VS2008 express SQL2008 Develper vs. latest VS, SQL Express

Hi
I have an older desktop with SQL2008 developer version. That's great because I'm wanting to do SSRS stuff. However, my VS2008 only has BI templates. When I select Other Project Types --> VS --> there is only a Blank Solution.
If I Search Online Templates, it finds nothing.              .................     I also have a laptop where I have installed VS2010, VS2012, VS2014 all express.
Problem with these versions is that express does not include BI, even though I've read places where it should.   I did install VS2014 Express with advanced features.       ........... At this point, I just want
an environment where I can play.   Either fix VS2008 express to add templates or preferably a later version that allows BI.   My laptop is running Windows 7.   My SQL 2008 developer version is only for Windows XP, Vista (not Windows
7).   Just an FYI, why I can't install my SQL2008 developer on my laoptop. Any quick suggestions would be wonderful. Trying to practice to get a J.O.B. Yes I'm on the lower end of the scale. Thank YOU!
Barb61

Hi Barb61,
According to your description, you want to use the Business Intelligence Development Studio (BIDS) for SQL 2008 developer version. Right?
In Reporting Services, BIDS is a shell of Visual Studio. It's not a part of Visual Studio. Please refer to the link below:
Introducing Business Intelligence Development Studio
So if you want to install BIDS for SQL 2008, you need to run the installation of SQL Server 2008 and select BIDS in feature support. As Olaf mentioned, you can install SQL 2008 with latest services pack on Windows 7.Please refer to:
Editions and Components of SQL Server 2008
Features Supported by the Editions of SQL Server 2008
If you want to use the BI templates in later version, you should install the SQL Server Data Tool for Visual Studio later version. You can download here:
Download SQL Server Data Tools
Reference:
SQL Server Data Tools (SSDT)
SSDT – Installation confusion
SSDT and Visual Studio versions
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Similar Messages

Relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express)

Hi,
I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
=========================
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
appr60ue.LIST
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Unable to get the objects for module "APPR60UE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
=========================================
Has anyone faced something similar in the past?
Regards,
Neeraj

Hi Helios,
That got resolved after I added the location of the dll in the PATH.
Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
The log looks like:
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe
-MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
gnumake: ***
[D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Regards,
Neeraj

UnsatisfiedLinkError for JNI DLL compiled with vs2008 express

I am trying to create a JNI DLL using Visual Studio 2008 Express.
I have read several places where -MD causes JNI problems but from what I've read, I need this option to create the DLL properly.
The DLL does get built cleanly and I have created a simple C application (obviously not calling the JNI functions themselves but the other functions that are in the DLL). This application runs with no problems.
As soon as I try to use the DLL with JNI, I get an UnsatisfiedLinkError: Can't find dependent libraries.
I have used Dependency Walker on the C application I created and it finds no errors; however, if I run it on the DLL itself, it does report an error trying to find msvcr90.dll which is in the winsxs directory under c:\windows so I assume this is the problem dependency.
I am running this on the same computer that has Visual Studio 2008 Express SP1 installed. This is a Windows XP Service Pack 3 computer running JDK 1.6.0_14.
Any help would be greatly appreciated.
Thanks

Right or wrong, I include some library files into my link statement (it's the only way I could find to clear up your question). I link in some standard window libraries as well as some of my own DLL whose functions are used by this DLL. I use a makefile to build my code.
Here is a compile statement and the link statement for my DLL:
cl.exe -I c:\progra~1\micros~1.0\vc\include -I c:\progra~1\mi2578~1\windows\v7.0\include -I c:/progra~1/java/jdk1.6.0_14/include -I c:/progra~1/java/jdk1.6.0_14/include/Win32 -I S:/wlw/Develop/Src/Include -I S:/wlw/Products/Src/Include -I S:/wlw/Products/Src/Include -I S:/wlw/Products/Src/LibSrc/RTA/Client/Include/Example -I S:/wlw/Products/Src/LibSrc/RTA/Client/Include/System -I S:/wlw/Products/Src/LibSrc/RTA/Client/Include/User -I S:/wlw/Products/Src/LibSrc/RTA/Server/Include/System -I S:/wlw/Products/Src/LibSrc/RTA/Server/Include/User -DRTA_DLL -D_BIND_TO_CURRENT_VCLIBS_VERSION -Zp4 -DWIN32 -D__WIN32__ -DWINVER=0x0400 -D_WIN32_WINNT=0x0400 -D_USE_32BIT_TIME_T -D_CRT_SECURE_NO_WARNINGS -nologo -W3 -Od -EHsc -MD -Z7 -c buildDate.c
link.exe -incremental:no -nologo -debug kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib -dll -out:S:/wlw/Products/Obj/Win32/Lib/rta.dll -implib:S:/wlw/Products/Obj/Win32/Lib/rta.lib eipc_client.obj eipc_usersys.obj eips_pccc.obj eips_cnxn.obj eips_cpf.obj eips_encap.obj eips_iomsg.obj eips_rtasys.obj eips_timer.obj rta_utils.obj eips_userdf1.obj eips_userobj.obj eips_usersock.obj eips_usersys.obj jniRta.obj jniRtaPlc.obj jniRtaPlcAddress.obj qcRta.obj qcRtaPlcAddressLink.obj qcRtaPlcLink.obj qcRtaProcess.obj qcRtaRead.obj qcRtaSlcRead.obj qcRtaSlcWrite.obj qcRtaState.obj qcRtaTimer.obj qcRtaWrite.obj Q:/Develop/Obj/Win32/Lib/tcpipNet.lib Q:/Develop/Obj/Win32/Lib/linkList.lib Q:/Develop/Obj/Win32/Lib/stdUtils.lib buildDate.obj
mt -manifest S:/wlw/Products/Obj/Win32/Lib/rta.dll.manifest -outputresource:S:/wlw/Products/Obj/Win32/Lib/rta.dll;2

Ms Sql Management Studio 2014 Express + Azure

Hi everyone
I have SSMS 2014 Express and I use Azure SQL DB with SQL Database Update V12 (preview).
Now I have the restricted access to my DB from ssms, but there (http://blogs.msdn.com/b/sqlreleaseservices/archive/2014/12/18/sql-server-2014-management-studio-updated-support-for-the-latest-azure-sql-database-update-v12-preview.aspx) talks about the enhanced
functionality. I can not find this update for ssms. Please help me, where I can get this update?

I have installed MS SQL Management Studio 2014. After that I have installed CU5 from link in your previous post.
There was no change. After your last post I have installed
CU6, but again there was no change.
Now I have this:
MS SQL Management Studio about window:
In Azure:
I'm sorry for russian language in screenshot, I don't know how to change it to english.
No error occurs.
GUI can not do anything with the database
in Azure. I can only see the list
of tables, and I can do a sql queries.
But in the local database in the GUI
all the features are present
Hi AndrewG42,
I notice that you are using the latest version of SQL Azure database (13.0.15). I suspect there’s no update in SSMS 2014 for this version of SQL Azure database.
In other words, these features (select top 1000 rows, table designer, etc) are only going to be present with SSMS connecting to Azure v12 which version number is 12.0.2000.8.
Personally, regarding to above issue, I recommend you submit a feedback at
http://feedback.azure.com/forums/34192--general-feedback. Your feedback is valuable for us to improve our products and increase the level of service provided.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Migrate from SQL2000 (SQL_Latin1_General_CP1_CI_AS) To SQL 2008 (Arabic_CI_AS ) for Arabic

Dear Support,
We have SQL Server 2000 with collation SQL_Latin1_General_CP1_CI_AS. We have the data indexed in Arabic.
We have an archiving solution (File360 from OpenText) which is connected to SQL server database and we were able to
read arabic through the system.
Now we need to upgrade SQL server from SQL2000 to SQL2008 for the latest version of archiving solution (which supports
SQL2008 -> SQL2012)
We created new database in SQL2008 with collation Arabic_CI_AS. Then We migrated the data using Backup-Restore method
into this database. We found the database collation converted to Arabic_CI_AS from SQL_Latin1_General_CP1_CI_AS, but
the column collation remain same (ie SQL_Latin1_General_CP1_CI_AS).
With SQL_Latin1_General_CP1_CI_AS collation, the output for "select ID_1032 from EP13_10 where ID_14=422394" was in
???? format.
We altered the column collation manually using the sql
"alter table ep13_10 alter column ID_1032 char(250) COLLATE ARABIC_CI_AS"
Then also the result was in same ???? format. But we could able to read and write arabic for new records.
We need a solution to convert our old data to Arabic_CI_AS collation.
Is there any alternate way of migrating the data ?
Kindly guide us how to proceed.
Thanks & Regards

We created new database in SQL2008 with collation Arabic_CI_AS. Then We migrated the data using
Backup-Restore method
into this database. We found the database collation converted to Arabic_CI_AS from SQL_Latin1_General_CP1_CI_AS, but
the column collation remain same (ie SQL_Latin1_General_CP1_CI_AS).
Hello,
The effective collation is define on column level, the Server/database collations are only default values.
The backup is a real 1:1 copy of the database and when you restore the old database to a newer server, you can a again a real 1:1 copy and that's why the column collation remains the same.
One Option is to create a new database with the required collation. Restore the old database under a different name; then you can copy the data from the old database into the new one.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Bug in Oracle SQL Developer

I had Oracle SQL Developer 1.5.0.53 and when I did a "Check for Update" it said no updates found, even though SQL Developer 1.5.1 was released on June 9, 2008. So obviously this is a bug you need to fix.
OK - So I downloaded the latest Oracle SQL Developer and installed it and when I opened it up, all my connections were gone!!!
That's another bug you need to fix.

See Does check for updates install 1.5.1 for some suggestions for Check for Update.
For installing 1.5.1 and then losing your connections, did you install in a new directory or over the top of 1.5.0? If yes, then reinstall again into a new directory. If not, did migrate your settings from 1.5.0? Without doing that 1.5.1 won't find your existing connections.
theFurryOne

SQL Server Reporting Services Integration

If anyone has been considering looking at SQL Services Reporting Service, a business intelligence tool from Microsoft, you will be glad to know that I have just submitted a project to code share that provides integration between SSRS and the Plumtree portal.
In brief, the integration code implemements the iAuthenticationExtension and iAuthorizationExtension interfaces, allowing SSRS to authenticate plumtree users and authorize them based on plumtree groups.
It might be a few days before it is available on code share, as it has to be manually reviewed.
Caveat: it works in Firefox/Safari, but not quite so nice as it does in IE. This is a Microsoft BI tool, after all. :)

Hi, Tim.
The description and questions were brought up in an email conversation
with a developer:
There seems to be a disconnect between the Plumtree environment and Microsoft's SQL Server Reporting Services.
The present configuration: .Net version of Plumtree 5.0.4 suite of servers Windows 2000 Server SP4 (fully patched) SQL Server 2000 with latest patches SQL Server Reporting Services 2000 with latest patches
The app in question gathers SSRS reporting criteria via .NET web pages.
The disconnect occurs at the call to SSRS.
Without the gateway - the call to SSRS completes and a web page containing the report is displayed.
With the gateway - the call to SSRS does not complete and no report is displayed.
I understand this is a problem that has been reported on the DevCenter.Plumtree.Com site by Tim Larson of Mission to the World
URL =http://portal.plumtree.com/portal/server.pt/gateway/PTARGS_0_0_9690_0_0_47/http;/prodgadget14.plumtree.com/publishedcontent/publish/sc___code_share/code_source/articles/sql_server_reporting_services_integration_.html?qid=84973886&rank=2
Can the call to SSRS be accomplished if gatewaying is turned on for this app? - Is there a workaround? - not gatewaying the app is not an option

Installing Visual c++ express and plugin wizard

Hi I am new to SDK and trying to get everything set up so I can begin development of an acrobat plugin in visual c++ studio express 2008.
I found the plugin wizard in the acrobat 7 sdk (absent from sdk 8) but I am having difficulty running it. I am getting the error "The system cannot find the file specified" after selecting the template under the new project menu.
I manually installed this plugin in the directory:
C:\Program Files\Microsoft Visual Studio 9.0\VC\Express\VCProjects
Anyone else run into this problem or have any suggestions?
Thanks,
Paul

Thanks for the fast replies!
Leonard: I would prefer to use Acrobat 8 SDK. Is this supported by VS2008 express?
PDL: Visual Studio app wizard is mysteriously absent from the version I downloaded. But I will try downloading again.
Thanks again
Paul

Anyone successfully set up connection pool in s1as with ms sql server 2000?

As subject. Since I have seen a lot of posts about the NoSuchMethodException issue with various dbms providers, and the only "official information" I found thru different forums, google, different sun/javasoft sites and forums are this:
http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsunone%2F8172&zone_32=NoSuchMethodException&wholewords=on
Which is wonderfully vague and provide not-so-much useful information...
As for the information and suggestion posted by other forum members, most or all of them have experience with setting up Oracle, DB2, mySQL, etc., not aimed for MS SQL Server 2000 (you may think, I am just asking for it running MS SQL server with Java... oh well, not my choice)
I still haven't seen any positive feedbacks on how this exception was caused and how to resolve it. I have literally exhausted all leads on how to fix this issue, so right now I'm only interested to know whether anyone in the forum actually have a successful connection pool set up with MS SQL server 2000.
My platform:
w2k sp3
SunOne app server, update1, JDK 1.4.1
latest MS SQL 2000 JDBC driver
This fails with the NoSuchMethodException error:
try {
InitialContext ic = new InitialContext();
DataSource ds = (DataSource) ic.lookup("test_db");
con = ds.getConnection();
System.out.println( "con is created -> " + con );
} catch (Exception ex) {
System.out.println( "failed -> " + ex.getMessage() );
This works just fine:
try {
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
con = DriverManager.getConnection("jdbc:microsoft:sqlserver://xxx.xxx.xxx.xxx:1433;DatabaseName=testdb;SelectMethod=cursor", "username", "password");
System.out.println( "con is created -> " + con );
} catch (Exception ex) {
System.out.println( "failed is fucked -> " + ex.getMessage() );
thanks,
--kuan

Hi,
Thanks for pointing out that article, I did not find it previously. After following the directions in the artile and your advise, now dbping seems to be able to connect to SQL server.
Thank you very much.
--kuan

Sql developer won't connect to internet to check for updates

Hi all,
When I try to check the latest updates, Sql Developer (2.1.0.63) says it can't access to Internet in order to search for updates.
The credentials that I gave are correct (proxy, port, username, password) : when I click on the "Test Proxy" button, it says everything is OK.
But when I click on the "OK" button, it won't connect.
Then I click on the "Cancel" button, and check the details and get the following stack trace:
org.xml.sax.SAXParseException: <Line 6, Column 39>: XML-20125: (Fatal Error) Attribute value should start with quote.
     at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
     at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1645)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1550)
     at oracle.xml.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1483)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1322)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:368)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:314)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:225)
     at oracle.javatools.xml.esax.spi.ExtensibleSAXParser.parse(ExtensibleSAXParser.java:65)
     at oracle.ideimpl.webupdate.parser.MasterListParser.parse(MasterListParser.java:47)
     at oracle.ideimpl.webupdate.CheckMasterListRunnable.run(CheckMasterListRunnable.java:148)
     at java.lang.Thread.run(Thread.java:619)
What is wrong ???
Thank you for your help,
Phil.
Edited by: user3182799 on 15 janv. 2010 08:56

Did anybody meet the same problem, please ?

Sql Developer not connecting to the DB

Hi
I have latest Oracle Sql Developer 3.2.1 installed, and I cannot connect to database Oracle 11g Enterprise Edition.. I typed correct SID, port number, user and password and it won't connect saying: "The Network Adapter could not establish the connection. Vendor code: 17002"
Strangely I am able to ping and telnet to the Database machine with the DB port
ping <hostname> got reply
telnet <hostname> <port> got connected.
The TNS Listener of the Database is up as I am able to connect to the DB from another computer.
Do we need to setup anything extra to connect to a DB?
Thanks in advance

Hi,
Item 4 in the following relies on my Windows 7 environment variables. Did you also try...
1. lsnrctl status
2. lsnrctl services
3. tnsping <tnsalias>
4. sqlplus sys/<pswd>@//%COMPUTERNAME%:<port>/<sid>.%USERDNSDOMAIN% as sysdba
The syntax in (4) requires specification of the SERVICE_NAME rather than the SID.
My fully qualified SERVICE_NAME happens to be <sid>.%USERDNSDOMAIN%
My fully qualified hostname is %COMPUTERNAME%.%USERDNSDOMAIN%, but %COMPUTERNAME% also works for me.
See if using the literal values of these variables in the SQL Developer connection definition helps.
Regards,
Gary
SQL Developer Team

EM12c: Add Target SQL Server 2012 Fails

EM12c: Add Target SQL Server 2012 Fails
Configuration:
EM12c platform:
Oracle Enterprise Linux 6.2(x86_64)
Oracle Enterprise Database 11.2.0.3 (x86_64)
Enterprise Manager Cloud Control 12c Release 1 (12.1.0.1) (x86_64)
Microsoft SQL Server Plug-In 12.1.0.2.0 deployed in the Management Server
Target:
Windows Server 2008 R2 Enterprise Edition SP1 (64-bit)
SQL Server 2012 (Enterprise Edition) (64-bit)
Microsoft SQL Server Plug-In 12.1.0.2.0 deployed in the Management Agent
Problem: EM12c fails to add a SQL Server 2012 instance.
Target Name: mssql_mcsdbsqlsrv2.esri.com
Target Type: Microsoft SQL Server
Agent: https://mcsdbsqlsrv2.esri.com:3872/emd/main/
* JDBC URL (Example : jdbc:sqlserver://<host>:<port>): jdbc:sqlserver://mcsdbsqlsrv2.esri.com:1433
JDBC Driver (Optional): com.microsoft.sqlserver.jdbc.SQLServerDriver
Database Username (Required for SQL Authentication): sa
Password of Database User (Required for SQL Authentication): ****
System Username (Needed when SQLServer is at remote location):
System Password (Needed when SQLServer is at remote location):
Connect Using Windows Integrated Authentication (Yes/No): No
Role (Optional):
Error:
MSSQLDetermineName_DynamicProperty;em_error=Could not connect. Error code = 0x8004100e
em_error=Failed while connecting to WMI.
Response;Can't resolve a non-optional query descriptor property [provided_sql_server_name] (ms_sqlserver_servername)
The sa login is enabled and I can connect from a remote machine to the MSSQL 2012 server using SQL Server Management Studio.
I have also added several default MSSQL 2008 instances to EM12c successfull.
I've installed the latest "Microsoft SQL Server Plug-In 12.1.0.2.0" in EM12c and deployed it to the target agent in the MSSQL 2012 machine
Does EM12c (12.1.0.1) support MSSQL 2012?
Thanks,
Marcelo Marques
Technical Manager, Esri
Edited by: Marcelo Marques - ESRI on Sep 26, 2012 9:12 AM
Edited by: Marcelo Marques - ESRI on Sep 26, 2012 9:13 AM

Hello All,
What is the latest information on MSSQL 2012 support on EM12c as a supported Target Deployment?
Thanks
Jan S.

The February 2015 release of SQL Server Data Tools is now available for download

We'd like to announce the availability of the latest February 2015 release of SQL Server Data Tools.
This update is now available for Visual Studio 2012 and 2013. For Visual Studio 2012, use the SQL > Check for Updates tool inside Visual Studio. For Visual Studio 2013, check the Visual Studio update channel (Tools > Extensions and Updates > Updates)
for this update. Alternatively, administrative installs are available via the link below.
Get it here:
http://msdn.microsoft.com/en-us/data/hh297027
What’s New?
Support for the latest Azure SQL Database V12 features
Improved Cross-Platform Schema Comparison
New advanced publish options
Fixes for customer reported issues
For more details, see the SQL Server Data Tools team blog:
http://blogs.msdn.com/b/ssdt/archive/2015/03/03/sql-server-data-tools-and-data-tier-application-framework-update-for-february-2015.aspx

While we are investigating this issue, you can revert to the November release with the links below. You will need to uninstall your current SSDT.MSI and then run the installer from these ISOs.
Visual Studio 2012 versions:
SSDT_11.1.41025.0_BR.iso
SSDT_11.1.41025.0_CN.iso
SSDT_11.1.41025.0_DE.iso
SSDT_11.1.41025.0_EN.iso
SSDT_11.1.41025.0_ES.iso
SSDT_11.1.41025.0_FR.iso
SSDT_11.1.41025.0_IT.iso
SSDT_11.1.41025.0_JA.iso
SSDT_11.1.41025.0_KO.iso
SSDT_11.1.41025.0_RU.iso
SSDT_11.1.41025.0_TW.iso
Visual Studio 2013 versions:
SSDT_12.0.41025.0_BR.iso
SSDT_12.0.41025.0_CN.iso
SSDT_12.0.41025.0_DE.iso
SSDT_12.0.41025.0_EN.iso
SSDT_12.0.41025.0_ES.iso
SSDT_12.0.41025.0_FR.iso
SSDT_12.0.41025.0_IT.iso
SSDT_12.0.41025.0_JA.iso
SSDT_12.0.41025.0_KO.iso
SSDT_12.0.41025.0_RU.iso
SSDT_12.0.41025.0_TW.iso

Which service pack should I install if I have SQL Server 2012 RTM version 11.0.2100.60

I read the recommendation "SQL Server 2012 RTM is no longer in mainstream support. If you wish to continue getting fixes, you should absolutely plan on migrating to the SP2 branch;" from
http://blogs.sqlsentry.com/team-posts/latest-builds-sql-server-2012/. I am not quite sure how I can migrate from RTM to SP2. Thank you in advance.
cy

Hi,
Yes RTM version of SQL Server 2012 is not supported. You have to apply SQL Server 2012 SP2 below link will help you in doing it
http://social.technet.microsoft.com/wiki/contents/articles/25632.how-to-install-sql-server-2012-sp2-on-standalone-sql-server-instance.aspx
Above link also has link to download SQL Server 2012 SP2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

ORA-31061 error while creating XMLType table with virtual column

I'm not calling it frustration ;)
but still... what about this one :
SQL> select * from v$version;
BANNER
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE    11.2.0.2.0      Production
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7        passing object_value returning content)
8        as number
9      )
10    )
11 )
12 ;
Table created.Now, on the latest version :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for 32-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7        passing object_value returning content)
8        as number
9      )
10    )
11 )
12 ;
      passing object_value returning content)
ERROR at line 7:
ORA-00604: error occurred at recursive SQL level 1
ORA-31061: XDB error: dbms_xdbutil_int.get_tablespace_tab
ORA-06512: at "XDB.DBMS_XDBUTIL_INT", line 1002Is there something I should be aware of?
Right now, I'm just evaluating the version so I can't submit any SR.
Thanks for anyone trying to reproduce the issue.

Just tested again on a new installation (64-bit server).
It works :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE     11.2.0.3.0     Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL>
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7                 passing object_value returning content)
8        as number
9      )
10    )
11 );
Table created
Now I'll try to see what are the differences between the two installations.
Thanks Dan and Marco for looking into this.
Edited by: odie_63 on 2 mai 2012 15:51

VS2008 express SQL2008 Develper vs. latest VS, SQL Express

Similar Messages

Maybe you are looking for