VS 2013 error: "Attempted TextBuffer edit operation while another edit is in progress"

I´m using Visual Studio 2013 Version 12.0.21005.1 with VB.NET on Framework 4.5.50938, OS is Windows 7 SP1 32 Bit.
I´m randomly getting the error message
"Attempted TextBuffer edit operation while another edit is in progress"
when trying to edit a source file. The file then remains inaccessible until I restart Visual Studio.
This message seems to appear at random and out of nowhere, sometimes after running or debugging the program, sometimes in the middle of editing. I can edit one file, switch to another one and receive this error.
Sometimes I can work half an hour before this message appears, sometimes only a couple of minutes. I´ve been looking all over the web for solutions but can´t find anything.
This error is beginning to severely disturb my work, so any ideas would be highly appreciated.

Hi AndyF69,
Sorry for that we couldn’t repro this issue.
Please check whether you install any add-ins or extension tools in your VS, please disable/remove them, and check it again. I doubt that it would be related to them.
Please also run your VS in safe mode.
http://msdn.microsoft.com/en-us/library/ms241278.aspx
If still no help, please re-install/repair your VS.
Have a nice day,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

When attempting to edit a project in the PWA I receive the error: 'An error occurred while opening your project. Give us a few minutes and try again...' Project Server 2013

Hello,
I am hoping someone can assist with the error we are encountering when trying to edit a project from the PWA in Project Server 2013. I can click on the project name and go to the detail page and I can
click and see the schedule. However, if I click on a task in the schedule and attempt to edit it, I receive the following error:
'An error occurred while opening your project. Give us a few minutes and try again. If this happens again, contact your administrator.'
At this point I must click cancel twice to get rid of the error pop-up message. At this point, I am no longer able to look
at the schedule of the project either. Can someone assist with this issue?
Thanks

Hi antonio,
In addition to Phani's advice, which version of IE are you using?
Can you reproduce the issue on another mahcine and with another browser?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Attempted to perform an unauthorized operation error on windows 8.1 while installing SQL server 2008

Hi,
I am getting the error "Attempted to perform an unauthorized operation" on windows 8.1 while installing
SQL server 2008.
The specific error is The error is Attempted to perform an unauthorized operation."
at stepSqlBrowserConfigAction_install_ConfigNonRC_Cpu32 .
I have tried everything from copying to the C drive. I am the admin on the machine. I also checked access in registry. It already has acesss to HKLM\System\CurrentControlSet\Control\WMI\security
Can someone comment on how to resolve this issue. I also tried NT
AUTHORITY\SYSTEM but getting the same error.
Any help would be appreciated.

Hello,
Please note that SQL Server 2008 requires Service Pack 3 (SP3) to make it compatible with
Windows 8.1. Please perform an slipstream installation of SQL Server 2008 + SP3:
http://support.microsoft.com/kb/955392
If it fails again, please share with us the Summary.txt log file and the details.txt log file. The following article
may help you locate those files on disk::
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.100).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Cisco SSL VPN "The following error occurred while attempting the file operation: Unable to view the contents of the Domain/Workgroup. "

Hey People,
Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
le box, but when i click browse network and select the network name i get the following message
"The following error occurred while attempting the file operation:
Unable to view the contents of the Domain/Workgroup. "
Has anyone come accross this before?
Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing.
The connection goes WAN->BROADBANDROUTER>CISCO2821
Any helo would be much greatly appreciated.
Thanks in advance!

Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Office 365 - Access User Profile -Error: Attempted to perform an unauthorized operation

Hi,
I am using a console application to read the user profile data in office 365.
I am getting the error as "Attempted to perform an unauthorized operation", while running the console.
I have used the below code:
static void Main(string[] args)
Uri test_targetSite = new Uri(test_siteurl);
string decryptedPwd = Decryptdata(password);
foreach (char c in decryptedPwd)
securePassword.AppendChar(c);
SharePointOnlineCredentials onlineCredentials = new SharePointOnlineCredentials(login, securePassword);
//getting UserProfile Service
TestAdminUserProfileService.UserProfileService admin_ups = new TestAdminUserProfileService.UserProfileService();
admin_ups.UseDefaultCredentials = false;
string authCookieValue = onlineCredentials.GetAuthenticationCookie(test_targetSite);
admin_ups.CookieContainer = new CookieContainer();
admin_ups.CookieContainer.Add(new Cookie("FedAuth", authCookieValue.TrimStart("SPOIDCRL=".ToCharArray()), String.Empty, test_targetSite.Authority));
// Gets the first profile
GetUserProfileByIndexResult pResults = admin_ups.GetUserProfileByIndex(-1);
int totalUsers = (int)admin_ups.GetUserProfileCount();
int counter = 0;
//Loop through all UserProfiles and Add to custom Group
while (pResults.UserProfile != null)
try
// Get the next profile
pResults = admin_ups.GetUserProfileByIndex(Convert.ToInt32(pResults.NextValue));
How to fix this for Office 365?
Thanks

Hi,
Thanks for the reply.
1. How to check, which is the App pool account for office 365 portal?
2. Which account has access to user-profile service application? if yes, how to verify the same?
3. How to access Manage service applications in office365? Like in SharePoint 2010 or 2013
Go to SharePoint Central Admin > Application Management > Manage Service Application
Thanks

Error [36, 17, 145] occurred while attempting to drop allocation unit ID

Error [36, 17, 145] occurred while attempting to drop allocation unit ID 430989268287488 belonging to worktable with partition ID 430989268287488.
Error saw in mssql 2012 enterprise edition service pack 1. os:- windows server 2012..
Any solution team.

Hello,
Please apply the latest service pack and cumulative update for SQL Server 2012.
https://www.microsoft.com/en-us/download/details.aspx?id=43340
https://support.microsoft.com/en-us/kb/3037255/en-us?wa=wsignin1.0
My suggestion is based on the following thread.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/ae0e6f71-ff63-49ee-bcaf-c53fa4dea6e4/error36-17-145-occurred-while-attempting-to-drop-allocation-unit?forum=sqldatabaseengine
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

An error occurred while attempting to change modules while starting up LR 4.1. New install on a new

An error occurred while attempting to change modules while starting up LR 4.1. New install on a new MBP first time trying to start up

Just a guess, but since everything is new, perhaps you have some sort of permissions problem.
Make sure your user has write access to all the locations mentioned in this link:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html
Hal

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

SharePoint 2013 - Server Error in '/' Application - This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database

Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
Swanl

Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

When attempting to edit a PDF doc, I get "Adobe has encountered an unknown error" Why?

When attempting to edit a PDF doc, I get "Adobe has encountered an unknown error" Why?

Hi myarwema,
Are you using Acrobat on Mac OS or Windows (and what version?). You say you have version 11.0.0, but the current version is 11.0.10, so please choose Help > Check for Updates and install any available updates for starters.
Does the error occur regardless of the PDF that you try to edit? If the problem is widespread, I would recommend a repair/reinstall of Acrobat (if installing the updates doesn't help). If the problem occurs with just the one document, that PDF could be damaged.
Best,
Sara

TNS-12560: TNS:protocol adapter error, ORA-12535: TNS:operation timed out

I installed Oracle 9i (9.2.0.1.0) on a Windows XP machine (the machine is in a domain). There were no errors during the instalation, but I have problems connecting from the same machine using the sid. Here are some examples from a command promt:
D:\>tnsping orcl9i
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 31-OCT-20
08 17:43:22
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = timisoara01)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl9i)))
TNS-12560: TNS:protocol adapter error
D:\>sqlplus "sys/pass@orcl9i as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 17:54:54 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12535: TNS:operation timed out
Enter user-name:If I don't use the sid I can connect:
D:\>sqlplus "sys/pass as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 18:05:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>If I go to services I see that the service is running: OracleServiceORCL9I Started.
Thx.

Yes, the XP firewall is running. During the Oracle instalation it poped up twice, but I selected 'Unblock'. I can't turn it off because it is running using the domain settings, but I can add exceptions (programs or ports). Port 1521, tnsping or sqlplus are not blocked and there is an option 'Display a notification when Windows Firewall blocks a program' witch is checked.

[SOLVED]error: attempt to read or write outside of partition

Hello, I update my system at least once a week, sometimes I run pacman -Syu more than that. So this system is no more than about 7 days behind what is available today. Last time I did this the kernel got updated and it updated itself again or at least it just ran mkinitcpio, also my passwd and group changed, anything that was not represented in the pacnew version got a representation, this last one mainly featured a lot of changes to "/usr/bin/nologin" from the login false version, whatever it was, nothing that looks too fussy.
Reboot just to see what will happen and I am greeted with this:
Booting `Arch Linux, with Linux core repo kernel'
Loading Linux core repo kernel ...
error: attempt to read or write outside of partition
Loading initial ramdisk ...
unaligned pointer 0x1d
Aborted. Press any key to exit.
I happen to have a usb drive that has Arch Linux 3.11.6.-1-ARCH, so I put that in and get an environment I can work with. Chroot in and so I can run mkinitcpio -p linux, thinking that that is the problem, some error in the kernel, I actually end up using the command
# /usr/lib/modules
, since
# mkinicpio -p linux
won't run, it gives:
==> Building image from preset: /etc/mkinitcpio.d/linux.present: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux.img
hexdump: /boot/vmlinuz-linux: Input/output error
==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux-fallback.img -S autodetect
hexdump: /boot/vmlinuz-linux: Input/output error
==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
However,
# mkinitcpio -g /boot/linux.img -k 3.14.6-1-ARCH
will. Everything finishes with a success, exit out, reboot and bam, same message, so it is not the kernel at least not on its own. Here is what my fstab looks like:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda3
UUID=4dbfa319-4f88-49c1-a595-27faabfe4f57 / ext3 rw,relatime,data=ordered 0 1
# /dev/sda1
UUID=4C05-1A6B /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# /dev/sda4 LABEL=home
UUID=bff35508-596c-4d7c-a983-b6b0ddc4f6e2 /home ext3 rw,relatime,data=ordered 0 2
# /dev/sda2
UUID=e87030ad-3226-41e3-938a-5be3351e34ed none swap defaults 0 0
#efivars
efivarfs /sys/firmware/efi/efivars efivarfs defaults 0 0
#MySQL, linux version
tmpfs /var/lib/mysqltmp tmpfs rw,gid=89,uid=89,size=100m,mode=0750,noatime 0 0
and my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
While I am here I might as well ask this is this an appropriate boot structure?
/boot/
>>>>/EFI/
>>>>/>>>/grub/
>>>>/>>>/>>>>grubx64.efi
>>>>/grub
>>>>/>>>>/fonts
>>>>/>>>>/grub.cfg
>>>>/>>>>/grub.cfg.example
>>>>/>>>>/grubenv
>>>>/>>>>/local
>>>>/>>>>/>>>>/*.mo files
>>>>/>>>>/themes/
>>>>/>>>>/>>>>>>/starfield/*.png *.pf2 files
>>>>/>>>>/x86_64-efi
>>>>/>>>>/>>>>>>>/ *.mod files
>>>>/initramfs-linux-fallback.img
>>>>/initramfs-linux.img
>>>>/linux.img
>>>>/vmlinuz-linux
Anyone have any ideas on what I can do to get my system back?
Last edited by Never (2014-06-11 03:17:24)

Inside of my rescue disk I get:
# efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0005,0003,0001,0002,000A,0004,0000,0007,0008,0009
Boot0000 Windows Boot Manager
Boot0001* USB Flopp/CD
Boot0002* USB Hard Drive
Boot0003* arch_grub
Boot0004* ATAPI CD-ROM Drive
Boot0005* grub
Boot0007* CD/DVD Drive
Boot0008* USB Floppy/CD
Boot0009* Hard Drive
Boot000A* UEFI: SanDisk Cruzer Glide 1.26
my /dev/sda1 was /boot/ not /boot/efi, so I made that change, allowing /boot on / [/dev/sda3] to now be populated with part of the stuff on /dev/sda1 and /dev/sda1 would just have /boot/efi/, instead of all of boot, then ran:
# modprobe -r efivars
# umount /sys/firmware/efi/efivars
# modprobe -r efivarfs
# modprobe efivarfs
# mount -t efivarfs efivarfs /sys/firmware/efi/efivars
# efivar -l
returned a bunch of variables
# grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=grub --recheck --debug
# grub-mkconfig -o /boot/grub/grub.cfg
# efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0003,0001,0002,000A,0004,0000,0007,0008,0009
Boot0000 Windows Boot Manager
Boot0001* USB Flopp/CD
Boot0002* USB Hard Drive
Boot0003* grub
Boot0004* ATAPI CD-ROM Drive
Boot0007* CD/DVD Drive
Boot0008* USB Floppy/CD
Boot0009* Hard Drive
Boot000A* UEFI: SanDisk Cruzer Glide 1.26
arch_grub, whatever that was, went away. Pull out of arch-chroot, unmount sdaXs, reboot and:
ERROR: No boot disk has been detected or the disk has failed.
An extensive hp diagnostic check reveals... Nothing wrong.
A reboot and removal of all data written in /dev/sda1 and /dev/sda3/boot sectors reveals:
# mkdir /boot/efi/123
mkdir: cannot create directory /boot/efi/123: Cannot allocate memory
Which persist even on a restart and trying to mkdir into /mnt/arch/boot/efi/EFI while outside of arch-chroot. No idea why that is happening, oh well.

Com.splwg.base. error in MDM 2.1 while starting weblogic server

Error in MDM 2.0 while trying to start the application. Would be great if someone can give any pointers.
2013-01-19 18:41:22,791 [SchedulerDaemon] ERROR (support.context.ComponentContainerLookupHelper*) Didn't find lookup class for interface interface com.splwg.base.api.lookup.TableClassificationLookup*
com.splwg.shared.common.LoggedException: Didn't find lookup class for interface interface com.splwg.base.api.lookup.TableClassificationLookup
     at com.splwg.shared.common.LoggedException.raised(LoggedException.java:67)
     at com.splwg.base.support.context.ComponentContainerLookupHelper.getLookupFor(ComponentContainerLookupHelper.java:104)
     at com.splwg.base.support.context.ComponentContainer.getLookupFor(ComponentContainer.java:457)
     at com.splwg.base.api.datatypes.LookupHelper.getLookupInstance(LookupHelper.java:23)
     at com.splwg.base.support.hibernatetypes.LookupType.nullSafeGet(LookupType.java:65)
     at org.hibernate.type.CustomType.nullSafeGet(CustomType.java:124)
     at org.hibernate.type.AbstractType.hydrate(AbstractType.java:106)
     at org.hibernate.persister.entity.AbstractEntityPersister.hydrate(AbstractEntityPersister.java:2701)
     at org.hibernate.loader.Loader.loadFromResultSet(Loader.java:1541)
     at org.hibernate.loader.Loader.instanceNotYetLoaded(Loader.java:1473)
     at org.hibernate.loader.Loader.getRow(Loader.java:1373)
     at org.hibernate.loader.Loader.getRowFromResultSet(Loader.java:640)
     at org.hibernate.loader.Loader.doQuery(Loader.java:850)
     at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:289)
     at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
     at org.hibernate.loader.Loader.loadEntity(Loader.java:2042)
     at org.hibernate.loader.entity.AbstractEntityLoader.load(AbstractEntityLoader.java:82)
     at org.hibernate.loader.entity.AbstractEntityLoader.load(AbstractEntityLoader.java:72)
     at org.hibernate.persister.entity.AbstractEntityPersister.load(AbstractEntityPersister.java:3710)
     at org.hibernate.event.internal.DefaultLoadEventListener.loadFromDatasource(DefaultLoadEventListener.java:439)
     at org.hibernate.event.internal.DefaultLoadEventListener.doLoad(DefaultLoadEventListener.java:420)
     at org.hibernate.event.internal.DefaultLoadEventListener.load(DefaultLoadEventListener.java:204)
     at org.hibernate.event.internal.DefaultLoadEventListener.proxyOrLoad(DefaultLoadEventListener.java:251)
     at org.hibernate.event.internal.DefaultLoadEventListener.onLoad(DefaultLoadEventListener.java:148)
     at org.hibernate.internal.SessionImpl.fireLoad(SessionImpl.java:992)
     at org.hibernate.internal.SessionImpl.access$1900(SessionImpl.java:170)
     at org.hibernate.internal.SessionImpl$IdentifierLoadAccessImpl.load(SessionImpl.java:2336)
     at org.hibernate.internal.SessionImpl.get(SessionImpl.java:888)
     at com.splwg.base.support.context.FrameworkSession.get(FrameworkSession.java:1045)
     at com.splwg.base.api.datatypes.SingleFieldId.getEntity(SingleFieldId.java:182)
     at com.splwg.base.api.EntityToTableHelper.privateGetTableForEntityName(EntityToTableHelper.java:66)
     at com.splwg.base.api.EntityToTableHelper.getTableForEntityName(EntityToTableHelper.java:50)
     at com.splwg.base.support.changehandlers.CobolExtensionChangeHandler.getExitProgramName(CobolExtensionChangeHandler.java:137)
     at com.splwg.base.support.changehandlers.CobolExtensionChangeHandler$1.execute(CobolExtensionChangeHandler.java:129)
     at com.splwg.base.support.changehandlers.CobolExtensionChangeHandler$1.execute(CobolExtensionChangeHandler.java:126)
     at com.splwg.base.support.context.SessionExecutable.doInCurrentSession(SessionExecutable.java:174)
     at com.splwg.base.support.context.SessionExecutable.doAsReadOnlyInCurrentSessionIfAvailable(SessionExecutable.java:97)
     at com.splwg.base.support.context.SessionExecutable.doAsReadOnlyInCurrentSessionIfAvailable(SessionExecutable.java:86)
     at com.splwg.base.support.changehandlers.CobolExtensionChangeHandler.hasUserExits(CobolExtensionChangeHandler.java:133)
     at com.splwg.base.support.context.ContainerRegisteredEntityData.getChangeHandlerWrappers(ContainerRegisteredEntityData.java:250)
     at com.splwg.base.support.changehandlers.HandlerPrepareMethodRunner.fireForAllHandlers(HandlerPrepareMethodRunner.java:36)
     at com.splwg.base.support.api.AbstractBusinessEntity.performPrepareAddOrChange(AbstractBusinessEntity.java:311)
     at com.splwg.base.support.api.AbstractBusinessEntity.privateSetAbstractDTOValuesMiddle(AbstractBusinessEntity.java:341)
     at com.splwg.base.domain.batch.batchJobQueue.BatchJobQueue_Per.setAbstractDTOValues(BatchJobQueue_Per.java:511)
     at com.splwg.base.support.api.JavaPersistenceStrategy.updatePersistentBackendForAdd(JavaPersistenceStrategy.java:58)
     at com.splwg.base.support.context.FrameworkSession.createBusinessEntity(FrameworkSession.java:1453)
     at com.splwg.base.support.impl.AbstractDataTransferObject$1.run(AbstractDataTransferObject.java:78)
     at com.splwg.base.support.impl.AbstractDataTransferObject$JumpFromDTORunner.run(AbstractDataTransferObject.java:172)
     at com.splwg.base.support.interception.SessionInterceptionManager.notifyGenericCallStackJump(SessionInterceptionManager.java:293)
     at com.splwg.base.support.context.FrameworkSession.notifyGenericCallStackJump(FrameworkSession.java:2074)
     at com.splwg.base.support.impl.AbstractDataTransferObject.abstractNewEntity(AbstractDataTransferObject.java:84)
     at com.splwg.base.domain.batch.batchJobQueue.BatchJobQueue_DTO.newEntity(BatchJobQueue_DTO.java:389)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration$2.execute(TimerBatchJobSchedulerIteration.java:192)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration$2.execute(TimerBatchJobSchedulerIteration.java:185)
     at com.splwg.base.support.context.SessionExecutable.doInNewSession(SessionExecutable.java:65)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration.addRunInNewSession(TimerBatchJobSchedulerIteration.java:185)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration.scheduleRun(TimerBatchJobSchedulerIteration.java:175)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration.monitorTimer(TimerBatchJobSchedulerIteration.java:78)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration.access$100(TimerBatchJobSchedulerIteration.java:37)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration$1.execute(TimerBatchJobSchedulerIteration.java:56)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration$1.execute(TimerBatchJobSchedulerIteration.java:52)
     at com.splwg.base.support.context.SessionExecutable.doInReadOnlySession(SessionExecutable.java:149)
     at com.splwg.base.support.context.SessionExecutable.doAsReadOnlyInCurrentSessionIfAvailable(SessionExecutable.java:99)
     at com.splwg.base.support.context.SessionExecutable.doAsReadOnlyInCurrentSessionIfAvailable(SessionExecutable.java:86)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration.privateExecute(TimerBatchJobSchedulerIteration.java:52)
     at com.splwg.base.support.batch.TimerBatchJobSchedulerIteration.execute(TimerBatchJobSchedulerIteration.java:48)
     at com.splwg.base.support.cluster.SchedulerDaemon.run(SchedulerDaemon.java:47)
Edited by: 982930 on Jan 19, 2013 7:09 PM

Did you get an answer or not yet? if not then try doing artifact gen

Lately I've been importing photos from my iPhone and when I attempt to edit them they seem to disappear. Some reappper as a photo stream pic (some as the edited version and some not). But they no longer appear as a recent import. Lots more happens

Lately I've been importing photos from my iPhone to iPhoto and when I attempt to edit them they seem to disappear. Some reappper as a photo stream pic (some as the edited version and some not). But they no longer appear as a recent import. Lots more happens and I'm wondering if it's because I have a 5-year old Mac book or iPhoto is having issues. I'm not happy with disappearing photos especially after I've deleted them from my iphone after importing them to my macbook.
Has anyone experienced similar difficulties and what can I do?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Cannot install Visual Studio Community 2013 - Error message "Visal Studio 2013 Ultimate is installed..."

Hello,
I am trying to install Visual Studio Community 2013 in my machine but when I start the setup process I get the followingerror message:
Setup Blocked
Visual Studio Ultimate 2013 is currently installed on this machine. Please uninstall Visual Studio Ultimate 2013 and retry.
The problem is that I used to have VS Ultimate 2013 (Preview Edition, I think) installed on my machine but I've uninstalled it some time ago. It looks like something was left over in process.
What I've tried to do was to install VS Ultimate 2013 again, perform a repair operation and then uninstall it again. This uninstall process is reported to be successful. However, it did not solve my problem: VS Community 2013 installation still fails.
Does anyone have an idea how to solve this?
Thank you,
João Pedro

"I used to have VS Ultimate 2013 (Preview Edition, I think) installed "
Sorry to be the bearer of bad news, but this sort of situation is exactly why potential users of pre-release software are warned NOT to install test software on production systems. While a new software version is in development, one of the LAST things to
be finalized is the uninstaller. So, uninstalling a test edition often leaves behind unwanted artifacts.
In your situation, I'd do a clean install of my OS, then install VS.

VS 2013 error: "Attempted TextBuffer edit operation while another edit is in progress"

Similar Messages

Maybe you are looking for