VS 2008 only partially works

Hi,
I've installed the latest ODAC and ODP download (ODTwithODAC1110720.zip). After some confusion with Oracle Home I have managed to get everything to work - well almost. If I try to perform a select on smaller tables/views either in code or thru server explorer that is fine However for larger Views it does not work. No error is reported, just no data comes back. In fact I can pull one large table but large Views give me trouble. If I get the query wrong I get an exception. If I do something that does not return much data e.g SELECT COUNT(MY_CODE) FROM MY_VIEW that works.
I get the same behavior whether I do: a small program using OracleDataReader, a Query Window or a new Query.
If I use Sql Plus - there is no problem, all the data comes back.
I have noticed that the large queries that work in Sql plus are preceded by a noticable "think" period but the data streams back anyway.
Any suggestions as to what could be the cause? or are there error log's to look in to perhaps glean more information about what is going on?
thanks
mark

Oh well, solved my own problem.
Basically the Query actually was returning no rows; nothing wrong with ODP or vs2008.
The query implicit in the View specified a language (US) whereas my ODP.net install was at (UK). Once this was corrected everything worked like a charm.
The SQL plus install on my machine was old and probably specified (US) somehow, so it added to the confusion by working.
I ran a trace on my machine and that did not help. Running a trace on the server resolved the problem; the trace showed the query plan executed with results and then it was obvious that no rows were being returned.

Similar Messages

  • My iPhone 4 only partially works after water damage...

    Basically, I dropped my iPhone 4 down the toilet (which was stupid of me in the first place) and got it out of the water as soon as possible. I let out as much excess water as humanly possible without the tools, as I didn't have any on me at that point, and so I let it dry out. It wasn't working at all the next day until I had taken the back off and now I have got it to the stage of turning on and partially working.
    When plugged into a power socket it will turn on as usual and get to the screen telling me to plug it into iTunes, but when I plug it into the computer it will turn off and on at the silver Apple logo which means I can't connect it to iTunes. In both cases, as soon as I unplug it, it turns off straight away, but when plugged in it says that it has 100% battery.
    I wasn't sure where the major problem was and so I sent it off to a company who fixed that sort of problem, but they told me that there was some corrosion on the inside and that they were unable to fix it which was a pain, and because Apple don't cover liquid damage I don't know what else to try... I bought a new battery just in case the battery had become flooded, but this made no difference so it's definitely not the battery directly.
    Has anyone else had this problem and is there a good solution that might help? (And if possible I would like to keep what is on there, but this is not essential...)
    Thanks,
    Ben

    IF you would have taken it to Apple, you could have gotten it replaced for US$199. Now that it's been opened by a 3rd party, they will most likely not permit this.  If there is corrosion on the inside, it's most likely permanently borked. Sell it for what you can get for parts and buy a new one.

  • Javascript on iPhone only partially works

    Anyone having any trouble with Javascript on the iPhone? I have a site that I have to use for work. It will not work on my iPhone. When I disable javascript I get the not javascript version of the pages (which do not have all the functions of the normal page). It works perfectly on the iMac and Safari. Any suggestions?

    It is correct not all java script and apple work on iPhone Safari.
    Just open www.virtualemotion.com
    Select a Java virtual tour (any), it won't open it.
    Everything works on your "normal" iMac Safari and so also PC.
    To the same also QTVR are not supported by iPhone Safari.
    ... hoping that a sw update will add some more web functionalities...I imagine and hope to be only a question of priorities...MVP (minimum viable product... to make the June release date.

  • Lion Server push notifications to iOS 5 only partially working

    I'm attempting to enable push notifications from my 10.7.2 Lion Server to my iOS 5 and Lion clients. All services (OD, Calendar Server, Mail, DNS, etc.) are running off of the same server. Push for Lion clients works fine for IMAP and CalDAV. I see "Push" in iCal preferences -> account settings.
    For iOS 5 however I  only see push enabled for Mail. I have confirmed it works as well. However, Calendars and Contacts show "fetch" in Settings -> Mail, Contacts, Calendars -> "Fetch New Data" -> Advanced.
    iChat is running. I've verified all the iChat related ports are opened in the firewall.
    I have a "real" certificate for my domain and clients are pointed to that domain name.
    There are no errors in the logs. The caldavd configuration file in /etc/caldavd/ looks fine.
    I'd appreciate any ideas where else to look!

    Not sure but in well known ports is this
    2195
    TCP
    Apple Push Notification Service (APNS)
    Push notifications
    2196
    TCP
    Apple Push Notification Service (APNS)
    Feedback service

  • Importing mailboxes into Mail from Entourage only partially works.

    I am trying to import all my Entourage mailboxes into Mail.
    [The background of this is that I want to upgrade to Lion, but my version of Office won't work in Lion and I don't want to pay for a new version, so I'm going to abandon Entourage and use Mail].
    The process appears to work properly; there is no error message and Mail tells me that the mailboxes have been imported into a folder called Import.
    However when I look at the Mail mailbozes, all teh messages are not there. The import has worked up to a point and then just stopped. By this I mean all the actual mailboxes (and sub mailboxes) are in place, tbut only the first 50% or so of the messages are there. (Admitedly, there are a large number of mesages in my mailboxes and the import has worked through them logically by alpahbetical order of mailboxes.)
    I've also tried dragging the missing message across manually, but this doesn't work.
    Any ideas?

    Well there are some suggested solutions on here if you search for them. Hoever, I eventually worked around it by just importing a section of my old email at a time. A bit tedious, but it worked.

  • I am having problems sncing my iphone4 with i tunes.       I have just changed from a windows to mac and from cable sync to iCloud.  All works from imac to iPhone.  but from phone to imac only partially works.

    I canged name of calender on iphone and it has changed on the imac.  But none of my previous entries or new entries are going to the iphone.  If I add on icloud then the entry goes to both phone and imac.  I have tried taking calendar off icloud and saving to phone and then reinstating and merging, but nothing changes.  My contacts seems to be working fine.  That also previously was synced by cable.
    Anybody able to help me please

    WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
    Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

  • Arrow keys only partial working

    The arrow keys on my MBP has stopped working. They work as long as I hold down the shift key (for selecting text in a document) but on their own, they're completely dead.
    Since they are working when the shift key is pressed, I guess it probably isn't a hardware problem. Turning off or restarting didn't help, but there is probably some dead obvious solution to this that I have missed.

    For starters, I would assume the problem in your account is likely to be rooted in a login item: something you've installed that starts running as soon as you start up your computer.
    Go to Apple menu > System Preferences > Accounts, select your account, and click the Login Items tab. I believe you should see iTunesHelper, SpeechSynthesisServer, and System Events - all Apple software, and therefore not likely to cause problems. Of the other items listed, does any of them have anything to do with your keyboard? If so, disable it by selecting it and then clicking the "-" button below the list. If not, disable half of your third-party login items. Then close System Preferences, restart the computer, log into your account, and see whether the problem persists. If it does, disable the other half of your third-party login items and repeat the restart-and-retest routine. This procedure will tell you which half contains the cause of the problem, and you can use the same method to narrow things down further, re-enabling the items that are clearly not at fault as you go along. Post back with your findings.

  • Newly purchased album only partially working/downloaded..

    How do I get my full album of songs that I just purchased from Itunes.  According to Itunes, I have the full album, yet only 4 of the 15 songs were downloaded via the cloud, to my iphone, and only 1 song transfered to my itunes library.  I'm unable to download the rest of the songs because its says "downloaded" and all greyed out!  So frustrating!!!!  Does anyone know what is going on?????

    Hey imavaeia,
    As a first step in our troubleshooting process, let's try deleting and redownloading. I would first quit iTunes, reopen, and follow these steps:
    If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
    Delete the purchased song that is exhibiting the problem from your iTunes library.
    Click on the Purchased link in the iTunes Store to view your previously purchased music.
    Download your previously purchased song from this list.
    via: Songs in iTunes may not play back completely
    http://support.apple.com/kb/TS4357
    Regards,
    Delgadoh

  • VPN only partially working...

    I configured a VPN on my ASA5505 and it seems to be working just fine if I connect with my iPad or iPhone.  But if I use the Cisco VPN Client, I can authenticate but can't get to any other the server that I can access just fine from my iPad.  I can RDP from my iPad to servers but I can't RDP from my laptop to the same servers.  Any ideas what would cause this??

    Yeah, I've tried on 2 different computers at 2 different locations.  Both machines were Windows 7.  I just can't seem to figure out what would be causing this.  I can see traffic going through the tunnel to the ASA, for example from my logs....
    6
    May 11 2012
    13:12:18
    10.0.0.12
    63990
    172.16.20.10
    3389
    Built inbound TCP connection 89945 for backupisp:10.0.0.12/63990 (10.0.0.12/63990) to insidemgmt:172.16.20.10/3389 (172.16.20.10/3389) (matt)
    And I can connect to this same machine fine using the VPN client on the iOS devices and the Mac laptop.
    Here is a route print from my laptop while connected to the VPN client...
    C:\Users\Matt>route print
    ===========================================================================
    Interface List
    32...00 05 9a 3c 78 00 ......Cisco Systems VPN Adapter for 64-bit Windows
    13...1c 65 9d e8 ea e6 ......DW1501 Wireless-N WLAN Half-Mini Card
      1...........................Software Loopback Interface 1
    12...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
    46...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4
    19...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #6
    ===========================================================================
    IPv4 Route Table
    ===========================================================================
    Active Routes:
    Network Destination        Netmask          Gateway       Interface  Metric
              0.0.0.0          0.0.0.0     172.16.1.254     172.16.1.127     25
             10.0.0.0    255.255.255.0         On-link         10.0.0.12    281
             10.0.0.0    255.255.255.0         10.0.0.1        10.0.0.12    100
            10.0.0.12  255.255.255.255         On-link         10.0.0.12    281
           10.0.0.255  255.255.255.255         On-link         10.0.0.12    281
           10.40.40.0    255.255.255.0         10.0.0.1        10.0.0.12    100
            127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
            127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
      127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
           172.16.1.0    255.255.255.0         On-link      172.16.1.127    281
         172.16.1.127  255.255.255.255         On-link      172.16.1.127    281
         172.16.1.254  255.255.255.255         On-link      172.16.1.127    100
         172.16.1.255  255.255.255.255         On-link      172.16.1.127    281
           172.16.2.0    255.255.255.0         10.0.0.1        10.0.0.12    100
          172.16.20.0    255.255.255.0         10.0.0.1        10.0.0.12    100
      208.125.237.118  255.255.255.255     172.16.1.254     172.16.1.127    100
            224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
            224.0.0.0        240.0.0.0         On-link      172.16.1.127    281
            224.0.0.0        240.0.0.0         On-link         10.0.0.12    281
      255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      255.255.255.255  255.255.255.255         On-link      172.16.1.127    281
      255.255.255.255  255.255.255.255         On-link         10.0.0.12    281
    ===========================================================================
    Persistent Routes:
      None
    IPv6 Route Table
    ===========================================================================
    Active Routes:
    If Metric Network Destination      Gateway
    12     58 ::/0                     On-link
      1    306 ::1/128                  On-link
    12     58 2001::/32                On-link
    12    306 2001:0:4137:9e76:1499:3b10:53ef:fe80/128
                                        On-link
    12    306 fe80::/64                On-link
    12    306 fe80::1499:3b10:53ef:fe80/128
                                        On-link
      1    306 ff00::/8                 On-link
    12    306 ff00::/8                 On-link
    ===========================================================================
    Persistent Routes:
      None

  • Working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

    working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

    Try http://www.microsoft.com/mac/support.

  • Render Work Area only partially completes?

    Hello everyone,
    I have searched the Forum but not found an answer or discussion on this problem.
    My problem is that Render Work Area only partially completes, i.e. if I have several clips in the work area (all showing yellow in the status area) and I apply transitions or effects to several of them, such that the modified segments show red in the status area, I expect to be able to Render Work Area [ENTER] and have it render all the segments that are red.  But it doesn't.  It renders the first few red segments then stops.  I have to manually hit ENTER several times to get it to render all the pieces.
    I'm pretty sure this is not how it is supposed to work.  In previous versions of Premiere, it would render all red segments in one go.
    Does anyone know what I need to do to make it render everything in one pass?
    I did find this post on a different forum:
    http://www.dvxuser.com/V6/showthread.php?211157-Annoying-Premiere-Pro-CS5-Preview-Render-I ssue
    But no solution was ever reported.  The person just re-installed on a new machine and the problem did not appear on the new machine.  But I don't have another machine to try this on.  My machine is a Windows 7 64-bit i7.  I am running Premiere Pro CS5 5.0.0.  My footage is from a Canon 5D Mark II, 1080p, 29.97fps.  The footage natively displays and previews fine.
    Thank you very much in advance for any help you can give.
    Best wishes,
    Lloyd

    > I am running Premiere Pro CS5 5.0.0.
    You should install the Premiere Pro CS5 (5.0.3) update. The recent updates fix a lot of problems.

  • Stylish themes for Tumblr works only partially on Firefox 30.0.

    Hello,
    I've read plenty of forum threads but none of them solves my problem. Recently I updated Firefox to lastest version and it turned out that my installed Tumblr themes loads only partially - background changes but everything else remain the same as in Tumblr default style. It happens to all themes and Stylish is compatybile with Firefox 30.0. I've run FF in safe mode, I unchecked using hardware acceleration as someone suggested in another thread and basically nothing changed. Does anyone know the cause? It's not that stylish doesn't work at all and that's the problem.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Help - Crystal reports 2008 - will not work

    I am a Systems Administrator for a small company of 450 users.
    I am unfamiliar with Crystal reports
    We have a recent problem with Crystal Reports 2008, only 1 user in the company uses it.
    Since I recreated a windows profile on this users PC who has Crystal installed. 
    She is using .CSV files as her data sources. These CSV files are on her local machine. 
    She is trying to load an RTM template file, then do a refresh, and it asks for a datasource? 
    We try to select Excel, but it asks for a username and password to connect to the excel Datasource, and anything we type in fails. 
    Previously a refresh just worked. 
    I uninstalled reinstalled, still asking to select datasource. 
    I installed this originally 4 months ago and we did not have this problem. 
    Can you please assist?

    Hello,
    Sounds like possibly a Microsoft update which altered the security settings either on the CSV or the folder where it's located.
    Can she create a new report off the CSV if she copies it locally? I assume the csv is on a network share?
    Don

  • HT204406 I authorized a second computer on my iTunes account, and downloaded my library from the Cloud to my new computer. However, many songs only partially downloaded, and now I'm having a hard time getting rid of them to do full downloads.

    I authorized a second computer on my iTunes account and tried to get my first computer's library on my second computer via the Cloud. Many of the songs only partially downloaded, and I am having a hard time getting rid of the library with the partial downloads (so I can get full songs). I am considering nuking the current iTunes on the second computer and re-installing, giving myself a clean slate to work with. Is this the right way to go?

    How to use your iPod to move your music to a new computer

  • Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager

    Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager?
    when I check on Microsoft site it says
    Reports are not upgraded when you upload a report definition file directly to the report server
    or SharePoint site. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
    When you open an .rdl file in Report Designer in SQL Server Data Tools (SSDT), if the report was
    created for a previous namespace, Report Designer automatically creates a backup file and upgrades the report to the current namespace.
    This is the only way you can upgrade a report definition file.
    Now here is another confusing statement which says
    You can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server
    2012 report server and it is automatically upgraded on first use. The report server stores the report definition file in the original format. The report is automatically upgraded the first time it is viewed, but the stored report definition file remains
    unchanged.
    All I want to know is if I deploy a rdl made in 2008 r2 to 2012 will it work on the report manager of
    2012?
    <o:p>
    </o:p>
    Mudassar

    I have tested this fucntionality and can confirm that ssrs 2008 r2 reports work when you deploy them on new ssrs 2012 report manager .
    No Migration is required .
    I didnt even moved report server dbs .All I did is just deployed reports on the report manager and it worked .
    "You
    can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server 2012 report server and it is automatically upgraded on first use. "
    Microsoft needs to correct this the documentation is misleading
    Mudassar

Maybe you are looking for