W-2c(s) Magnetic Media is not generating

Back in April 2009 we generated W-2c forms for 4 employees in our Production Client using the Reporting Period Date of 12/31/2008 and Consider Payroll Results up to date of 12/31/2008.  Today,  we want  to generate a W-2c for the same 4 employees,  and when I attempt to do this in our PRD environment no forms are produced.
What would cause the W-2c forms not to generate? 
Thanks,
Edited by: Carla D. Ivy on Jul 30, 2009 5:32 PM

See comments in BOLD.
I need to re-generate a W-2c for each of the 4 employees and I need a new file to send to SSA OKay File is submittied here. There has been no additonal payroll adjustments since we last generated w-2c(s) for these 4 employees. But we maintained some formatting of our W-2c form. If only form changes are done why do you want to print those 4 employees again. You sent them the W-2c and filed to authorities so what is your requirement?
I also see that there is a filing date set in our Production environment for W-2c(s). I have been troubleshooting this all day. I cannot figure out why we cannot re-generate W-2c(s) for these same 4 employees. As Ted said, you wont be able to generate same 4 employees unless you make additional payrol results adjsutment or remove the filing date. Removing filing date takes lots of effort. There is an option to delete the PRD run of Tax reporter for W-2c but you'saying that you filed so I would NOT recommend that to you.
Arti

Similar Messages

  • Magnetic Media is not reconciling with Payroll Reconciliation Report..

    Hello Team
    Can anyone help me how to proceed/what to look at if Magnetic Media is not reconciling with Payroll Reconciliation Report..
    Any insight into this will be highly appreciable.
    Regards
    Raspreet

    Hi Charlene,
    The Recommended way to Reconcile you tax fomrs is as follows.
    1. Take the actual 941's submitted to authority.
    2. Run 941 for all Quarters using SAP Tax reporter and Reconciliation report 941 application.
    3. Run W-2 in Tax reporter and take copy of W-3 and 6559
    4. Run Reconciliation report using W-2 Application.
    Now first match the all 941 totals for all Taxable and Taxes with W-3 total. Then match your W-3 with 6559.
    Remember the totals on your final report has to match by penny to penny. If there are any 941-C take them also into consideration.
    I hope this helps.
    Arti

  • Magnetic media

    What transaction is used to generate a magnetic media file, I used B1B2, but it is for Canada. These files are SSA files and where are they saved in the system. I can view them in the Tax Reporter but If I run for many employees, these files needs to be download to disk but how to get this files and what procedure is used to transfer these files.

    Hello JackDI,
    The mag media files are generated in Tax Reporter (US) and Year End Reporting (Canada). It's not clear in your update if you are not able to generate these files through these programs or you are looking another way to generate them. Could you please update us with more details?
    Kind regards,
    Felipe Grandi

  • Tax Reporter: magnetic media files in Excel format

    Most of the state agencies websites require a "Microsoft Excel Comma Separated Values File" or a regular Excel file for SUTA reports to be able to upload them online.
    Is it possible to generate the magnetic media files from Tax Reporter in one of these two formats?
    Not sure if I was missing a step or not, but the files are automatically generated in XML format.

    Hi Tatiana,
    May be below link would help you.
    PA SUI Magnetic media issue
    Just try doing the steps and see if it helps let you save file to csv.
    Thanks,
    Ameet

  • Error while downloading Detroit MI W2 Magnetic media File.

    Hello Guys,
    We are getting a Run time error while downloading a w2 magnetic media file for MI, and its only for a particular tax company.
    Any help is appreciated.
    ST22 Dump:
    Runtime Errors         CREATE_DATA_ILLEGAL_LENGTH
    Exception              CX_SY_CREATE_DATA_ERROR
    Date and Time          01/10/2011 13:58:44
    Short text
    CREATE DATA: Illegal value for the length of an object of the type "X"
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "RPCTRTU0_ALV" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not
    caught in
    procedure "DOWNLOAD_CTXFU0" "(FORM)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    A data object of the type "X" with length 0 was to be created using
    CREATE DATA. The value 0 is not within the allowed range.
    Allowed range for the length specification:
    Typ C, N, X: 1 .. 65535
    TYP P:       1 .. 16
    Thanks,
    Krish

    Hello Mr. Krish,
    I believe that this error has been corrected because you had to send the W2 form .
    But this issue was caused due to the fact that your file HR_F_W2_TAPE_DEC does not have a header line. The note 1553756 was delivered to correct this dump.
    Best Regards,
    Jaime

  • W-3 Magnetic Media

    I don't know if this is the correct place to post this question, but...
    This year we need to file our W-3 information electronically. When running W-2s out of Tax Reporter (PU19) we get a paper copy of the W-3 but not a file. I have looked in the configuration, and there is not a W-3 file format out there at all. I could create one, but I would think there should be one given from SAP because we cannot be the only company with this requirement. Has anyone run across this issue, and how did you solve it?
    Any help is appreciated. 
    Thanks,
    Mary Kerschke

    Hi Mary,
      I'm not sure if we have a similar situation, but we need to send the magnetic media to the local authorities this year and as you might have seen there is no forms available for local. I tried doing this by copying a MMREF form and create a 'Z' version and added to HR_F_W2 Tax form. Other than this place I'm not able to figure out where we should make further config. for the W2 job to pickup this Z form. If you have any info can you please mail me at [email protected]
    Thanks
    Anurag

  • Social Security wages missing from NC magnetic media

    Payroll was reconciling quarterly reports and found that the NC state magnetic media social security wages did not match the FED information. They were able to determine what information is missing, but now I need to know how to correct the NC state mag media.
    We have election workers who are allowed to make up to $1400 before any FICA taxes are withheld. Once the YTD value of election pay reaches that limit, the entire YTD amount of election pay is taxable.  Our consultant set up a wage type so that this YTD taxable election pay will automatically be transferred into a FICA taxable wage type. For all FED tax forms, the SS wages are correct; it is ONLY the NC state magnetic media that is incorrect (does not include the SS wages for the election pay over the limit).  Does anyone have suggestions as to what I can do to correct this?  The field on the mag media layout contains /703 and /403, but since there is no NC /703, those wages are missing on the tape.  The employee's remuneration is correct; it is the tax reporting that is incorrect.
    Thanks in advance for your advice!

    I am thinking that the problem is with the FICA taxable wage type itself. When I run a regular payroll and check the TCRT in ADDCU, there are no NC technical wage types, only FED (/303, /403, /404, /6xx, /7xx). Where do I get the NC technical wage types?  Is there something missing in BSI or some setting that is not set up for the state values?
    Thanks!

  • Non Resident County Tax Missing on Magnetic Media

    We have people that live in Ohio and work in Wayne County, Indiana.  The Ohio residents pay Wayne County, IN tax at the non-resident rate.  On our magnetic media for Indiana, only Indiana residents showed the Wayne County tax on the file.  Should another tax authority magnetic media be selected to report those Ohio residents that have the Wayne County, IN tax withheld?
    Thanks for any guidance you can provide.....

    Hi,
    Check in Tax reporter the form for W2 magnetic media for Michigan in IMG whether special download parameter 'Insert CRLF btw records'  is set as 'CRLF' in directly option. If not, add this & then check the form.
    You can also check SAP note for W2 for Michigan for any changes in year 2007. Generally SAP releases the note for the states for any changes.
    Hope this will help you.
    Thanks,
    Sarika.

  • CS6 Audio Mixer Track Keyframes not Generated

    Hi:  I am using CS6.  I have several audio tracks and started mixing audio using the audio mixer in write mode.  I got a few of the tracks done and it works fine.  I came back today to do the rest and I can't for the life of me get it to write the keyframes.  I have tried both "write" and "touch" methods, but no luck.  I tried adding a new track and no luck.  I tried adding a new sequence and then it works, but for some reason I can't add more keyframes to my primary sequence.  This ever happened to anyone else?  I found a couple indications that it has happened to people but no solutions were offered other than to make sure it is set to "write".  I am aware that this method generates track keyframes and not clip keyframes.  When I chose to see track keyframes, it shows the ones I made yesterday, but is not generating new ones today.  Please help!

    Try:
    Set up a new sequence and copy all the clips / media into it from the original sequence.
    It maybe that the original sequence has recorded a mixer move in Audio 1.

  • I cannot get a dvd to play. The error message says "media type not supported". I think it is a .m2ts. Any idea on how I can get it to play?

    I cannot get a dvd to play on my computer. The error message says in iDVD is "media type not supported".
    The DVD was produced with a video camera and is in HD format. I think the the format is .m2ts?
    Any ideas on how to get this to play?

    Check out > Mac App Store - Free MTS M2TS Converter
    and/or others at > playing .m2ts format in OS X - Google Search

  • Income tax is not generating on Bonus for second time through off cycle

    Dear All,
    I have an issue related to bonus. We have given bonus off cycle in the month of August 16th  income tax was deducted on bonus amout. Now again mgt is giving bonus through offcycle  in the month of November 10th but the problem is Income tax is not getting calculated in this month for bonus. We have checked the calculations every thing is fine.
    We have created 1 wage type for 1st time bonus as Special Bonus and 2nd time we have created another wage type as Diwali bonus. We have done configuration same as 1st wage type special bonus for Diwali bonus wage type.
    Let me know where it went wrong.
    Rgds,
    Prasad

    Hi Narendra,
    Thanx for the response, i tried the above but not generating WT/460.  can you explain the logic.,
    Changed BON5 to BON3
    created new Tax code ZTDR from STDR
    Assigned Bonus WT ( in 0267) to ZTDR in Table T7INT9
    didn't understand why /401 or MTDR or 9TDR
    Thanks
    Sanm

  • Miro line item not generated

    Dear All,
    I have facing one issue at the time posting in MIRO.
    I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
    Post key   description  amt                               curr.( USD)
    89              Stk.RM -IMP                                     32100.00
    96              PL.VND.RM.IMP GR/IR                     32100.00
    40              Purchase RM-IMP                            32100.00
    50              Purchase offset.                             32100.00
    And Miro Posting on date 23/03/2010
    Post key   description  amt                               curr.( USD)
    31           xyz Vendor                                    32100.00
    86           PL.VND.RM.IMP GR/IR                    32100.oo
    89           Stk.RM -IMP                                    -
    40           Purchase RM-IMP                          -
    50           Purchase offset.                           -
    But when I post for another po in migo on date 03/01/2010
    Post key   description  amt                               curr.( USD)
    89              Stk.RM -IMP                                     76800.00
    96              PL.VND.RM.IMP GR/IR                     76800.00
    40              Purchase RM-IMP                            76800.00
    50              Purchase offset.                             76800.00
    and miro posting on date 19/02/2010
    Post key   description  amt                               curr.( USD)
    32            yz Vendor                                       76800.00
    86           PL.VND.RM.IMP GR/IR                      76800.00
    89           Stk.RM -IMP                                      Line item not generated
    40           Purchase RM-IMP                             Line item not generated
    50           Purchase offset.                              Line item not generated
    Can any one tell why line item not generated for miro posting .
    Regards
    Milind

    Hi,
    The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
    Other wise it wont show those extra line items
    Please check group currency , global currency etc. for  your extra line items

  • XML Publisher question - Not generating a valid XML file

    I am working through an Oracle document that walks you through creating an XML Pub report. I am using HCM 8.9, Tools 8.49.15 and it has XML Pub installed and I have the Microsoft plug-in installed
    I have created a query and have downloaded an rtf template and now am on a page where you enter your data source and then click ‘Generate’ for the sample data file. I did it and it created ‘PERSONAL_DATA_PAY.XML’ which is created from a PS Query. However if I click on ‘PERSONAL_DATA_PAY.XML’ it generates a blocky text file that is not an XML file and I can’t go any further.
    Do you know why it’s not generating a valid XML file when I click on 'generate'?
    Thanks
    Allen H. Cunningham
    Data Base Administrator - Oracle/PeopleSoft
    Sonoma State University

    You mean to say that you create a new data source by specifying Data Source Type as 'PS Query' and Data Source ID as your query name, you are not able to generate a valid XML file (by clicking on Generate link).
    did you cross check your query by running it?
    On field change of Generate link, PeopleSoft uses PSXP_RPTDEFNMANAGER and PSXP_XMLGEN app packagaes and query objects to create the file
    It should work if you query is valid..

  • Inspection Lot not generated, with MIGO 561

    Hello All,
    Please help me with this issue.
    WHen i do MIGO with 561, inspection lot is not generated.
    So there is a setting in spro, if we check that, inspection lot wont be generated.
    So now in my IDES, i tried to uncheck that box.
    When i save this setting, I get the following error.
    "Fill table key for table T156Q only up to position 010".
    Please help with this issue.
    Regards,
    Piyush

    To load initial inventory in Quality stock and release it using Inspection lot  UD,   use movement type 563 instead of 561.
    With 561 movement stock is directly posted to un-restricted status. So there is nothing to be released from Quality stock.

  • Customized Seeded report to XMLP report but its not generating output file?

    I want to customize "Dunning Letter Print from Dunning Letter Generate" Report, which is called from "Dunning Letter Generate" Report
    Steps i followed to Customize reports are.
    1. Changed output format to xml for "Dunning Letter Print from Dunning Letter Generate" Report.
    2. Ran report to generate xml data and using xml data created RTF file
    3. Registered data definition and template with code and short name same which is ARDLP_NON_SRS
    Now while i am running report its completing normal, but its not generating output file giving Error like –
    "Unable to find Published Output for this request"
    “No Output File Exist for Request No - xxxxx”
    No Idea why its not picking template, Can anyone help me in this?
    Using:
    Oracle Applications : 10.0.5.2,
    MS Word 2007
    Thanks,

    I am not giving the solution, providing you a hint..
    This is the query you need to satisfy,
    SELECT NVL(R.DESCRIPTION ,CP.USER_CONCURRENT_PROGRAM_NAME)
    FROM FND_CONCURRENT_REQUESTS R, FND_CONCURRENT_PROGRAMS_VL CP,XDO_DS_DEFINITIONS_B XDS
    WHERE ( ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'U'
    AND R.REQUESTED_BY = :$PROFILES$.USER_ID ) or
    ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'R'
    AND R.RESPONSIBILITY_ID = :$PROFILES$.RESP_ID ) )
    AND R.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
    AND R.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
    AND XDS.APPLICATION_SHORT_NAME=
    ( SELECT APPLICATION_SHORT_NAME
    FROM FND_APPLICATION
    WHERE APPLICATION_ID=CP.APPLICATION_ID)
    AND XDS.DATA_SOURCE_CODE = CP.CONCURRENT_PROGRAM_NAME
    AND R.OUTPUT_FILE_TYPE='XML'
    AND R.STATUS_CODE not in ('E', 'D', 'T', 'X')
    ORDER BY R.REQUEST_ID DESC
    Go to system profiles and query for 'Concurrent:Report Access Level', responsibility you need and modify the profile name accordingly....

Maybe you are looking for