IPSec, via iPCU profile).
    That I need is to avoid internet connections if it are not via the VPN, for security policies reason.
    Is there any way to block Wifi and 3G connections if VPN is not running?
    Thanks in advance

    Unfortunately, Wi-FI is either Off or On. There is no way to automatically select preferred networks.
    The only thing you can do is turn Settings-->WiFi-->Ask To Join Networks = ON. This will force you to confirm any network connection manually before it is made.
    Hope this helps.
    -Peter

  • Connect Oracle e-Businss suite 11i or r12 via internet

    Hello,
    I have question regarding accessing Oracle e-Business suite (11i or r12) via internet from remote location.
    We currently have e-business suite accessed by VPN connection from remote location.
    I would like to know if possible to configure Oracle e-business suite that user can access them via internet.
    Just as end users can access web based time card such as ADP site, where everything is located on ADP server and
    subscribing company employees access them via internet.
    thank you in advance.

    Paul,
    Please see "USE EXTERNAL WEBTIER IF EXPOSING ANY PART OF EBS TO THE INTERNET" section in:
    Secure Configuration Guide for Oracle E-Business Suite Release 12 (Doc ID 403537.1)
    Secure Configuration Guide for Oracle E-Business Suite 11i (Doc ID 189367.1)
    Thanks,
    Hussein

  • How can I connect to a VPN via PPTP?

    Hello,
    I am a foreigner living in Taiyuan, the capital city of Shanxi Province, in China. I bought my macbook the summer of 2006. It still works perfectly except I cannot connect to the internet here at the university.
    The internet here is split into two parts: local, and international. The ethernet connection allows me to access Chinese websites, but nothing else. It sounds counterintuitive but really, that's how it is. In order to get the rest of the world, all computers have to connect to a VPN via PPTP. Once this is established, viola, you have internet.
    My problem is I cannot seem to connect to the VPN. I have used Internet Connect, I have created a VPN via PPTP, and put in all the right numbers...
    the VPN IP is 202.207.128.115
    the username is tyut
    the password is tyut
    But when I try to connect, it just says it can't. Nobody at the university has been helpful because they've never used a Mac before, and besides which, they aren't used to using a computer in English.
    Can anyone help me? Or does anyone know how to get in touch with Apple Services in China (in English)?

    Yeah, but that's not the problem here. I'm an English teacher at Taiyuan University of Technology (the irony does not escape me). The other teachers have PCs and can get full internet in their apartment. Since I have a mac, it's much harder for the school technicians to help me.
    This is what my log says from the VPN connection (which does connect now.)
    Mon Oct 29 16:05:52 2007 : PPTP connecting to server '202.207.128.115' (202.207.128.115)...
    Mon Oct 29 16:05:52 2007 : PPTP connection established.
    Mon Oct 29 16:05:52 2007 : Using interface ppp0
    Mon Oct 29 16:05:52 2007 : Connect: ppp0 <--> socket[34:17]
    Mon Oct 29 16:05:52 2007 : local IP address 172.30.1.252
    Mon Oct 29 16:05:52 2007 : remote IP address 172.30.1.2
    But I still can't load any pages from the VPN connection, just the regular ethernet connection (local internet). It doesn't work if I use IP addresses instead. :-/ I unselected "send all traffic over the VPN connection" because if it's selected, I don't even get local internet.
    Looking online I found a possible fix, but it's for Windows XP. I don't know how to find the same settings on the Mac...For Windows XP:
    1. Click Start -> Control Panel
    2. Click on the Network and Internet Connections icon and then click "Network Connections". If your Control Panel is in classic view, simply double click the "Network Connections" icon.
    3. Right click on the new VPN connection and select Properties
    4. Select the "Networking" tab
    5. Verify that Internet Protocol (TCP/IP) is highlighted
    6. Click on the Properties button
    7. Within the Internet Protocol (TCP/IP) properties window, click on the "Advanced..." button. Within the Advanced TCP/IP Settings window, REMOVE the check mark next to "Use default gateway on remote network"
    8. Click "OK" to close all open windows
    Where would the "default gateway on remote network" be on a Mac?

  • Central Site Internet Connectivity for MPLS VPN User

    What are the solutions of Central site Internet connectivity for a MPLS VPN user, and what is the best practice?

    Hello,
    Since you mentioned that Internet Access should be through a central site, it is clear that all customer sites (except the central) will somehow have a default (static/dynamic) to reach the central site via the normal VPN path for unknown destinations. Any firewall that might be needed, would be placed at the central site (at least). So, the issue is how the central site accesses the Internet.
    Various methods exist to provide Internet Access to an MPLS VPN. I am not sure if any one of them is considered the best. Each method has its pros and cons, and since you have to balance various factors, those factors might conflict at some point. It is hard to get simplicity, optimal routing, maximum degree of security (no matter how you define "security"), reduced memory demands and cover any other special requirements (such as possibility for overlapping between customer addresses) from a single solution. Probably the most secure VPN is the one which is not open to the Internet. If you open it to the Internet, some holes also open inevitably.
    One method is to create a separate Internet_Access VPN and have other VPNs create an extranet with that Internet_Access VPN. This method is said to be very secure (at least in terms of backbone exposure). However, if full routing is a requirement, the increased memory demands of this solution might lead you to prefer to keep the internet routing table in the Global Routing Table (GRT). You might have full routing in the GRT of PEs and Ps or in PEs only (second is probably better).
    Some names for solutions that exist are: static default routing, dynamic default routing, separate BGP session between PE and CE (via separate interface, subinterface or tunnel), extranet with internet VRF (mentioned earlier), extranet with internet VRF + VRF-aware NAT.
    The choice will depend on the requirements of your environment. I cannot possibly describe all methods here and I do not know of a public document that does. If you need an analysis of MPLS VPN security, you may want to take a look at Michael Behringer's great book with M.Morrow "MPLS VPN Security". Another book that describes solutions is "MPLS and VPN Architectures" by Ivan Pepelnjak. There is a Networkers session on MPLS VPNs that lists solutions. There is also a relevant document in CCO:
    http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a00801445fb.shtml (covering static default routing option).
    Kind Regards,
    M.

  • Internet connection via Airport Extreme/router thats not working, why?

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

    I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
    I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
    However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
    1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
    2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
    3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
    4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
    So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
    Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
    Thanks
    u2dougal

  • Intermittent Internet Connection and VPN clients can't ping internal LAN but connected after installating cisco ASA5512x

    Hi!
    I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
    ISP ->  Firewall -> Core switch -> Internal LAN
    after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
    here's my configuration from my firewall.
    ASA Version 8.6(1)2
    hostname ciscofirewall
    enable password 2KFQnbNIdI.2KYOU encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface GigabitEthernet0/0
    nameif outside
    security-level 0
    ip address 203.x.x.x 255.255.255.0
    interface GigabitEthernet0/1
    nameif inside
    security-level 100
    ip address 10.152.11.15 255.255.255.0
    interface GigabitEthernet0/2
    shutdown
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet0/3
    shutdown
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet0/4
    shutdown
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet0/5
    shutdown
    no nameif
    no security-level
    no ip address
    interface Management0/0
    nameif management
    security-level 100
    ip address 192.168.1.1 255.255.255.0
    management-only
    ftp mode passive
    dns domain-lookup outside
    dns domain-lookup inside
    dns server-group DefaultDNS
    name-server 4.2.2.2 -------> public DNS
    name-server 8.8.8.8 -------> public
    name-server 203.x.x.x   ----> Clients DNS
    name-server 203.x.x.x  -----> Clients DNS
    same-security-traffic permit intra-interface
    object network net_access
    subnet 10.0.0.0 255.0.0.0
    object network citrix_server
    host 10.152.11.21
    object network NETWORK_OBJ_10.10.10.0_28
    subnet 10.10.10.0 255.255.255.240
    object network NETWORK_OBJ_10.0.0.0_8
    subnet 10.0.0.0 255.0.0.0
    object network InterconHotel
    subnet 10.152.11.0 255.255.255.0
    access-list net_surf extended permit ip any any
    access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
    access-list outside_access extended permit tcp any object citrix_server eq www
    access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
    access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
    access-list LAN_Users remark LAN_clients
    access-list LAN_Users standard permit any
    access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
    pager lines 24
    logging enable
    logging asdm informational
    mtu management 1500
    mtu outside 1500
    mtu inside 1500
    ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
    object network net_access
    nat (inside,outside) dynamic interface
    object network citrix_server
    nat (inside,outside) static 203.177.18.234 service tcp www www
    object network NETWORK_OBJ_10.10.10.0_28
    nat (any,outside) dynamic interface
    object network InterconHotel
    nat (inside,outside) dynamic interface dns
    access-group outside_access in interface outside
    access-group net_surf out interface outside
    route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
    route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication telnet console LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 management
    http 10.0.0.100 255.255.255.255 inside
    http 10.10.10.0 255.255.255.240 outside
    http 0.0.0.0 0.0.0.0 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map inside_map interface inside
    crypto ikev1 enable outside
    crypto ikev1 enable inside
    crypto ikev1 policy 10
    authentication crack
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 20
    authentication rsa-sig
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 30
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 40
    authentication crack
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 50
    authentication rsa-sig
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 60
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 70
    authentication crack
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 80
    authentication rsa-sig
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 90
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 100
    authentication crack
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 110
    authentication rsa-sig
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 120
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 130
    authentication crack
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 140
    authentication rsa-sig
    encryption des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 150
    authentication pre-share
    encryption des
    hash sha
    group 2
    lifetime 86400
    client-update enable
    telnet 10.152.11.0 255.255.255.0 inside
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd address 192.168.1.2-192.168.1.254 management
    dhcpd enable management
    threat-detection basic-threat
    threat-detection statistics
    threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
    webvpn
    enable outside
    anyconnect-essentials
    group-policy outsidevpn internal
    group-policy outsidevpn attributes
    dns-server value 203.x.x.x 203.x.x.x
    vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
    split-tunnel-policy tunnelall
    split-tunnel-network-list value outsidevpn_splitTunnelAcl
    default-domain value interconti.com
    address-pools value vpnpool
    username test1 password i1lji/GiOWB67bAs encrypted privilege 5
    username test1 attributes
    vpn-group-policy outsidevpn
    username mnlha password WlzjmENGEEZmT9LA encrypted
    username mnlha attributes
    vpn-group-policy outsidevpn
    username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
    tunnel-group outsidevpn type remote-access
    tunnel-group outsidevpn general-attributes
    address-pool (inside) vpnpool
    address-pool vpnpool
    authentication-server-group (outside) LOCAL
    default-group-policy outsidevpn
    tunnel-group outsidevpn ipsec-attributes
    ikev1 pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
      inspect ip-options
      inspect icmp
      inspect http
      inspect ipsec-pass-thru
    class class-default
      user-statistics accounting
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    hpm topN enable
    Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
    : end
    thanks. please help.

    I think you should change your nat-exemption rule to smth more general, like
    nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28  NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
    'cause your inside networks are not the same as your vpn-pool subnet.
    Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA.

  • Problem connecting my macbook pro to a wired internet connection via ethernet cable adapter

    I am having a problem connecting my macbook to a wired internet connection in an area in my workplace where there is no wifi.  The macbook works fine on the same internet connection via wifi in other parts but when I add it as a wired connection it doesn't show any connection.  I have turned off wifi to make sure that it is not trying to pick up a poor connection but I still can't get this to work.  I think I am trying to set up the connection properly but can't be completely sure.  Any help would be appreciated.

    Open System Preferences>Network and make sure Ethernet is selected. If it is, open Advanced Settings (at the bottom of the Network window). Click on the TCP/IP tab. Configure IPv4 should be set to "Using  DHCP".
    Configure IPv6 should be set to "Automatically". When those are set click the "Renew DHCP Lease" button

  • When I connect my headphones via bluetooth to my iPad 4 I lose my internet connection?

    I recently upgraded to iOS 7.1 and along with the problem mentioned in the title there are many other, not so major problems but I can put up with them.
    So basically before I updated I could do this fine with no problems but ever since it updated my Turtle Beach PX5 has been able to connect to my iPad via Bluetooth but as soon as the connection is established I lose internet connection which is extremely frustrating as I tend to FaceTime while I'm playing on a console.
    If I go into the wifi settings no possible access points are shown unless I turn off my bluetooth. Although on one occasion I have been able to connect to both services but the bluetooth was very unstable and after 20 or so seconds it seemed to have disconnected itself.
    It's extremely frustrating that I pay money for a quality product (might I add that I've very much enjoyed up to this point) expecting that both these services can run simultaneously when they cannot.
    So I wondered if there is a solution to this? Has anyone else had similar problems? And is there any way I can downgrade as the newest update (for me at least) has been a major disappointment.

    One thing you should definitely try is keeping your iPhone 4 connected via USB cable in your computer and restarting.  This should make the computer recognize that it is connected and as long as you have your iTunes set up to automatically open upon connection with your iPhone you should be all set!

  • When I connect imac to network via airport all devices on the network lose internet connectivity

    Every device stays connected to the network but the internet stops working. Usually the network will continue to function normally for about five minutes when the imac connects, but then every device loses internet access via the network, NOT just the imac. As soon as I turn off the imac's airport they get internet connectivity back. A wired network connection to the imac seems to work OK.
    The airport is configured as "Using DHCP"
    Mac OS X 10.6.8
    As far as I know, no changes have been made to the computer recently (but it is not my machine and the owner isn't here atm)
    I found one other resource with the same problem here:
    http://www.mac-forums.com/forums/internet-networking-wireless/183185-turning-my- macbook-airport-breaks-internet-connection-entire-network.html
    but the solution didn't work. When I deleted the three files mentioned in the solution in that thread, my problem is not solved.
    If you have any ideas or need more information I would love to hear from you.
    Thanks guys.

    Yes it is possible that the two machines are creating a Computer-to-Computer network and are not going through the Express.
    To delete the Alias you may need to login with the Admin User.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.5)   Updated - Get Started with iWeb (WillG4PB.com)

Maybe you are looking for