VPRS Value should be Zero in SO

Hi Guys
how can i get a value zero for VPRS in sales order, is there any settings that i need to make ?
thanks

Hi Ashwath,
Could you please tell us the reason for puting the Zero value for VPRS.
You can copy the same from material master.For that just tick "determine cost" in your item category configuration and also in your pricing procedure put the routine as 4 in front of VPRS.
VPRS is generally a statistical condition and is not generally used in the calculation of pricing procedure.
If you will put your price as zero in the material master then this will affect the valuation of material.So i guess you shouldn't put this as zero.
Regards
Karan

Similar Messages

PO value should be zero

Hello Gurus
How can we make the price of the PO as zero i need to see that as there is no charge to the PO
Regards
Madhuri

hi Madhuri
In PO line item tick Free Good check box..which in turn will untick invoice receipt check box.
Now this po will be valuated at '0'
For which u can pass GR
Vishal...

Sale Order Excise Value should not be zero

Dear Friends
With the User Exit MV45AFZZ Form:: Userexit_Save_Document_Prepare,
we have written a condition that while saving the sale order, if the excise condition value JEX2 is zero, order could not be saved and this is working fine for normal process.
But in some cases, we need to explode the BOM in sale order. In this case, the above user exit is checking for components excise value which should not be the case. In fact, we tried to distinguish with item category for the above exit but the item category structures are not flowing in a particular area of user exit.
My requirement is that for BOM exploded items, the above condition should not trigger for excise value in sale order. It should trigger ONLY for Header Material. How this should be achieved??
thanks
G. Lakshmipathi

The problem is solved.
Actually in the above user exit, we had looped thru' xvbap for the item category type NOT equal to 'Order Type'.
Then, we read the xkomv table with two keys JEX2 and POSNV ( referring to vbap-posnr) and checked if condition value is null, if so trigger the error message.
In this way, though the xvbap is not dynamic in that form of userexit, the reading of xkomv helped to achieve
our purpose of triggering the error for header materials.
thanks
G. Lakshmipathi

Free sample sales net value in invoice should give zero value.

Hello Experts,
I have a question on the cess values aspect of free sample sales.Recently, I have configured a free sample sales for one of our clients. Now, in the invoice the user does not want the cess values to be passed to the customer.I changed the R100 discount type in the pricing control data, still tax is picked up, showing negative net value and not zero. Now, how to arrive at excise payable as credit entry and octoroi etc as debit entry in G/L accounts. or where I am going wrong, please suggest.
Regards,
Raj.

For sample sales that is you are despatching material on free of cost, follow the steps mentioned below
1) In V/06, you should create a condition type, say ZDIS (for 100% discount) and maintain the following:-
Cond. class::::::A
Calculat.type::::A
Plus/minus:::::::X
Item condition:::X
Amount/percent:::X
Delete:::::::::::X
Value::::::::::::X
Save the condition type
2) In OV34, create two new Account Keys, one for PR00 and one for 100% discount. Say the two Account Keys are ZSM and ZSP
3) In V/08, against PR00 condition type, assign Account Key ZSM with a tick in "Required". Next for condition type ZDIS, assign the another Account Key ZSP without any tick in the three boxes. Against this discount condition type, assign the step number of net value under the tab "From", assuming that after PR00 you have multiple condition types.
4) In FS00, create a new G/L Account with description as Sales Promotion Expenses
5) In VKOA maintain these two Account Keys for the sales organisation / chart of accounts with the same G/L account for both the Account Keys. Dont assign different G/L Account here.
6) Now create a sale order and do billing. See how the accounting document flows. Post still if you have any issues.
thanks
G. Lakshmipathi

Value should start with zero

Hi experts
I have a target field whose values should generate starting from zero
I am using gen_row_num but it starts from 1
Any Suggestions Please
Thanks
Madhu

Hello
So, you need the value to be one less than the one that is generated? Simple maths suggests subtracting 1 from the generated value will give you what you require.
gen_row_num() - 1
Michael

IMAQ Vision: (Hex 0xBFF60488) Minimum coverage value should be greater than zero.

Having some trouble with extended acquisition of a Mightex USB camera using LabVIEW 8.5. LabVIEW is able to acquire images from this camera using IMAQ USB, a snap every ~30 seconds. After about 1100 snaps LabVIEW errors out: IMAQ Vision: (Hex 0xBFF60488) Minimum coverage value should be greater than zero.
Any help would be greatly appreciated!

Check this discussion

Main Item net value showing as zero by condition type R100.

Hi Experts,
I am configured free goods, maintained condition record for exclusive free goods.
but in sales order free goods item is not populating and when i see the analysis the requirement 55 not met.
I removed the requirement 55 and i saved it.
Still in the sales order the free goods exclusive item not populating.
and i find that main Item net value showing as zero by condition type R100.
Why system showing the main item amount as zero by condition type R100?
Thanks in advance.

HI ram reddy
you have to maintain R100 requirement -55 it should be there
also Alternative Condition Base value - 28(100% discount)
check your main pricing procedure having conditon type R100 or not if it is not there then maintain
conditon record in VBN1 for NA00 check all the setting(calculation rule)
activate free goods pricing correctly(NA0001)
save it now try
Regards,
Krishna.
Edited by: kris_hna on Jul 14, 2011 11:13 AM
Edited by: kris_hna on Jul 14, 2011 11:31 AM

Rebate : Scale base value is showing zero

Dear Friends,
While configuring Rebate Processing I am getting following problem :
Description: We are Maintaining Condition record on basis of Product Hierarchy for Rebate agreements.
Problem : When we want to view Rebate Payments -> Verification level, the Quantity under Scale Base Value is showing zero but appropriate accruals is coming.
My end user wants apart from Cond.base value & Accruals the Scale Base Value (which shows Quantity) should also come so that he can have a idea on what value and quantity the rebate is been given.
Note: For each Product hierarchy we are maintaining one of the SKU relevant for Product hierarchy in material for settlement field.
Expecting a good answer from u all sap gurus.....
Thanks in advance.
Regards...
Tushar

Hii There
This kind of problem was existing in my system too.
I raised this with SAP people and they told me to apply SAP note no.# 970384 after which the scale base quantity was appearing.
You could try this out.
Thanks & Regards
Gaurav Manocha

Redo log space requests should be zero?

do logbuffer should be request s should be zero
as my environment showing below as output
let me know do i need to log switch manually
SQL> select name,value
2 from v$sysstat
3 where name='redo log space requests';
NAME VALUE
redo log space requests 14130

Hi Can you please post the output of this as well
=====================
SET PAGESIZE 90
SET LINESIZE 150
set heading on
column "00:00" format 9999
column "01:00" format 9999
column "02:00" format 9999
column "03:00" format 9999
column "04:00" format 9999
column "05:00" format 9999
column "06:00" format 9999
column "07:00" format 9999
column "08:00" format 9999
column "09:00" format 9999
column "10:00" format 9999
column "11:00" format 9999
column "12:00" format 9999
column "13:00" format 9999
column "14:00" format 9999
column "15:00" format 9999
column "16:00" format 9999
column "17:00" format 9999
column "18:00" format 9999
column "19:00" format 9999
column "20:00" format 9999
column "21:00" format 9999
column "22:00" format 9999
column "23:00" format 9999
SELECT * FROM (
SELECT * FROM (
SELECT TO_CHAR(FIRST_TIME, 'DD/MM') AS "DAY"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '00', 1, 0), '99')) "00:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '01', 1, 0), '99')) "01:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '02', 1, 0), '99')) "02:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '03', 1, 0), '99')) "03:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '04', 1, 0), '99')) "04:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '05', 1, 0), '99')) "05:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '06', 1, 0), '99')) "06:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '07', 1, 0), '99')) "07:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '08', 1, 0), '99')) "08:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '09', 1, 0), '99')) "09:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '10', 1, 0), '99')) "10:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '11', 1, 0), '99')) "11:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '12', 1, 0), '99')) "12:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '13', 1, 0), '99')) "13:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '14', 1, 0), '99')) "14:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '15', 1, 0), '99')) "15:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '16', 1, 0), '99')) "16:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '17', 1, 0), '99')) "17:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '18', 1, 0), '99')) "18:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '19', 1, 0), '99')) "19:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '20', 1, 0), '99')) "20:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '21', 1, 0), '99')) "21:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '22', 1, 0), '99')) "22:00"
, SUM(TO_NUMBER(DECODE(TO_CHAR(FIRST_TIME, 'HH24'), '23', 1, 0), '99')) "23:00"
FROM V$LOG_HISTORY
WHERE extract(year FROM FIRST_TIME) = extract(year FROM sysdate)
GROUP BY TO_CHAR(FIRST_TIME, 'DD/MM')
) ORDER BY TO_DATE(extract(year FROM sysdate) || DAY, 'YYYY DD/MM') DESC
) WHERE ROWNUM <8;
==========================
select GROUP#,members,bytes/1024/1024 from v$log;
Cheers..
Sameer Ameen

How to add round image inside the table column? with different background color, column value should appear in the middle of the round portion.

Hi
This question is related to table component implementation.
I want to display the column values inside the small round image with different colors and value should appear in the middle.

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Condition VPRS value in operating concern currency.

Hi,
We've encountered the following problem. I was wondering if anyone of you had a similar one and how did you go about it:
1. We've defined second local currency for our company codes = currency type 30 = USD
2. CO-PA stores both company code currency = currency type 10 and op. concern currency B0=USD
3. When we post goods issue to a customer, COGS is posted in FI in both currencies 10 and 30.
4. Then when we run billing COGS condition VPRS is transfered to CO-PA in company code currency and operating concern currency. The value in company code currency is equal to the value during goods issue posting, however the value in operating concern currency (B0=USD) is calculated using the current exchange rate type 'M'. As a result VPRS value in CO-PA in B0=USD is not the same as the value of COGS in FI for currency type 30=USD (as the exchange rate is different during billing).
It makes it impossible to reconcile COGS between FI and CO-PA in USD.
For direct posting to CO-PA from MM and FI, SAP provides notes 604936 and 1066394 which solve the issue if B0=30. However those notes do not provide solution for billing documents and VPRS.
We were advised that this problem can be solved using CO-PA enhacement COPA0005.
Have you ever done it? Any tips on codeing this user exit? Any sample code?
Regards,
SZ

Hi,
Currency options in operating concern enables you to view the data in copa. Activation or deactivation of the additional currencies here wont impact base data from any documents.
If u r business doesnt have the profit center valuation or group valuation u can deactivate other currencies.
Regards
Sudhakar Reddy

Excise Value and Freight value should be add to material cost in the depot

Hi,
Can any one help me on my scenario?
We have depot concept my client requirement is excise Value and Freight value should be add to material cost (inventories at depot) in the depot
Thanks & Regards
KMR

Hi All,
In Depot Sale. This are the Excise Duty Passed on to the Customer BED, AED ECS, SHECS, Other then that its added to the material cost. Define a Pricing procedure for value added to the material cost in both Procurement & Sales base your problem will be solved.
Regards,
Pherasath

Mapping of source message to IDOC.. What values should be assigned?

Hi guys, again
I have SOAP->XI->IDoc scenario, but my IDocs arrive only with 1 segment... The IDoc is not standard, and has a lot of fields, but I want to fill only a few of them in some segments. Lets say, that I have 4 segments, with occurence 0..999999, each value has occurence 0..1 like following..
seg1-val1
 -val2
 -val3
seg2-val1
 -val2
 -val3
seg3-val1
 -val2
 -val3
seg4-val1
 -val2
 -val3
and I have source message like
<seg1>
<val1>..</val1
</seg1>
<seg1>
<val1>..</val1>
</seg1>
I think, I have to map seg1 tag to seg1 segment, and val1 tag to val1 field..
But! DO I HAVE TO MAP also seg1 tag to seg2, seg and seg4 segment? (to create logical "table"), or it is not necessary...
Next question: what value should be assignet to @SEGMENT attribute of segments? also (IDOC segment?) Should it be some constant?
Thank you guys!

All you need to map is seg1 source to seg1 target and val1 source to val1 target . But remember that, if your source has seg2,seg3,seg4 and you want to use them then map them accordingly otherwise no need to map.
@SEGMENT is counter for the number segments you are passing for each type of record. Use a java function to populate or just populate a constant 1.
regards
Shravan

DTW error 10000100 Document total value must be zero or greater than zero

I am trying to import AR service invoices and I am getting an error.
I am using the Document and Document line files and I have tried several different ways but still get the same error.
On the main document file I have
DocNum,DocType,DocDate,DocDueDate,CardCode,NumAtCard,TaxDate,Doctotal
123 S (tried the ddocuemnt_Service) 20111130 20111130 1111 TEST 20111130 1.00
Document lines
ParentKey,LineNum,ItemDescription,TaxCode,FormatCode,Location,LineTotal
123 (blank) decription EX 418000 1 1.00
Now I have tried removing the total columns on 1 file, then alternating it...leaving it on both.
What am I missing here?
Thanks

Hi,
You may check this first: DTW Error when Importing A/R Quotation - document total value must be zero
Thanks,
Gordon

What value should be passed to the ColumnSize parameter for SQLBindParameter() for a nvarchar(n) column?

I have a table with a field "f1" which type is nvarchar(1000). Now I want to update a record through binding variable method. Before I bind the parameter, I call SQLDescribeCol to get the length of f1 - 1000.
The data for updating f1 is prepared and is coverted to UTF16, so the buffer length is 2*(character length). When I call SQLBindParameter() to bind the variable for f1, what length value should be passed to ColumnSize parameter? Some said the Columnsize
should be in byte. In MSDN, I can't find any posts or examples for my cases. MSDN also mentioned that the limit for this argument is 4000.
I try 1000 and 2000, both works. Which one is the exactly correct one? I use SQL Server 2008 and native client 10.0.
Thanks in advance.
Liu Peng

Hello,
Thank you for your question. I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Elvis Long
TechNet Community Support

VPRS Value should be Zero in SO

Similar Messages

Maybe you are looking for