WAD stops responding to SAVE options

Hi there
I am new to using WAD in 2004s, and have noticed that after a while working on a template (say 90 minutes), the SAVE option(s) stop responding.
I can make changes to the template, press the SAVE button, wait for the cursor to change to show the process has finished, but when I reload the template in my browser, the changes aren't reflected.
I have paid closer attention to the status messages, and when the save option works correctly, I get a message saying that Save was succesful (or words to similar effect).
However, once it starts its "non-responsive" phase, all I get is the hourglass cursor then it changes back without the status message. The rest of the WAD seems to function fine, so I can open another template, and save that template, but trying to save the original template just doesn't seem to be an option.
This morning I then got a JIT Debugging error from .Net??
Does WAD run on .NET, and if so what version of .Net should I be running?
Cheers,
Andrew

Hi,
Whenever you make changes to Webtemplate, save immediately.  don't wait 90 min.... The connection between backend and WAD will be closed.
The BI 2004s frontend requires Microsoft.NET Framework 1.1 in it's 
newest version, which means that all service packs and hotfixes for
Microsoft .NET Framework 1.1 have to be applied.                   
Check these following notes, if you doubt.
877774  Pre-requisite for BI 7.0 Frontend
930350    Termination in Web Application Designer when you Drag & Drop 
918394    BI Frontend installation check tool                          
893348    Hardware and Software requirement for NW2004s                
889314    Using the BI Add-On for SAP NW 2004s                         
879786    NW04s BI Add-On Front-end Support Package 01                 
if it is useful assign points.
Regards,
Senthil Kumar.P

Similar Messages

  • Excel and Word 2013 stop responding after "Save As"

    Hello-
    After the last set of updates (7/8/2014), my Word and Excel "stopped responding" when I attempted to "Save As" any document or spreadsheet that I was working on.  I tried multiple suggestions to no avail and finally ran Microsoft's
    uninstaller for Office 2013.  I then installed all updates EXCEPT any of the 7/8/2014 updates.  Then I started installing those one by one.  The one that causes the failure for me is KB2880987.
    Has anyone else run into this issue?
    Thanks,
    Jaylene

    Don't worry, the installation might have just corrupted your local profile files when it failed, I'm sure it would work on another computer. For me, Office works fine I just want that one update off my update list/mind. 

  • Adobe Camera Raw (ACR) Stops Responding

    I am currently using Photoshop CS5 with Camera Raw 6, installed on a Window 7 x64 machine with 8 GB of RAM.
    I have no problem opening my raw files, but ACR repeatedly stops responding after a few minutes as I am selecting and making adjustments to raw images. Sometimes this will happen very quickly, but is usually after ten minutes or more of editing. Selecting an image whilst the yellow warning triangle is still showing in the main image seems to be a major factor, but I don't want to spend all day waiting!
    Once ACR has stopped responding, the only option is to close Photoshop via Task Manager, but I then loose everything (including deletions) that I have been working on for the past x minutes. It doesn't seem to matter whether the raw files are located on a local or network drive, but the problem seems to be more frequent across the network.
    The only solution seems to be to click 'Done' every five minutes, and to re-load the images, but this is a chore when I have 100 or more images to sort through. I have created a 10 GB scratch file for Photoshop, so it should have plenty of space.
    Is this a known issue, and has it been resolved in CS5.5? I did not have this problem in CS, CS2, CS3, or CS4.
    I have tried to download the CS5.5 update, but Photoshop reports that everything is up to date.
    Any advice on this problem would be very welcome.
    NN

    Does CS 5.5 do anything that CS 5.0 doesn't do
    Nothing, apart from supporting some enhanced functionality added to other CS products that allows developers to make better use of touch interfaces and so on (or something along those lines). I checked this with Adobe when it came out, and they informed me that I would gain zero from moving from CS5 to CS5.5: they are essentially exactly the same thing, just a bit of re-branding to keep up with the other Suite products. I think Adobe confused a lot of users with this move.
    I see there is a promotion running at the moment whereby CS 5.5 purchasers can upgrade to CS 6.0 free of charge when it becomes available.
    That promotion's for new users who might drop some cash on PS during the grace period where we're 'inbetween' versions (e.g. you'd be annoyed if you spent £650 on Photoshop CS5.5 and then two weeks later they released CS6 and you had to spend a further £190 to upgrade).
    If you want to upgrade from CS5 to CS6, then you get no benefit from upgrading to CS5.5. first: it would cost you exactly the same, and would simply add an extra uncessary step to the process. Nor would it help you overcome the issue you've reported with ACR.
    Hope this helps, and if I'm wrong on any points then I'm sure someone will correct me!
    M

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

    Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

    If you had never saved the file at any time, you have lost your work.
    Go to;  Apple Menu > Force Quit
    Start a new presentation, and from now on, after adding the first object to the slide, save the file.

  • Mouse stops responding and instead brings up a box with options like Search in Spotlight, etc..  What's happening?

    Sometimes when I'm typing and click on wireless mouse to correct a misspelling or the like, the mouse stops responding--freezes--and instead brings up a box with one set of options or another.  One box includes  Search in Spotlight, Search in Google, Look in Dictionary, etc..  The other box includes Help, Cut, Copy, Paste, Font, etc. 
    On some days, like yesterday, this happens every few minutes.  Today, however, it hasn't happened yet--oops, spoke too soon...it just happened again!
    I've checked mouse preferences and tried different options there to no avail.
    Can anyone help?
    Thanks...

    Soundl like you are activating the mouse "right click" by mistake and and getting contextual menus instead of the standard left click. I suggest that you turn off the right click option for a while in pref's and use the combination of;  "control + mouse click" to access these menus when you actually want them. This will ensure that a miss click is not the problem.
    If the problem is fixed, then turn the right click option back on so you can adjust your usage of the mouse with care to click on the right or left side of the mouse for standard or right clicks. this way you know that the problem is you and not the mouse.

  • When I try to save a file the system stops responding.

    When I try to save a file the system stops responding.

    Thanks, Bill. Here's what I get when I try to "save as"

  • Photoshop Stops responding on use of 'Save as...' dialogue box.

    Every time I try to save a file for web or using the 'save as...' dialogue box, i cannot select anything within in it or navigate to a folder etc... My photoshop then freezes and stops responding. I then have to delete the process from the task manager in order to stop it.
    I have tried everything from deleting preferences to completely re-installing it.
    Does anyone have an suggestions?
    Thanks in advance!

    Every time I try to save a file for web or using the 'save as...' dialogue box, i cannot select anything within in it or navigate to a folder etc... My photoshop then freezes and stops responding. I then have to delete the process from the task manager in order to stop it.
    I have tried everything from deleting preferences to completely re-installing it.
    Does anyone have an suggestions?
    Thanks in advance!

  • Programs stop responding when I try to print to PDF

    Info on what I'm using:
    OS: Windows 7 Home Premium, SP1, 64-bit
    Using Adobe Acrobat 8 Professional, version 8.1.0, up to date on updates
    In this example, Microsoft Office 2007, no add-ons besides the Adobe Acrobat add-in that allows the creation of a PDF (but happens in all programs)
    Problem:
    I have always created a PDF from a Word/Excel document by printing to PDF (File --> Print --> Select Adobe PDF as printer --> Hit OK). Generally, the next step that occurs is a dialog box appearing that prompts me to select the location where I want to save the PDF and to specify a file name. Several weeks ago, this process stopped working. Now when I hit "Ok" to print to PDF, no dialog box appears and whatever program I'm in freezes/stops responding. Aside: I have tried printing to PDF from several other programs to see if the problem occurs in those as well, and it does -- printing to PDF freezes whatever program I am attempting to print from. (For example, MS Paint, Internet Explorer, Firefox, even Notepad)
    Bullet point summary of what I have tried:
    Canceling the print jobs in the Adobe PDF printer under "Devices and Printers" (jobs say they are canceling but never clear from the print queue unless I go into Services and restart my print spooler) and reprinting (freezes again)
    Restarting computer (had no effect)
    Setting Adobe PDF as my default printer (had no effect)
    Setting TrueType font as "Native TrueType" under the Adobe PDF printer properties (Layout --> Advanced --> PostScript Options) (suggested in another thread I read about this problem; had no effect)
    Checking to make sure that Word had not "adjusted" the security settings for the Adobe add-in (disabling it) under the Trust Center (Adobe add-in was still enabled, so nothing to change there)
    Changing the printer properties to print directly to the printer rather than spooling first (had no effect)
    Saving as PDF using File --> Save As --> Selecting PDF as file type (does work and is an acceptable substitute except when I need to convert multiple files to PDF at once and don't have time to go in to each individual file and convert it separately)
    Repairing the Acrobat installation from within Adobe or from the Programs and Features menu under the Control Panel (does work, did fix the problem; but see followup below).
    Repairing the Acrobat installation worked when I did it a few weeks ago. Once I went through the process, I attempted to print a document to PDF and it worked. But this morning when I attempted to print another document to PDF, it froze Word again and has been doing that ever since, so it does not seem to be a permanent fix. I had succesfully printed several documents to PDF this morning before it stopped working; the document I printed to PDF immediately before the document that froze was the exact same as the document froze in every way except the actual text (formatting, document objects, etc.). So I don't think it was something in the content of the document that "broke" the Adobe PDF printer.
    I am sure I can try repairing the Adobe installation again, but I really do not want to have to do that all of the time. Does anyone know what the problem is? I haven't found anything that explains what's going on.

    Anyone?

  • Why does Shockwave Flash "stop responding" only around 1-3 pm? Works fine mornings and evenings.

    For the past couple of weeks I've been having this issue. Everything works fine all morning, and then mid-afternoon, Mozilla goes haywire and I get an "unresponsive plugin" error message, telling me Shockwave Flash "has stopped responding". It derails my entire computer system, everything ends up "not responding" (every single window, tab, program, even pictures and Word documents) then after I spend half an hour moving at the speed of molasses to save, close, and restart things, then it continues working just fine for the rest of the evening. It ONLY happens around 1 to 3 pm.
    It's aggravating to say the least. And I can't figure out why. Everything I have from Adobe is up to date, all of my plugins in general are up to date, and I've been using the same exact websites for work for years but this has only cropped up recently.
    Any ideas? Should I just take a long lunch and avoid my computer from 1 to 3?
    PS: I'm the only person home, and my wifi requires a password, so it's my internet service fighting a crowd or anything.

    I'm not paying for Norton for the toolbar, I like the Internet Security options in general.
    It has this "Vault" that stores all your website passwords, and "Identity Cards" to store financial information, addresses, etc. I feel safer having this information stored in Norton (which I gave the most unique and secure password I could think of) rather than storing these details on individual websites.
    Heaven forbid anyone ever steal my computer, they won't be able to access ANYTHING unless they can hack into Norton, which is the only password I hand-type. Before I got it, I used to have Firefox save it for me, but there was no security in that. Anybody could open up, say, Amazon.com, and log right into my account, and instantly have access to my credit card and change the mailing address. Using Norton Internet Security, they can't get into any of my accounts (shopping, banking, email, etc), and even if they do, they won't find any sensitive info available.
    As for Firefox 22, I just clicked "update" the other day (before then canceling) because it specifically said the plugin wasn't available, and I need it for the options I just mentioned. The next time it prompts me, I'll look again and see if it's ready yet.

  • IPhoto 11 has stopped responding. I was making a slideshow when it froze, I had to force quit to close it down but now when I try to open it starts to try to open but cannot and I can only close it down through force quit.

    IPhoto 11 has stopped responding. I had been working on a large slideshow for a week now and all was great when the slideshow froze when I tried to add another image. To shut it down I had to force quit.  When I have tried to re-open IPhoto starts to launch  but the rainbow icon just keeps going round and I have to force quit to get out of the programm. I cannot access any of the files in IPhoto and it wil not open. Any suggestions??? I would really want to save my images in IPhoto if at all possible as I do not have them stored anywher elese. Any help would be very apprreciated.

    Remember: you always need a back up for any important data on your computer. Always.
    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    What's the plist file?
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    If that fails
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Skype 7.0 keep saying "stop responding"

    I need help, my skype keep saying it stop responding, i have tried everyway possible from uninstall it completely, download the latest version, updating every drivers, renaming and deleting the skype folder even reducing my contacts but it keeps doing that, lately the error occured mostly during the call. 
    Faulting application name: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x0f2f4060
    Faulting process id: 0xffc
    Faulting application start time: 0x01d01cb2e79cbbb0
    Faulting application path: C:\Program Files\Skype\Phone\Skype.exe
    Faulting module path: unknown
    Report Id: 60aa3fbd-88a6-11e4-9378-001e101f7fb6
    Problem Event Name: BEX
    Application Name: Skype.exe
    Application Version: 7.0.0.102
    Application Timestamp: 54897add
    Fault Module Name: StackHash_5921
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 0f0b9628
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 2057
    Additional Information 1: 5921
    Additional Information 2: 5921c650f9fb40ed8b9ef298d7b4d76c
    Additional Information 3: 54d9
    Additional Information 4: 54d9b086c50d05d2c175eec1c004ae89

    aroundtheglobe wrote:
    I did, but after 12 hours it started to saying "not responding" again, what should i do then?
    Please,  run the DirectX diagnostics tool (32-bit option).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Desktop folders periodically stop responding

    Periodically my desktop folders stop responding and if I save anything from the web to the desktop it does not appear. Each time this happens I go to user/library/preferences/com.apple.desktop.plist and discard this and when I restart everything works well. My question is, why does this periodically recur without anything new being added or updated?

    Try turning off Spaces so it doesn't show in the menu bar (Sys Prefs-Exposé&Spaces-Show Spaces in menu bar).
    Another solution may be relaunching Finder (press Option key and then click-hold the Finder icon in the Dock, select Relaunch in the menu that pops up (alternatively press Option and rightclick the icon)).
    Some people have reported this problem when using certain software to download files (iGetter, SnapzPro). Are you using any such type of software?
    Try if the problem persists when logged into another user account.
    Try repairing permissions in Disk Utility (Applications/Utilities folder). Select the relevant volume and click verify permissions. Repair if necessary.
    Hope it helps.
    /p

  • ITunes 10.6.1 x64 regularly stops responding.

    Hello -
    My name is Erick and I'm an ACMT/Network Engineer; Apple-certified, but not Apple-employed.
    I have experienced an issue with iTunes 10.6 in general that has not been resolved by the latest update to 10.6.1. Upon opening the iTunes application, it initially responds but within 15 seconds freezes and is Not Responding. The unresponsiveness lasts up to five full minutes, then the program begins working again. The issue appears to begin as the iTunes Match cloud icon begins animating and checking for updates to my music library.
    The same situation also occurs regularly if/when I make changed to a Smart Playlist. The program stops responding for up to five full minutes, then works properly.
    Here's some additional information about what I've already attempted in efforts to fix the issue. Does anyone have any suggestions or recommendations for how I might remedy this issue? While it's not crippling my use of the application entirely, it does cause unexpected headaches and delays, and it'd be great to fix it.
    I've attempted to resolve the issue by opening a new library and using it temporarily to test, rebuilding the library by starting fresh and importing from my iTunes Library file, and I've also attempted to use iTunes 10.6.1 from a different user account. Finally, I loaded iTunes 10.6.1 onto my external troubleshooting drive which is running the same OS. I've seen the issue persist in each situation. I've also attempted to run iTunes in 32-bit mode as I experienced some success with this fix related to other issues in the past.
    I am using an iMac 27" with the quad i7, 16GB, and a 1TB hard drive. All of my music is on iTunes Match and none of it is being stored locally on this machine. My TV and Movies are being stored on an external 2TB drive, as is the iTunes Library file itself.
    I would be happy to provide any logs or additional information that could help resolve this problem. I appreciate any assistance and hope to have this resolved at some point. My iMac is typically on 24/7 as it operates as a streaming server for services like StreamToMe, SugarSync, Plex, and other file services. Additionally, iTunes is typically open 24/7 to provide streaming ability to my Apple TVs (1080p versions), though I do have a scheduled task which exits and re-opens iTunes at 4:30AM to prompt syncing of my iOS devices before I head to work (putting the latest unwatched media on them).
    I'm sure some of this is unnecessary or extraneous information, but I wanted to be thorough in my explanation and context. Thanks again for your assistance, everyone.

    I have resolved my issue with iTunes' unresponsiveness and wanted to post the solution for anyone who might be experiencing similar symptoms. It was really quite simple to fix, I just didn't see it for what it was:
    iTunes Match was causing iTunes to stop responding for several minutes at a time, and several times a day.
    iTunes Match - which also forces Genius Mode to be on (something that used to cause my iTunes 10.5 to freeze before I turned it off) - would regularly attempt to refresh my database of 21,000 matched songs (none of which were stored on the computer - just in the cloud) and when it would attempt to update or refresh that library, the program would stop responding.
    The constant queueing of iTunes Match / Genius also caused iTunes to consume a significant amount of RAM - something that was also causing issues and which I posted about in another discussion.
    So, the simple solution was this: Turn iTunes Match off and iTunes quits freezing.
    Now, that of course completely eliminates the usefulness of iTunes Match since the music is no longer accessible on this machine in this iTunes Library. So how to restore its usefulness without recreating the problem? Slightly more aggravating, but still working right: I created a separate, fresh new library and named it iTunes Match. When I need music, I hold option when selecting the iTunes app and select my Match Library, which has NOTHING else in it but iTunes Match. When I'm done with the music, I switch back to my 24/7 media streaming library that has my 2TB of TV Shows & Movies (and device sync relationships) in it.
    It doesn't seem like iTunes Match causes freezing and RAM ballooning all by itself, it just seems like in a library that's also full of other stuff, it's the final straw that kills the performance. Split the libraries up and things seem to work really well in both.
    Not a perfect solution, but until the next release of iTunes, this may be the best bet. I hope this helps someone else out there, but it at least cleared up my issue. Thanks for reading.

  • Firefox 15.1 stops responding for no apparent reason!

    As the title says, Firefox 15.1 stops responding for no apparent reason!
    I just did a re-format of my system disk and I re-installed Vista 64-bit on it. I have obviously re-installed everything from Windows updates to chipset, graphics and sound drivers. I also pulled down the latest and greatest version of Firefox which at the time is 15.1. So installed that too.
    Every now and then Firefox just stops responding for no apparent reason. It looks like it is processing the request (after clicking a link etc.) but it then it's just a silence... nothing happens!
    It doesn't even say it can't load the page and Windows doesn't even say that it has stopped responding. Not even after I click like crazy on the Firefox interface like different buttons and tabs and on the web page... not even then does it say "not responding" in the title bar of the window, which is usually the case when you deal with programs that are not responding immediately (you get that dialog that asks you if you would like to close the program or search for solutions online). Just nothing!... it's only quite and does nothing....
    At the same time, all other programs are working flawlessly, such as the Explorer (Windows Explorer), or even Internet Explorer. And Internet connection is not lost!
    I have no add-ons or extensions installed whatsoever. I just installed Firefox! I haven't even had the time to install Java yet. All I have is Adobe Flash player. That's the only extra. Otherwise it's in its' original form, default settings, etc, etc, etc.
    Why is it acting up like this?...
    I'm surprised that there even is such a thing as Firefox 15. This one came at the end of August, correct?
    I have been on Firefox 14.x something before I re-installed Vista. For a good reason so! This is why I hate the new update model of Firefox and I don't jump on the next train (version) unless it's safe and I'm having compatibility issues with the one I use at the moment. This is why my first step after installing Firefox always is to disable automatic updates! I hate it when the software vendors are pushing out their latest software versions forcefully.
    Frankly, I think this new Firefox version of yours is crap. It's not properly tested and it doesn't belong in the official release channel. This is more like a nightly build or something. It probably has some memory leak, despite the promises made by Firefox engineers that it will not have memory leaks and that it would be the fastest version of Firefox ever. I don't really need a faster browsing, I need a stable browser for reliable browsing. The speed of this Firefox version is close to ZERO! When it's not responding at all...
    I have been a fan of Firefox since 0.8. I will be probably ditching this latest version and going back to an older version like 13 or 14 that's more closer to the reality and not in this fantasy world of fastest, greatest, latest, version this, version that, latest features. I just want a browser that works man!... I'm getting tired of Firefox. I may even ditch it altogether in favor of.... I don't know.... Safari?... Chrome?.... I might even go back to Internet Explorer after like 12 years of absence.

    please try to uninstall the adobe flash plugin from the windows control panel. afterwards manually delete any leftover files in ''C:\Windows\SysWOW64\Macromed\Flash'' and download & install the plugin again (uncheck the option to install the bundled security software): www.adobe.com/go/getflashplayer

Maybe you are looking for