Wait dialog for WinForm Reportviewer

Hello,
I have a winform (c#) apllication that uses the crystal report 2008 viewer to show some reports.
I would like to know if it's possible to show a waitdialog while the viewer is loading the report document or after the user changes the report parameter values on the parameter panel.
For some of my reports the load operation is very long because i have of lot of data, and I would like to show a wait dialog like the one that is shown automatically for the asp.net crystal report viewer.
Does anybody know how I can solve my problem.
Thanks in advance
Kind regards
Giovanni Perrone

See this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18419150&messageID=6038873
Ludek

Similar Messages

Copy paste text from pdf exported from Microsoft.Reporting.WinForms.ReportViewer control with Czech specific characters produced box charactex or ?.

Used Visual studio 2012. In our project there is used the Microsoft.Reporting.WinForms.ReportViewer control. In the report handled by the control are TextBoxs with a text with Czech specific characters e.g. (ř, ě, ...) . When exporting the report to pdf,
characters are displayed correctly. However when the text with czech characters in the pdf if copied and placed into the seach box in the pdf document only box characters are displayed. The TextBox in the report use the default font Arial. When the report
is exported to Word, and then the Word document is saved as a pdf document, its ok. Coping a text with Czech charactes in the result pdf document and pasting into the search box displays again Czech characters not box characters.
Also when in the report handled by the ReportViewer control are several Tex Boxes and some of the boxes contains Czech characters and some not, after exporting to a pdf document there is problem with text selection. When in the pdf document I'm trying to
select several paragraphs, some with Czech characters and some without them, selection behaves strangely and jumps from one paragraph to another unexpectedly.

Hi,
did you managed to avoid those squares?
BTW: if any such char. is encountered in a line, the entire line of text is grabbled.
I've tried even the ReportViewer from MSSQL 2014, but got the same problem. When I've tried IL Spy, I found a code, where it is checked if the PDFFont is composite - depending on that a glyph is created. But that still only a guess.
I've tried Telerik's reporting, they have similar problem (beside other), but not with the special characters. They produced scuares for some sequences like: ft, fi, tí.
Please give any info you got.
Until then my advices for you:
a) try JasperReports (seems theyre most advanced, although it is java)
b) Developer express has quiet quality reports - and it seems they got those special chars. right :D
c) I created a ticket and waiting for Telerik's response (but if I had to choose reporting, I vould stick with a) or b)

I need a code that allows me to show a "Please Wait" Dialog while performing a lengthy operation

Hi,
I have very basic knowledge of C++ and I don't understand completely how this works. I have been trying to use pthreads in order to be able to show a "Please Wait" Dialog while performing a lengthy operation. The problem is that the dialog
box is showing up with a blank box where the label should go. Could you please modify the following code so that the program does what I am looking for? (note that I have pasted the sections of the program I think are useful for someone to provide an answer).
void *run_optimization( void *ptr );
void *run_optimization( void *ptr )
Solution x = Optimizer(); // Lengthy operation
const int * const SolArray = x.getDiscreteSolution();
return 0;
namespace RCM {
private: System::Void button2_Click(System::Object^ sender, System::EventArgs^ e) {
Processing^ Proc = gcnew Processing();
Proc->Show(); // this is the "Please Wait" Dialog
pthread_t thread1;
int ret1;
ret1 = pthread_create( &thread1, NULL, run_optimization, NULL);
pthread_join( thread1, NULL);
Thank you!!
EDIT:
I have tried the following:
void *run_optimization( void ^ptr );
void *run_optimization( void ^ptr )
Processing^ Proc = (Processing ^)ptr;
Solution x = Optimizer(); // Lengthy operation
const int * const SolArray = x.getDiscreteSolution();
Proc->Close();
return 0;
namespace RCM {
private: System::Void button2_Click(System::Object^ sender, System::EventArgs^ e) {
Processing^ Proc = gcnew Processing();
pthread_t thread1;
int ret1;
ret1 = pthread_create( &thread1, NULL, run_optimization, (void *)Proc);
Proc->Show(); // this is the "Please Wait" Dialog
But I am getting the following error:
error C2440: 'type cast' : cannot convert from 'RCM::Processing ^' to 'void *'

Hi Shu!
It runs in windows. I am using Visual Studio 2010 (and I can't use another version) which still doesn't have the threads integrated as I have read. So I am using POSIX threads for windows.
Regarding the other question, I don't really know what either of those (.net framework library or native API) mean. I am sorry but I am really new at this and really don't know much but I am doing my best because I have to get this done.
I only know basic C++ but had to use C++/CLI windows forms because of a code I integrated in my program for running macros in excel and it was in C++/CLI.
Thank you for your help!
You cannot pass a managed handle to void* (as you have discovered).
If you really want to use Posix threads, you probably need to make your Processing class a normal C++ class, not a C++/CLI ref class.
But the .NET way to do this would be to use a BackgroundWorker:
https://msdn.microsoft.com/en-us/library/system.componentmodel.backgroundworker%28v=vs.110%29.aspx
David Wilkinson | Visual C++ MVP

How to..Show a wait dialog when data loads, then hide once data loads

Description: This code will have the SAP default wait dialog become visible when the page loads and hidden after the data is returned for the table.
1. Place this code within the head tags.
<head>
<SCRIPT Language="JavaScript">
function show_wait_dialog () {
document.body.style.cursor = "wait";
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("display", "block", false);
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("visibility", "visible", false);
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("overflow", "auto", false);
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("width", "255", false);
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("left", document.body.offsetWidth/2-125, false); document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("top",
document.body.offsetHeight/2-38, false);
function hide_wait_dialog () {
document.body.style.cursor = "auto";
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("display", "block", false);
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("visibility", "hidden", false);
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("overflow", "auto", false);
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("width", "255", false);
document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("left", document.body.offsetWidth/2-125, false); document.getElementById("SAPBWProcessBoxSpan").style.setAttribute("top", document.body.offsetHeight/2-38, false);
</script>
</head>
2. Place this code right after the <body> tag.
<body>

<script>
show_wait_dialog()
</script>
3. Lastly, place this code below right after the Table Item and before the </body> tag. (in this case GR1Table)
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="GR1Table"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DP"/>
         <param name="WIDTH" value="700"/>
         <param name="BLOCK_SIZE" value="3000"/>
         <param name="SHOW_PAGING_AREA_TOP" value="X"/>
         <param name="HELP_SERVICE" value="ZPRINTING"/>
         <param name="HELP_SERVICE_CLASS" value="Z_PRINTING_HELP_SERVICE"/>
         ITEM:            GR1Table
</object></P>
<P>
<!New code --
<script>
hide_wait_dialog ()
</script>
</body>

This is very helpful. Thanks.

Automated wait cursor + wait dialog

Hello to all,
in our multiclient-multiserver application we found the following problem, which should be solved, but the solution we cannot find, maybe someone knows somehing about this.
Some servers are connected, this server communicates together, replicates datas, so there are some redundant databases, and the operations implemented on server side, are a little bit time consuming ( to execute some functions, takes 20s -> 20m :( ) and we cannot improve this performance, we are only working on lcinet side. So customer needs some information, hourglass, and after Nseconds (e.g. N = 5s) dialog displaying animated icon, to show that there is some progress on server side. So we want to implement general solution to display hourglass, and our waitdialog. At javawolrd we found out techtip 87, it describes how to automate hourglass appearing ( EventQueue replacement with our custom), we want to adapt this technique to display wait dialog.
So our goal is waiting for server to coplete some operatons,automate hourglass and dialog siplaying, after M second (e.g. 0.5s) show hourglass, and after N seconds after operation start show a dialog diplaying some message.
Is there a solution ?
Thanks
Adrian.

Hi,
you could use a progress monitor,
see
http://java.sun.com/docs/books/tutorial/uiswing/components/progress.html
and http://java.sun.com/j2se/1.4.1/docs/api/javax/swing/ProgressMonitor.html

Maintenance dialog for table

Hello folks,
I had successfully created a table and I tried inserting some records in to the table using table maintenance.
I received the following error.
'The maintenance dialog for table zxxx is incomplete or not defined'.
What does this mean?? And what should I do??
I am pasting the detail help over this error.
The maintenance dialog for ZTV_DBS_RANGE_NO is incomplete or not defined
Message no. SV 037
Diagnosis
The called function with the view/table ZTV_DBS_RANGE_NO needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.
Please help

You have to create the maintenance dialog for table you would like to use with transaction SM30 / SM31.
To do this look the transaction SE55.
(or SE11, select the table, MODIFY, (menu) Utilities -> Maintain dialog ... )
Regards
Frédéric
Message was edited by: Frédéric Girod

HT201263 my Iphone 3GS keeps freezing and shutting down, now wont turn on all the way just goes to apple icon. Tried to update and recover but it would get stuck and at about 20% in restore and go no where, waited 5hrs for it to move and nothing. Help?

My ATT Iphone 3GS keeps freezing and shutting down, now won't turn on at all. tried to do an update and restore but it froze in restore at about 20% done, waited 5hrs for it to go, it didn't. Not sure what to do or where to go (ATT or Apple) to get help, how much it could cost? HELP PLEASE!

Did you follow the steps in iOS: Unable to update or restore?

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

Waiting list for Apple Store for iPad

Hi All,
I put my name on the preferred waiting list for the iPad at my local apple store (Mass) on July 11th. The first time I talked to someone, he said it would take 2 weeks. The next time I talked to someone they said it would take a couple of days. Then I talked to someone else and he said "it could take a couple of days or a couple of months, we don't know".
This seems very strange to me because you would think that corporate or some subsidiary would notify the retail store of an upcoming shipment of an extremely popular product. I work in marketing and sales, and I know that when i have a large shipment for a customer, we notify them when their product is coming.
So my question is what is with the lack of information?
Anyone else that has been on the preferred waiting list: what was your experience like? How long did you have to wait? (FYI: it is a 16 GB WiFi only model).
Thank you for your time.
-Matt

m3brown wrote:
Hi All,
I put my name on the preferred waiting list for the iPad at my local apple store (Mass) on July 11th. The first time I talked to someone, he said it would take 2 weeks. The next time I talked to someone they said it would take a couple of days. Then I talked to someone else and he said "it could take a couple of days or a couple of months, we don't know".
This seems very strange to me because you would think that corporate or some subsidiary would notify the retail store of an upcoming shipment of an extremely popular product. I work in marketing and sales, and I know that when i have a large shipment for a customer, we notify them when their product is coming.
So my question is what is with the lack of information?
Anyone else that has been on the preferred waiting list: what was your experience like? How long did you have to wait? (FYI: it is a 16 GB WiFi only model).
Thank you for your time.
-Matt
You should just order it online. I think that supply is tight for the device everywhere.
Apple does things differently. You might be on a list, but it could have 200 names on it. They'd call you if it was available for you (more likely they'd email).
Really, if you had ordered online, you'd have it by now.

Problem with a maintenance dialog for a table

Hi,
I created a table (ztable) with transaction code SE11 and a transaction (ztransaction) with SE93 to manage this table (ztable).
When I use the transaction "ztransaction", I have a message like this :
"The maintenance dialog for ZTABLE is incomplete or not defined".
What can I do ? How can I complete or define the maintenance dialog ?
Thanks in advance.
Regards.
C.

First after creating a table you should creat a Table maintenance generator.
Utilities -> Table Maintenance Generator .
After creating Maintenance goto
Environment -> Transaction
This will succesfully create a transaction for your table
You should give parameters while creating the transaction.
UPDATE = 'X'
VIEWNAME = your table name
Bhupal

Find the Wait events for an objects.

Hi Gurus.
I need you help to find out the wait events for a particular table and index when batch export job running from the application. I have done some work around to to find out, but i am not able to figure out the issue or what are the wait events. i am working on linux 4node rac 11gR2.
Below are the steps i have done.
1. find object_id for a table finding the wait events to that object_id.
SYS@ccmintpt1 SQL>select data_object_id from dba_objects where object_name='ACCOUNT_DETAIL_DENORM';
DATA_OBJECT_ID
82646
88518
84184
SYS@ccmintpt1 SQL>select w.sid,w.event,w.wait_class,w.wait_class# from gv$session s,gv$session_wait w where s.row_wait_obj#=82646;
no rows selected
SYS@ccmintpt1 SQL>select w.sid,w.event,w.wait_class,w.wait_class# from gv$session s,gv$session_wait w where s.row_wait_obj#=88518;
no rows selected
SYS@ccmintpt1 SQL>select w.sid,w.event,w.wait_class,w.wait_class# from gv$session s,gv$session_wait w where s.row_wait_obj#=84184;
no rows selected
2. find the object id for the index of that table and finding the wait events to that object_id.
SYS@ccmintpt1 SQL>select data_object_id from dba_objects where object_name='XAK2ACCOUNT_DETAIL_DENORM';
DATA_OBJECT_ID
88655
SID EVENT WAIT_CLASS WAIT_CLASS#
1 rdbms ipc message Idle 6
2 heartbeat monitor sleep Idle 6
3 rdbms ipc message Idle 6
4 wait for unread message on broadcast channel Idle 6
6 SQL*Net message from client Idle 6
7 SQL*Net message from client Idle 6
8 SQL*Net message from client Idle 6
9 SQL*Net message from client Idle 6
10 SQL*Net message from client Idle 6
11 SQL*Net message from client Idle 6
12 SQL*Net message from client Idle 6
13 SQL*Net message from client Idle 6
1876 SQL*Net message from client Idle 6
1877 VKTM Logical Idle Wait Idle 6
1878 rdbms ipc message Idle 6
1879 rdbms ipc message Idle 6
1880 rdbms ipc message Idle 6
1881 SQL*Net message from client Idle 6
3200 SQL*Net message from client Idle 6
3210 SQL*Net message from client Idle 6
3212 db file sequential read User I/O 8
3213 SQL*Net message from client Idle 6
3214 SQL*Net message from client Idle 6
3216 SQL*Net message from client Idle 6
3751 rdbms ipc message Idle 6
3752 gcs remote message Idle 6
3754 rdbms ipc message Idle 6
3756 SQL*Net message from client Idle 6
3757 SQL*Net message from client Idle 6
1326 SQL*Net message from client Idle 6
1876 Streams AQ: waiting for time management or cleanup tasks Idle 6
1877 VKTM Logical Idle Wait Idle 6
1878 rdbms ipc message Idle 6
1879 rdbms ipc message Idle 6
1880 rdbms ipc message Idle 6
1882 SQL*Net message from client Idle 6
3751 rdbms ipc message Idle 6
3752 gcs remote message Idle 6
3754 rdbms ipc message Idle 6
3756 rdbms ipc message Idle 6
3758 SQL*Net message from client Idle 6
3759 PX Deq: Execution Msg Idle 6
3200 SQL*Net message from client Idle 6
3210 SQL*Net message from client Idle 6
3212 db file sequential read User I/O 8
3213 SQL*Net message from client Idle 6
3214 SQL*Net message from client Idle 6
3216 SQL*Net message from client Idle 6
3751 rdbms ipc message Idle 6
3752 gcs remote message Idle 6
3754 rdbms ipc message Idle 6
3756 SQL*Net message from client Idle 6
3757 SQL*Net message from client Idle 6
3786 SQL*Net message from client Idle 6
3787 SQL*Net message from client Idle 6
1 heartbeat monitor sleep Idle 6
2 wait for unread message on broadcast channel Idle 6
314 rdbms ipc message Idle 6
315 Streams AQ: qmn coordinator idle wait Idle 6
627 pmon timer Idle 6
628 rdbms ipc message Idle 6
629 Streams AQ: waiting for messages in the queue Idle 6
940 Streams AQ: waiting for time management or cleanup tasks Idle 6
941 VKTM Logical Idle Wait Idle 6
942 rdbms ipc message Idle 6
1253 rdbms ipc message Idle 6
1254 rdbms ipc message Idle 6
1256 Space Manager: slave idle wait Idle 6
1566 DIAG idle wait Idle 6
1567 rdbms ipc message Idle 6
1568 Streams AQ: qmn slave idle wait Idle 6
1879 rdbms ipc message Idle 6
1880 smon timer Idle 6
1881 rdbms ipc message Idle 6
2192 PING Idle 6
2193 rdbms ipc message Idle 6
2194 rdbms ipc message Idle 6
2505 rdbms ipc message Idle 6
2506 rdbms ipc message Idle 6
2818 rdbms ipc message Idle 6
2819 rdbms ipc message Idle 6
2821 PX Deq: reap credit Other 0
3131 DIAG idle wait Idle 6
3132 jobq slave wait Idle 6
3444 rdbms ipc message Idle 6
3445 jobq slave wait Idle 6
3757 ges remote message Idle 6
3758 rdbms ipc message Idle 6
3759 VKRM Idle Idle 6
4070 gcs remote message Idle 6
4072 rdbms ipc message Idle 6
4383 gcs remote message Idle 6
4385 PX Deq: Execution Msg Idle 6
4696 rdbms ipc message Idle 6
4697 rdbms ipc message Idle 6
1 rdbms ipc message Idle 6
2 heartbeat monitor sleep Idle 6
3 rdbms ipc message Idle 6
4 wait for unread message on broadcast channel Idle 6
6 SQL*Net message from client Idle 6
From this output, what are the waits events i need to take into consideration.
Is this the right approach to follow?
Please let me know.
Thanks in advance.

user13162661 wrote:
Hi Gurus.
I need you help to find out the wait events for a particular table and index when batch export job running from the application. I have done some work around to to find out, but i am not able to figure out the issue or what are the wait events. i am working on linux 4node rac 11gR2.
Below are the steps i have done.
1. find object_id for a table finding the wait events to that object_id.
SYS@ccmintpt1 SQL>select data_object_id from dba_objects where object_name='ACCOUNT_DETAIL_DENORM';
DATA_OBJECT_ID
82646
88518
84184
SYS@ccmintpt1 SQL>select w.sid,w.event,w.wait_class,w.wait_class# from gv$session s,gv$session_wait w where s.row_wait_obj#=82646;
no rows selected
SYS@ccmintpt1 SQL>select w.sid,w.event,w.wait_class,w.wait_class# from gv$session s,gv$session_wait w where s.row_wait_obj#=88518;
no rows selected
SYS@ccmintpt1 SQL>select w.sid,w.event,w.wait_class,w.wait_class# from gv$session s,gv$session_wait w where s.row_wait_obj#=84184;
no rows selected
2. find the object id for the index of that table and finding the wait events to that object_id.
SYS@ccmintpt1 SQL>select data_object_id from dba_objects where object_name='XAK2ACCOUNT_DETAIL_DENORM';
DATA_OBJECT_ID
88655
SID EVENT WAIT_CLASS WAIT_CLASS#
1 rdbms ipc message Idle 6
2 heartbeat monitor sleep Idle 6
3 rdbms ipc message Idle 6
4 wait for unread message on broadcast channel Idle 6
6 SQL*Net message from client Idle 6
7 SQL*Net message from client Idle 6
8 SQL*Net message from client Idle 6
9 SQL*Net message from client Idle 6
10 SQL*Net message from client Idle 6
11 SQL*Net message from client Idle 6
12 SQL*Net message from client Idle 6
13 SQL*Net message from client Idle 6
1876 SQL*Net message from client Idle 6
1877 VKTM Logical Idle Wait Idle 6
1878 rdbms ipc message Idle 6
1879 rdbms ipc message Idle 6
1880 rdbms ipc message Idle 6
1881 SQL*Net message from client Idle 6
3200 SQL*Net message from client Idle 6
3210 SQL*Net message from client Idle 6
3212 db file sequential read User I/O 8
3213 SQL*Net message from client Idle 6
3214 SQL*Net message from client Idle 6
3216 SQL*Net message from client Idle 6
3751 rdbms ipc message Idle 6
3752 gcs remote message Idle 6
3754 rdbms ipc message Idle 6
3756 SQL*Net message from client Idle 6
3757 SQL*Net message from client Idle 6
1326 SQL*Net message from client Idle 6
1876 Streams AQ: waiting for time management or cleanup tasks Idle 6
1877 VKTM Logical Idle Wait Idle 6
1878 rdbms ipc message Idle 6
1879 rdbms ipc message Idle 6
1880 rdbms ipc message Idle 6
1882 SQL*Net message from client Idle 6
3751 rdbms ipc message Idle 6
3752 gcs remote message Idle 6
3754 rdbms ipc message Idle 6
3756 rdbms ipc message Idle 6
3758 SQL*Net message from client Idle 6
3759 PX Deq: Execution Msg Idle 6
3200 SQL*Net message from client Idle 6
3210 SQL*Net message from client Idle 6
3212 db file sequential read User I/O 8
3213 SQL*Net message from client Idle 6
3214 SQL*Net message from client Idle 6
3216 SQL*Net message from client Idle 6
3751 rdbms ipc message Idle 6
3752 gcs remote message Idle 6
3754 rdbms ipc message Idle 6
3756 SQL*Net message from client Idle 6
3757 SQL*Net message from client Idle 6
3786 SQL*Net message from client Idle 6
3787 SQL*Net message from client Idle 6
1 heartbeat monitor sleep Idle 6
2 wait for unread message on broadcast channel Idle 6
314 rdbms ipc message Idle 6
315 Streams AQ: qmn coordinator idle wait Idle 6
627 pmon timer Idle 6
628 rdbms ipc message Idle 6
629 Streams AQ: waiting for messages in the queue Idle 6
940 Streams AQ: waiting for time management or cleanup tasks Idle 6
941 VKTM Logical Idle Wait Idle 6
942 rdbms ipc message Idle 6
1253 rdbms ipc message Idle 6
1254 rdbms ipc message Idle 6
1256 Space Manager: slave idle wait Idle 6
1566 DIAG idle wait Idle 6
1567 rdbms ipc message Idle 6
1568 Streams AQ: qmn slave idle wait Idle 6
1879 rdbms ipc message Idle 6
1880 smon timer Idle 6
1881 rdbms ipc message Idle 6
2192 PING Idle 6
2193 rdbms ipc message Idle 6
2194 rdbms ipc message Idle 6
2505 rdbms ipc message Idle 6
2506 rdbms ipc message Idle 6
2818 rdbms ipc message Idle 6
2819 rdbms ipc message Idle 6
2821 PX Deq: reap credit Other 0
3131 DIAG idle wait Idle 6
3132 jobq slave wait Idle 6
3444 rdbms ipc message Idle 6
3445 jobq slave wait Idle 6
3757 ges remote message Idle 6
3758 rdbms ipc message Idle 6
3759 VKRM Idle Idle 6
4070 gcs remote message Idle 6
4072 rdbms ipc message Idle 6
4383 gcs remote message Idle 6
4385 PX Deq: Execution Msg Idle 6
4696 rdbms ipc message Idle 6
4697 rdbms ipc message Idle 6
1 rdbms ipc message Idle 6
2 heartbeat monitor sleep Idle 6
3 rdbms ipc message Idle 6
4 wait for unread message on broadcast channel Idle 6
6 SQL*Net message from client Idle 6
From this output, what are the waits events i need to take into consideration.
Is this the right approach to follow?
Please let me know.
Thanks in advance.what actual problem are you trying to solve?
post SQL & results that have you concerned about wait events

What does the option 'Settings- incorrect waiting time for status' do ?

Hi All
We had an infopackage that seemed to be hanging this morning . (Yellow Status) I was advised to access the option 'Settings->incorrect waiting time for status' and set the wait time to 7 minutes (from 7 hours). This changed the status to Red.
I then re-ran the ipak and reset the ''Settings->incorrect waiting time for status' to 7 hours. This made the red process go back to yellow and the run time started going up again.
Can someone explain what is going on. Have I got 2 instances of the same ipak running simulateously. Why did the red one come back to life even thoug I deleted the request in data target for that ipak.
Thanx
HKF

Thanks, Verdi - the first time I enabled,/ or disabled, I hadn't realised what had actually changed, as I think I'm so used to seeing my links open in Safari anyway!

Implement own personalization dialog for Web Dynpro iView

How can I implement an own personalization dialog for a Web Dynpro iView? It should open a popup window and in it a internet url.

Check this thread https://forums.sdn.sap.com/click.jspa?searchID=954028&messageID=2300962
Regards, ANilkumar

The maintenance dialog for V_AISUSER is incomplete or not defined

I was not able to assign S-user for SAP Support Portal functionality from SPRO. I received this error and my ABAPer didn't seem to able to help...would anyone ever got this error message and/or know how the resolution?
The maintenance dialog for V_AISUSER is incomplete or not defined
Message no. SV037
Diagnosis
The called function with the view/table V_AISUSER needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.
Thank you in advance for your assistance.
Regards,
Franc

Hi Nesimi,
I wasnot able to maintain the "assign S-user fro SAP Support Portal functionality" by drilling down the following path from SPRO>SAPSolMan>Configuration>Basic Settings>Standard Config of Basic Settings>SolMan>Connection to SAP-->Assign S-user for SAP Support Portal functionality.
I have to follow the following path to maintain Table "AISUSER" = SPRO>SAP SolMan>Config>Scenario-Specific Settings>Service Desk>Service Provider SW Partner>Maintain Table AISUSER.
What's a ditto...
Thank you again for your time.
Cheers,
Franc Nguyen

Ibooks in waiting mode for two days when trying to update?

I have attamepted to update ibooks, however it has been in waiting mode for two days now and won't complete...???

Hello jzicarelli1
Try deleting iBooks and then download it again to get it to show up again. Check out the article below for further troubleshooting options.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

Wait dialog for WinForm Reportviewer

Similar Messages

Maybe you are looking for