DTW error 10000100 Document total value must be zero or greater than zero
I am trying to import AR service invoices and I am getting an error.
I am using the Document and Document line files and I have tried several different ways but still get the same error.
On the main document file I have
DocNum,DocType,DocDate,DocDueDate,CardCode,NumAtCard,TaxDate,Doctotal
123 S (tried the ddocuemnt_Service) 20111130 20111130 1111 TEST 20111130 1.00
Document lines
ParentKey,LineNum,ItemDescription,TaxCode,FormatCode,Location,LineTotal
123 (blank) decription EX 418000 1 1.00
Now I have tried removing the total columns on 1 file, then alternating it...leaving it on both.
What am I missing here?
Thanks
Hi,
You may check this first: DTW Error when Importing A/R Quotation - document total value must be zero
Thanks,
Gordon
Similar Messages
-
DTW Error when Importing A/R Quotation - document total value must be zero
Hey all,
I am facing the error document total value must be zero or greater than zero when trying to import the Sales Quotation in Item type.
This is my sample source file:
1. Document
DocNum DocType DocDate CardCode DocCurrency DocRate Series
DocNum DocType DocDate CardCode DocCur DocRate Series
1 dDocument_Items 20111015 C0003 MYR 1 11
1 dDocument_Items 20111015 C0003 MYR 1 11
1 dDocument_Items 20111015 C0003 MYR 1 11
1 dDocument_Items 20111015 C0003 MYR 1 11
1 dDocument_Items 20111015 C0003 MYR 1 11
1 dDocument_Items 20111015 C0003 MYR 1 11
2. Document Line
ParentKey LineNum ItemCode ItemDescription Quantity Price
DocNum LineNum ItemCode Dscription Quantity Price
1 0 A0001 from legacy Record 1 24.00
1 1 A0002 from legacy Record 1 12.00
1 2 A0003 from legacy Record 1 2.50
1 3 A0004 from legacy Record 1 9.90
1 4 A0005 from legacy Record 1 2.00
1 5 A0006 from legacy Record 1 1.50
Kindly look for your advises.
Thank you.
Regards,
Wai LengHi Wai Leng Tan,
Enter Data as per following details
Document Header level
DocNum DocType DocDate CardCode DocCurrency DocRate DocTotal Series
DocNum DocType DocDate CardCode DocCur DocRate DocTotal Series
248 dDocument_Items 20111221 C42000 INR 1 100 11
Document Line level
ParentKey LineNum ItemCode ItemDescription Quantity Price
DocNum LineNum ItemCode Dscription Quantity Price
248 0 I00007 HP Printer 95 Inkjet Cartridge 1 100
Not Enter Document Total ZERO
Thanks,
Srujal Patel -
Jwsc Ant task generates [ERROR] - A document style operation must not have
If the wsdlc Ant task is run on a WSDL file to generate the JWSC file and subsequently the jwsc task is run an error gets generated:
[ERROR] - A document style operation must not have a non header INOUT or OUT Parameter.If the wsdlc Ant task is run on a WSDL file to generate the JWSC file and subsequently the jwsc task is run an error gets generated:
[ERROR] - A document style operation must not have a non header INOUT or OUT Parameter. -
Export error: value of length column (38) greater than VARDATA column (36)
Hello @,
I am performing an export on HP-UX/Oracle of a R/3 Enterprise 1.10 system.
I already use got the latest R3load binary. For pool table KAPOL I get
this strange error and I couldn't find any further information about it:
cat SAPPOOL.log
(EXP) TABLE: "DEBI"
(EXP) TABLE: "DVPOOL"
(EXP) TABLE: "DVPOOLTEXT"
(EXP) TABLE: "FINPL"
(EXP) TABLE: "GLTP"
(EXP) TABLE: "KALK"
value of length column (38) greater than VARDATA column (36)
(CNVPOOL) conversion failed for row 356 of table A004 VARKEY = 001V ZSP0003010TI060067A.01 00000000
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/AVT/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/AVT/SYS/exe/run/R3load: END OF LOG: 20110117114148
SQL> desc kapol
Name Null? Type
TABNAME NOT NULL VARCHAR2(30)
VARKEY NOT NULL VARCHAR2(195)
DATALN NOT NULL NUMBER(5)
VARDATA RAW(36)
SQL> select length(vardata),count(*) from kapol group by length(vardata);
LENGTH(VARDATA) COUNT(*)
72 183681
select dataln,count(*) from kapol group by dataln;
DATALN COUNT(*)
-32730 2
36 183679
Does this mean that one row in KAPOL has to be changed from within SAP?
Or could it be an error/bug within R3load?
Regards,
Mark
Edited by: Mark Foerster on Jan 17, 2011 12:46 PMMaybe this information is of any help:
I opened a support call and was told by SAP support to change the
two entries from -32730 to -32732. Don't ask me why... -
How do I make a text box solid if the value in the field is greater than 0 and do this for all recor
Hello,
I have several text boxes on a document, and wish to make the boxes either solid or visible if the value in the field is greater than 0.
I am using an excel file for the data, each cell with either 1 or 0 (true or false).
Any help would be appreciated.
Thanks,
BJYes, I also sent an email regarding this problem.
I am using XNET to write a custom device for PXI-8516 LIN card.
I've attached a couple snippets showing where I've tracked the problem.
The only error that I've seen comes from the XNET Wait vi in the timeout snippet. I believe that error occurs because frame queued in the write snippet is never transmitted by the LIN card.
Attachments:
Timeout_Error_Snippet.png 22 KB
XNET_Write_Snippet.png 24 KB -
Having some trouble with extended acquisition of a Mightex USB camera using LabVIEW 8.5. LabVIEW is able to acquire images from this camera using IMAQ USB, a snap every ~30 seconds. After about 1100 snaps LabVIEW errors out: IMAQ Vision: (Hex 0xBFF60488) Minimum coverage value should be greater than zero.
Any help would be greatly appreciated!Check this discussion
-
A message "Value in "Discount %" field is greater than permitted"
Hi Experts,
A message "Value in "Discount %" field is greater than permitted" will appear when adding an Issue for Production in production..Hi Karthick,
Check Discount Limit for User
Administration-System Initialization-Authorization-General Authorization
and check Max Discount Limit
Regards,
Sandeep kr. -
Total of %db time column is greater than 100 in AWR report
Hello,
I have a query regarding "To 5 timed foreground events" section of AWR report.
On many occassions I found that the sum of all the values in the %db time column as mentioned above is grater than 100.
How can percentage be greater than 100?
Event
Waits
Time(s)
Avg wait (ms)
% DB time
Wait Class
DB CPU
29,212
98.18
latch: shared pool
2,291
286
125
0.96
Concurrency
direct path read
147,998
112
1
0.38
User I/O
library cache: mutex X
4,831
92
19
0.31
Concurrency
log file sync
36,736
72
2
0.24
Commit
In the above case the total comes up to just 100.07 % but I have seen reports where the total goes beyond 120 % -130 %.
Can you explain why this happens, please?
Thanks,
RushiCan someone explain above situation, please?
-
Time values that add up to greater than 24 hours
Hi Apple SUpport Community,
I am trying to get a cell in Numbers to return a TIME value when the sum of two time values are greater than 24.
For example, if a worker has a shift that starts at 8pm and works for 6 hours and 15 minutes, the shift ends at ((20:00+06:15=26:15)-24:00)=02:15am the next day.
If I formulate a cell in numbers to add to time values, it comes return the nasty red triangle saying "The Formula's arguments can only contain one date value"
Thanks in advance for any help!
STa duration can be obtained by subtracting two time values (which are technically the date and the time). durations are specified as:
weeks, days, hours, minutes, seconds and milliseconds.
I do not know what you are trying to figure out...
- how long did the worker work? or
- when did the shift end?
can you state a question (without regard for the solution) so we can assist? Also a screen shot of what you enter and what you want as output would be helpful.
All that said you can subtract two times to get a duration. You can add durations to get another duration. You cannot add times. To specify that an entry is a time you enter in the format "0w 0d 30h 14m 22s 0ms" any of the entries with 0 may be omitted.
you can add durations in cells by using the "+" or "-" operator
as in A1-B1
where A1 contains "3h 45m" and B1 contains "1h 15m"
the result will be "2h 30m" -
Minimum coverage value should be greater than zero (host machine)
Hi,
I am working on an host machine (windows 7, LabVIEW RTE 2010, VAS 2010 (evaluate version)) with an application created on another machine (Windows XP, LabVIEW 2010, Vision Development Module 2011).
This application is supposed to aquire an image by a USB camera.
When I run this application on the development machine, it works fine.
On the host machine, I can see my camera with MAX and do whatever I want to do with MAX.
When I run the application on the host machine, the application starts but when it is supposed to use the camera I got thes error (see attached file).
I tried to uninstall and reinstall all Lab'VIEW"s softwares but I still have this issue...
Any idea will be appreciated!
Thank you!
Attachments:
screenshot.doc 34 KBGreetings, nicocmd;
First and foremost, it is excellent that you are now up and running!
In what concerns your question, do you mean to continuously see the image displayed in a live feed and only save it when the user clicks a button or some such? What do you mean with only using IMAQdx VIs? Would it refer to not using the IMAQ For USB VIs?
If you would desire to take in images from the camera and display them in a live feed, you could simply set up an IMAQdx acquisition and either use the Grab or the GetImage VIs and have a case structure in which you decide whether or not to save the image that was just displayed (or the next one that will be taken).
I did a tad of research and came across the following forum post; in it, another user posted a VI that might be of service to you, for it saves images into a tiff file.
http://forums.ni.com/t5/LabVIEW/IMAQdx-grab-and-save-images-i-e-PNG-TIFF-etc-not-AVIs/td-p/1044201
Finally, if you would mean using only IMAQdx VIs and not IMAQ, then I do not believe it is possible simply because the vision utilities (Such as creating the image memory location) will be part of the IMAQ palette.
Cordially;
Simon P.
National Instruments
Applications Engineer -
Import Sales Orders, error: "value must be numeric in property discountper
When i import Sales Orders, the system gives me this error: "value must be numeric in property discountpercent".
where is the problem?Hello Lorenzo,
If you carefully read the Error message, it say value must be numeric in property discountpercent
It pertains to the discount percent column and the value you have filled in it.
Please make sure you have only numeric values here. Also make sure that any numeric value is not accidentally saved as charecter type ( you can notice a green triange arrow at the left top corner of each column)
Suda -
Condition value of Tax condition type gets added to Total Value in Contract
Hi All,
I'm currently investigating an issue where there are 2 line items in an SAP Sales Contract. There is a human error in the second line where the billing end date is less than billing start date in the billing plan. Consequently, the second line has null Outgoing target value.
However, the header Total value in the Contract gets wrongly calculated as Basic condition value of 1st line + Condition value of tax condition type of line one due to this. When I modify the billing end date for the second line item to be a date greater than the billing start date, the above problem disappears and the total value of the contract does not include the tax component.
For eg.
Normal Error free Contract
Total Value at Header = 700.00 EUR
Material Outgoing Target val
Item 0010 MAT1 450.00 ( 450 + 50 (tax ) )
Item 0020 MAT2 150.00
Contract with billing plan error in second line
Total value at Header = 550.00 EUR
MAterial Outgoing target val
Item 0010 MAT1 450.00 ( 450 + 50 (tax ) )
Item 0020 MAT2 0.00
Any inputs would be most welcome.
Regards,
Venkatesh.
Edited by: Venkatesh Gopalarathnam on Jan 24, 2012 9:48 AMNo, i didn't.
Actually, i enter condition type and amount in sales order manually.
At that time my program which i modified at 'Define And Assign Pricing Procedures' in IMG should be run.
But the result of running is different from my purpose.
To change Condition value of condition type in sales order, are there any solution? -
Condition value of Tax gets wrongly added to Total value of Contract
Hi All,
I'm currently investigating an issue where there are 2 line items in an SAP Sales Contract. There is a human error in the second line where the billing end date is less than billing start date in the billing plan. Consequently, the second line has null Outgoing target value.
However, the header Total value in the Contract gets wrongly calculated as Basic condition value of 1st line + Condition value of tax condition type of line one due to this. When I modify the billing end date for the second line item to be a date greater than the billing start date, the above problem disappears and the total value of the contract does not include the tax component.
For eg.
Normal Error free Contract
Total Value at Header = 700.00 EUR
Material Outgoing Target val
Item 0010 MAT1 450.00 ( 450 + 50 (tax ) )
Item 0020 MAT2 150.00
Contract with billing plan error in second line
Total value at Header = 550.00 EUR
MAterial Outgoing target val
Item 0010 MAT1 450.00 ( 450 + 50 (tax ) )
Item 0020 MAT2 0.00
Any inputs would be most welcome.
Regards,
Venkatesh.Got the solution by making the condition type as manual.
Thanks.
Dhruba -
"Capacity must be greater than 0" error message
Hi experts,
I'm having some issues when trying to full optimize my application (on BPC 5.1). I get the following error:
Capacity must be greater than zero. Parameter name: Capacity
Save application and process from Analysis Services work without a complain but I'm not able to make it work from the application front-end.
The application is partitioned on a monthly basis, with 11 dims. I created a K2ServerDebug.log file on websrvr/bin for debug purposes but it seems that it's not creating the 4 other files
Any idea?
Thanks,
IbaiHi Sorin,
Partitions follow Fact<CubeName>_<TimeSlice> convention. I'm able to run the full optimize when there are few records (~100 records) on the fact tables to process but it keeps failing if I do the same test with ~ 1,000,000 records.
Surprisingly if I run the optimization with compression it will complete without errors but I believe this way all partitions are processed regardless the data is new or not. I'm interested in measuring performance so I would like to complete this test withou the compression option checked.
I've run some queries on data to make sure that all the members exist and are not calculated and checked the source was equal to 0 .
I'm running this test on a (dev) monoserver environment (sql server 2005 + SSAS + BPC 5.1)
Regards,
Ibai -
Java.sql.SQLException: Invalid precision value. Cannot be less than zero
Hi,
In my portlet application have several jsf tables which bind to several oracle tables. I have tested the portlet in pluto and tried to deploy it on liferay. However, I get an exception stating:
java.sql.SQLException: Invalid precision value. Cann
ot be less than zero
What could this exception mean? Has anyone else encountered this?
Marc
P.S. The trace is shown below:
Feb 6, 2007 12:34:56 AM org.apache.catalina.core.ApplicationDispatcher invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.RuntimeException: java.sql.SQLException: Invalid precision value. Cann
ot be less than zero
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(Cach
edRowSetDataProvider.java:343)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(Ca
chedRowSetDataProvider.java:300)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(Cache
dRowSetDataProvider.java:624)
at com.sun.rave.web.ui.component.TableRowGroup.getRowKeys(TableRowGroup.
java:806)
at com.sun.rave.web.ui.component.TableRowGroup.getFilteredRowKeys(TableR
owGroup.java:429)
at com.sun.rave.web.ui.component.TableRowGroup.getRowCount(TableRowGroup
.java:749)
at com.sun.rave.web.ui.component.Table.getRowCount(Table.java:307)
at com.sun.rave.web.ui.renderer.TableRenderer.renderTitle(TableRenderer.
java:400)
at com.sun.rave.web.ui.renderer.TableRenderer.encodeBegin(TableRenderer.
java:123)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.jav
a:683)I've dug deeper into this problem and am able reproduce the error in the Pluto server. To reproduce this error, I modified my Oracle jdbc driver from the JSC embedded driver (smoracle.jar) to the Oracle native driver (ojdbc14.jar). Now, I am getting the exception in my Sun Application Server:
What is the difference between ojdbc14.jar and smoracle.jar that could cause this problem? What can I do so that I can fix this problem for ojdbc14.jar?
Thanks,
Marc
P.S.
The problem is with the clob column (DOR_NOTE_TX). The stack trace is:
[#|2007-02-06T09:00:53.663-0800|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=16;|
Reader executing query ps=0 SELECT DOR_NOTE_DT, DOR_NOTE_TX FROM DOR.DOR_NOTE_DATA WHERE DOR_NOTE_CD='SECURITY' AND TO_CHAR(DOR_Note_Dt, 'mm/dd/yyyy') = '02/05/2007'
No Params|#]
[#|2007-02-06T09:00:53.679-0800|WARNING|sun-appserver-pe8.2|javax.enterprise.system.stream.err|_ThreadID=16;|
java.sql.SQLException: Invalid precision value. Cannot be less than zero
Message was edited by:
marcnikko
Maybe you are looking for
-
Diff between Log files and Trace files
hi What is the exact differences between Log Files and Trace Files. And the relevant informative URL/reference materils would be highly appriciated. Thanks Sekhar
-
SA PASSWORD from SQL Server Reports in TMG Threat Forefront Gateway
Dear friends. I have a question and the technical support did not resolve it. I need to know which is the SA password when you install the Forefront TMG because i need to made querys into the SQL Server management studio installed in the server. Than
-
Sending error messags as XML in Web Services
How can I send as an output in RFC function working as WebService error as XML. What I'm talking about? I use exceptions in my RFC function which is warking as WS. I want to recive form WS an error description as a XML. When WS is working correct it
-
Where can I download a older version of Aperture?
I had a MAC PRO with MAC OS 10.7.5 and need to install Aperture but the last version requires 10.9; Where can I download a older version of Aperture?
-
Hi All, I have a page thats very lenghty. On the button click can I scroll the page automatically to see the vbox thats at the bottom of the page or will the setfocus work? Thanks