Waht t-code do I use to view the details of a new customer?

Please suggest if you know of a t-code that would display the details of a newly-created customer in the customer master in a report form except fd03 and xd03. WE are using t-codes S_ALR_87012215, OV51 and FDK43 for purposes of getting the audit trail of updates made in the customer master data but these t-codes do not include new customer.
Thanks gurus!
Frances

Hi Frances,
use trasaction VCUST --> enter sales arae details (other info if you know) and execute.
you can also use VC/1 (but as of release 4.0c it is no longer avaibale. you can use report RVKUSTA1 instead)
altertively
se16 - table: KNA1. enter the date of creation then you will get list of the newly created customers.
Hope it helps you.
Br, Sats.

Similar Messages

Is there a t-code that allows you to view the AUC Settlement Log?

One of my counterparts in a different region would like to review the AUC Settlements for the prvious month. Is there a t-code that allows one to view the AUC Settlement Log or is there a special procedure required to view those results?
thanks in advance for your help.
Dan

This was perfect. By the way the t-code for program RAHERK01 is: S_ALR_87012058
Thanks to everyone that replied. The other two reports will help with some other needs.
Dan
Edited by: Daniel Goodhart1 on Nov 10, 2011 5:14 PM

Unable to view the details of BAdi method

Guys,
Using SE18, I was able to view the different methods inside a particular BAdi. I had double clikced on a Method name and was able to view method parameters. However, I am not able to view the details of this method by double clikcing on it.Can I go much deeper at this level and just view the code with out an access code ?
IV_PAREAID          Importing     Type     /SAPAPO/TS_PAREAID
IV_INFOPROV          Importing     Type     RSINFOPROV
IV_VERSIOID_TO          Importing     Type     /SAPAPO/VRSIOID
IV_KEYFIGURE_FR          Importing     Type     RSDIOBJNM
IV_RELEASE_TYP          Importing     Type     /SAPAPO/MSDP_RELEASE_TYP
IT_FREE_CHARVALUES     Importing     Type     /SAPAPO/TS_SEL_OBJECT_TAB
IT_TAB               Importing     Type     /SAPAPO/TS_TAB_EXT_TAB
IT_COLS               Importing     Type     /SAPAPO/TS_COLS_EXT_TAB
IT_LINES          Importing     Type     /SAPAPO/TS_LINES_EXT_TAB
ET_MSG_TAB          Exporting     Type     /SAPAPO/TS_BAL_MSG_TAB
CT_MATLOC_TAB_DETAIL     Changing     Type     /SAPAPO/TS_MATLOC_TAB_TAB
CT_PLOB_VALUES          Changing     Type     /SAPAPO/TS_PLOB_VALUES_TAB
CV_CHANGE_SPLIT          Changing     Type     FLAG
Further, what does the prefix IV, IT, ET, CT, CV stand for and whats their significance ?
Thanks

Its just a naming convention :
Subcomponent name
    Name of a subcomponent of an object type, that is, a parameter or an
    exception. The name can consist of alphanumeric characters and the
    special characters underscore (_) and forward slash (/).
    The name may only contain uppercase letters. The Class Builder
    automatically converts lowercase letters into uppercase. However, if you
    use the Class Library API to insert a name, there is no automatic
    conversion, and an error occurs.
Yes you can define internal table in Method and its same has writing a program in SE30 like can call function module etc in method.
You can debug BAPI method by entering into mehtod and type /h (where you write transaction code ) and enter , it will take you to debug mode.
Manish

Cannot view the detailed Email date and time about the meeting request

Hi,I am unable to view the detailed message and Date and time of a meeting request in the default Email app in my Sony Xperia P mobile. Even when i select the calender it does not defaultly go to the meeting date. I need to manually select the date to see the meeting. I cannot see the meeting details without accepting it.I have seen the better behaviors on HTC One V and Galaxy Nexus where full meeting details including message, Date, time, venue appears in the meeting request message.Is there any setting which needs to be changes or is it the limitation of the phone app.Regards,Pratik Ranjan

Hi Johan,Im also seeing this on my xperia s, ICS. Here's some additional info i have after some testing:Work have Exchange 2010, I have sent calendar invites from outlook 2007 and 2010 clients and it works for the 2007 clients as it automatically adds the meeting details into the body of the request, something it doesn’t do in 2010, so it may be the way the calendar form has changed in 2010. It also works fine when i get an invite from an external person.This however is just adding the text into the body, I too have tested with the HTC One S and Samsung Galxay S3, bith use the stock email and both display the time as part ofthe invite no tin the body of the invite,
In doing the testing I have also found another issue. I have found that it doesn’t inform you of a calendar conflict.ThanksMike

Unable to view the details data in "Employee Self-Service 4.0" of HRMS

Unable to view the detail data in "Summary of Absences" when click the "Leave of Absence " button in "Employee Self-Service 4.0",
the whole login path is : "Employee Self-Service 4.0" ===> "Leave of Absence "
It shoud be seen the "Summary of Absences " ,bacause there are data in the datebase ,but when I click in it shows "No data exists."

Dear user11977612 :
Thank you for your answer, I have been check the profile :HR: Self Service HR Licensed, It had set YES. Thank you! But it still no records
Dear Naveen:
The page can open with IE7 and it just can not be shown the detail records (llike in "Absence Type" the detail ===>Advance Leave ) in the IE page.
Regards,
Edited by: user11975899 on 2009/10/13 下午 7:17

How can I view the details of a pending plan change?

I received a flyer saying I could probably save some money if I came in and changed plans. I went to my local Verizon store and met with an associate who set me up with a new plan to start next billing cycle. He didn't give me any paperwork and I can only find the details for the current plan. How can I view the details for the new one?

Hello pitviper1091!
I apologize that you did not receive a receipt in the store. You cannot view a future dated plan change on My Verizon, until the date that it goes into effect. It should go into effect on your new bill cycle. You could return to the store to request a copy of the paperwork, or we could assist you in checking your account to confirm what changes will occur.
MichelleH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

What VNC can be used to view the desktop of a SPARC Solaris 10 virtual machine

Visual Desktop is need to run some applications in our test and development suite. Is there a way to enable/view the desktop from a virtual machine built on the sparc platform running Solaris 10 or higher?

I am using Oracle VM Manager to build virtualized operating systems. The named domain types or virtualization mode is PVM. This is a new area for me so my apologies if I get the terminology wrong or don't answer your question properly.
Hope this helps.
Thanks for your response
Brad

Screenshot - when option key is being used to view the info

Hello
I want to take a screenshot of the "WIFI detail information" that you can view ONLY, if you hold the "option key" and select the WIFI from the menu bar wifi icon. If you do this (option key while selecting wifi) then apple yosemite osx shows you the detailed information about the wifi you are using in real time e.g. speed, channel, noise etc.
I wanted to take this "Screenshot" of the wifi settings I can see, and select the wifi hot spot by my ISP but i cannot take a screenshot as the standard screenshot keys are not accessible if I am using the option key already.
I need this screenshot, to try and help me troubleshoot a problem. That problem is --- my local ISP is trying to tell me there is a problem with my apple macbook and my apple iphone (3gs), as even though I select the wifi, no internet is coming thru and my iphone uses my mobile broadband rather than the free wifi hotspot, my ISP as been marketing is available to me. This problem is intermittent. Sometimes it works as suppose to and somedays it does not. As a temporary measure, I turn OFF mobile data and then i know for sure when the wifi is working or not.
So in my troubleshooting steps, I wanted to show the ISP the difference I see of their WIFI settings, on the days it works and the days it does not work. As same macbook and same iphone device and same ISP plan(number) and same free wifi hotspot location trying to connect to the ISPs free wifi hotspot. In fact I have tried 3 of the free wifi hot spot locations on the days it does not work in location 1 and all the same problem, no internet.
thankyou for your time
regards,
fixed title -- Message was edited by: seaseasea

sea3,
After displaying the WIFI detail using the option key, use Command (⌘)-Shift-3 to take a Screenshot of the entire screen.

T.Code for Viewing the details of characteristic in Production order

Hi Gurus,
During the production Order Stage , I want to see the MIC and value that I have mentioned for the operation in the routing . I don't want to see from the routing.
Is there any reports or option in the production order from where, I can see the details of MIC and Values that I have used in the routing.
What is table name where MIC values stores in the production order.
Thanks in Advance.
Srinivasan
Edited by: srinivasan Lakshmanana on Jan 12, 2008 3:07 PM

Hi Gurus,
During the production Order Stage , I want to see the MIC and value that I have mentioned for the operation in the routing . I don't want to see from the routing.
Is there any reports or option in the production order from where, I can see the details of MIC and Values that I have used in the routing.
What is table name where MIC values stores in the production order.
Thanks in Advance.
Srinivasan

How to view the detailed data from the Planing cube.

Hi friends , we are having one planning cube which end use will enter the data in to this cube using query input layout.
End user want to view the data which he has loaded in to the realtime cube to cross verify.
I try to build this through the query designer on real time cube but iam getting aggrigated values. i need the detailed log , how to achieve this . There is no DSO to develop the query. do i need to use the planning moduler for this or any other alternative.
Could any one has the solution for this.
Regards,
Sruthi.

Hi , i put all the characteristics in the drill down bu iam not getting the detailed log, as you know iam getting the aggrigated summ of the values are displaying.
For Ex user will enter the below mentioned values in to Real time cube
Fiscal Period   Customer Values Currency
006.2008            20000      $6          USD
006.2008            20001       $6          USD
006.2008            20010       $6          USD
above values are in the cube but when u try to display those valus using the query designed you will get sum of $18 , my requirement is to display table as it shown above.
Pls help me on this.
Sruthi.

How to view the details of the signature

I received an application (JAD and JAR), the jad is signed, however I do not know the issuer of the signature. Is there a tool to view the signature details of an application? The signature is available in the jad file under the attributes:
MIDlet-Certificate-1-1:
MIDlet-Jar-RSA-SHA1:
MIDlet-Certificate-1-2:
Thanks

Do you use Wireless Toolkit ? If yes, check User Guide (chapter 6 Security and MIDlet Signing in WTK 2.5.1). As far as I understand, guide suggests to [use the MIDlet signing window|http://i44.tinypic.com/2qbvbwp.jpg] to work with certificates.

Tcode or table to view the details of user

Hello Experts
Can anybody tell the TCode or Table which tells the details of user with the report used by them on last used date.
Thanks in Advance
Neha

Ha ve a look at all the RSDDSTAT* tables if BI statistics is active, you might also want to install the relevant BI content to facilitate its analysis. If BI statistics is inactive you'll need to activate it before you can do any such analysis (RSA1: Tools menu).
Eric

Error while trying to view the details table from Show/Hide icon

What we are having is two tables, Outer and Inner, having Outer VO and Inner VO,outer VO is linked with inner VO. Now when I am trying to view the inner table
through Show/Hide icon to see the details of the table ,I am getting an error like ...
The record with primary key values {2280} could not be found in view object MisForecastHeadOfiiceAM.InnerTableVO_OuterInnerVL_InnerTableVO.
I want to know how this error can be resolved

Hi Abdul,
We are not getting error while searching. As said earlier
While search for the first time > We could see proper results in out table and Even show/hide is working fine and display correct data in Inner table
When searching for the second time with different criteria > We could see proper results in outer table and on clicking show/hide (to view inner table data), we are getting error.
The record with primary key values {2280} could not be found in view object AM.ViewLinkVL_InnerTableVO
From the error message, we found that its trying to get the row (of inner table) pertaining to first search results and not for the outer table row in context to second search results.

Using RMAN restore the database on a new host in ASM

Hello All,
I am trying to restore a database without using RMAN database duplicate. I want to do set new name for datafile and rename log file for online logs and change database name at last using NID.
here are details
source database - APSPROD / server - X
target database - EMERALD / Server -Y
Compressed backup is copied to destination server and I am trying to restore database using RMAN. Here is my init.ora file
cat initAPSPROD1.ora
DB_NAME=APSPROD
compatible=11.2.0.3
sga_target=8G
CONTROL_FILES='+DATA_DM01/EMERALD/controlfile/cntrl01.dbf','+RECO_DM01/EMERALD/controlfile/cntrl02.dbf','+DATA_DM01/EMERALD/controlfile/cntrl03.dbf'
DB_BLOCK_SIZE=8192
db_file_name_convert=(+DATA_DM01/APSPROD,+DATA_DM01/EMERALD)
log_file_name_convert=(+DATA_DM01/APSPROD,+DATA_DM01/EMERALD,+RECO_DM01/APSPROD,+RECO_DM01/EMERALD)
DB_RECOVERY_FILE_DEST='+RECO_DM01'
DB_RECOVERY_FILE_DEST_SIZE=5500G
So from above you can see that control file should be restored to +DATA_DM01/EMERALD and +RECO_DM01/EMERALD path.
Question -
when I am trying to restore control file. It creates an ASM alias name in +DATA_DM01/EMERALD/controlfile/cntrl01.dbf',+RECO_DM01/EMERALD/controlfile/cntrl02.dbf',' and +DATA_DM01/EMERALD/controlfile/cntrl03.dbf' but It creates fully Qualified ASM Filename under +DATA_DM01/APSPROD and +RECO_DM01/
Here is output
RMAN> restore controlfile from '/dbfs_direct/FS1/RMAN_APSPROD/cf_APSPROD_i4p4b62m_1_1
2> ;
Starting restore at 02-APR-14
using channel ORA_DISK_1
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
output file name=+DATA_DM01/emerald/controlfile/cntrl01.dbf
output file name=+RECO_DM01/emerald/controlfile/cntrl02.dbf
output file name=+DATA_DM01/emerald/controlfile/cntrl03.dbf
Finished restore at 02-APR-14
output at ASM level
SMCMD [+RECO_DM01/EMERALD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
                                               N    cntrl02.dbf => +RECO_DM01/APSPROD/CONTROLFILE/current.17006.843826701
ASMCMD [+RECO_DM01/EMERALD/CONTROLFILE] > cd +RECO_DM01/APSPROD/CONTROLFILE/
ASMCMD [+RECO_DM01/APSPROD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
CONTROLFILE HIGH    FINE     APR 02 12:00:00 Y    current.17006.843826701
ASMCMD [+RECO_DM01/APSPROD/CONTROLFILE] > cd +DATA_DM01
ASMCMD [+DATA_DM01] > cd EMERALD/CONTROLFILE
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
                                               N    cntrl01.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3678.843826699
                                               N    cntrl03.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3679.843826701
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > cd +DATA_DM01/APSPROD/CONTROLFILE
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
CONTROLFILE HIGH    FINE     APR 02 12:00:00 Y    current.3678.843826699
CONTROLFILE HIGH    FINE     APR 02 12:00:00 Y    current.3679.843826701
How can I ensure that every thing gets created in +DATA_DM01/EMERALD/ or [+RECO_DM01/EMERALD?? similary for datafile restore even I have used set new file name ASM fully quilified OMF datafile gets created under +DATA_DM01/APSPROD/
ASMCMD [+DATA_DM01/EMERALD/DATAFILE]
N    undots5_01.dbf => +DATA_DM01/APSPROD/DATAFILE/APPS_UNDOTS5.3669.843818269
Thanks
PV

Even If I explicitly say
rman target / nocatalog
RMAN> restore controlfile to '+DATA_DM01/emerald/controlfile/cntrl01.dbf' from '/dbfs_direct/FS1/RMAN_APSPROD/cf_APSPROD_i4p4b62m_1_1';
Starting restore at 02-APR-14
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=64 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
Finished restore at 02-APR-14
It create as alias name +DATA_DM01/emerald/controlfile/cntrl01.dbf' pointing to +DATA_DM01/APSPROD/CONTROLFILE/
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
                                               N    cntrl01.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3679.843828927
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > cd +DATA_DM01/APSPROD
ASMCMD [+DATA_DM01/APSPROD] > cd CONTROLFILE
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
CONTROLFILE HIGH    FINE     APR 02 12:00:00 Y    current.3679.843828927
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] >

Urgent! This is the code i tried using to display the images

I've created a ImagePanel class
class ImagePanel extends Applet
MediaTracker mt = new MediaTracker(this);
// Image Filename;
private String filename;
//Image instance
Image image = null;
//Default Constructor
public ImagePanel()
//Set Image and show it
public void showImage(Image image)
mt.addImage(image,1);
try
mt.waitForAll();
}//try
catch(InterruptedException e){}
this.image = image;
this.repaint();
}//showImage
//Draw the image on the panel
public void paintComponent(Graphics g)
super.paintComponents(g);
if(image != null)
g.drawImage(image,0,0,getWidth(),getHeight(),this);
}//image panel
in the distance class:
i decleared a imagePanel object and
private ImagePanel lblImage = new ImagePanel();
i've decleared a image
Image logo;
this is what i did to get the image
logo = getImage(getCodeBase(),"smcrest.gif");
to display the image i used
lblImage.showImage(logo);
I don't know what id did wrong

You might try to add a JTextPane. I use them for my "regular" apps, that are not applets. Not sure if this applies to applets but check out the refence material. After you create a JTextPane one line of code does it:
JTextPane jtextpane = new JTextPane();
jtextpane.insertIcon(new ImageIcon("Images\\FOO.gif"));
I use grid bag layout so I then do the following:
try
     constraints.gridx = 0;                              //create new row & ADD IMAGE in TEXTPANE
     constraints.fill = constraints.BOTH;
     layout.setConstraints(jtextpane, constraints);
     getContentPane().add(jtextpane);
     catch(Exception e)
     System.out.println("EXCEPTION: ViewFrame.contentPane.add : " + e);
     }

Waht t-code do I use to view the details of a new customer?

Similar Messages

Maybe you are looking for